Re: SE K810 моргалик...
#5
vth, лог снимался после прошивки.
текущий лог:
Код:
яю
FSFLASH: CPU is ARM 926, revision 3, architecture 6
FSFLASH: Inst Cache size is 32.00 Kb, 4-way, 32 bytes/line.
FSFLASH: Data Cache size is 16.00 Kb, 4-way, 32 bytes/line.
FSFLASH: NOR (Sibley) Flash device @ [0x44000000-0x47FFFFFF] 65536 Kb
FSFLASH: Vendor (0x89): Intel
FSFLASH: Device: ?????? (0x887E)
FSFLASH: Unique Device Number: 0x0C96E86ECCE40558
FSFLASH: Page size: -
FSFLASH: Write Buffer Size: 1024 bytes
FSFLASH: Burst Mode: ON
FSFLASH: Erase region [0x44000000-0x47FFFFFF] has an erase block size of 256 Kb
FSFLASH: NAND Flash device @ [0x24000000-0x27FFFFFF] 65536 Kb
FSFLASH: Vendor (0x20): ST
FSFLASH: Device: K9K1208Q0C or K9F1208R0B (0x0036)
FSFLASH: Unique Device Number: -
FSFLASH: Page size: 512 bytes
FSFLASH: Write Buffer Size: 0 bytes
FSFLASH: Burst Mode: OFF
FSFLASH: Copy back: ON
FSFLASH: Cache read: OFF
FSFLASH: NAND controller rev: 1.1
MALL: **** NEW MAXIMUM HEAP 1 USAGE: 1056 bytes requested in total ****
FSFLASH: Mounting logical flash device 0
FSFLASH: Flash segment 0:0 located @ [0x45E00000,0x47DFFFFF] (32768 Kb)
FSFLASH: Flash type: NOR
FSFLASH: Block size: 4096
FSFLASH: Logical erase size: 256 Kb
FSFLASH: Flash segment 0:1 located @ [0x24000000,0x27FFFFFF] (65536 Kb)
FSFLASH: Flash type: NAND
FSFLASH: Block size: 4096
FSFLASH: Logical erase size: 256 Kb
MALL: **** NEW MAXIMUM HEAP 1 USAGE: 3136 bytes requested in total ****
MALL: **** NEW MAXIMUM HEAP 1 USAGE: 7264 bytes requested in total ****
MALL: **** NEW MAXIMUM HEAP 1 USAGE: 7744 bytes requested in total ****
MALL: **** NEW MAXIMUM HEAP 1 USAGE: 11872 bytes requested in total ****
MALL: **** NEW MAXIMUM HEAP 1 USAGE: 16000 bytes requested in total ****
MALL: **** NEW MAXIMUM HEAP 1 USAGE: 86944 bytes requested in total ****
FSFLASH: Write processes started, pid = 0x10031.
FSFLASH: Erase processes started, pid = 0x10032.
FSFLASH: Check
FSFLASH: Stage 1
FSFLASH: Stage 2
FSFLASH: Stage 3
MALL: **** NEW MAXIMUM HEAP 1 USAGE: 220864 bytes requested in total ****
FSFLASH: Re-allocated block LUT from 23637 to 44626 logical blocks
FSFLASH: Stage 4
FSFLASH: Config block located @ 0x45E00000
FSFLASH: Mount block located @ 0x249C0000
FSFLASH: CLEAN blocks 18236
FSFLASH: MIN CLEAN blocks 128
FSFLASH: BAD blocks 0
FSFLASH: State 5 skipped
FSFLASH: Stage 6.1
FSFLASH: Stage 6.2 skipped
FSFLASH: Stage 7
FSFLASH: Stage 8
FSFLASH: Check done
FSFLASH: TOTAL number of blocks: 24576
FSFLASH: AVAILABLE blocks: 23637
FSFLASH: MAX logical block nbr: 44625
FSFLASH: COMMITTED blocks: 3772
FSFLASH: FREE blocks: 19865
FSFLASH: DIRTY blocks: 2542 (0 BAD)
FSFLASH: CLEAN blocks: 18235 (4352 NOR)
FSFLASH: HEADER blocks: 27
MALL: **** NEW MAXIMUM HEAP 1 USAGE: 236064 bytes requested in total ****
FS: Mounting FAT file system partition / for read/write
FS: SecPerClus = 8
FS: BytesPerSec = 512
FS: RootEntCnt = 512
FS: NumFATs = 1
FS: RsvdSecCnt = 1
FS: Type: FAT16
FS: AtFSX: 11.13
FS: Block size: 4096
FS: Read size: 512
FS: FAT mirroring: OFF
FS: Sector locations
FS: Size: 175777 (0x2AEA1)
FS: PBR: 7 (0x7)
FS: FAT start: 8 (0x8)
FS: Active FAT start: 8 (0x8)
FS: Root start: 96 (0x60)
FS: Clusters: 21957 (0x55C5)
FS: Cluster start: 128 (0x80)
FS: Cluster last: 175783 (0x2AEA7)
FS: Partition not closed
FS: Phone not properly shut down, running FSCK on partition /
FS: FSCK level is 1
FSCK: Directory Check
MALL: **** NEW MAXIMUM HEAP 1 USAGE: 250304 bytes requested in total ****
MALL: **** NEW MAXIMUM HEAP 1 USAGE: 264320 bytes requested in total ****
FS: Partition / set to clean
FSCK: Done
FS: File System Size: 21957 (87828 Kb)
FS: Free Logical Blocks: 18594 (74376 Kb)
FS: Free Physical Blocks: 19864 (79456 Kb)
