K300 не заряжается

Новое

Layder
Член группы поддержки продукта

Сообщений:: 2,007

Регистрация:: 08.06.2006

Возраст:: 48

Рейтинг мнений: 1112

Вес репутации: 560

K300 не заряжается #1

Вообщем пришел ко мне с перемычками вместо стекляшки на зарядку-интерфейс.
Поставил сразу стекляшку. При выключеном телефоне и подключении БП в качестве зарядки - пытается запуститься, потребляет 280мА пару секунд, появляется заставка SE (почему-то с повышенным контрастом), перестает потреблять, выключается. При включеном состоянии - показывает зарядку, потребление также: появлется, потом пропадает. Заменены все по 2 раза(т.к. ставил с разборки): стекляшка, контроллер питания, транзитор-ключевик заядки, резистор 0,1 ома, 2 резитора по 0.50 ома (около батареи), процессор, тело прошито фуллом с GDFS, все так и осталось. Батареи разные пробовал. Само тело работает без проблем.
Есть идеи? Или в утиль?

p.s.
додумался посмотреть лог при старте, нашел это:

Код:

552       BATT: Battery type is UNKNOWN
557       BATT: Measurements are 2798 mV and 0.0 mA
557       BATT: Charge current (0.0 mA) based remaining capacity is 100.0%

средний контакт батареи идет на контроллер питания. а откуда процессор узнает о типе батареи? смотрел схему, пока ничего не нашел.
кому интересно, вот полный лог:

Код:

