Re: Nokia 6500c RM-397, умирает после RPL.
#14
Цитата:
Сообщение от brak0del
с русским может стоит поробывать залить PPM той же версии но от ревизии RM-265?
во всяком случае в N96 RM-472 языковой пакет от RM-247 нормально... Телефоны хоть и разные, но принцип может сгодиться.
|
Имеется данный ТА на руках (имеется заводской RPL), сейчас как раз мучаюсь с русификацией данного аппарата (пытаюсь отредактировать ppm, но пока все плохо). RM-265 залить PPM той же версии не проходит:
Лог cyclone:
Код:
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101013000
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 04D00014F1640254CDF3F0FE2079E2545A5A2C9D
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_BOOT_ROM_CRC: 273F6D55
CMT_SECURE_ROM_CRC: DFAAF68F
CMT Ready!
Processing Flash Image Failed -> Given image file is not suitable for this CMT System ASIC ID
Failed to Process all Image files -> Failed to process rm265__09.45.ppm_i
Лог МТ:
Код:
VBat is 3.94V
Vpp pin has 0.10V, Not Connected
Pins:
Mbus 1, Box Tx 1, Box Rx 1, Bsi 0
Phone is in: Local mode
Model: RM-397 ( RM-397)
V 04.92/14-12-07/RM-397 (c) Nokia
IMEI: 359848010936226
VPP is DISABLED.
Using Tx2 Data line.
Processing File: rm265__09.45.ppm_i
Boot...
MCU SW incompatible with ASIC
rap3gv3_2nd.fg
RAP3Gv3_algo.fg
Erase RAP3 [01540000 - 01BBFFFF]
Erase[6.50 MB]...
Waiting response for 132 Sec...in 17.92s
Flash[5.86 MB]...
Data Error!!
Check TX2 line!
%%%%%%%% ERROR SENDING FLASH:
Failed at address 00000000
Лог cyclone при записи родного ppm:
Код:
Processing rm397__09.45.ppm_r (CMT)...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101013000
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 04D00014F1640254CDF3F0FE2079E2545A5A2C9D
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_BOOT_ROM_CRC: 273F6D55
CMT_SECURE_ROM_CRC: DFAAF68F
CMT Ready!
rm397__09.45.ppm_r, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Searching for BootCode: DualLine 32Bit
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.9.11.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x00EC220C00008921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC220C (Samsung), Size: 64MBytes, VPP: 9V
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.9.50.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: B7C328EE8272854C050D06B96F4D27E116711C0C
Flashbus Write baud set to 5.0Mbits
Started group flash erase
EraseArea[0,CMT]: 0x01540000-0x01BBFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 1.515s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 39.578s
Flashing Speed: 1271,45 kBit/S
Restarting MCU...
Processing rm397__09.45.ppm_r (APE)...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
Factory defaults OK
Reading info...
MCU Version V 04.92
MCU Date 14-12-07
Product RM-397
Manufacturer (c) Nokia
IMEI 359848010936226
Mastercode 341220754
IMEI Spare 3A95480801392602
IMEI SV 3395480801392622F4000000
PPM V 09.45, 20-11-08, RM-397, (c) Nokia , R
CNT Content: r_black, V 04.92, 14-12-07, RM-397, (c) Nokia ,
PSN M7H213492
Product Code 0548844
Module Code 0203353
Basic Product Code 0514863
PSD 0000000000000000
LPSN 0
RETU 15
TAHVO 22
AHNE 30
HW 1001
RFIC 17141715
DSP ICPR71_07w43
LCD SEIKO
BT 06cc-P9.2
Simlock Server SIMLOCK SERVER
Simlock Key 2440700000000000
Simlock Profile 8000000000000006
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [1,2] State: OPENED Type: GID Data: FFFF
Simlock [1,3] State: OPENED Type: GID Data: FFFF
Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [2,2] State: OPENED Type: GID Data: FFFF
Simlock [2,3] State: OPENED Type: GID Data: FFFF
Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [3,2] State: OPENED Type: GID Data: FFFF
Simlock [3,3] State: OPENED Type: GID Data: FFFF
Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [4,2] State: OPENED Type: GID Data: FFFF
Simlock [4,3] State: OPENED Type: GID Data: FFFF
Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [5,2] State: OPENED Type: GID Data: FFFF
Simlock [5,3] State: OPENED Type: GID Data: FFFF
Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [6,2] State: OPENED Type: GID Data: FFFF
Simlock [6,3] State: OPENED Type: GID Data: FFFF
Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [7,2] State: OPENED Type: GID Data: FFFF
Simlock [7,3] State: OPENED Type: GID Data: FFFF
Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!
Имхо: обсуждение русификации данного ТА не в этой теме должно быть.
Последние файлы