FS: Used Blocks: 3363 (13452 Kb)
FS: Partition / mounted
FS: Partition / set to dirty
FS: Mounting FAT file system partition /tpa/settings/ui/bgim/cache for read/write
FS: SecPerClus = 8
FS: BytesPerSec = 512
FS: RootEntCnt = 512
FS: NumFATs = 1
FS: RsvdSecCnt = 1
FS: Type: FAT12
FS: AtFSX: 11.13
FS: Block size: 4096
FS: Read size: 512
FS: FAT mirroring: OFF
FS: Sector locations
FS: Size: 3993 (0xF99)
FS: PBR: 7 (0x7)
FS: FAT start: 8 (0x8)
FS: Active FAT start: 8 (0x8)
FS: Root start: 16 (0x10)
FS: Clusters: 494 (0x1EE)
FS: Cluster start: 48 (0x30)
FS: Cluster last: 3999 (0xF9F)
FS: File System Size: 494 (1976 Kb)
FS: Free Logical Blocks: 494 (1976 Kb)
FS: Free Physical Blocks: 19865 (79460 Kb)
FS: Used Blocks: 0 (0 Kb)
FS: Partition /tpa/settings/ui/bgim/cache mounted
FS: Mounting FAT file system partition /ifs for read/write
FS: SecPerClus = 8
FS: BytesPerSec = 512
FS: RootEntCnt = 512
FS: NumFATs = 1
FS: RsvdSecCnt = 1
FS: Type: FAT12
FS: AtFSX: 11.13
FS: Block size: 4096
FS: Read size: 512
FS: FAT mirroring: OFF
FS: Sector locations
FS: Size: 3593 (0xE09)
FS: PBR: 7 (0x7)
FS: FAT start: 8 (0x8)
FS: Active FAT start: 8 (0x8)
FS: Root start: 16 (0x10)
FS: Clusters: 444 (0x1BC)
FS: Cluster start: 48 (0x30)
FS: Cluster last: 3599 (0xE0F)
FS: Partition not closed
FS: Phone not properly shut down, running FSCK on partition /ifs
FS: FSCK level is 1
FSCK: Directory Check
FS: Partition /ifs set to clean
FSCK: Done
FS: File System Size: 444 (1776 Kb)
FS: Free Logical Blocks: 256 (1024 Kb)
FS: Free Physical Blocks: 19865 (79460 Kb)
FS: Used Blocks: 188 (752 Kb)
FS: Partition /ifs mounted
MALL: **** NEW MAXIMUM HEAP 1 USAGE: 282112 bytes requested in total ****
FS: Mounting FAT file system partition /system for read/write
FS: SecPerClus = 8
FS: BytesPerSec = 512
FS: RootEntCnt = 512
FS: NumFATs = 1
FS: RsvdSecCnt = 1
FS: Type: FAT12
FS: AtFSX: 11.13
FS: Block size: 4096
FS: Read size: 512
FS: FAT mirroring: OFF
FS: Sector locations
FS: Size: 5593 (0x15D9)
FS: PBR: 7 (0x7)
FS: FAT start: 8 (0x8)
FS: Active FAT start: 8 (0x8)
FS: Root start: 16 (0x10)
FS: Clusters: 694 (0x2B6)
FS: Cluster start: 48 (0x30)
FS: Cluster last: 5599 (0x15DF)
FS: File System Size: 694 (2776 Kb)
FS: Free Logical Blocks: 543 (2172 Kb)
FS: Free Physical Blocks: 19865 (79460 Kb)
FS: Used Blocks: 151 (604 Kb)
FS: Partition /system mounted
MALL: **** NEW MAXIMUM HEAP 1 USAGE: 296672 bytes requested in total ****
FS: Mounting FAT file system partition /usb for read/write
FS: SecPerClus = 8
FS: BytesPerSec = 512
FS: RootEntCnt = 512
FS: NumFATs = 1
FS: RsvdSecCnt = 1
FS: Type: FAT16
FS: AtFSX: 11.13
FS: Block size: 4096
FS: Read size: 512
FS: FAT mirroring: OFF
FS: Sector locations
FS: Size: 167993 (0x29039)
FS: PBR: 7 (0x7)
FS: FAT start: 8 (0x8)
FS: Active FAT start: 8 (0x8)
FS: Root start: 96 (0x60)
FS: Clusters: 20984 (0x51F8)
FS: Cluster start: 128 (0x80)
FS: Cluster last: 167999 (0x2903F)
FS: Partition not closed
FS: Phone not properly shut down, running FSCK on partition /usb
FS: FSCK level is 1
FSCK: Directory Check
MALL: **** NEW MAXIMUM HEAP 1 USAGE: 312704 bytes requested in total ****
FS: Partition /usb set to clean
FSCK: Done
FS: File System Size: 20984 (83936 Kb)
FS: Free Logical Blocks: 20966 (83864 Kb)
FS: Free Physical Blocks: 19865 (79460 Kb)
FS: Used Blocks: 18 (72 Kb)
FS: Partition /usb mounted
MALL: **** NEW MAXIMUM HEAP 0 USAGE: 96 bytes requested in total ****
BuildInfo: Label: <CRH109338_14_R19A003> Variant: <cxc1329257_U250_PT_PHONE>
BuildInfo: Generated: 2007-11-20 20:51 by Off.Bld
Product : <Sony Ericsson K810> Version: 0000
HW Setup : Marika P2A (Id:0x9900) IRDA: B0A1 BT: C0A1 RS232: Error
Vendor : <Sony Ericsson> PNP: SER USB: 0FCE BT: 0000
OS: core startup complete!