OS: core startup of System
OS: MM init and instruction cache setup
OS: Installing static device drivers
OS: Starting RTC
OS: current time Thu Jan  1 00:01:07 1970
OS: Starting HEAP
OS: Memscan found Flash @ 0x44000000 Size=0x2000000
OS: Memscan found RAM   @ 0x4c000000 Size=0x800000
OS: Memscan found unknown area @ 0x50000000 Size=0x2000000
OS: Starting FAM
OS: Flash area base:0x44000000 size:0x2000000 driver:cfi params:
OS: Executable flash area base:0x44000000 size:0xf00000
OS: Executable flash area base:0x45000000 size:0x200000
OS: MMU and data cache setup
FS: *** This is SEMC FS ***
FS: Server processes started.
FSFLASH: CPU is ARM 926, revision 3, architecture 6
FSFLASH: Inst Cache size is 16.00 Kb, 4-way, 32 bytes/line.
FSFLASH: Data Cache size is 8.00 Kb, 4-way, 32 bytes/line.
FSFLASH: NOR Flash device @ [0x44000000-0x45FFFFFF] 32768 Kb
FSFLASH: Vendor (0x20): ST
FSFLASH: Device ID: 0x880D
FSFLASH: Write Buffer Size: 64 bytes
FSFLASH: Erase region [0x44000000-0x45FDFFFF] has an erase block size of 128 Kb
FSFLASH: Erase region [0x45FE0000-0x45FFFFFF] has an erase block size of 32 Kb
FSFLASH: Write processes started, pid = 0x10025.
FSFLASH: Erase processes started, pid = 0x10026.
FSFLASH: Logical flash block size is 256 Kb
FSFLASH: File system flash segment 0 located in NOR @ [0x44D00000,0x44EFFFFF] (2048 Kb)
FSFLASH: File system flash segment 1 located in NOR @ [0x45000000,0x45FFFFFF] (16384 Kb)
FSFLASH: Pack Process started, pid = 0x10027.
MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 1024 bytes requested in total ****
FSFLASH: 72 flash block(s) available (out of 72)
FSFLASH: Number of AVAILABLE file system blocks: 18104
FSFLASH: Number of USED file system blocks: 4198
FSFLASH: Number of DIRTY file system blocks: 138
FSFLASH: Number of CLEAN file system blocks: 14024
FSFLASH: Number of BAD file system blocks: 0
FS: Mounting file system partition /
FS: Mounting file system partition /tpa/system/bg_images/cache
FS: Mounting file system partition /ifs
FS: Mounting file system partition /system
FS: Mounting file system partition /smsdata
MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 2048 bytes requested in total ****
BuildInfo: Label: <BAS_CORA_CRH109497_R5N_050524_0831> Variant: <cxc1328697_G200_PHONE_KRISTINA> 
BuildInfo: Generated: 2005-05-24 09:08 by EMLDEHS
Product  : <K300 series> Version: 0001
HW Setup : Marita Compact (Id:0x8000) IRDA: B004 BT: C002 RS232: A004 
Vendor   : <Sony Ericsson> PNP: SER USB: 0FCE BT: 0000 
Prototype start process started!
MPH NullState
RLC: RLC_LLC
RLC: RLC_IDLE_REQ = 7385
RLC: RLC_GMM_DATA_REQ = 7386
RLC: RLC_DATA_REQ = 7387
RLC: RLC_UNITDATA_REQ = 7388
RLC: RLC_RLC_DATA_REQ = 7389
RLC: RLC_RLC_UNITDATA_REQ = 7390
RLC: RLC_DATA_RSP = 7391
RLC: LLC_RLC
RLC: RLC_DATA_CNF = 7395
RLC: RLC_DATA_IND = 7396
RLC: RLC_STATUS_IND = 7397
RLC: RR_RLC
RLC: RR_TBF_ESTABLISH_REQ = 6910
RLC: RR_UPLINK_TBF_RELEASE_REQ = 6912
RLC: RR_DOWNLINK_TBF_RELEASE_REQ = 6913
RLC: RR_TBF_RELEASE_RSP = 6914
RLC: RR_DOWNLINK_ACK_NACK_REQ = 6915
RLC: RLC_RR
RLC: RR_TBF_ESTABLISH_CNF = 6920
RLC: RR_UPLINK_TBF_RELEASE_CNF = 6922
RLC: RR_DOWNLINK_TBF_RELEASE_CNF = 6923
RLC: RR_TBF_ESTABLISH_IND = 6921
RLC: RR_TBF_RELEASE_IND = 6924
RLC: RR_UPLINK_ACK_NACK_IND = 6925
RLC: PH_RLC
RLC: PH_RLC_DATA_REQ = 7250
RLC: PH_RLC_DATA_RELEASE_REQ = 7252
RLC: PH_RLC_CONTROL_REQ = 7253
RLC: PH_RLC_CONTROL_CONTROL_0_PDCH_REQ = 7255
RLC: PH_RLC_CONTROL_CONTROL_1_PDCH_REQ = 7256
RLC: PH_RLC_CONTROL_CONTROL_2_PDCH_REQ = 7257
RLC: PH_RLC_CONTROL_CONTROL_3_PDCH_REQ = 7258
RLC: PH_RLC_CONTROL_CONTROL_4_PDCH_REQ = 7259
RLC: PH_RLC_CONTROL_CONTROL_5_PDCH_REQ = 7260
RLC: PH_RLC_CONTROL_DATA_0_PDCH_REQ = 7261
RLC: PH_RLC_CONTROL_DATA_1_PDCH_REQ = 7262
RLC: PH_RLC_CONTROL_DATA_2_PDCH_REQ = 7263
RLC: PH_RLC_CONTROL_DATA_3_PDCH_REQ = 7264
RLC: PH_RLC_CONTROL_DATA_4_PDCH_REQ = 7265
RLC: PH_RLC_CONTROL_DATA_5_PDCH_REQ = 7266
RLC: PH_RLC_CONTROL_CONTROL_0_PDTCH_PDCH_REQ = 7267
RLC: PH_RLC_CONTROL_CONTROL_1_PDTCH_PDCH_REQ = 7268
RLC: PH_RLC_CONTROL_CONTROL_2_PDTCH_PDCH_REQ = 7269
RLC: PH_RLC_CONTROL_CONTROL_3_PDTCH_PDCH_REQ = 7270
RLC: PH_RLC_CONTROL_CONTROL_4_PDTCH_PDCH_REQ = 7271
RLC: PH_RLC_CONTROL_CONTROL_5_PDTCH_PDCH_REQ = 7272
RLC: PH_RLC_CONTROL_DATA_0_PDTCH_PDCH_REQ = 7273
RLC: PH_RLC_CONTROL_DATA_1_PDTCH_PDCH_REQ = 7274
RLC: PH_RLC_CONTROL_DATA_2_PDTCH_PDCH_REQ = 7275
RLC: PH_RLC_CONTROL_DATA_3_PDTCH_PDCH_REQ = 7276
RLC: PH_RLC_CONTROL_DATA_4_PDTCH_PDCH_REQ = 7277
RLC: PH_RLC_CONTROL_DATA_5_PDTCH_PDCH_REQ = 7278
RLC: PH_RLC_RELEASE_REQ = 7279
RLC: RLC_PH
RLC: PH_RLC_DATA_CNF = 7290
RLC: PH_RLC_DATA_IND = 7291
RLC: PH_RLC_DATA_RTS_IND = 7292
RLC: PH_RLC_DATA_RELEASE_CNF = 7293
RLC: PH_RLC_CONNECT_IND = 7294
RLC: PH_RLC_CONTROL_CNF = 7295
RLC: PH_RLC_CONTROL_IND = 7296
RLC: PH_RLC_RELEASE_CNF = 7297
RLC: RLC_TIMER
RLC: RLC_TIMER_T3164 = 7465
RLC: RLC_TIMER_T3166 = 7466
RLC: RLC_TIMER_T3180 = 7467
RLC: RLC_TIMER_T3182 = 7468
RLC: RLC_TIMER_T3190 = 7469
RLC: RLC_TIMER_T3192 = 7472
RLC_UL: S I
RR: PID 65596
RR: TIMER_PRIM 7582 
RR: MPH_RR_PRIM 6720 
RR: RR_MPH_PRIM 6770 
RR: RR_RLC_PRIM 6910 
RR: RLC_RR_PRIM 6920 
RR: PH_MPH_PRIM 7010 
RR: MPH_PH_PRIM 7080 
RR: PH_RLC_PRIM 7250 
RR: RLC_PH_PRIM 7290 
LLC: PID 65600
LLC: <SMS 3822
LLC: >SMS 3833
LLC: <SNDCP 7340 7348
LLC 1: state 0
LLC 3: state 0
LLC 5: state 0
LLC 7: state 0
LLC 9: state 0
LLC 11: state 0
RLC_DL: S ILLDebug_Init: LLDEBUG cable detected
ACB/Debug driver: LLDEBUG cable detected
ACB/Debug driver: Error PD_GPIO_InterruptUnsubscribe failed
### Print Server: Requesting DebugMux channel...
141       ### Print Server: Started OK
142       Prototype Start Process [File System Version Control]: Type OK (Kristina)
[142       Prototype Start Process [File System Version Control]: Version OK (P5T)
144       RLink: RLINK_PH
R
144       RLink: PH_RLINK_CONNECT_IND = 6672
144       RLink: PH_RLINK_DISCONNECT_IND = 6673
144       RLink: PH_RLINK_RTS_IND = 6670
144       RLink: PH_RLINK_DATA_IND = 6671
144       
RLC: PH_RLINK
144       RLink: PH_RLINK_DATA_REQ = 6660
144       
RLink: RLINK_RLP
144       RLink: RLINK_RLP_RTS_IND = 4990
144       RLink: RLINK_RLP_DATA_IND = 4994
144       
RLC: RLP_RLINK
144       RLink: RLINK_RLP_DATA_REQ = 4995
144       RLink: RLINK_RLP_DTX_REQ = 4996
144       
RLC: RLINK_RR
144       RLC: RR_CHANNEL_MODE_INFO_IND = 42861
145       RLC: RR_CHANNEL_MODE_MODIFY_IND = 42862
145       RLink: State Idlesysctrl] Initializing Interactive Debug support.
147       RH: Activate on LRRAT = 0
147       RH state: Inactiveational Rose RealTime C Target Run Time System
147       Release 6.50.C.00 (-Cl,G0,-L,+Me,-O)
147       Copyright (c) 1993-2003 Rational Software
148       SM: Initiated; ProcessID = 65652 !MM: reset TMSI
149       MM: No valid GSM keys
149       MM: No valid WCDMA keys
149       MM: TVP Probe P_UAS_CAS_MM_Status Error
149       MM: state 0
149       MM: TVP Probe P_UAS_CAS_MM_Status ErrorGMM: ResetSIM_Data
150       GMM: No valid GSM-GPRS keys
150       GMM: No valid WCDMA keys
150       LLC 1: Unexpected signal #7417* CC1 state 0
151       * CC2 state 0
151       * CC3 state 0
151       * CC4 state 0
151       * CC5 state 0
151       * CC6 state 0
151       * CC7 state 0
151       DRM: DRM_Process started
156       Assert Failure in .\cxc1328697_G200_PHONE_KRISTINA\IAR-ARM7\inc\dispdrv_phys_pdi.c(980)
158       MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 2296 bytes requested in total ****
160       SS: State Idle @
160       CallMeter started
160       SMC_MO_1 (65627) state 4
160       SMC_MO_2 (65628) state 4
160       SMC_MT (65629) state 4
160       SMR_MO state 3
160       SMR_MT state 3
160       GDFS_SRV State 1-ClosedAM: MODULE_INIT
163       [sysctrl] Enabling UICC refresh task.
163       R2BA010     prgCXC125978_EU_1_KR
163       [SIM] State Changed: SIM_STATE_NULL, Appl: 0, Ref: 0
171       GDFS: Format version 1
173       GDFS Log[0] <- Phys[0]  56098 bytes left. Erased     0 times
175       GDFS Log[1] <- Phys[1]  62790 bytes left. Erased     0 times
178       GDFS Log[2] <- Phys[2]  18537 bytes left. Erased     0 times
180       GDFS Log[3] <- Phys[3] 105538 bytes left. Erased     0 times
180       GDFS Log[4] <- Phys[4] 106367 bytes left. Erased     0 times
181       GDFS Log[5] <- Phys[5] 107273 bytes left. Erased     0 times
181       GDFS Log[6] <- Phys[6] 131060 bytes left. Erased     0 times
183       GDFS_SRV State 2-Opening
184       CC: speech ver config 2 0 1 15 15
184       CC: TTY mode = 0
184       * CC0 state 0
185       MPH: PacketChannels activated 
185       RR Multislot class GPRS = 8
185       RR state 0
185       MS_TYPE = MS_EGSM900_DCS1800_PCS1900
185       MPH:SelectedModeIndex=1
186       MPH_GD_Info.SensitivityLimit_dBm[BAND_GSM900_OR_EGSM900] = -107
186       ETX OK
186       MPH_GD_Info.SensitivityLimit_dBm[BAND_DCS1800] = -107
187       MPH_GD_Info.SensitivityLimit_dBm[BAND_PCS1900] = -107
187       MPH_GD_Info.SensitivityLimit_dBm[BAND_GSM850] = -107
187       MPH_GD_Info.MinNrOfIdentifiedCellsToSkipWeakCells = 0
189       MMM IMEI = 359986-00-822369-0, IMEI_SVN = 22
189       MMM EqPLMN List read from GDFS, nbr=1, 257 2 
189       MMM: TVP Probe P_UAS_CAS_PLMN_List Error
189       MMM state 0
189       MMM MM_SIM_DATA_SET_REQ
192       DebugMux[IMEI] Length=8, TypeOfID=2, OddEven=1, Digits: 3 5 9 9 8 6 0 0 8
195       [lockctrl] SimLock : NOT OK, PhoneLock : NOT OK, Sim Active : NOT ACTIVE
197       IrDA_lap_rec.c: IrLAP process ready ! 
197       IrDA_lmp_rec.c: IrLMP process ready ! 
197       MMM MS_OperationMode=0
197       CCS: Idle
197       SL: SIGID_INTERVAL_START_MOD_NS_CAS = 3660
197       SL: ProcessID = 10055
198       SL: CFG_DISABLE_SECURITY_HANDLING is NOT! defined
198       SL: DUAL_RAT_SUPPORT is NOT! defined
198       SL state 0
198       SL<-EVENT_SIM_STATE_CHANGED in State 0 from 100ac
198       SL: Not active
198       SL new SIM handle=0RLP: process started
198       L2RCOP: process started
198       RLP: state changed to 'S0_ADMandDetached'
198       L2RCOP: state changed to 'Initial'
198       Load Module Starter: Hunt for Program Manager failedACM: Starting Application Side.
201       [sysctrl] start-up cause : Charger Connected
201       [sysctrl] System mode changed from SHUTDOWN/INITIATING to CHARGING/ALARM
201       [sysctrl] System Start-Up is complete
201       [lockctrl] SimLock : NOT OK, PhoneLock : NOT OK, Sim Active : NOT ACTIVE
201       [lockctrl] SimLock : OK, PhoneLock : NOT OK, Sim Active : NOT ACTIVE
201       [lockctrl] SimLock : OK, PhoneLock : OK, Sim Active : NOT ACTIVE
201       [sysctrl] Normal Voltage ind. received from SysPwr
202       [SIM_FILE_UTIL] FCP Cache Size 80AT process: Awake and AT your service!
212       ###Downloading DSP for first time after startup of phone!###
214       DSPIF_INT Exception: MPORTIF Soft reset
214       DSPIF_INT Exception: MPORTIF Soft reset
214       [ICC] Reader Voltage:OFF
214       [SIM-RDR] Fi: 1 Di: 1 Div1: 0 Div2: 0
215       [ICC] Reader Voltage:1V8
218       GVI:ReadyACM.StartMain: Starting First App. id=1...
223       DSPIF_INT Exception: MPORTIF Soft reset
223       DSPIF_INT Exception: MPORTIF Soft reset
223       ACM.StartMain: Start of First App ok.
223       AM: MODULE_INIT_READY
223       
223       
223       ******************************************
223       * Sony Ericsson Mobile Communications AB *
223       * Copyright 2003                         *
223       ******************************************
223       * R2BA010     prgCXC125978_EU_1_KR         *
223       ******************************************
224       
