COM4 [Serial2] selected
Модуль  v3.25
Модель: Autodetect 6228-6253 NAND
Проверка данных, ждите...
Action: write flash NAND
Запись Firmware
BENRUI35_09A_PCB01_GPRS_MT6235B_S01.BR35_V02_21__firmware_20101203-113507.B4M.bin
пропуск: Customization/Language Pack
пропуск: Customization
пропуск: Eeprom/ffs
nfi area detection...
bootloader version: BENRUI35_09A_BOOTLOADER_V005_MT6235B_BR35_V02_21.bin
nfi area detection (3 cores) finished: Ok
interface: BROM_DLL_v3.1016.00
соединение...
Аппарат должен быть выключен !
Нажмите и ДЕРЖИТЕ кнопку включения !
Connecting...
Booting...
Отпустите кнопку включения !
bootcode current/expected: 3.2/3.2
CPU: 6235:8A04:8A01
status: FF
bbchip bl ver: FE
NOR flash chip: not installed
NAND flash id[0017]: 00AD:007600AD0076 [HYNIX] HY27XS08121M
chip size: 64Mb
page/spare size: 0200/0010
pages per block: 0020
bits i/o: 08
address cycles: 04
internal RAM size: 00010000
external RAM: S_DA_RAM_ERROR
Готов
Set baudrate (921600)...
Готов
ram test...
testing...
ram test passed
===>  detect existing firmware structure...
detect ffs...
detect sec ro...
detect custom parameters...
detect project-id...
detect NAND info...
number of areas/bytes to read: 1:00034000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
nfi area detection...
предупреждение: header is empty: probably flash chip completely erased
предупреждение: can not detect header
nfi area detection (0 cores) finished: failed
предупреждение: ffs can not be detected
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
startup code area #1 detection done
code offset: 00000000
===>  Готов
nfi area detection...
bootloader version: BENRUI35_09A_BOOTLOADER_V005_MT6235B_BR35_V02_21.bin
nfi area detection (3 cores) finished: Ok
startup code area #1 check...
rpl file not found: C:\Program Files\InfinityBox\ChineseMiracle\id.00006235.[BENRUI35_09A_PCB01_GPRS_MT6235B_S01.BR35_V02_21.BIN_6C0EE8A9].rpl
rpl file not found: C:\Program Files\InfinityBox\ChineseMiracle\id.00006235._BENRUI35_09A_PCB01_GPRS_MT6235B_S01.BR35_V02_21.BIN_6C0EE8A9_.rpl
rpl file not found: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\id.00006235.[BENRUI35_09A_PCB01_GPRS_MT6235B_S01.BR35_V02_21.BIN_6C0EE8A9].rpl
rpl file not found: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\id.00006235._BENRUI35_09A_PCB01_GPRS_MT6235B_S01.BR35_V02_21.BIN_6C0EE8A9_.rpl
====================
предупреждение: unknown firmware: BENRUI35_09A_PCB01_GPRS_MT6235B_S01.BR35_V02_21.BIN_6C0EE8A9
Unknown firmware found (v.3.25, database date: 30.11.2010), user action required:
1. download latest software from support area and try again
2. if no still luck follow the next procedure:
- find good working phone with the same firmware:
  BENRUI35_09A_PCB01_GPRS_MT6235B_S01.BR35_V02_21.BIN
- make "Читать full flash" operation
- send flash backup files to support: [email protected] or upload files to http://rapidshare.com or http://4shared.com
- include in your e-mail full text from phone back label (phone name etc.)
- be little bit patient and wait update
====================
ошибка: startup code area #1 can't be fixed
You can flash phone now but can not finalize it,
in most cases phone CAN NOT power-on.
Do you want to continue anyway ?
number of cores: 3
loading files...
number of areas: 3
Готов
write...
write bootloader...
.
.
write core...
Disconnect...
Готов
Закончено, потребовалось времени: 9 min 44 sec
Отключите/подключите батарею !