OS: Starting TimerProcess
OS: Vector 13 Pri 0 do not use DDA
OS: Vector 24 Pri 1 do not use DDA
OS: Vector 23 Pri 2 do not use DDA
OS: Vector 22 Pri 3 do not use DDA
OS: Vector 18 Pri 4 do not use DDA
OS: Vector 7 Pri 11 do not use DDA
OS: Vector 6 Pri 5 do not use DDA
OS: Vector 2 Pri 6 do not use DDA
OS: Vector 4 Pri 0 do not use DDA
OS: Vector 27 Pri 7 do not use DDA
OS: Vector 1 Pri 8 do not use DDA
OS: Vector 0 Pri 9 do not use DDA
OS: Vector 32 Pri 21 do not use DDA
OS: Vector 33 Pri 21 do not use DDA
OS: Vector 14 Pri 14 do not use DDA
OS: Vector 60 Pri 30 do not use DDA
OS: Vector 70 Pri 30 do not use DDA
OS: Vector 71 Pri 30 do not use DDA
OS: Vector 9 Pri 10 do not use DDA
OS: Vector 17 Pri 10 do not use DDA
OS: Vector 37 Pri 17 do not use DDA
WHAM_HW_ControlProcess is running
MPH: PID 65639
RLC_DL: S I
RR: PID 65641
RR: RR_MM_PRIM 469955328
RR: MM_RR_PRIM 469955968
RR: MPH_RR_PRIM 469956608
RR: RR_MPH_PRIM 469961088
RR: DL_RR_PRIM 469964288
RR: RR_DL_PRIM 469964928
RR: RR_MMM_PRIM 469968768
RR: MMM_RR_PRIM 469969408
RR: RR_RLC_PRIM 469970688
RR: RLC_RR_PRIM 469971328
RR: PH_MPH_PRIM 470181248
RR: MPH_PH_PRIM 470186688
RR: MPH_CB_PRIM 469973568
RR: CB_MPH_PRIM 469974208
RR: MPH_MMM_PRIM 469976128
RR: MMM_MPH_PRIM 469976768
RR: PH_RLC_PRIM 470194688
RR: RLC_PH_PRIM 470197888
RR: RLC_LLC_PRIM 469981888
RR: LLC_RLC_PRIM 469982528
RR: RR_LLC_PRIM 469985088
RR: LLC_RR_PRIM 469985728
RR: PH_RR_PRIM 470200448
RR: RR_PH_PRIM 470201088
RR: GAS_WAS_PRIM 470175488
RR: WAS_GAS_PRIM 470172928
RR: RR_TIMER_PRIM 469996928
RR: SIGID_INTERVAL_START_V2_UNIQUE_TEST_ON_RR_TIMER_PRIM 469996927
RR: SIGID_INTERVAL_END_V2_UNIQUE_TEST_ON_RR_TIMER_PRIM 469996949
RR: TEST_RR_TIMER_PRIM 1
RR: MPH_TIMER_PRIM 469995008
RR: T3206_VALUE: 800 ms
RR: T3208_VALUE: 960 ms
RR: T3210_VALUE: 300 ms
RLC: RLC_LLC
RLC: RLC_IDLE_REQ = 469981888
RLC: RLC_GMM_DATA_REQ = 469981889
RLC: RLC_DATA_REQ = 469981890
RLC: RLC_UNITDATA_REQ = 469981891
RLC: RLC_RLC_DATA_REQ = 469981893
RLC: RLC_RLC_UNITDATA_REQ = 469981894
RLC: RLC_DATA_RSP = 469981897
RLC: LLC_RLC
RLC: RLC_DATA_CNF = 469982528
RLC: RLC_DATA_IND = 469982529
RLC: RLC_STATUS_IND = 469982530
RLC: RR_RLC
RLC: RR_TBF_ESTABLISH_REQ = 469970688
RLC: RR_UPLINK_TBF_RELEASE_REQ = 469970690
RLC: RR_DOWNLINK_TBF_RELEASE_REQ = 469970691
RLC: RR_TBF_RELEASE_RSP = 469970692
RLC: RR_DOWNLINK_ACK_NACK_REQ = 469970693
RLC: RLC_RR
RLC: RR_TBF_ESTABLISH_CNF = 469971328
RLC: RR_UPLINK_TBF_RELEASE_CNF = 469971330
RLC: RR_DOWNLINK_TBF_RELEASE_CNF = 469971331
RLC: RR_TBF_ESTABLISH_IND = 469971329
RLC: RR_TBF_RELEASE_IND = 469971332
RLC: RR_UPLINK_ACK_NACK_IND = 469971333
RLC: PH_RLC
RLC: PH_RLC_DATA_REQ = 470194688
RLC: PH_RLC_DATA_RELEASE_REQ = 470194690
RLC: PH_RLC_CONTROL_REQ = 470194691
RLC: PH_RLC_CONTROL_CONTROL_0_PDCH_REQ = 470194693
RLC: PH_RLC_CONTROL_CONTROL_1_PDCH_REQ = 470194694
RLC: PH_RLC_CONTROL_CONTROL_2_PDCH_REQ = 470194695
RLC: PH_RLC_CONTROL_CONTROL_3_PDCH_REQ = 470194696
RLC: PH_RLC_CONTROL_CONTROL_4_PDCH_REQ = 470194697
RLC: PH_RLC_CONTROL_CONTROL_5_PDCH_REQ = 470194698
RLC: PH_RLC_CONTROL_DATA_0_PDCH_REQ = 470194699
RLC: PH_RLC_CONTROL_DATA_1_PDCH_REQ = 470194700
RLC: PH_RLC_CONTROL_DATA_2_PDCH_REQ = 470194701
RLC: PH_RLC_CONTROL_DATA_3_PDCH_REQ = 470194702
RLC: PH_RLC_CONTROL_DATA_4_PDCH_REQ = 470194703
RLC: PH_RLC_CONTROL_DATA_5_PDCH_REQ = 470194704
RLC: PH_RLC_CONTROL_CONTROL_0_PDTCH_PDCH_REQ = 470194705
RLC: PH_RLC_CONTROL_CONTROL_1_PDTCH_PDCH_REQ = 470194706
RLC: PH_RLC_CONTROL_CONTROL_2_PDTCH_PDCH_REQ = 470194707
RLC: PH_RLC_CONTROL_CONTROL_3_PDTCH_PDCH_REQ = 470194708
RLC: PH_RLC_CONTROL_CONTROL_4_PDTCH_PDCH_REQ = 470194709
RLC: PH_RLC_CONTROL_CONTROL_5_PDTCH_PDCH_REQ = 470194710
RLC: PH_RLC_CONTROL_DATA_0_PDTCH_PDCH_REQ = 470194711
RLC: PH_RLC_CONTROL_DATA_1_PDTCH_PDCH_REQ = 470194712
RLC: PH_RLC_CONTROL_DATA_2_PDTCH_PDCH_REQ = 470194713
RLC: PH_RLC_CONTROL_DATA_3_PDTCH_PDCH_REQ = 470194714
RLC: PH_RLC_CONTROL_DATA_4_PDTCH_PDCH_REQ = 470194715
RLC: PH_RLC_CONTROL_DATA_5_PDTCH_PDCH_REQ = 470194716
RLC: PH_RLC_RELEASE_REQ = 470194717
RLC: RLC_PH
RLC: PH_RLC_DATA_CNF = 470197888
RLC: PH_RLC_DATA_IND = 470197889
RLC: PH_RLC_DATA_RTS_IND = 470197890
RLC: PH_RLC_DATA_RELEASE_CNF = 470197891
RLC: PH_RLC_CONNECT_IND = 470197892
RLC: PH_RLC_CONTROL_CNF = 470197893
RLC: PH_RLC_CONTROL_IND = 470197894
RLC: PH_RLC_RELEASE_CNF = 470197895
RLC: RLC_TIMER
RLC: RLC_TIMER_T3164 = 469987008
RLC: RLC_TIMER_T3166 = 469987009
RLC: RLC_TIMER_T3180 = 469987010
RLC: RLC_TIMER_T3182 = 469987011
RLC: RLC_TIMER_T3190 = 469987012
RLC: RLC_TIMER_T3192 = 469987015
RLC_UL: S I
MPH_Low: PID 65644
LLC 11: state 0
LLC 9: state 0
LLC 7: state 0
LLC 5: state 0
LLC 3: state 0
LLC: PID 65645
LLC: <SMS 469772354
LLC: >SMS 469772996
LLC: <SNDCP 469978688 469978696
LLC 1: state 0
Prototype start process started!