224       
224       AAM: Start initializing persistent data.
224       (OBEX/obex_session.c line: 2224) OBEX Started.
225       RTP_Ctrl started
225       MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 2552 bytes requested in total ****
227       ## DSP VersionIdentity: "Marita Compact DSP midi_pcm_asr CNH1600219_R2L002______ 18Feb2005_13:44:18"
227       MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 3576 bytes requested in total ****
228       MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 4600 bytes requested in total ****
238       [ICC] Reader Voltage:OFF
240       MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 5642 bytes requested in total ****
250       [SIM-RDR] Fi: 1 Di: 1 Div1: 0 Div2: 0
250       [ICC] Reader Voltage:3V
272       [ICC] Reader Voltage:OFF
272       [SIM] WARNING - Destruction of Application Parameters
272       [SIM_FILE_UTIL] Used Cache Records 0
272       [SIM_FILE_UTIL] Max Cache Records  80
272       [SIM] WARNING - Destruction of Card Parameters
272       [SIM] State Changed: SIM_STATE_POWER_OFF, Appl: 0, Ref: 0
272       [lockctrl] SimLock : OK, PhoneLock : OK, Sim Active : NOT ACTIVE
272       SL<-EVENT_SIM_STATE_CHANGED in State 0 from 100ac
273       SL: Not active
273       SL new SIM handle=0
275       MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 6106 bytes requested in total ****
276       MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 6882 bytes requested in total ****
282       MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 7906 bytes requested in total ****AAM: Done initializing persistent data.
339       MMPROT[RTSP]: RTSP Process Started
340       MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 8930 bytes requested in total ****
355       
357       MSG: msgmain.c: State 255OS: Starting ose_memory_mgr
358       OS: core startup complete!
358       GDFS_WR State 1-Closed
358       GDFS_WR Start check
361       MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 9552 bytes requested in total ****GDFS_Wrapper: **** Up and running ****
362       
362       MAPP: OSC charging
377       Watchdog: process up and running.
377       Watchdog: Crash SMS not activated
379       ***** Investigating Language Availability *****
380       MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 10203 bytes requested in total ****
382       MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 10853 bytes requested in total ****
385       MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 11419 bytes requested in total ****
387       AUC_INFO: AC_SetAcousticProperties, /ifs/settings/acoustic/farfield_play.apf
390       EST: FS =     Available, ROM =   Unavailable
390       ENG: FS =   Unavailable, ROM =     Available
390       LAT: FS =     Available, ROM =   Unavailable
391       LIT: FS =     Available, ROM =   Unavailable
391       POL: FS =     Available, ROM =   Unavailable
391       RUS: FS =     Available, ROM =   Unavailable
391       UKR: FS =     Available, ROM =   Unavailable
391       ***********************************************
393       MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 22855 bytes requested in total ****
393       Disp_CreateFont: Creating font 0
393       Disp_CreateFont: Creating font 1
394       Disp_CreateFont: Creating font 2
394       Disp_CreateFont: Creating font 10
394       Disp_CreateFont: Creating font 11
394       Disp_CreateFont: Creating font 12
395       Disp_CreateFont: Creating font 13
395       Disp_CreateFont: Creating font 15
396       *** Disp_SetDefaultGlyph: Font 15 failed to set default glyph!
396       SEMC DISPUTIL Line:1953 OPA_ErrorCode: Unknown ErrorCode
396       Disp_CreateFont: Creating font 16
396       Disp_CreateFont: Creating font 17
397       Disp_CreateFont: Creating font 18
397       Disp_CreateFont: Creating font 20
397       Disp_CreateFont: Creating font 31
397       Disp_CreateFont: Creating font 32
398       Disp_CreateFont: Creating font 33
398       Disp_CreateFont: Creating font 34
398       Disp_CreateFont: Creating font 47
399       Disp_CreateFont: Creating font 55
399       Disp_CreateFont: Creating font 54
406       ***** Investigating Input Features *****
406       Arabic:    NO
406       China:     NO
406       Hebrew:    NO
406       T9:        YES
406       Greek:     NO
406       Cyrillic:  NO
406       Thai:      NO
406       Icelandic: NO
406       Ukrainian: NO
406       Hindi:     NO
406       Bengali:   NO
406       ****************************************
406       ***** Investigating Input Language Availability *****
406       Predictive state is: ON
406       Predictive default (cust) is: ON
407       ENG: allowed = YES, T9-FS =  NO, T9-ROM = YES
407       POL: allowed = YES, T9-FS = YES, T9-ROM =  NO
407       RUS: allowed = YES, T9-FS = YES, T9-ROM =  NO
408       USE: allowed = YES, T9-FS =  NO, T9-ROM = YES
408       UKR: allowed = YES, T9-FS =  NO, T9-ROM =  NO
408       ABC: allowed = YES, T9-FS =  NO, T9-ROM =  NO
408       123: allowed = YES, T9-FS =  NO, T9-ROM =  NO
408       *** (T9) ENG matches USE
408       *** Resolve ok (1), keeping ENG 
408       *****************************************************
411       DRM Init OK
412       DRM_PRS_Process started
412       MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 24406 bytes requested in total ****
418       SL<-REQUEST_VOICECALLVOLUME_SET in State 0 from 100ce
419       SL: Not active
473       MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 25642 bytes requested in total ****
474       MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 29288 bytes requested in total ****
474       MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 33248 bytes requested in total ****
474       MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 35161 bytes requested in total ****
475       MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 37273 bytes requested in total ****
475       MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 39385 bytes requested in total ****
476       MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 41376 bytes requested in total ****
527       [StandbyBook:53] Created
530       ImageViewer_Animation: Can not start animation since no valid area to draw in is set!!
532       MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 43450 bytes requested in total ****
533       [StandbyBook:53] Goto StandbyBook_StandbyPage
533       [InitBook:54] Created
533       [InitBook:54] Goto InitBook_StartUp_Page
533       [InitBook:54] Got focus
537       MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 45734 bytes requested in total ****
537       ImageViewer_Animation: Can not start animation since no valid area to draw in is set!!
539       [InitBook:54] Goto InitBook_ChargingOnly_Page
539       [InitBook:54] Lost focus
539       [StandbyBook:53] Got focus
540       [StandbyBook:53] Goto StandbyBook_ChargingOnly_Page
540       MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 48034 bytes requested in total ****
542       MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 50462 bytes requested in total ****
542       MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 56422 bytes requested in total ****
545       SL<-REQUEST_TTY_MODE_SET in State 0 from 100d3
545       SL: Not active
546       ***** Calling IAC_ServerASC_SetVolume *****
546       ***** RingVolume = 5 ****
546       ***** SUCCESS *****
552       BATT: Battery type is UNKNOWN
557       BATT: Measurements are 2798 mV and 0.0 mA
557       BATT: Charge current (0.0 mA) based remaining capacity is 100.0%
569       
570       [StandbyBook:53] Goto StandbyBook_ShutDown_Page
577       [OnOffBook:55] Created
577       [StandbyBook:53] Lost focus
577       [OnOffBook:55] Got focus
577       [OnOffBook:55] Goto OnOffBook_ShuttingDownPage
620       AUC: Open Audio: ID: 1. Frequency: 3. Prio: 1 Channels: [0,1,0,1]
620       AUC: Open Audio: Open Channels 1, Freq: 3
624       DSPIF_INT Exception: MPORTIF Soft reset
624       DSPIF_INT Exception: MPORTIF Soft reset
626       DSPIF_INT Exception: MPORTIF Soft reset
626       DSPIF_INT Exception: MPORTIF Soft reset
634       DSPIF_INT Exception: MPORTIF Soft reset
634       DSPIF_INT Exception: MPORTIF Soft reset
638       ## DSP VersionIdentity: "Marita Compact DSP midi_pcm_asr CNH1600219_R2L002______ 18Feb2005_13:44:18"
650       [OnOffAnimationBook:56] Created
650       [OnOffBook:55] Lost focus
651       [OnOffAnimationBook:56] Got focus
663       [OnOffAnimationBook:56] Goto OnOffAnimation_ShowAnimation_Page
663       CreateGuiImageViewer is obsolete! Change to new gui_imageviewer interface instead...
813       AUC: Close Audio: ID: 1. Frequency: 3. Channels: [0,1,0,1]. SendEvent: 0
823       AUC: Close Audio: Open Channels 0, Freq: 0
951       
951       WAP:Start (process id 0x10089)
951       WAP: File API Initiated
952       WAP: created task 0
953       WAP: fileMkDir(.../stk)
954       WAP: fileMkDir(.../stk/tmp)
955       WAP: created task 1
958       OAS: 0 Profile Roles active
958        changed to state 0
959       PBS Process started
959       
959       PBS: Dispatch PHB_NO_ACCESS
1062      Crypto-capable module loaded as default.
1082      MSG: msgmain.c: State 0 changed to state 1
1082      MSG: msgmain.c: EVENT_SIM_STATE_CHANGED accepted
1082      MSG: msgmain.c: SIM_STATE NOT Active
1082      MSG: msgmain.c: EVENT_SIM_STATE_CHANGED accepted
1082      MSG: msgmain.c: SIM_STATE NOT Active
1226      Handle_Shell_Timeout: Time-out from non-existent timer: 4c71b25c - Ignored.
1228      Handle_Shell_Timeout: Time-out from non-existent timer: 4c71b25c - Ignored.
1310      BATT: Measurements are 3796 mV and -51.0 mA
1310      BATT: Compensated VBAT (3671 mV) based remaining capacity is 11.6%
1310      BATT: Average remaining capacity is 11.6%
1481      GDFS Free Blk 7 Ok
1481      GDFS_WR Check done
1481      GDFS_SRV State 3-Open
1502      GDFS_WR State 2-Open
1560      BATT: Measurements are 3806 mV and -51.0 mA
1560      BATT: Compensated VBAT (3681 mV) based remaining capacity is 13.0%
1560      BATT: Average remaining capacity is 12.3%
1810      BATT: Measurements are 3806 mV and -45.0 mA
1810      BATT: Compensated VBAT (3681 mV) based remaining capacity is 13.0%
1810      BATT: Average remaining capacity is 12.5%
1819      INTERNAL ERROR CDisplayManager_imp.c(311): 0x00000000
1819      SEMC DISPBASE Line:5116 OPA_ErrorCode: Unknown ErrorCodeSEMC_TimerProcess: Received signal to exit.
1829      SEMC_TimerProcess_: Send message to self to terminate.
1829      SEMC_TimerProcess_: All claimed resources now freed. Exiting.
1836      [sysctrl] System shut down
1836      AM:MODULE_SHUTDOWN
1837      AM:MODULE_SHUTDOWN_READY
1837      
1838      GVI Heap:ERROR Delete local heap without freeing all memory diff 78 allocations 
1838      
1838      
1838      
1838      MSG: msgmain.c: UNEXPECTED PRIMITIVE 44985 RECEIVED
1839      MSG: msgmain.c: SHUTTING DOWN
1839      MSG: msgmain.c: SHUTDOWN COMPLETE
1839      [sysctrl] Deactivating Network Signalling
1839      SL<-R_REQ_NS_DEACTIVATE in State 0 from 1002e
1839      MMM state 17
1839      MM: IsMM_Connected=0
1839      MM: REG FAILED, Cause = DETACHED
1839      GMM<-GMM_DEACTIVATE_REQ
1839      GMM: TVP_GetTimerIndex no TVP timer
1839      GMM: New TLLI distributed to RR: 0xffffffff (255, 255, 255, 255)
1839      TLLI_PTMSI_New
1839      case1 UnassBoth
1840      GMM: Reset combined procedures
1840      GMM: REG FAILED, Cause = DETACHED
1840      MPH Off
1849      MMM state 0

