Re: OT-C701x-Range check error
#2
Перешел на версию InfinityUpdate_MModule_v2.15 и сделал успешно security area, затем формат и получил рабочий тел.
Код:
Device: Alcatel OT-C701X, OT-C701A
Done
COM4 [VCP0] selected
Device: Alcatel OT-C701X, OT-C701A
Checking data, wait...
advanced flash detection enabled
Action: repair security area
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6226:8A03:8A02]...
CPU: MT6226
chip: 0031:DD98:A000
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22302200:2BEA0000000000
flash: Amd AMD/Fujitsu std [D 0004x008000 00FEx020000 0004x008000] 32Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
921600
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: C:\Program Files\InfinityBox\MModule\backup_security\id.CB640646.[JRD26_06A_PCB01_GPRS_MT6226_S02.MAUI_06A_W06_52_SP1_V24.BIN_A8DA411C].rpl
identification#1 detection finished
device-id: CB640646
identification#1 protocol ver: 05
ver. sw1: JRD26_06A_PCB01_GPRS_MT6226_S02.MAUI_06A_W06_52_SP1_V24.BIN
ver. sw2: MAUI.06A.W06.52.SP1.V24, E3BE2557
ffs offset/size: 01200000/00E00000
detect device identification#2...
detection phase #1...
detect device identification#2 finished
security area#3 calculation...
customization: CC19BN23
done
flash: 01227E22302200:2BEA0000000000
flash: 01227E22302200:2BEA0000000000
Write: security area#3
security area#3 calculation done
security area#2 calculation...
..................done
flash: 01227E22302200:2BEA0000000000
flash: 01227E22302200:2BEA0000000000
Write: security area#2
security area#2 calculation done
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
flash: 01227E22302200:2BEA0000000000
Backup required data Done
Patch required data...
Patch required data Done
Special operation...
Special operation Done
Write...
Write Done
Finalization...
Finalization Done
file saved: C:\Program Files\InfinityBox\MModule\backup_system_log_CB640646_JRD26_06A_PCB01_GPRS_MT6226_S02.MAUI_06A_W06_52_SP1_V24.BIN_A8DA411C_20081219-002221.B0X.bin
Finished, time used: 85 sec
Remove/Install battery now !
WARNING ! Settings will be cleared, user data erased, Imei set to default value !
Make flash backup before this procedure !
Do you want to continue ?
COM4 [VCP0] selected
Action: reset settings
Model: Alcatel OT-C701X, OT-C701A
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing[6226:8A03:8A02]...
CPU: MT6226
chip: 0031:DD98:A000
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E03
Date: 2005.04.12
Version: 1.0
Version: MAUI.06A.W06.52.SP1.V24
Version: JRD26_06A_HW
45 byte(s) read
imei: 35320501043584
connection Ok
building list...
done
items to clear: 325
warning: wrong packet cs
warning: wrong packet cs
300 of 325 items cleared
building list...
done
25 items remains
Finished, time used: 142 sec
Remove/Install battery now !