MALL: **** NEW MAXIMUM HEAP 0 USAGE: 896 bytes requested in total ****
SetIpc_Receiver PHY_Master called by Pid=65685
RLink: RLINK_PH
RLink: PH_RLINK_CONNECT_IND = 470178690
RLink: PH_RLINK_DISCONNECT_IND = 470178691
RLink: PH_RLINK_RTS_IND = 470178688
RLink: PH_RLINK_DATA_IND = 470178689
RLC: PH_RLINK
RLink: PH_RLINK_DATA_REQ = 4701780
Rational Rose RealTime C Target Run Time SystemRelease 6.5.1233.0
Copyright (c) 1993-2005 Rational Software
EILD_HCITL.c: 613 EILD_HCITL_SetTXPin: PinLevel = 0
IRPHY[SetPolarity] Mode=0
IRPHY[SetSignalPolarity] InvertRx: 1
48
RLink: RLINK_RLP
RLink: RLINK_RLP_RTS_IND = 469849344
RLink: RLINK_RLP_DATA_IND = 469849346
RLC: RLP_RLINK
RLink: RLINK_RLP_DATA_REQ = 469849347
RLink: RLINK_RLP_DTX_REQ = 469849348
RLC: RLINK_RR
RLC: RR_CHANNEL_MODE_INFO_IND = 314576640
RLC: RR_CHANNEL_MODE_MODIFY_IND = 314576641
RLink: State Idle
SM: Initiated; ProcessID = 65680 !
NS versions:
RRC_SysInfoServer:CNH1010238_SYSINFO_SIB16_R9_PHY_INTERFACE flag set
RRC_CellEval: Initialised
RRC_CellEval: State Inactive
RRC CellSel: STATE DEACTIVATED ***
RRC_MeasCtrl: Deactivated.
TASK: Init transition in MobilityCtrl cap
TASK: NO SERVING CELL in MobilityCtrl capsule
CAS Proxy: Process Id = 65683
MM: reset TMSI
MM: No valid GSM keys
MM: No valid WCDMA keys
MM: state 0
SEMC_ACB: Proce
EILD_LLRS232_Init. Original GPIO routing:
RX : No
TX : No
CTS: No, Index=0
RTS: No, Index=0
### Print Server: Requesting DebugMux channel...
s
973 ### Print Server: Started OK
CA
973 MALL: **** NEW MAXIMUM HEAP 0 USAGE: 960 bytes requested in total ****s started, pid 0x100ef.
973 SEMC_ACB: Version = ACBM V3.13, debuglevel = 0x1131 [GLD] GRAM Bank 1 (noncached): 20400000 - 20800000
974 [GLD] GRAM Bank 2: 20800000 - 20C00000
974 [GLD] GRAM Bank 3: 20C00000 - 21000000
974 [GLD] g_rgdwMemoryXRAM = (20E80000 - 20FFFFFF)
974 MALL: **** NEW MAXIMUM HEAP 0 USAGE: 4992 bytes requested in total ****
974 MALL: **** NEW MAXIMUM HEAP 0 USAGE: 9216 bytes requested in total ****
974 MALL: **** NEW MAXIMUM HEAP 0 USAGE: 13440 bytes requested in total ****
974 MALL: **** NEW MAXIMUM HEAP 0 USAGE: 68992 bytes requested in total ****
974 MALL: **** NEW MAXIMUM HEAP 0 USAGE: 73120 bytes requested in total ****
974 MALL: **** NEW MAXIMUM HEAP 0 USAGE: 82368 bytes requested in total ****GMM: ResetSIM_Data
974 GMM: No valid GSM-GPRS keys
974 GMM: No valid WCDMA keysDRM: DRM_Process started
974 DRM: DRM_ConfigFlags ----------------------- (start):
974 DRM: DRM_ConfigFlags: CFG_ENABLE_OMA_DRM_SUPPORT: ---
974 DRM: DRM_ConfigFlags: CFG_ENABLE_OMA2_DRM_SUPPORT: ---
974 DRM: DRM_ConfigFlags: CFG_ENABLE_PLUGIN_DRM_SUPPORT: defined
974 DRM: DRM_ConfigFlags: CFG_ENABLE_DVBH_DRM_SUPPORT: ---
974 DRM: DRM_ConfigFlags: CFG_ENABLE_WMD_DRM_SUPPORT: ---
974 DRM: DRM_ConfigFlags: CFG_ENABLE_EDC: ---
974 DRM: DRM_ConfigFlags: WIN32: ---
974 DRM: DRM_ConfigFlags: DRM_SECURITY_USE_SW: ---
974 DRM: DRM_ConfigFlags: CFG_DRM_FAKE_CONTROL: defined
974 DRM: DRM_ConfigFlags: CNH1600098_DRM_IDBG: ---
974 DRM: DRM_ConfigFlags ----------------------- (end)
974 * CC1 state 0
975 * CC2 state 0
975 * CC3 state 0
975 * CC4 state 0
975 * CC5 state 0
975 * CC6 state 0
975 * CC7 state 0
975 CCS: IdleSS: State Idle @CallMeter startedSMC_MO_1 (65672) state 4
975 SMC_MO_2 (65673) state 4
975 SMC_MT (65674) state 4