Последний раз редактировалось Layder; 20.10.2008 в 18:27.

20.10.2008, 16:27

Новое

Viktor001
Сенсей

Сообщений:: 1,761

Регистрация:: 19.10.2005

Возраст:: 57

Рейтинг мнений: 1400

Вес репутации: 375

Viktor001 отключил(а) отображение уровня репутации

Re: K300 не заряжается #2

Менять детальки наугад, очень непроизводительно. Многие из них можно проверить обычным китайским тестером. Резисторы уж всяко проще прозвонить, чем менять.
Попробуй начать с начала.
Часто попадается подгнившие контакты, и от этого повышеное сопротивление в цепи заряда. На подключение зарядного, телефон может реагировать, но зарядка не идёт, или через какоето время прекращается.
Прозвони от контактов зарядки на системном разъме, до конденсатора С2402 на плате. Плюс зарядки на плюс конденсатора должно показывать цепь сопротивлением ноль Ом. И минусовая цепь также.
Прозвони от плюса С2402 до плюса С2620 (он на плате не установлен, только контактные площадки). Это проверяем "стекляшку". При исправной, должно показывать 10-12 Ом.
Включи телефон, и подай от БП на вход зарядки 5 - 5,5 вольт. Если всё исправно, то телефон должен начать заряжаться, а амперметр должен показать ток около 500 мА. Можно поэкспериментировать с напряжением, подать чуть больше.
Если ток зарядки есть, но значительно меньше, возможно неисправна или "левая" АКБ. Проверить её в заведомо исправном телефоне, или подкинуть исправную АКБ.
Или же проблема со средним контактом АКБ в разъёме телефона. Его сначала прозвонить, относительно плюсового и минусового контактов. В обоих случаях, должно показывать примерно как при прозвонке диода.
Если показывает обрыв, в первую очередь посмотреть не оборвана ли пайка самих контактов. Причём, обрыв может появляться, только когда АКБ вставлена и давит на контакты. Далее прозвонить на плюс V2600 (он на плате не установлен). А дальше дорожка идёт внутрь платы и выныривает уже под контролером питания.
Если показывает КЗ или большую утечку на крайние контакты, то может быть убитый контролер питания. Или искать, где прогорела изоляция.
Посмотреть, нет ли окиси вокруг контактов в разъёме. И ещё, чуть выше контактов АКБ, на плате есть три круглых пятака. Обычно они заклеены плёнкой. Там тоже помотреть. Так как цепь контроля высокоомная (десятки килоом), то даже небольшая утечка по окиси, может всё испортить.

