Re: N97 rm-555 не могу снять user lock
#29
Лог MT Box:
Код:
0050f31993: 0050F31993 - Nokia Flash/Repair v2.36.1
Box: CR V 1.002 256
Code: NK V 2.001 1055
SN:
Nokia Unlimited: 1711 times started
SonyEricsson Trial: 9 left, each max 15min
Scanning files, please wait...
Done
Selected Highest installed version: 12.0.110
Mcu RM-555_12.0.110_prd.core.C00
Ppm RM-555_12.0.110_prd.rofs2.V11
Ppm RM-555_12.0.110_C01_prd.rofs3.fpsx
Content RM555_12.0.110_uda_3_001.uda.fpsx
Content rm555ENOA09w24v0.050.fpsx
MemoryCardContent
RM555_RM553_101_000_M011_8G.fpsx
WARNING:
THE VERSION YOU SELECTED: 10.0.020
is NOT the highest installed!!!
the highest available is: 12.0.110
Mcu RM-555_10.0.020_prd.core.C00
Ppm RM-555_10.0.020_prd.rofs2.V11
Ppm RM-555_10.0.020_C01_prd.rofs3.fpsx
Content RM555_10.0.020_uda_3_001.uda.fpsx
Content rm555ENOA09w24v0.040.fpsx
MemoryCardContent
RM555_RM553_014_000_M011.fpsx
FAILED to find USB Device.
Attach phone to usb port!
Switched to USB BUS
Processing File: RM-555_10.0.020_prd.core.C00
Boot...
CONNECT PHONE to USB and Power ON phone!
Pooling for phone...
\\?\nmwcd#vid_0421&pid_0106&if_oth#6&7873e96&0&00#{4f919102-4adf-11d5-882d-00b0d02fe381}
Sending ULO code
Isa UPDAPP
RAP3NAND
PASUBTOC
UPDAPP
Pooling for device removal...
Device removed
Pooling for ADL device...
Raw flashing...
%%%%%%%% ERROR BOOTING:
Processing File: RM-555_10.0.020_prd.core.C00
Boot...
CONNECT PHONE to USB and Power ON phone!
Pooling for phone...
\\?\nmwcd#vid_0421&pid_0106&if_oth#6&7873e96&0&00#{4f919102-4adf-11d5-882d-00b0d02fe381}
Sending ULO code
Isa UPDAPP
RAP3NAND
PASUBTOC
UPDAPP
Pooling for device removal...
Device removed
Pooling for ADL device...
Raw flashing...
%%%%%%%% ERROR BOOTING:
Лог Cyclone:
Код:
Handling device: [Cyclone Team], [Cyclone Box]
Initializing box...
Box Firmware: Cyclone Nokia Application v01.58, (Mar 28 2011 11:13:30, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2011 wk9
Hardware Platform: Cyclone Classic Flasher Interface (c) 2008,2009 KarwosLabs
Box Serial Number: C0000D13
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2009, wk01 / wk06
Initializing security card...
Card Serial Number: D
Card Firmware Revision: 0109
Card is activated
Box is activated
Super DCT4 Activation: TRUE
Initializing FBUS...
All initialized - Ready to work
Retrieving Variants for Product RM-555 - wait...
24 Variants Retrieved
Processing pre flash tasks...
Pre flash tasks finished, continuing...
Processing RM-555_10.0.020_prd.core.C00 (CMT)...
Booting CMT...
[Nokia USB Flashing Generic]: Port opened OK!
Old ROM Detected
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101051103
CMT_EM_ASIC_ID: 00000296
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 0EF00004139D005209157838F8B79EA4DE0FF0FA
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 479C6DDE3942E12C429C1D6ADED80371
CMT_BOOT_ROM_CRC: 4B9B7510
CMT_SECURE_ROM_CRC: 3E691FF8
CMT Ready!
RM-555_10.0.020_prd.core.C00, Type: Flash Image, Algo: XSR 1.6, BB5
Searching for BootCode: DualLine 32Bit
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.10.48.1, Algo: BB5
Using NEW BB5 FLASHING PROTOCOL
Waiting for USB Boot ROM Answer...
Processing Flash Image Failed ->
The ROM Refused to start Secondary Loader. Common Reasons:
1. Battery voltage is too low.
2. Transmission error occured. Usually happens when You put battery on while USB cable plugged. Try unplug USB cable, re-insert battery, plug USB Cable.
3. Check USB cable quality, connect to USB 2.0 Port
4. It may be also phone hardware problem
5. Also, loader may be corrupted, or current BootROM don't support it (affected are RAP3Gv3 and RAPIDO phones)
Failed to Process all Image files -> Failed to process RM-555_10.0.020_prd.core.C00
Лью версию ниже, стояла 12, не дает в себя ее вливать, через кабель без downgrade льет 10, но не вкл, вливаю 12 включается и опять User Lock!
После этих процедур заряжается на шнурке
Erase есть у кого-нибудь?????
Последние файлы