975 SMR_MO state 3
975 SMR_MT state 3
975 SetIpc_Receiver PHY_LogPointServer called by Pid=65686[ICC-LD] ICC_Reader_0_Process Started
975 [ICC-LD] Status Changed: ICC_READER_DEACTIVATED, Reader: 0[SIM] State Changed: SIM_STATE_NULL, Appl: 0, Ref: 0SM[H324]: Turning on H324 state trace
975 CSM[CCL]: Turning off CCL state trace
975 CSM[H245]: Turning on H245 MSD state trace
975 CSM[H245]: Turning on H245 CE state trace
975 CSM[H245]: Turning on H245 MT state trace
975 CSM[H245]: Turning off H245 MT IF state trace
975 CSM[H245]: Turning off H245 RME state trace
975 CSM[H245]: Turning on H245 LC state trace
975 CSM[H245]: Turning off H245 LC Manager state trace
975 CSM[H245]: Turning off H245 CLC state trace
975 CSM[H245]: Turning off H245 RTD state trace
975 CSM[H245]: Turning off H245 MR state trace
975 M: MODULE_INIT
975 [GVI] GVI_CallQueue_PrepareCall called before GVI is ready, retry...GDFS_SRV State 1-Closed
978 GDFS: Format version 1
979 GDFS Log[0] <- Phys[0] 74242 bytes left. Erased 1 times
981 GDFS Log[1] <- Phys[1] 126510 bytes left. Erased 1 times
983 GDFS Log[2] <- Phys[2] 82204 bytes left. Erased 1 times
985 GDFS Log[3] <- Phys[3] 106859 bytes left. Erased 1 times
986 GDFS Log[4] <- Phys[4] 114088 bytes left. Erased 1 times
986 GDFS Log[5] <- Phys[5] 110716 bytes left. Erased 1 times
987 GDFS Log[6] <- Phys[6] 131060 bytes left. Erased 1 times
988 GDFS_SRV State 2-Opening
988 MPH: GSM Search Intervals 10 20 80 10 25 - 40 0 0 0 0
988 RH: Activate on LRRAT: W
988 RH state: Inactive
988 LLC 1: Unexpected signal #469983810
988 CAS Proxy: <From CAS> RRC_TMSI_REMOVE_REQ
988 CAS Proxy: <From CAS> RRC_DELETE_KEYS_REQ
988 CAS Proxy: <From CAS> RRC_DELETE_KEYS_REQ
988 CC: speech ver config 4 2 0 5 1 BT Dispatch signal base: 90180096 (0x5600a00)
988 BT Request signal base: 15850 (0x3dea)
988 BT Response signal base: 16005 (0x3e85)
988 BT Module Internal base: 678 (0x2a6)
988 BT_UART_ON_TIMER: 685 (0x2ad)
988 EVENT_BT_EBT_STACK: 710 (0x2c6)
988 BT Signal Interval end: 982 (0x3d6)
988 BT_Ctrl_ process Id = 0x100b5
988 EBT_StackProcess_ process Id = 0x100b6
988 EILD_HCITL_Driver_Process_ process Id = 0x100c3
988 BT/EBT_sil.c: 380 SIL_OpenConnection: COM1:baud=115200 parity=N data=8 stop=1
989 RR state 0
989 CC: TTY mode = 0
989 * CC0 state 0
989 MPH: PacketChannels activated
989 MPH: GDFS 0 read MCC 363
989 MPH: GDFS 1 read MCC 722
990 MPH: GDFS 3 read MCC 362
990 HW_FG: Dis Bl
990 MS_TYPE = MS_EGSM900_DCS1800_PCS1900
990 MPH:SelectedModeIndex=1
990 MPH_GD_Info.SensitivityLimit_dBm[BAND_GSM900_OR_EGSM900] = -107
990 MPH_GD_Info.SensitivityLimit_dBm[BAND_DCS1800] = -107
990 MPH_GD_Info.SensitivityLimit_dBm[BAND_PCS1900] = -107
990 MPH_GD_Info.SensitivityLimit_dBm[BAND_GSM850] = -107
990 MPH_GD_Info.MinNrOfIdentifiedCellsToSkipWeakCells = 0
990 MPH: EGSM900_DCS1800
990 MPH NullState
990 ENH_Control_Reset: IsPkt 0 IsARFCNsInit 0
990 ENH_Control_Reset: IsPkt 1 IsARFCNsInit 0
990 ENH_NCParameters_Reset GSM
990 ENH_NCParameters_Reset GPRS
990 ENH_NCParameters_Reset GSM
990 ENH_NCParameters_Reset GPRS
990 TCH_FACCH_BASED_AFC on
991 RTS INFO: Did NOT find the signal in the registered database. Sending process: IDBGSRV_Process(65715) Signal no: 20887 Receiving process:UMTS_L2_PT (65682)EILD_HCITL.c: 613 EILD_HCITL_SetTXPin: PinLevel = 1