Цитата:

Сообщение от Layder

средний контакт батареи идет на контроллер питания. а откуда процессор узнает о типе батареи? смотрел схему, пока ничего не нашел.

Микрухи между собой переговариваются по цифровой шине.

20.10.2008, 20:01

Новое

Layder
Член группы поддержки продукта

Сообщений:: 2,007

Регистрация:: 08.06.2006

Возраст:: 48

Рейтинг мнений: 1112

Вес репутации: 560

Re: K300 не заряжается #3

Viktor001, спасибо за столько широкий ответ, но почти все было просмотрено. средний контакт акб в режиме диода прозванивается, значит сигнал от АКБ до контроллера доходит, а до процессора - нет. а АКБ менялась на другую.
смущает то, что транзистор открывается на заряд, потом телефон ток зарядки меряет и отключает зарядку.

20.10.2008, 20:38

Новое

vth
Неактивный

Сообщений:: 294

Регистрация:: 18.01.2008

Возраст:: 41

Рейтинг мнений: 489

Вес репутации: 0

Re: K300 не заряжается #4

Покажите лог телефона во включенном состоянии, чтобы он говорил о состоянии батареи не два раза, а чуть больше. Там он сообщит о температуре батареи и платы, самое интересное там.
Кроме того "доходит до контроллера и не доходит до процессора" в корне не верно.
Контроллер весьма "умная" микросхема, она общается с батареей, меряет температуру платы, обслуживает ЦАПы/АЦПы и др. пр. Процессор же общается с контроллером по паре цифровых шин.
Так что тут либо всё доходит, либо ничего.
Раньше на к500/к700/к300 любил коротить шлейф камеры на контрольную точку среднего контакта. Но случай вероятно не ваш.
Надо посмотреть температуру.

20.10.2008, 20:49

Пользователь добавил плюс

bond95 (20.10.2008)

Новое

Arni
Сенсей

Сообщений:: 362

Регистрация:: 04.05.2007

Возраст:: 43

Рейтинг мнений: 712

Вес репутации: 398

Re: K300 не заряжается #5

Цитата:

Сообщение от Layder

Вообщем пришел ко мне с перемычками вместо стекляшки на зарядку-интерфейс.
Поставил сразу стекляшку.

А до замены проводка на стекляшку вел себя так же?

20.10.2008, 22:48

Новое

Viktor001
Сенсей

Сообщений:: 1,761

Регистрация:: 19.10.2005

Возраст:: 57

Рейтинг мнений: 1400

Вес репутации: 375

Re: K300 не заряжается #6

Цитата:

Сообщение от Layder

средний контакт акб в режиме диода прозванивается, значит сигнал от АКБ до контроллера доходит, а до процессора - нет. а АКБ менялась на другую.
смущает то, что транзистор открывается на заряд, потом телефон ток зарядки меряет и отключает зарядку.

Транзистор (v2610) не сам по себе открывается. Его открывает контролер питания.
Сам транзистор можно проверить не выпаивая:
АКБ снять. На вход зарядки подать 4 вольта. Мерим на контактах разъёма АКБ. Там не должно быть напряжения, или совсем небольшой потенциал.
Коротим затвор (4 ногу) транзистора на массу. Для чистоты эксперимента, коротить на массу лучше не напрямую, а через резистор, сопротивлением в несколько килоом. На контактах АКБ должно появиться напряжение, которое подано на вход зарядки. Если всё так, то транзистор исправен, и выход КП в порядке (во всяком случае не пробит). Есть ли цепь между затвором транзистора и выходом КП - звоним 4 ногу транзистора, относительно массы, должно вызваниваться как диод. Можно ничего отпаивая (т.к. транзистор с изолированым затвором и на результаты измерения не повлияет), или для полной уверености, можно отпаять только транзистор. Полностью проверить исправность КП - наверное только заменой.
В среднем контакте, который в самом АКБ, никакой логики нет. Туда подключен терморезистор, вторым концом он сидит на минусе. По сопротивлению этого терморезистора, телефон определяет тип АКБ, и его температуру. В BST-35 терморезистор 110 кОм. И проверять нужно с оригинальным АКБ. В китайские могут поставить резистор тот что есть под руками, а не тот что нужен. И телефон вообще может отказаться заряжаться. Но всё равно можно обмануть. Заклеиваешь средний контакт. Телефон будет ругаться "Неизвестный аккумулятор", но заряжать будет. Правда ток зарядки будет ниже, примерно 50 процентов от номинального.
Если у тебя и с заклееным контактом не заряжает. Значит чтото очень не нравится в цепи среднего контакта. Если цепь до КП звонится, и явного коротыша на плюс и минус нет, то остаётся только утечка. Если на плате окислений не видать, отпаяй разъём АКБ, может под ним окисление. Или в самом разъёме пластмаса прогорела.

20.10.2008, 23:05

Пользователь добавил плюс

Новое

Layder
Член группы поддержки продукта

Сообщений:: 2,007

Регистрация:: 08.06.2006

Возраст:: 48

Рейтинг мнений: 1112

Вес репутации: 560

Re: K300 не заряжается #7

Цитата:

Сообщение от Arni

А до замены проводка на стекляшку вел себя так же?

а хез. принесли - не заряжается. а там около стекляшки флюсом корявым все залито и на соплях запаяно было, поэтому сразу и переделывал.

Цитата:

Сообщение от Viktor001

Если у тебя и с заклееным контактом не заряжает. Значит что-то очень не нравится в цепи среднего контакта.

вчера промыл в ванночке, без толку.
обрезал дорожку до разъема батареи около незапаянного варистора - тоже не заряжается.

Цитата:

Сообщение от Viktor001

В BST-35 терморезистор 110 кОм.

батарея оригинал моя б.у., померял резистор - 120кОм

полный лог после еще одной прошивки. к конце - передернул кабель, чтобы инициировать подключенение задяного

Код:

UFxBoot V2.2 (c) SarasSoft 2003. Id: 62 CF 1 10
UFS_USB V2.8 (c) SarasSoft 2007. S/n: 


