Connect phone on selected interface...

Press and hold "U" button and insert cable! (Ignore if phone Connected)
Waiting for NOLO...
Connect in NOLO mode Ok!

Phone Info :
Type : RX-51 , HWRev : 2104
NOLO : 01/0E/14
SWVer: RX-51_2009SE_20.2010.36-2_PR_MR0
Device mode : Production mode

Read info Ok

Check : Processing RX-51_2009SE_21.2011.38-1_PR_COMBINED_MR0_ARM.bin
BLK_INF : kernel
BLK_VER : 2.6.28-20103103+0m5
==========
BLK_INF : rootfs
BLK_VER : RX-51_2009SE_21.2011.38-1_PR_MR0
==========
BLK_INF : cmt-2nd
BLK_VER : BB5_09.36
==========
BLK_INF : cmt-algo
BLK_VER : BB5_09.36
==========
BLK_INF : cmt-mcusw
BLK_VER : rx51_ICPR82_10w08
==========
BLK_INF : 2nd
BLK_VER : 1.4.14.9+0m5
BLK_THW : RX-51
==========
BLK_INF : xloader
BLK_VER : 1.4.14.9+0m5
BLK_THW : RX-51
==========
BLK_INF : secondary
BLK_VER : 1.4.14.9+0m5
BLK_THW : RX-51
==========
BLK_INF : 2nd
BLK_VER : 1.4.14.9+0m5
BLK_THW : RX-51
==========
BLK_INF : xloader
BLK_VER : 1.4.14.9+0m5
BLK_THW : RX-51
==========
BLK_INF : secondary
BLK_VER : 1.4.14.9+0m5
BLK_THW : RX-51
==========
BLK_INF : 2nd
BLK_VER : 1.4.14.9+0m5
BLK_THW : RX-51
==========
BLK_INF : xloader
BLK_VER : 1.4.14.9+0m5
BLK_THW : RX-51
==========
BLK_INF : secondary
BLK_VER : 1.4.14.9+0m5
BLK_THW : RX-51
==========
BLK_INF : 2nd
BLK_VER : 1.4.14.9+0m5
BLK_THW : RX-51
==========
BLK_INF : xloader
BLK_VER : 1.4.14.9+0m5
BLK_THW : RX-51
==========
BLK_INF : secondary
BLK_VER : 1.4.14.9+0m5
BLK_THW : RX-51
==========
BLK_INF : 2nd
BLK_VER : 1.4.14.9+0m5
BLK_THW : RX-51
==========
BLK_INF : xloader
BLK_VER : 1.4.14.9+0m5
BLK_THW : RX-51
==========
BLK_INF : secondary
BLK_VER : 1.4.14.9+0m5
BLK_THW : RX-51
==========
BLK_INF : 2nd
BLK_VER : 1.4.14.9+0m5
BLK_THW : RX-51
==========
BLK_INF : xloader
BLK_VER : 1.4.14.9+0m5
BLK_THW : RX-51
==========
BLK_INF : secondary
BLK_VER : 1.4.14.9+0m5
BLK_THW : RX-51
==========
BLK_INF : 2nd
BLK_VER : 1.4.14.9+0m5
BLK_THW : RX-51
==========
BLK_INF : xloader
BLK_VER : 1.4.14.9+0m5
BLK_THW : RX-51
==========
BLK_INF : secondary
BLK_VER : 1.4.14.9+0m5
BLK_THW : RX-51
==========
BLK_INF : 2nd
BLK_VER : 1.4.14.9+0m5
BLK_THW : RX-51
==========
BLK_INF : xloader
BLK_VER : 1.4.14.9+0m5
BLK_THW : RX-51
==========
BLK_INF : secondary
BLK_VER : 1.4.14.9+0m5
BLK_THW : RX-51
==========
BLK_INF : 2nd
BLK_VER : 1.4.14.9+0m5
BLK_THW : RX-51
==========
BLK_INF : xloader
BLK_VER : 1.4.14.9+0m5
BLK_THW : RX-51
==========
BLK_INF : secondary
BLK_VER : 1.4.14.9+0m5
BLK_THW : RX-51
==========
BLK_INF : 2nd
BLK_VER : 1.4.14.9+0m5
BLK_THW : RX-51
==========
BLK_INF : xloader
BLK_VER : 1.4.14.9+0m5
BLK_THW : RX-51
==========
BLK_INF : secondary
BLK_VER : 1.4.14.9+0m5
BLK_THW : RX-51
==========
BLK_INF : 2nd
BLK_VER : 1.4.14.9+0m5
BLK_THW : RX-51
==========
BLK_INF : xloader
BLK_VER : 1.4.14.9+0m5
BLK_THW : RX-51
==========
BLK_INF : secondary
BLK_VER : 1.4.14.9+0m5
BLK_THW : RX-51
==========
BLK_INF : 2nd
BLK_VER : 1.4.14.9+0m5
BLK_THW : RX-51
==========
BLK_INF : xloader
BLK_VER : 1.4.14.9+0m5
BLK_THW : RX-51
==========
BLK_INF : secondary
BLK_VER : 1.4.14.9+0m5
BLK_THW : RX-51
==========
Check : File Is Ok !

Press and hold "U" button and insert cable! (Ignore if phone Connected)
Waiting for NOLO...
Connect in NOLO mode Ok!

Phone Info :
Type : RX-51 , HWRev : 2104
NOLO : 01/0E/14
SWVer: RX-51_2009SE_20.2010.36-2_PR_MR0
Device mode : Production mode

Read info Ok


---Processing MCU image---

Processing NOL part
File : RX-51_2009SE_21.2011.38-1_PR_COMBINED_MR0_ARM.bin
Processing : xloader , 1.4.14.9+0m5
Processing : secondary , 1.4.14.9+0m5
NOL part Ok, boot flash done

Processing APE part
File : RX-51_2009SE_21.2011.38-1_PR_COMBINED_MR0_ARM.bin
Processing : kernel , 2.6.28-20103103+0m5
Kernel flash Ok

Processing APE part
File : RX-51_2009SE_21.2011.38-1_PR_COMBINED_MR0_ARM.bin
Processing : rootfs , RX-51_2009SE_21.2011.38-1_PR_MR0
RootFs flash Ok

Processing CMT part
File : RX-51_2009SE_21.2011.38-1_PR_COMBINED_MR0_ARM.bin
Processing : cmt-2nd , BB5_09.36
Processing : cmt-algo , BB5_09.36
Processing : cmt-mcusw , rx51_ICPR82_10w08
CMT part prepare Ok, files are sent
Program CMT request Ok

Switch : OSSO UART+USB
Version : RX-51_2009SE_21.2011.38-1_PR_MR0
Switch CMT request Ok
CMT : Erasing...
CMT : Program...
CMT : Program Finished!

Executing PostFlash : RX-51_2009SE_21.2011.38-1_PR_MR0
Executing PostFlash : Reset RD Flags
Executing PostFlash : Reboot

Done!

Elapsed: 00:01:46
Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Phone disconected!