5220 RM-411 Contact Service
#1
Есть телефон, после потверждения включения, писал Conact Service и отключался, считал инфо JAFом, Universalом в телефоне были повреждения sim-lock, заказал РПЛ, расчитали, пробовал пролить его DSS, не получилось, зашил его JAFом, информация о поврежденной sim-lock зоне исчезла, но неисправность осталась, решил сделать стирание вот этим файлом BB5Erase_64MBrap, и стандартную схему. Стер его Universalом
Вот лог
Код:
MCU Nokia Version: 1.126, and up to date.
SMCU Nokia Version: 1.42, and up to date.
Flashing file:
BB5 [BB5 ALGORITHM] MCU File: ReadKeys 0 kB
Speed: [3000k, 3250k, 3250k, 98k] Baud.
Input power: 4,49V OK.
Output power at Line1 3,95V is in range of: 4,00V ±10,0%
Asic ID: 000000010000022600010006030C192101033000
EM Asic ID: 00000295
EM Asic ID: 00000B22
Public ID: 1240011809DE55503B9B088EDFBB79B93FCDEEC4
Asic Mode ID: 00
Hash: 9DDBFCFE6E73CED7D8C6268C8EB85723
ROM ID: 273F6D55DFAAF68F
--------------------------------------------------------------------------------
TBB5ErasePhoneThread 2.7.7.2090 finished at: 2009.06.09 15:49:51
Terminated with error: No available bootloader for this ID, probably bad cable [0001105A]
MCU Boot Version: 1.069, and up to date.
SMCU Boot Version: 1.34, and up to date.
Device opened at USB->Universal Box [UBECAQ0A]
TDCT4ErasePhoneThread 2.7.7.2090 started at: 2009.06.09 15:51:04
--------------------------------------------------------------------------------
MCU Nokia Version: 1.126, and up to date.
SMCU Nokia Version: 1.42, and up to date.
Flashing file:
BB5 [BB5 ALGORITHM] MCU File: BB5Erase_64MBrap.sit 0 kB
Speed: [51k, 6500k, 6500k, 98k] Baud.
Input power: 4,51V OK.
Output power at Line1 3,95V is in range of: 4,00V ±10,0%
Boot Loader: RAP3Gv3_2nd.fg 15 kB
Version: 1.30.0
Supported Hardwares: [0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002]
Max Flash Devices: 2
Flash ID 1: 00898982 - 0000 Rev: 0000 Manufacturer: Intel MSB: 00 SectorSize: 0x010000
Flash ID 2: FFFF0000 - 0000 Rev: 0000 Manufacturer: Unknown MSB: 00 SectorSize: 0x010000
Signature: 00000000000000000000000000000000
Flash Loader: RAP3Gv3_algo.fg 166 kB
Version: 1.31.0
Supported Hardwares: [0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0003192101002000, 000C192101002000, 0003192101002100, 000C192101002100, 0003192101002200, 000C192101002200, 0003192101012200, 000C192101012200, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002]
Using RX2 flash.
Asic ID: 000000010000022600010006030C192101033000
EM Asic ID: 00000295
EM Asic ID: 00000B22
Public ID: 1240011809DE55503B9B088EDFBB79B93FCDEEC4
Asic Mode ID: 00
Hash: 9DDBFCFE6E73CED7D8C6268C8EB85723
ROM ID: 273F6D55DFAAF68F
SecHash: D93826B23E9B093BE4DD7304FBAA6778996AE60B
Erase time: 5:44,9 sec.
Total time: 6:03,0 sec.
Смутило вот это
Terminated with error: No available bootloader for this ID, probably bad cable [0001105A] и это Flash ID 2: FFFF0000 - 0000 Rev: 0000
Manufacturer: Unknown MSB: 00 SectorSize: 0x010000.
Как видно на логе стереться он все-таки стерся, а вот шиться ничем больше не захотел.
Лог Universala
Код:
MCU Nokia Version: 1.126, and up to date.
SMCU Nokia Version: 1.42, and up to date.
Flashing file:
BB5 [BB5 ALGORITHM] MCU File: rm411__05.63.mcusw 20 321 kB
Speed: [3250k, 6500k, 6500k, 98k] Baud.
Supported Hardwares: [010C192101013000, 0103192101003000, 030C192101033000]
Input power: 4,45V OK.
Output power at Line1 3,95V is in range of: 4,00V ±10,0%
Asic ID: 000000010000022600010006030C192101033000
EM Asic ID: 00000295
EM Asic ID: 00000B22
Public ID: 1240011809DE55503B9B088EDFBB79B93FCDEEC4
Asic Mode ID: 00
Hash: 9DDBFCFE6E73CED7D8C6268C8EB85723
ROM ID: 273F6D55DFAAF68F
--------------------------------------------------------------------------------
TBB5FlashPhoneThread 2.7.7.2090 finished at: 2009.06.09 17:18:19
Terminated with error: No available bootloader for this ID, probably bad cable [0001105A]
MCU Boot Version: 1.069, and up to date.
SMCU Boot Version: 1.34, and up to date.
Device opened at USB->Universal Box
Вот лог чека MT-boxа
Код:
Boot...
Using Tx2 Data line.
rap3gv3_2nd.fg
Failed to find RAP3 Flash loader( damaged flash chip/damaged RAP3 chip)
Phone Type: BB5
------------------- SYSTEM ID Response: 7 blocks -------------
SYSTEM_ASIC_ID( RAP ):
000000010000022600010006030C192101033000
EM_ASIC_ID( RAP ):
00000295
EM_ASIC_ID( RAP ):
00000B22
PUBLIC_ID( RAP ):
1240011809DE55503B9B088EDFBB79B93FCDEEC4
ASIC_MODE_ID( RAP ):
00
ROOT_KEY_HASH( RAP ):
9DDBFCFE6E73CED7D8C6268C8EB85723
ROM_ID( RAP ):
273F6D55DFAAF68F
============= Set FBus mode for info =============
VBat is 4.04V
Vpp pin has 0.09V, Not Connected
Pins:
Mbus 1, Box Tx 1, Box Rx 0, Bsi 0
Смутило вот это
Failed to find RAP3 Flash loader( damaged flash chip/damaged RAP3 chip)
Хотя до стирания селф тесты проходил все и ошибок не было.
Прошивки пробовал разные - нет результата.
Ну и лог Джафа, 62 версии
Код:
Booting phone...
FAST PHONE detected!
CMT Boot Data:
Asic ID: 000000010000022600010006030C192101033000
Asic Mode ID: 00
Asic EM ID: 00000B22
Asic Public ID: 1240011809DE55503B9B088EDFBB79B93FCDEEC4
HASH: 9DDBFCFE6E73CED7D8C6268C8EB8572300000000
ROM ID: 273F6D55DFAAF68F
Error finding cmt boot file...
Последние файлы