OS: core startup of System
OS: MM init and instruction cache setup
OS: Installing static device drivers
OS: Starting RTC
OS: current time Thu Jan  1 00:17:20 1970
OS: Starting HEAP
OS: Memscan found Flash @ 0x44000000 Size=0x2000000
OS: Memscan found RAM   @ 0x4c000000 Size=0x800000
OS: Memscan found unknown area @ 0x50000000 Size=0x2000000
OS: Starting FAM
OS: Flash area base:0x44000000 size:0x2000000 driver:cfi params:
OS: Executable flash area base:0x44000000 size:0xf00000
OS: Executable flash area base:0x45000000 size:0x200000
OS: MMU and data cache setup
FS: *** This is SEMC FS ***
FS: Server processes started.
FSFLASH: CPU is ARM 926, revision 3, architecture 6
FSFLASH: Inst Cache size is 16.00 Kb, 4-way, 32 bytes/line.
FSFLASH: Data Cache size is 8.00 Kb, 4-way, 32 bytes/line.
FSFLASH: NOR Flash device @ [0x44000000-0x45FFFFFF] 32768 Kb
FSFLASH: Vendor (0x20): ST
FSFLASH: Device ID: 0x880D
FSFLASH: Write Buffer Size: 64 bytes
FSFLASH: Erase region [0x44000000-0x45FDFFFF] has an erase block size of 128 Kb
FSFLASH: Erase region [0x45FE0000-0x45FFFFFF] has an erase block size of 32 Kb
FSFLASH: Write processes started, pid = 0x10025.
FSFLASH: Erase processes started, pid = 0x10026.
FSFLASH: Logical flash block size is 256 Kb
FSFLASH: File system flash segment 0 located in NOR @ [0x44D00000,0x44EFFFFF] (2048 Kb)
FSFLASH: File system flash segment 1 located in NOR @ [0x45000000,0x45FFFFFF] (16384 Kb)
FSFLASH: Pack Process started, pid = 0x10027.
MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 1024 bytes requested in total ****
FSFLASH: 72 flash block(s) available (out of 72)
FSFLASH: Number of AVAILABLE file system blocks: 18104
FSFLASH: Number of USED file system blocks: 4978
FSFLASH: Number of DIRTY file system blocks: 642
FSFLASH: Number of CLEAN file system blocks: 755
FSFLASH: Number of BAD file system blocks: 0
FS: Mounting file system partition /
FSCK: Phone not properly shut down, running FSCK on partition /
FSCK: FSCK level is 1
MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 2002 bytes requested in total ****
MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 6402 bytes requested in total ****
MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 8404 bytes requested in total ****
MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 9428 bytes requested in total ****
MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 10452 bytes requested in total ****
MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 11604 bytes requested in total ****
FSCK: Checking Inodes Pass 1
FSCK: Directory Check Pass 1
FSCK: Re-creating Free List
MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 12546 bytes requested in total ****
MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 13570 bytes requested in total ****
MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 14594 bytes requested in total ****
MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 15618 bytes requested in total ****
MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 16642 bytes requested in total ****
MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 17666 bytes requested in total ****
MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 18690 bytes requested in total ****
MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 19714 bytes requested in total ****
MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 20738 bytes requested in total ****
MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 22786 bytes requested in total ****
MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 24834 bytes requested in total ****
MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 26882 bytes requested in total ****
MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 28930 bytes requested in total ****
MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 30978 bytes requested in total ****
MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 33026 bytes requested in total ****
MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 35074 bytes requested in total ****
MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 37122 bytes requested in total ****
FSCK: Checking 2200 Inodes Pass 2
FSCK: Directory Check Pass 2
MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 39426 bytes requested in total ****
FSCK: File System Size: 15706
FSCK: Number of Free Data Blocks: 11185
FSCK: Number of Used Data Blocks: 4521
FSCK: Number of Free Inodes: 1723
FSCK: Number of Free Links: 1724
FSCK: Creating RamDir entries.
MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 42242 bytes requested in total ****
MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 51458 bytes requested in total ****
MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 67074 bytes requested in total ****
MALL: **** NEW MAXIMUM XRAM HEAP USAGE: 102402 bytes requested in total ****
FSCK: Done
FS: Mounting file system partition /tpa/system/bg_images/cache
FS: Mounting file system partition /ifs
FSCK: Phone not properly shut down, running FSCK on partition /ifs
FSCK: FSCK level is 1
FSCK: Checking Inodes Pass 1
FSCK: Directory Check Pass 1
FSCK: Re-creating Free List
FSCK: Checking 304 Inodes Pass 2
FSCK: Directory Check Pass 2
FSCK: File System Size: 456
FSCK: Number of Free Data Blocks: 198
FSCK: Number of Used Data Blocks: 258
FSCK: Number of Free Inodes: 136
FSCK: Number of Free Links: 138
FSCK: Creating RamDir entries.
FSCK: Done
FS: Mounting file system partition /system
FSCK: Phone not properly shut down, running FSCK on partition /system
FSCK: FSCK level is 1
FSCK: Checking Inodes Pass 1
FSCK: Directory Check Pass 1
FSCK: Re-creating Free List
FSCK: Checking 200 Inodes Pass 2
FSCK: Directory Check Pass 2
FSCK: File System Size: 470
FSCK: Number of Free Data Blocks: 460
FSCK: Number of Used Data Blocks: 10
FSCK: Number of Free Inodes: 181
FSCK: Number of Free Links: 182
FSCK: Creating RamDir entries.
FSCK: Done
FS: Mounting file system partition /smsdata
BuildInfo: Label: <BAS_CORA_CRH109497_R5N_050524_0831> Variant: <cxc1328697_G200_PHONE_KRISTINA> 
BuildInfo: Generated: 2005-05-24 09:08 by EMLDEHS
Product  : <K300 series> Version: 0001
HW Setup : Marita Compact (Id:0x8000) IRDA: B004 BT: C002 RS232: A004 
Vendor   : <Sony Ericsson> PNP: SER USB: 0FCE BT: 0000 
Prototype start process started!
MPH NullState
RLC: RLC_LLC
RLC: RLC_IDLE_REQ = 7385
RLC: RLC_GMM_DATA_REQ = 7386
RLC: RLC_DATA_REQ = 7387
RLC: RLC_UNITDATA_REQ = 7388
RLC: RLC_RLC_DATA_REQ = 7389
RLC: RLC_RLC_UNITDATA_REQ = 7390
RLC: RLC_DATA_RSP = 7391
RLC: LLC_RLC
RLC: RLC_DATA_CNF = 7395
RLC: RLC_DATA_IND = 7396
RLC: RLC_STATUS_IND = 7397
RLC: RR_RLC
RLC: RR_TBF_ESTABLISH_REQ = 6910
RLC: RR_UPLINK_TBF_RELEASE_REQ = 6912
RLC: RR_DOWNLINK_TBF_RELEASE_REQ = 6913
RLC: RR_TBF_RELEASE_RSP = 6914
RLC: RR_DOWNLINK_ACK_NACK_REQ = 6915
RLC: RLC_RR
RLC: RR_TBF_ESTABLISH_CNF = 6920
RLC: RR_UPLINK_TBF_RELEASE_CNF = 6922
RLC: RR_DOWNLINK_TBF_RELEASE_CNF = 6923
RLC: RR_TBF_ESTABLISH_IND = 6921
RLC: RR_TBF_RELEASE_IND = 6924
RLC: RR_UPLINK_ACK_NACK_IND = 6925
RLC: PH_RLC
RLC: PH_RLC_DATA_REQ = 7250
RLC: PH_RLC_DATA_RELEASE_REQ = 7252
RLC: PH_RLC_CONTROL_REQ = 7253
RLC: PH_RLC_CONTROL_CONTROL_0_PDCH_REQ = 7255
RLC: PH_RLC_CONTROL_CONTROL_1_PDCH_REQ = 7256
RLC: PH_RLC_CONTROL_CONTROL_2_PDCH_REQ = 7257
RLC: PH_RLC_CONTROL_CONTROL_3_PDCH_REQ = 7258
RLC: PH_RLC_CONTROL_CONTROL_4_PDCH_REQ = 7259
RLC: PH_RLC_CONTROL_CONTROL_5_PDCH_REQ = 7260
RLC: PH_RLC_CONTROL_DATA_0_PDCH_REQ = 7261
RLC: PH_RLC_CONTROL_DATA_1_PDCH_REQ = 7262
RLC: PH_RLC_CONTROL_DATA_2_PDCH_REQ = 7263
RLC: PH_RLC_CONTROL_DATA_3_PDCH_REQ = 7264
RLC: PH_RLC_CONTROL_DATA_4_PDCH_REQ = 7265
RLC: PH_RLC_CONTROL_DATA_5_PDCH_REQ = 7266
RLC: PH_RLC_CONTROL_CONTROL_0_PDTCH_PDCH_REQ = 7267
RLC: PH_RLC_CONTROL_CONTROL_1_PDTCH_PDCH_REQ = 7268
RLC: PH_RLC_CONTROL_CONTROL_2_PDTCH_PDCH_REQ = 7269
RLC: PH_RLC_CONTROL_CONTROL_3_PDTCH_PDCH_REQ = 7270
RLC: PH_RLC_CONTROL_CONTROL_4_PDTCH_PDCH_REQ = 7271
RLC: PH_RLC_CONTROL_CONTROL_5_PDTCH_PDCH_REQ = 7272
RLC: PH_RLC_CONTROL_DATA_0_PDTCH_PDCH_REQ = 7273
RLC: PH_RLC_CONTROL_DATA_1_PDTCH_PDCH_REQ = 7274
RLC: PH_RLC_CONTROL_DATA_2_PDTCH_PDCH_REQ = 7275
RLC: PH_RLC_CONTROL_DATA_3_PDTCH_PDCH_REQ = 7276
RLC: PH_RLC_CONTROL_DATA_4_PDTCH_PDCH_REQ = 7277
RLC: PH_RLC_CONTROL_DATA_5_PDTCH_PDCH_REQ = 7278
RLC: PH_RLC_RELEASE_REQ = 7279
RLC: RLC_PH
RLC: PH_RLC_DATA_CNF = 7290
RLC: PH_RLC_DATA_IND = 7291
RLC: PH_RLC_DATA_RTS_IND = 7292
RLC: PH_RLC_DATA_RELEASE_CNF = 7293
RLC: PH_RLC_CONNECT_IND = 7294
RLC: PH_RLC_CONTROL_CNF = 7295
RLC: PH_RLC_CONTROL_IND = 7296
RLC: PH_RLC_RELEASE_CNF = 7297
RLC: RLC_TIMER
RLC: RLC_TIMER_T3164 = 7465
RLC: RLC_TIMER_T3166 = 7466
RLC: RLC_TIMER_T3180 = 7467
RLC: RLC_TIMER_T3182 = 7468
RLC: RLC_TIMER_T3190 = 7469
RLC: RLC_TIMER_T3192 = 7472
RLC_UL: S I
RR: PID 65596
RR: TIMER_PRIM 7582 
RR: MPH_RR_PRIM 6720 
RR: RR_MPH_PRIM 6770 
RR: RR_RLC_PRIM 6910 
RR: RLC_RR_PRIM 6920 
RR: PH_MPH_PRIM 7010 
RR: MPH_PH_PRIM 7080 
RR: PH_RLC_PRIM 7250 
RR: RLC_PH_PRIM 7290 
LLC: PID 65600
LLC: <SMS 3822
LLC: >SMS 3833
LLC: <SNDCP 7340 7348
LLC 1: state 0
LLC 3: state 0
LLC 5: state 0
LLC 7: state 0
LLC 9: state 0
LLC 11: state 0
RLC_DL: S ILLDebug_Init: LLDEBUG cable detected
ACB/Debug driver: LLDEBUG cable detected
ACB/Debug driver: Error PD_GPIO_InterruptUnsubscribe failed
### Print Server: Requesting DebugMux channel...
535       ### Print Server: Started OK
537       Prototype Start Process [File System Version Control]: Type OK (Kristina)
[537       Prototype Start Process [File System Version Control]: Version OK (P5T)
R538       RLink: RLINK_PH
538       RLink: PH_RLINK_CONNECT_IND = 6672
538       RLink: PH_RLINK_DISCONNECT_IND = 6673
538       RLink: PH_RLINK_RTS_IND = 6670
538       RLink: PH_RLINK_DATA_IND = 6671
538       
RLC: PH_RLINK
538       RLink: PH_RLINK_DATA_REQ = 6660
538       
RLink: RLINK_RLP
538       RLink: RLINK_RLP_RTS_IND = 4990
538       RLink: RLINK_RLP_DATA_IND = 4994
538       
RLC: RLP_RLINK
538       RLink: RLINK_RLP_DATA_REQ = 4995
538       RLink: RLINK_RLP_DTX_REQ = 4996
538       
RLC: RLINK_RR
538       RLC: RR_CHANNEL_MODE_INFO_IND = 42861
538       RLC: RR_CHANNEL_MODE_MODIFY_IND = 42862
539       RLink: State Idlesysctrl] Initializing Interactive Debug support.
539       RH: Activate on LRRAT = 0
539       RH state: Inactiveational Rose RealTime C Target Run Time System
539       Release 6.50.C.00 (-Cl,G0,-L,+Me,-O)
539       Copyright (c) 1993-2003 Rational Software
541       SM: Initiated; ProcessID = 65652 !MM: reset TMSI
541       MM: No valid GSM keys
542       MM: No valid WCDMA keys
542       MM: TVP Probe P_UAS_CAS_MM_Status Error
542       MM: state 0
542       MM: TVP Probe P_UAS_CAS_MM_Status ErrorGMM: ResetSIM_Data
543       GMM: No valid GSM-GPRS keys
543       GMM: No valid WCDMA keys
543       LLC 1: Unexpected signal #7417* CC1 state 0
544       * CC2 state 0
544       * CC3 state 0
544       * CC4 state 0
544       * CC5 state 0
544       DRM: DRM_Process started
544       * CC7 state 0
544       * CC6 state 0
553       Assert Failure in .\cxc1328697_G200_PHONE_KRISTINA\IAR-ARM7\inc\dispdrv_phys_pdi.c(980)
554       SS: State Idle @
554       CallMeter started
555       SMC_MO_1 (65627) state 4
555       SMC_MO_2 (65628) state 4
555       SMC_MT (65629) state 4
555       SMR_MO state 3
555       SMR_MT state 3
555       GDFS_SRV State 1-ClosedAM: MODULE_INIT
558       [sysctrl] Enabling UICC refresh task.
558       R2BA010     prgCXC125978_EU_1_KR
558       [SIM] State Changed: SIM_STATE_NULL, Appl: 0, Ref: 0
566       GDFS: Format version 1
566       GDFS Log[0] <- Phys[0] 120122 bytes left. Erased     1 times
567       GDFS Log[1] <- Phys[1]  98729 bytes left. Erased     1 times
568       GDFS Log[2] <- Phys[2] 112637 bytes left. Erased     1 times
569       GDFS Log[3] <- Phys[3] 120021 bytes left. Erased     1 times
569       GDFS Log[4] <- Phys[4] 123990 bytes left. Erased     1 times
569       GDFS Log[5] <- Phys[5] 125615 bytes left. Erased     1 times
569       GDFS Log[6] <- Phys[6] 131060 bytes left. Erased     1 times
572       GDFS_SRV State 2-Opening
573       CC: speech ver config 2 0 1 15 15
573       CC: TTY mode = 0
573       * CC0 state 0
574       MPH: PacketChannels activated 
574       RR Multislot class GPRS = 8
574       RR state 0
574       MS_TYPE = MS_EGSM900_DCS1800_PCS1900
574       MPH:SelectedModeIndex=1
574       MPH_GD_Info.SensitivityLimit_dBm[BAND_GSM900_OR_EGSM900] = -107
575       ETX OK
575       MPH_GD_Info.SensitivityLimit_dBm[BAND_DCS1800] = -107
576       MPH_GD_Info.SensitivityLimit_dBm[BAND_PCS1900] = -107
