Z3X EasyJtag Software ver. 2.5.0.7
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 000, ,FW Ver.: 01.58
CMD Pullup Level:2145 mV
CMD Active Level:2743 mV
Box IO Level:2800 mV
CLK Rate:7000 khz
HiPower mode is ON!
---------- eMMC Device Information ----------
EMMC CID : 90014A48594E4958205C001F87732F7E
EMMC CSD : D04F01320F5903FFFFFFFFFF8A400000
EMMC Manufacturer ID: 0090 , OEM ID: 014A
EMMC Date: 02/2012 Rev.0x5C
EMMC NAME: HYNIX , S/N: 2066291
EMMC NAME (HEX): 48594E49582000
EMMC ROM1 (Main User Data) Capacity: 15160 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: Yes
Extended CSD rev 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x03
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: HYNIX _ 2066291_20170328_1731.extcsd
Done.
[свернуть]
Последние файлы
