Ошибка при восстановлении ZTE MF190
#1
Модем принесли мертвым, по словам клиента умер при прошивке.
Вот лог:
Код:
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.25, JTAG Manager Version: 1.33
Selected Resurrector: [USB Modem MF190]
Connecting to the dead body...OK
Detected dead body ID: 0x301C00E1 - CORRECT!
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Resurrection sequence started.
Establish communication with the phone...OK
Uploading resurrector data into memory...OKFAILED
Starting communication with resurrector...FAILED
ERROR: No response from the RIFF Box.
ERROR: No response from the DCC Loader. Terminating.
Так же проверил на вкладке Usefull Plugins
Код:
Resurrection sequence started.
Establish communication with the phone...OK
Uploading resurrector data into memory...OKFAILED
Starting communication with resurrector...FAILED
ERROR: No response from the RIFF Box.
ERROR: No response from the DCC Loader. Terminating.
Checking which Partition is blank...COMPLETE!
Following partitions are found to be completely blank:
Partition: SIM_SECURE at 0x00028000..0x0003FFFF (0x000A..0x000F)
Partition: OEMSBL2 at 0x0009C000..0x000E3FFF (0x0027..0x0038)
Partition: FOTA at 0x01778000..0x01893FFF (0x05DE..0x0624)
Partition: FTL at 0x01894000..0x01993FFF (0x0625..0x0664)
Все частоты уже испробовал, не помогает.
Какие есть советы?
Последние файлы