991 EILD_HCITL.c: 867 SetBaudRate: = 115200, Stopbits = 1
991 LLRS232/LLDEBUG : Unexpected signal 5197 from pid 100b3
991 HW_FG: Dis Bl
991 HW_FG: Dis Bl
991 XX: Active MS operation mode: MS_MODE_CS_AND_PS
992 GMM<-GMM_EXTREGISTRATIONINFO_SET_REQACM: Starting Application Side.
992 SL: SearchingMode = 1
992 SL: RGD GSM_MultislotClass=2
992 SL: RGD GPRS_MultislotClass=10
992 SL: RGD DTM_GPRS_multislotClass=2
993 ns_util: MS Features:000bb913
993 ns_util: CFG_ENABLE_WCDMA_CALL_SUPPORT
993 ns_util: CFG_ENABLE_GSM_GPRS_CALL_SUPPORT
993 PHY_MasterProcess: Temperature subscription success.
993 SL: RAT_Mode = GSM single mode
993 SL: SIGID_INTERVAL_START_MOD_NS_CAS = 469762048
993 SL: ProcessID = 10082
993 SL: CFG_DISABLE_SECURITY_HANDLING is NOT! defined
993 SL: DUAL_RAT_SUPPORT IS! defined
993 SL: NS_CFG_ENABLE_T314_T315_FULL_SUPPORT is NOT! defined
993 SL: NS_CFG_ENABLE_FLUSH_USER_DATA_BUFFERS is NOT defined
993 SL state 0
993 SL<-EVENT_SIM_STATE_CHANGED in State 0 from 100d2
993 SL: Not active
993 SL new SIM handle=0[sysctrl] ON-button pressed
993 [sysctrl] Enabling UICC refresh task.
993 [SIM_FILE_UTIL] FCP Cache Size 80
993 SL<-R_REQ_NSAD_SERVICEMODE_GET in State 0 from 1005c
993 SL: Not active
993 BMC: BMC_Deactivated = 1
993 SetIpc_Receiver MAC called by Pid=65680
993 SetIpc_Receiver RRC called by Pid=65680
993 RRC_MeasCtrl: EcN0 RxLevReportingArray:1 10 15 21 26 92 0 0 0 255
994 RRC_MeasCtrl: RSCP RxLevReportingArray:1 10 15 21 26 92 0 0 0 255
994 TASK: Received RRC_TMSI_REMOVE_REQ from CAS.
994 TASK: Received RRC_DELETE_KEYS_REQ from CAS.
994 TASK: Received RRC_DELETE_KEYS_REQ from CAS.
994 ETX OK
994 ETX OK
995 MMM IMEI = 353153-02-151354-0, IMEI_SVN=69
995 DebugMux[IMEI] Length=8, TypeOfID=2, OddEven=1, Digits: 3 5 3 1 5 3 0 2 1 5 1 3 5 4 4
996 MMM EqPLMN List read from GDFS, nbr=1, 284 5
1017
### WARNING! PRINT SERVER OVERFLOW, 25 PRINTOUT(S) LOST! ###
1019 AT/CFS/PrintToTraceLog_AT_CmdList: Forwarding to app layer (e.g. AAS); Commands/identifiers listed in 'at_cmds.dat':
1019 AT/CFS, FwdCmd: '*'
1019 AT/CFS, FwdCmd: 'VOICE_CMDS'
1019 AT/CFS, FwdCmd: 'Z'
1019 AT/CFS, FwdCmd: '&F'
1019 AT/CFS, FwdCmd: '*EAID'
1019 AT/CFS, FwdCmd: '*EALR'
1019 AT/CFS, FwdCmd: '*EALS'
1019 AT/CFS, FwdCmd: '*EAM'
1019 AT/CFS, FwdCmd: '*EAMS'
1032
### WARNING! PRINT SERVER OVERFLOW, 221 PRINTOUT(S) LOST! ###
1032 ###Downloading DSP for first time after startup of phone!###
1068 ## DSP VersionIdentity: "CRH109469_R10U MIDI_PCM_ASR --- ECSRINI_R10_DSP_export Fri Mar 9 10:58:13 2007"
1068 AUC INFO: Starting PostBoot. Takes a while in MoseS (5 sek)
1070 [GVI] DisplayDriver Installed:Wilma LCD QVGA by Hitachi driver: R63400A1 Ver:200711221 WxH=240x320
1073 MALL: **** NEW MAXIMUM HEAP 0 USAGE: 228576 bytes requested in total ****
1074 MALL: **** NEW MAXIMUM HEAP 0 USAGE: 491456 bytes requested in total ****
1076 [GVI] Server Ready, started in 0.563878 s
1076 [GVI] EC: 3 (ILLEGAL_OBJECT) 00000000, pid:0x100A9 (GraphicsServer_Process) cid:9 (CreateDeviceGC)