576       MPH_GD_Info.SensitivityLimit_dBm[BAND_GSM850] = -107
576       MPH_GD_Info.MinNrOfIdentifiedCellsToSkipWeakCells = 0
579       MMM IMEI = 359986-00-822369-0, IMEI_SVN = 22
579       MMM EqPLMN List read from GDFS, nbr=1, 250 2 
579       MMM: TVP Probe P_UAS_CAS_PLMN_List Error
579       MMM state 0
579       MMM MM_SIM_DATA_SET_REQ
581       DebugMux[IMEI] Length=8, TypeOfID=2, OddEven=1, Digits: 3 5 9 9 8 6 0 0 8
584       [lockctrl] SimLock : NOT OK, PhoneLock : NOT OK, Sim Active : NOT ACTIVE
585       IrDA_lap_rec.c: IrLAP process ready ! 
587       IrDA_lmp_rec.c: IrLMP process ready ! 
587       MMM MS_OperationMode=0
587       CCS: Idle
587       SL: SIGID_INTERVAL_START_MOD_NS_CAS = 3660
588       SL: ProcessID = 10055
588       SL: CFG_DISABLE_SECURITY_HANDLING is NOT! defined
588       SL: DUAL_RAT_SUPPORT is NOT! defined
588       SL state 0
588       SL<-EVENT_SIM_STATE_CHANGED in State 0 from 100ac
588       SL: Not active
588       SL new SIM handle=0
588       Load Module Starter: Hunt for Program Manager failedACM: Starting Application Side.
590       [sysctrl] start-up cause : Accessory
590       [SIM_FILE_UTIL] FCP Cache Size 80
590       SL<-R_REQ_NS_ACTIVATE in State 0 from 1002e
590       MM: state 12
590       MM: TVP Probe P_UAS_CAS_MM_Status Error
591       MMM RH_ACTIVATE_REQ, PLMN = 250 2, SwitchRAT=0
591       RR mph_act_req, 250, 2 
591       MPH: EGSM900_DCS1800
591       RR state 1
591       RLC_UL: S S C Lost
591       RH state: GSM Active
591       MMM state 12
591       GMM<-GMM_ATTACH_REQ[sysctrl] System mode changed from SHUTDOWN/INITIATING to WAITING_FOR_UNLOCK
592       [sysctrl] System Start-Up is suspended until SIM locks or SIM is activated
592       [lockctrl] SimLock : NOT OK, PhoneLock : NOT OK, Sim Active : NOT ACTIVE
592       [lockctrl] SimLock : OK, PhoneLock : NOT OK, Sim Active : NOT ACTIVE
592       [lockctrl] SimLock : OK, PhoneLock : OK, Sim Active : NOT ACTIVE
592       [sysctrl] Normal Voltage ind. received from SysPwr
592       SL state 1
592       SL<-MMM_RAT_CHANGE_IND in State 1 from 1004a
592       SL: new RAT = 0
592       SL<-EVENT_SYSCTRL_LOCKCONTROL in State 1 from 1002e
593       MPH CellSelection
593       MPH Take new rxlev measurements
593       RLP: process started
593       L2RCOP: process started
593       RLP: state changed to 'S0_ADMandDetached'
593       L2RCOP: state changed to 'Initial'
597       AT process: Awake and AT your service!
603       ###Downloading DSP for first time after startup of phone!###
605       DSPIF_INT Exception: MPORTIF Soft reset
605       DSPIF_INT Exception: MPORTIF Soft reset
605       [ICC] Reader Voltage:OFF
605       [SIM-RDR] Fi: 1 Di: 1 Div1: 0 Div2: 0
606       [ICC] Reader Voltage:1V8ACM.StartMain: Starting First App. id=1...
610       ACM.StartMain: Start of First App ok.
611       AM: MODULE_INIT_READY
611       
611       
614       GVI:ReadyDSPIF_INT Exception: MPORTIF Soft reset
614       DSPIF_INT Exception: MPORTIF Soft reset
611       ******************************************
616       * Sony Ericsson Mobile Communications AB *
616       * Copyright 2003                         *
616       ******************************************
616       * R2BA010     prgCXC125978_EU_1_KR         *
616       ******************************************
616       
616       
616       AAM: Start initializing persistent data.
617       (OBEX/obex_session.c line: 2224) OBEX Started.
617       RTP_Ctrl started
618       ## DSP VersionIdentity: "Marita Compact DSP midi_pcm_asr CNH1600219_R2L002______ 18Feb2005_13:44:18"
628       [ICC] Reader Voltage:OFF
640       [SIM-RDR] Fi: 1 Di: 1 Div1: 0 Div2: 0
640       [ICC] Reader Voltage:3V
662       [ICC] Reader Voltage:OFF
662       [SIM] WARNING - Destruction of Application Parameters
662       [SIM_FILE_UTIL] Used Cache Records 0
662       [SIM_FILE_UTIL] Max Cache Records  80
662       [SIM] WARNING - Destruction of Card Parameters
662       [SIM] State Changed: SIM_STATE_POWER_OFF, Appl: 0, Ref: 0
662       [lockctrl] SimLock : OK, PhoneLock : OK, Sim Active : NOT ACTIVE
663       SL<-EVENT_SIM_STATE_CHANGED in State 1 from 100ac
663       SL new SIM handle=0AAM: Done initializing persistent data.
732       MMPROT[RTSP]: RTSP Process Started
749       
751       MSG: msgmain.c: State 255
751       CBS: cbs_main.c: EVENT_SYSCTRL_LOCKCONTROL rejectedOS: Starting ose_memory_mgr
751       OS: core startup complete!
756       GDFS_Wrapper: **** Up and running ****
756       
756       MAPP: OSC accessoryGDFS_Wrapper: GDFSW_RestoreFromFile called.
777       GDFS_WR State 1-Closed
778       GDFS_WR Start check
778       BATT: Battery type is UNKNOWN
783       BATT: Measurements are 2798 mV and -150.0 mA
783       BATT: Compensated VBAT (2882 mV) based remaining capacity is 0.0%
805       TIME LD:ld_time.c Init of RTC failed
806       DRM Init OK
806       DRM_PRS_Process started
1016      GDFS Free Blk 7 Ok
1016      GDFS_WR Check done
1016      GDFS_SRV State 3-Open
1016      GDFS_WR State 2-Open
1024      GDFS_SRV Queue full
1039      GDFS_SRV Queue emptyGDFS_Wrapper: GDFSW_RestoreFromFile finished:ERRORS were found!!!
1071      GDFS_SRV Queue full
1078      MPH: Switch to other mobile mode
1087      HPB: PB_INIT Waiting For Activation
1103      Watchdog: process up and running.
1103      Watchdog: Crash SMS not activated
1105      ***** Investigating Language Availability *****
1110      EST: FS =     Available, ROM =   Unavailable
1111      ENG: FS =   Unavailable, ROM =     Available
1111      LAT: FS =     Available, ROM =   Unavailable
1111      LIT: FS =     Available, ROM =   Unavailable
1111      POL: FS =     Available, ROM =   Unavailable
1111      RUS: FS =     Available, ROM =   Unavailable
1111      UKR: FS =     Available, ROM =   Unavailable
1111      ***********************************************
1112      Disp_CreateFont: Creating font 0
1112      Disp_CreateFont: Creating font 1
1113      AUC_INFO: AC_SetAcousticProperties, /ifs/settings/acoustic/farfield_play.apf
1115      Disp_CreateFont: Creating font 2
1116      Disp_CreateFont: Creating font 10
1117      Disp_CreateFont: Creating font 11
1118      Disp_CreateFont: Creating font 12
1119      Disp_CreateFont: Creating font 13
1119      Disp_CreateFont: Creating font 15
1119      *** Disp_SetDefaultGlyph: Font 15 failed to set default glyph!
1119      SEMC DISPUTIL Line:1953 OPA_ErrorCode: Unknown ErrorCode
1119      Disp_CreateFont: Creating font 16
1120      Disp_CreateFont: Creating font 17
1120      Disp_CreateFont: Creating font 18
1120      Disp_CreateFont: Creating font 20
1121      Disp_CreateFont: Creating font 31
1121      Disp_CreateFont: Creating font 32
1121      Disp_CreateFont: Creating font 33
1121      Disp_CreateFont: Creating font 34
1122      Disp_CreateFont: Creating font 47
1122      Disp_CreateFont: Creating font 55
1122      Disp_CreateFont: Creating font 54
1128      ***** Investigating Input Features *****
1128      Arabic:    NO
1128      China:     NO
1128      Hebrew:    NO
1128      T9:        YES
1128      Greek:     NO
1128      Cyrillic:  NO
1128      Thai:      NO
1128      Icelandic: NO
1128      Ukrainian: NO
1128      Hindi:     NO
1128      Bengali:   NO
1128      ****************************************
1128      ***** Investigating Input Language Availability *****
1129      Predictive state is: ON
1129      Predictive default (cust) is: ON
1129      ENG: allowed = YES, T9-FS =  NO, T9-ROM = YES
1129      POL: allowed = YES, T9-FS = YES, T9-ROM =  NO
1129      RUS: allowed = YES, T9-FS = YES, T9-ROM =  NO
1130      USE: allowed = YES, T9-FS =  NO, T9-ROM = YES
1130      UKR: allowed = YES, T9-FS =  NO, T9-ROM =  NO
1130      ABC: allowed = YES, T9-FS =  NO, T9-ROM =  NO
1130      123: allowed = YES, T9-FS =  NO, T9-ROM =  NO
1130      *** (T9) ENG matches USE
1131      *** Resolve ok (1), keeping ENG 
1131      *****************************************************
1138      [StandbyBook:53] Created
1143      HPB: PB process started
1146      SL<-REQUEST_VOICECALLVOLUME_SET in State 1 from 100cf
1154      SL<-REQUEST_CURRENTPLMN_STATUS_GET in State 1 from 100df
1159      CMZ Log: 
=== Startup with CMZ_Mode_Init ======
1232      ATCS: ATCS Up and running.  Waiting for Accessory to be connected
1245      MPH: PCS1900
1246      MPH Take new rxlev measurements
1257      CMZ Log: 
DDM started in mode 0xf2:
1264      CMZ Content Revision: R2BA010
1265      [StandbyBook:53] Goto StandbyBook_StandbyPage
1265      [InitBook:54] Created
1265      [InitBook:54] Goto InitBook_StartUp_Page
1265      [InitBook:54] Got focus
1266      ***** Auto language at startup, getting preferred value (4)
1268      [InitBook:54] Goto InitBook_Customization_Page
1341      
1341      WAP:Start (process id 0x10089)
1341      WAP: File API Initiated
1342      WAP: created task 0
1343      WAP: fileMkDir(.../stk)
1344      WAP: fileMkDir(.../stk/tmp)
1346      WAP: created task 1
1351      OAS: 0 Profile Roles active
1351       changed to state 0
1351      PBS Process started
1352      
1352      PBS: Dispatch PHB_NO_ACCESS
1367      HPB: PB_INIT Activated
1368      HPB: InitContactPbag
1369      HPB: InitGroupPbag
1418      GDFS_SRV Queue empty
1488      MSG: msgmain.c: State 0 changed to state 1
1488      MSG: msgmain.c: EVENT_SIM_STATE_CHANGED accepted
1488      MSG: msgmain.c: SIM_STATE NOT Active
1488      MSG: msgmain.c: EVENT_SIM_STATE_CHANGED accepted
1488      MSG: msgmain.c: SIM_STATE NOT Active
1506      MPH: Switch to other mobile mode
1515      MPH: EGSM900_DCS1800
1765      MPH Take new rxlev measurements
1979      Handle_Shell_Timeout: Time-out from non-existent timer: 4c715cdc - Ignored.
1979      Handle_Shell_Timeout: Time-out from non-existent timer: 4c715cdc - Ignored.
1979      Handle_Shell_Timeout: Time-out from non-existent timer: 4c715cdc - Ignored.
1980      Handle_Shell_Timeout: Time-out from non-existent timer: 4c715cdc - Ignored.
1981      Handle_Shell_Timeout: Time-out from non-existent timer: 4c715cdc - Ignored.
1984      Handle_Shell_Timeout: Time-out from non-existent timer: 4c715cdc - Ignored.
1993      Handle_Shell_Timeout: Time-out from non-existent timer: 4c715cdc - Ignored.
2119      Handle_Shell_Timeout: Time-out from non-existent timer: 4c715cdc - Ignored.
2120      Handle_Shell_Timeout: Time-out from non-existent timer: 4c715cdc - Ignored.
2120      Handle_Shell_Timeout: Time-out from non-existent timer: 4c715cdc - Ignored.
2122      Handle_Shell_Timeout: Time-out from non-existent timer: 4c715cdc - Ignored.
2123      Handle_Shell_Timeout: Time-out from non-existent timer: 4c715cdc - Ignored.
2249      MPH: Switch to other mobile mode
2258      MPH: PCS1900
2258      MPH Take new rxlev measurements
2518      MPH: Switch to other mobile mode
2527      MPH: EGSM900_DCS1800
2728      Handle_Shell_Timeout: Time-out from non-existent timer: 4c715cdc - Ignored.
2777      MPH Take new rxlev measurements
3260      MPH: Switch to other mobile mode
3270      MPH: PCS1900
3270      MPH Take new rxlev measurements
3530      MPH: Switch to other mobile mode
3539      MPH: EGSM900_DCS1800
3789      MPH Take new rxlev measurements
4272      MPH: Switch to other mobile mode
4282      MPH: PCS1900
4282      MPH Take new rxlev measurements
4541      MPH: Switch to other mobile mode
4551      MPH: EGSM900_DCS1800
4801      MPH Take new rxlev measurements
5284      MPH: Switch to other mobile mode
5293      MPH: PCS1900
5293      MPH Take new rxlev measurements
5552      MPH: Switch to other mobile mode
5561      MPH: EGSM900_DCS1800
5811      MPH Take new rxlev measurements
5843      [sysctrl] Normal Voltage ind. received from SysPwr
6295      MPH: Switch to other mobile mode
6304      MPH: PCS1900
6304      MPH Take new rxlev measurements
6564      MPH: Switch to other mobile mode
6567      GDFS_SRV Queue full
6573      MPH: EGSM900_DCS1800
6617      GDFS_SRV NoWrites 500 Max Queue 2635
6641      GDFS_SRV Queue empty
6772      SL<-REQUEST_PREFERREDMO_SMS_DOMAIN_SET in State 1 from 100cd
6772      SL<-REQUEST_MS_OPERATIONMODE_SET in State 1 from 100cd
6772      SL<-REQUEST_SEARCHMODE_SET in State 1 from 100cd
6824      MPH Take new rxlev measurements
7062      FSFLASH: Formatting flash block 25
7308      MPH: Switch to other mobile mode
7317      MPH: PCS1900
7317      MPH Take new rxlev measurements
7576      MPH: Switch to other mobile mode
7585      MPH: EGSM900_DCS1800
7835      MPH Take new rxlev measurements
8206      FSFLASH: Formatting flash block 26
