Re: Ainol Novo 10 Hero - ремонт цепи заряда
#2
Источник
MP26123
Product MP26123
Product Info 2A,24V Input, 600kHz 2/3-Cell Switching Li-ion Battery Charger
Description The MP26123 is a monolithic DC-DC step-down switching charger for 2- or 3-cell Li-ion battery packs. It has an integrated high-side power MOSFET can output up to a 2A charge current. It also has peak-current–mode control for fast loop response and easy compensation. The MP26123 uses a sense resistor to control a programmable charge current, and accurately regulates the charge current and charge voltage using two control loops. The MP26123 has multiple fault condition protections that include cycle-by-cycle current limiting and thermal shutdown. Other safety features include battery temperature monitoring and protection, charge status indication and programmable timer to cease the charging cycle when timer out. The MP26123 requires a minimal number of readily-available external components. The MP26123 is available in a 4mm x 4mm 16-pin QFN package.
Features • Charges 2- or 3-Cell Li-Ion Battery Packs
• Wide Operating Input Range
• Programmable Charging Current of up to 2A
• ±0.75% VBATT Accuracy
• 0.2Ω Integrated Power MOSFET
• Up to 90% Efficiency
• Fixed 600kHz Frequency
• Preconditioning for Fully Depleted Batteries
• Charging Status Indicator
• Input Supply Fault Indicator
• Thermal Shutdown
• Cycle-by-Cycle Over-Current Protection
• Battery Temperature Monitor and Protection
Efficiency Curve
Vin (Min) (V) 9
Vin (Max) (V) 24
# of Cells 2/3
Icharge (A) Up to 2
Trickle Charge Yes
Charge Status Yes
Charge Type CV/CC Switching
Switching Freq (kHz) 600
Package 1 QFN16
Datasheet Download
Click here to download datasheet
Eval Board Download EV26123DR-00A
Последние файлы