1214 DRM: Init OK
1214 DRM: DRM_GetAgentTypeRelatedToFileExtension(/tpa/preset/system/settings/splash, 0) Couldn't extract FileExtension
1215 DRM_PRS: DRM_PRS_Process started
1237 HW_FG: En Bl
1237 SPBC Process startedBT/EBT_sil.c: 399 SIL_OpenConnection: Start event OK!
1301 MALL: **** NEW MAXIMUM HEAP 1 USAGE: 329280 bytes requested in total ****
1301 FS: Partition /usb set to dirty
1302 FSX: Unable to create mem stick directory structure - continuing anyway!
1302 MALL: **** NEW MAXIMUM HEAP 1 USAGE: 346528 bytes requested in total ****GDFS_Wrapper: **** Up and running ****
1237 SPBC <- SIM STATE 0
1309 CBS: cbs_main.c: EVENT_SIM_STATE_CHANGED accepted
1309 CBS: cbs_main.c: CBS_Manager_SAT_DataDownload_Activate: SIM STATE 0, process 0
1310 CBS: cb_main.c: CBS_Manager_SAT_DataDownload_Activate: SIM STATE 0 NOT HANDLEDMMPROT[SIP]: SIP started
1322 MMPROT[RTSP]: RTSP Process Started
1329 GDFS_WR State 1-Closed
1329 GDFS_WR Start check
1335 BATT: Battery type is TYPE 1
1336 BATT: Compensated VBAT (3865 mV) based remaining capacity is 59.5%BT/BT.c: BT_RECEIVE_W_TMO: Timeout after 500 ms
1367 EILD_HCITL.c: 1729 UART ClockRequest: ON
1367 BT/EBT_sil.c: [Tx] HCI_Reset:
1367 EILD_HCITL.c: 1847 PowerManagement: Wake-up from sleep mode:
1369 EILD_HCITL.c: 1460 R_Do_Send:
1369 201C7108 .... 01 03 0C 00
1383 GDFS Free Blk 7 Ok
1383 GDFS_WR Check done
1383 GDFS_SRV State 3-Open
1384 GDFS_WR State 2-OpenEILD_HCITL.c: 1558 Done_Receive:
1391 201B56CA ....... 04 0E 04 02 03 0C 00
1391 BT/EBT_sil.c: [Rx] HCI_Command_Complete_Event:
1391 BT/BT.c: 6345 HCI_CONFIGURE_PORT_CNF:
1391 BT/BT.c: 6334 HCI_START_CNF:
1396 GDFS_Wrapper: GDFSW_RestoreFromFile called.
1452 GDFS_SRV Queue full
1592 [ICC-PD] WARNING - Character Timeout waiting for receive
1592 [ICC-PD] Fi: 1 Di: 1
1598 [ICC-PD] WARNING - Character Timeout waiting for receive
1610 GDFS_SRV Queue emptyThe CheckIfMoreResets procedure has been activated.
1610 State = 30, NrOfTriesOfReset = 2.
1622 [SIM] *** ERROR *** No Card Present
1622 [SIM] InitialiseCard SIM_APPLICATION_UNKNOWN
1622 [SIM] WARNING - Destruction of Application Parameters
1622 [SIM_FILE_UTIL] Used Cache Records 0
1622 [SIM_FILE_UTIL] Max Cache Records 80
1622 [SIM] WARNING - Destruction of Card Parameters
1622 [SIM] State Changed: SIM_STATE_POWER_OFF, Appl: 0, Ref: 0[lockctrl] SimLock : NOT OK, PhoneLock : NOT OK, Sim Active : NOT ACTIVE
1622 SL<-EVENT_SIM_STATE_CHANGED in State 0 from 100d2
1622 SL: Not active
1622 SL new SIM handle=0
1622 PAS: Either shutdown is ordered or an unknown signal 216018368 is receivedAT/ AT-3; Received Sig:'EVENT_SIM_STATE_CHANGED'(216018176) from:'UICC_Master_Process', executing SIM_OnEvent_SIM_StatusChanged()
1622 CBS: cbs_main.c: EVENT_SIM_STATE_CHANGED accepted
1622 CBS: cbs_main.c: CBS_Manager_SAT_DataDownload_Activate: SIM STATE 7, process 0
1622 SPBC <- SIM STATE 7BT/BT.c: 1317 HostController_Init: Configured for "STLC2500x"
1641 BT/BT.c: 1876 DirName = "/ifs/corrections"
1647 BT/BT.c: 2048 ST Microelectronics: BT2.0+EDR, LM_Version = R5A
STLC2500 R4.2 12102005 12:40:14 ZAV100012
HW Id= V440BAA
1647 BT/BT.c: 2068 CHIP_ID = 0x00000000, HCI_Revision = 0x0402, BT_LMP_Subversion = 0x0520
1649 BT/BT.c: 2303 Download: STLC2500_R4_02_A7.ptc, Size = 10820
1664 GDFS_SRV Queue full
1741 GDFS_SRV Queue empty
1805 GDFS_SRV Queue full[sysctrl] Controlled initialization of processes complete
1819 WAP:Start (process id 0x100A5)
1819 IrDA_ll.c:: IrLAP Nickname: Sony Ericss
1819 IrDA_lap_rec.c: IrLAP process ready !
1819 IrDA_lmp_rec.c: IrLMP process ready !
1819 IrDA Request signal base: 98566208 (0x5e00040)
1819 IrDA Response signal base: 98567744 (0x5e00640)
1819 IrDA Event signal base: 98569344 (0x5e00c80)
1819 IrDA Module Internal start: 98571584 (0x5e01540)
1819 IRLAP_CONNECT_IND: 98571648 (0x5e01580)
1819 LM_CONNECT_REQ: 98573696 (0x5e01d80)
1819 IrDA Module Internal end: 98575616 (0x5e02500)
1819 IrLAP_ process Id = 0x100b7
1819 IrLMP_ process Id = 0x100b8
1819 EILD_LLIrDA_Driver_Process_ process Id = 0x100c4
1821 WAP: File API Initiated
1821 WAP: fileMkDir(.../msm)
1823 WAP: created task 0
1824 WAP: fileMkDir(.../stk)
1824 WAP: fileMkDir(.../stk/tmp)
1829 WAP: created task 1
1830 WAP: createTask failure for 2
1830 AT/ AT-3; Received Sig:'RESPONSE_RS232_GETCAPABILITIES'(67109888) from:'RS232_Process', executing CEI_OnRS232_GetCapabilities()
1830 AT/CEI_OnRS232_GetCapabilities: Warning !! The channel already destroyed, execution stopped: ClientTag = d!
1833 MSG: msgmain.c: State 255 changed to state 0
1833 PBS Process started. Cache all records. Table Version 16.
1833 PBS SIM Support1: 0111111111
1833 PBS SIM Support2: 1111111001
1833 PBS SIM Support3: 1111110111
1833 PBS SIM Support4: 1111111001
1833 PBS: Dispatch PHB_NO_ACCESS
1905 MSG: msgmain.c: State 0 changed to state 1
1905 MSG: msgmain.c: EVENT_SIM_STATE_CHANGED accepted
1905 MSG: msgmain.c: SIM_STATE NOT Active
1905 MSG: msgmain.c: EVENT_SIM_STATE_CHANGED accepted
1905 MSG: msgmain.c: SIM_STATE NOT ActiveBT/BT.c: 2303 Download: STLC2500_R4_02_05_SEMC_norssi.ssf, Size = 277
1949 BT/BT.c: 2175 Data missing in GDFS ?!, DS_FileSize = 0, ==> skip download
1949 BT/BT.c: 2196 Failed to download GD_BT_Dynamic_Settings_File
1973 GDFS_SRV Queue emptyGDFS_Wrapper: GDFSW_RestoreFromFile finished:ERRORS were found!!!
1974 GDFS_SRV Queue full
1988 @NWS: RadioStartMode: 0
1991 MALL: **** NEW MAXIMUM HEAP 0 USAGE: 516064 bytes requested in total ****
1996 FS: Partition / set to clean
1996 FS: Partition /ifs set to clean
1997 FS: Partition /usb set to clean
### GDFS_WriteProcess shut down the Print Server! ###
###################################################################################
###################################################################################
This is the Platform Error handler
SW Build: R8BE001 prgCXC1250811_GENERIC_SM
An error has been reported by the kernel:
user_called : 0x0
error code : 0x800c0113 OSE_EUNEXPECTED_EXCEPTION_REGDUMP
subcode : prefetch abort (instruction fetch memory abort) OSE_KRN (0x000c0000)
product : Kernel
header file : ose_err.h
extra : 0x202aa888
mode : supervisor
reg PC : 0x450A2994
reg LR : 0x450A2C73
reg PSR : 0x60000033
reg SP : 0x202AA954
Current Process: 0x0001009a
Process Name: GDFS_WriteProcess
File:
Line: 0
CRASH ID: 0x521007D1
FAR: 0x450A2C73
IMEI: 353153-02-151354
Saved print info: start 0x202E8E50 size 50000 pos 30579
Prints on queue info: start 0x00000000
### Saved Print Lines #############################################################
Did a soft reset of the IrDA-block
IRPHYLib_PowerUpInit:
OS: Installed system tick
OS: Starting FSS
FS: *** This is SEMC FS ***
FS: Server processes started.
FSFLASH: CPU is ARM 926, revision 3, architecture 6
FSFLASH: Inst Cache size is 32.00 Kb, 4-way, 32 bytes/line.
FSFLASH: Data Cache size is 16.00 Kb, 4-way, 32 bytes/line.
после рипейра GDFS через сетул и прошивки (правда CID52) имеем почти аналоичную ошибку:
Код:
1456 BT/EBT_sil.c: 399 SIL_OpenConnection: Start event OK!
1486 FSX: Unable to create mem stick directory structure - continuing anyway!GDFS_Wrapper: **** Up and running ****
1493 AT process: Awake and AT your service!
1493 AT/SysInfo SYS_VENDOR_NAME: Sony Ericsson
1493 AT/SysInfo SYS_PRODUCT_NAME: Sony Ericsson K810
1493 AT/SysInfo SYS_PRODUCT_VERSION: 0000
1493 AT/SysInfo SYS_SW_ID: 2007-05-23 13:34 Off.Bld CRH109338_14_R13A007 cxc1329257_U250_PT_PHONE
1493 AT/SysInfo SYS_SW_PRODUCT_ID: CRH109338_14_R13A007 cxc1329257_U250_PT_PHONE
1493 AT/SysInfo SYS_SW_VERSION: CRH109338_14_R13A007
1493 AT/SysInfo SYS_SW_VERSION_DATE: CRH109338_14_R13A007
1504 GDFS_Wrapper: GDFSW_RestoreFromFile called.
1507 FS: Partition / set to clean
1509 FS: Partition /ifs set to clean
1513 FS: Partition /usb set to clean
1529 GDFS_SRV Queue full
1555 GDFS_SRV Queue emptyBT/BT.c: BT_RECEIVE_W_TMO: Timeout after 500 ms
1582 EILD_HCITL.c: 1729 UART ClockRequest: ON
1582 BT/EBT_sil.c: [Tx] HCI_Reset:
1582 EILD_HCITL.c: 1847 PowerManagement: Wake-up from sleep mode:
1584 EILD_HCITL.c: 1460 R_Do_Send:
1584 201C4B28 .... 01 03 0C 00
1590 GDFS_SRV Queue full
1604 GDFS_SRV Queue emptyEILD_HCITL.c: 1558 Done_Receive:
1606 201C3B2A ....... 04 0E 04 02 03 0C 00
1606 BT/EBT_sil.c: [Rx] HCI_Command_Complete_Event:
1606 BT/BT.c: 6345 HCI_CONFIGURE_PORT_CNF:
1606 BT/BT.c: 6334 HCI_START_CNF:
1612 GDFS_SRV Queue full
### GDFS_WriteProcess shut down the Print Server! ###
###################################################################################
###################################################################################
This is the Platform Error handler
SW Build: R6BC002 prgCXC1250811_GENERIC_SM
An error has been reported by the kernel:
user_called : 0x0
error code : 0x800c0113 OSE_EUNEXPECTED_EXCEPTION_REGDUMP
subcode : prefetch abort (instruction fetch memory abort) OSE_KRN (0x000c0000)
product : Kernel
header file : ose_err.h
extra : 0x202aa680
mode : supervisor
reg PC : 0xFFFFFFFC
reg LR : 0x4509C50B
reg PSR : 0x60000033
reg SP : 0x202AA750
Current Process: 0x0001009a
Process Name: GDFS_WriteProcess
File:
Line: 0
CRASH ID: 0x08AB0655
FAR: 0xFFFFFFFC
IMEI: 353153-02-151354
Saved print info: start 0x202E953C size 50000 pos 38328
Prints on queue info: start 0x00000000
а что вообще это за BT?:
1949 BT/BT.c: 2175 Data missing in GDFS ?!, DS_FileSize = 0, ==> skip download
1949 BT/BT.c: 2196 Failed to download GD_BT_Dynamic_Settings_File
---
а после GDFS от сетула:
1606 BT/BT.c: 6345 HCI_CONFIGURE_PORT_CNF:
1606 BT/BT.c: 6334 HCI_START_CNF:
все-же, наверное придется основную флешку попробовать поменять....
Последние файлы