8251      CBS: cbs_main.c: CBS_ALIVE_TIMER_IND accepted
8319      MPH: Switch to other mobile mode
8328      MPH: PCS1900
8328      MPH Take new rxlev measurements
8538      BATT: Measurements are 3744 mV and -49.7 mA
8538      BATT: Compensated VBAT (3805 mV) based remaining capacity is 49.1%
8538      BATT: Average remaining capacity is 49.1%
8588      MPH: Switch to other mobile mode
8597      MPH: EGSM900_DCS1800
8847      MPH Take new rxlev measurements
9286      Themes_bk.c Themes_SetDefaultTheme() - Setting new theme file: Lunarspots.thm
9294      Themes_bk.c Themes_SetDefaultTheme() - Success to create link
9314      CMZ Log: Ready
9320      CMZ Log: 
CMZ started in mode 0xe1:
9331      MPH: Switch to other mobile mode
9333      CMZ CDA Revision: R2A
9340      MPH: PCS1900
9340      MPH Take new rxlev measurements
9363      FSFLASH: Formatting flash block 27
9600      MPH: Switch to other mobile mode
9609      MPH: EGSM900_DCS1800
9859      MPH Take new rxlev measurements
10343     MPH: Switch to other mobile mode
10352     MPH: PCS1900
10352     MPH Take new rxlev measurements
10409     CMZ Log: Ready
10416     CMZ Log: 
10423     CMZ Log: Success - 0 error(s), 0 warning(s)
10439     FS: 1 commit-at-close files open, can't sync the file system.
10459     FSFLASH: Formatting flash block 28
10612     MPH: Switch to other mobile mode
10621     MPH: EGSM900_DCS1800
10871     MPH Take new rxlev measurements
11045     ***** Auto language at startup, getting preferred value (4)
11052     Tararchive.c TARArchiveOpenFile(): Failed to open file
11052     Tararchive.c 
11052     /tpa/preset/custom/DESKTOP_HOOK_1.itm
11053     errno 202
11071     Tararchive.c TARArchiveOpenFile(): Failed to open file
11071     Tararchive.c 
11071     /tpa/preset/custom/DESKTOP_HOOK_3.itm
11072     errno 202
11074     Tararchive.c TARArchiveOpenFile(): Failed to open file
11074     Tararchive.c 
11074     /tpa/preset/custom/NOT_YET_DECIDED.itm
11075     errno 202
11077     Tararchive.c TARArchiveOpenFile(): Failed to open file
11077     Tararchive.c 
11077     /tpa/preset/custom/NOT_YET_DECIDED.itm
11078     errno 202
11082     Tararchive.c TARArchiveOpenFile(): Failed to open file
11082     Tararchive.c 
11082     /tpa/preset/custom/VOICE_NOTE_HOOK.itm
11083     errno 202
11085     Tararchive.c TARArchiveOpenFile(): Failed to open file
11085     Tararchive.c 
11085     /tpa/preset/custom/WIRELESS_VILLAGE_HOOK.itm
11086     errno 202
11088     Tararchive.c TARArchiveOpenFile(): Failed to open file
11088     Tararchive.c 
11088     /tpa/preset/custom/CALL_LIST_HOOK.itm
11090     errno 202
11092     Tararchive.c TARArchiveOpenFile(): Failed to open file
11092     Tararchive.c 
11092     /tpa/preset/custom/GAMES_HOOK_1.itm
11093     errno 202
11095     Tararchive.c TARArchiveOpenFile(): Failed to open file
11095     Tararchive.c 
11095     /tpa/preset/custom/GAMES_HOOK_2.itm
11096     errno 202
11105     Timer unx. msg [28673,6] from 98506
11168     Tararchive.c TARArchiveOpenFile(): Failed to open file
11168     Tararchive.c 
11168     /tpa/preset/custom/FM_PICTURES_HOOK_1.itm
11170     errno 202
11171     Tararchive.c TARArchiveOpenFile(): Failed to open file
11171     Tararchive.c 
11171     /tpa/preset/custom/FM_PICTURES_HOOK_2.itm
11173     errno 202
11209     Tararchive.c TARArchiveOpenFile(): Failed to open file
11209     Tararchive.c 
11209     /tpa/preset/custom/SETT_RINGTONE_HOOK_1.itm
11211     errno 202
11212     Tararchive.c TARArchiveOpenFile(): Failed to open file
11212     Tararchive.c 
11212     /tpa/preset/custom/SETT_RINGTONE_HOOK_2.itm
11214     errno 202
11246     Tararchive.c TARArchiveOpenFile(): Failed to open file
11246     Tararchive.c 
11246     /tpa/preset/custom/FM_SOUNDS_HOOK_1.itm
11248     errno 202
11249     Tararchive.c TARArchiveOpenFile(): Failed to open file
11249     Tararchive.c 
11249     /tpa/preset/custom/FM_SOUNDS_HOOK_2.itm
11251     errno 202
11285     Tararchive.c TARArchiveOpenFile(): Failed to open file
11285     Tararchive.c 
11285     /tpa/preset/custom/FM_VIDEOS_HOOK_1.itm
11287     errno 202
11288     Tararchive.c TARArchiveOpenFile(): Failed to open file
11288     Tararchive.c 
11289     /tpa/preset/custom/FM_VIDEOS_HOOK_2.itm
11290     errno 202
11321     Tararchive.c TARArchiveOpenFile(): Failed to open file
11321     Tararchive.c 
11321     /tpa/preset/custom/FM_THEMES_HOOK_1.itm
11322     errno 202
11324     Tararchive.c TARArchiveOpenFile(): Failed to open file
11324     Tararchive.c 
11324     /tpa/preset/custom/FM_THEMES_HOOK_2.itm
11325     errno 202
11355     MPH: Switch to other mobile mode
11359     Tararchive.c TARArchiveOpenFile(): Failed to open file
11359     Tararchive.c 
11359     /tpa/preset/custom/MESSAGES_HOOK_1.itm
11360     errno 202
11362     Tararchive.c TARArchiveOpenFile(): Failed to open file
11362     Tararchive.c 
11362     /tpa/preset/custom/MESSAGES_HOOK_2.itm
11363     errno 202
11364     MPH: PCS1900
11364     MPH Take new rxlev measurements
11366     Tararchive.c TARArchiveOpenFile(): Failed to open file
11366     Tararchive.c 
11366     /tpa/preset/custom/HOME_SCREEN_HOOK_1.itm
11367     errno 202
11369     Tararchive.c TARArchiveOpenFile(): Failed to open file
11369     Tararchive.c 
11369     /tpa/preset/custom/HOME_SCREEN_HOOK_2.itm
11371     errno 202
11373     Tararchive.c TARArchiveOpenFile(): Failed to open file
11373     Tararchive.c 
11373     /tpa/preset/custom/HOME_SCREEN_HOOK_3.itm
11374     errno 202
11376     Tararchive.c TARArchiveOpenFile(): Failed to open file
11376     Tararchive.c 
11376     /tpa/preset/custom/HOME_SCREEN_HOOK_4.itm
11376     errno 202
11379     Tararchive.c TARArchiveOpenFile(): Failed to open file
11379     Tararchive.c 
11379     /tpa/preset/custom/HOME_SCREEN_HOOK_5.itm
11380     errno 202
11382     Tararchive.c TARArchiveOpenFile(): Failed to open file
11383     Tararchive.c 
11383     /tpa/preset/custom/HOME_SCREEN_CONTENT_HOOK.itm
11383     errno 202
11386     Tararchive.c TARArchiveOpenFile(): Failed to open file
11386     Tararchive.c 
11386     /tpa/preset/custom/SETT_WALLPAPER_HOOK_1.itm
11387     errno 202
11389     Tararchive.c TARArchiveOpenFile(): Failed to open file
11389     Tararchive.c 
11390     /tpa/preset/custom/SETT_WALLPAPER_HOOK_2.itm
11390     errno 202
11394     Tararchive.c TARArchiveOpenFile(): Failed to open file
11394     Tararchive.c 
11394     /tpa/preset/custom/SETT_STARTSHOW_HOOK_1.itm
11396     errno 202
11397     Tararchive.c TARArchiveOpenFile(): Failed to open file
11398     Tararchive.c 
11398     /tpa/preset/custom/SETT_STARTSHOW_HOOK_2.itm
11399     errno 202
11402     Tararchive.c TARArchiveOpenFile(): Failed to open file
11402     Tararchive.c 
11402     /tpa/preset/custom/SETT_SCREENSAVER_HOOK_1.itm
11404     errno 202
11406     Tararchive.c TARArchiveOpenFile(): Failed to open file
11406     Tararchive.c 
11406     /tpa/preset/custom/SETT_SCREENSAVER_HOOK_2.itm
11408     errno 202
11411     Tararchive.c TARArchiveOpenFile(): Failed to open file
11411     Tararchive.c 
11411     /tpa/preset/custom/ORG_APPLICATIONS_HOOK_1.itm
11413     errno 202
11414     Tararchive.c TARArchiveOpenFile(): Failed to open file
11414     Tararchive.c 
11414     /tpa/preset/custom/ORG_APPLICATIONS_HOOK_2.itm
11416     errno 202
11419     Tararchive.c TARArchiveOpenFile(): Failed to open file
11419     Tararchive.c 
11419     /tpa/preset/custom/MEDIA_PLAYER_HOOK_1.itm
11421     errno 202
11422     Tararchive.c TARArchiveOpenFile(): Failed to open file
11423     Tararchive.c 
11423     /tpa/preset/custom/MEDIA_PLAYER_HOOK_2.itm
11424     errno 202
11427     Tararchive.c TARArchiveOpenFile(): Failed to open file
11427     Tararchive.c 
11428     /tpa/preset/custom/ENTERTAINMENT_HOOK_1.itm
11429     errno 202
11431     Tararchive.c TARArchiveOpenFile(): Failed to open file
11431     Tararchive.c 
11431     /tpa/preset/custom/ENTERTAINMENT_HOOK_2.itm
11432     errno 202
11434     Tararchive.c TARArchiveOpenFile(): Failed to open file
11434     Tararchive.c 
11434     /tpa/preset/custom/ENTERTAINMENT_HOOK_3.itm
11436     errno 202
11468     Tararchive.c TARArchiveOpenFile(): Failed to open file
11468     Tararchive.c 
11468     /tpa/preset/custom/RIGHT_SOFTKEY_HOOK.itm
11470     errno 202
11471     Tararchive.c TARArchiveOpenFile(): Failed to open file
11471     Tararchive.c 
11472     /tpa/preset/custom/OPERATOR_KEY_HOOK.itm
11473     errno 202
11485     [InitBook:54] Goto InitBook_StartUp_Page
11489     [CallManagerBook:55] Created
11491     [CallManagerBook:55] Goto Manager_Idle_Page
11492     [InitBook:54] Goto InitBook_Started_Page
11492     [SIMCardAuthentication_Book:56] Created
11493     [SIMCardAuthentication_Book:56] Goto SimAuth_InsertSIM_Page
11493     [SimError_Book:57] Created
11493     [InitBook:54] Lost focus
11493     [SimError_Book:57] Got focus
11493     [SimError_Book:57] Goto SimError_ShowMessage_Page
11553     AUC: Open Audio: ID: 1. Frequency: 3. Prio: 1 Channels: [0,1,0,1]
11553     AUC: Open Audio: Open Channels 1, Freq: 3
11558     DSPIF_INT Exception: MPORTIF Soft reset
11558     DSPIF_INT Exception: MPORTIF Soft reset
11560     DSPIF_INT Exception: MPORTIF Soft reset
11560     DSPIF_INT Exception: MPORTIF Soft reset
11568     DSPIF_INT Exception: MPORTIF Soft reset
11568     DSPIF_INT Exception: MPORTIF Soft reset
11572     ## DSP VersionIdentity: "Marita Compact DSP midi_pcm_asr CNH1600219_R2L002______ 18Feb2005_13:44:18"
11587     *** CreateTextFeedback is obsolete. ***
File: .\cxc125978_EU_1_KR\IAR-ARM7\src\simerror_bk.c
11588     SL<-REQUEST_TTY_MODE_SET in State 1 from 100d4
11588     SL: SIM not ok yet
11589     ***** Calling IAC_ServerASC_SetVolume *****
11589     ***** RingVolume = 5 ****
11589     ***** SUCCESS *****
11620     [StandbyBook:53] Goto StandbyBook_StandbyPage
11621     
11621     SL<-REQUEST_RXSIGNALPARAMS_GET in State 1 from 100d0
11622     INTERNAL ERROR CNetworkManager_imp.c(1249): 0x00000007
11624     MPH: Switch to other mobile mode
11633     MPH: EGSM900_DCS1800
11747     AUC: Close Audio: ID: 1. Frequency: 3. Channels: [0,1,0,1]. SendEvent: 0
11752     AUC: Close Audio: Open Channels 0, Freq: 0
11996     Crypto-capable module loaded as default.
14133     MPH Take new rxlev measurements
14618     MPH: Switch to other mobile mode
14627     MPH: PCS1900
14628     MPH Take new rxlev measurements
14887     MPH: Switch to other mobile mode
14897     MPH: EGSM900_DCS1800
15751     CBS: cbs_main.c: CBS_ALIVE_TIMER_IND accepted
15777     FSFLASH: Formatting flash block 29
16193     BATT: Measurements are 3739 mV and -44.9 mA
16194     BATT: Compensated VBAT (3799 mV) based remaining capacity is 47.5%
16194     BATT: Average remaining capacity is 48.3%
16527     FSFLASH: Formatting flash block 30
17277     FSFLASH: Formatting flash block 31
17398     MPH Take new rxlev measurements
17883     MPH: Switch to other mobile mode
17892     MPH: PCS1900
17893     MPH Take new rxlev measurements
18027     FSFLASH: Formatting flash block 32
18152     MPH: Switch to other mobile mode
18162     MPH: EGSM900_DCS1800
18777     FSFLASH: Formatting flash block 33
19527     FSFLASH: Formatting flash block 34
20277     FSFLASH: Formatting flash block 35
20662     MPH Take new rxlev measurements
21027     FSFLASH: Formatting flash block 36
21145     MPH: Switch to other mobile mode
21155     MPH: PCS1900
21155     MPH Take new rxlev measurements
21414     MPH: Switch to other mobile mode
21424     MPH: EGSM900_DCS1800
21777     FSFLASH: Formatting flash block 37
22527     FSFLASH: Formatting flash block 38
23251     CBS: cbs_main.c: CBS_ALIVE_TIMER_IND accepted
23277     FSFLASH: Formatting flash block 39
23693     BATT: Measurements are 3748 mV and -33.4 mA
23694     BATT: Compensated VBAT (3805 mV) based remaining capacity is 49.1%
23694     BATT: Average remaining capacity is 48.5%
23924     MPH Take new rxlev measurements
24027     FSFLASH: Formatting flash block 40
24409     MPH: Switch to other mobile mode
24418     MPH: PCS1900
24418     MPH Take new rxlev measurements
24678     MPH: Switch to other mobile mode
24687     MPH: EGSM900_DCS1800
24777     FSFLASH: Formatting flash block 41
25527     FSFLASH: Formatting flash block 4227027     FSFLASH: Formatting flash block 44
27188     MPH Take new rxlev measurements
27194     BATT: Measurements are 3806 mV and -26.5 mA
27194     BATT: Charge current (-26.5 mA) based remaining capacity is 100.0%
27194     BATT: Average remaining capacity is 61.4%
27444     BATT: Measurements are 3763 mV and -51.0 mA
27444     BATT: Compensated VBAT (3638 mV) based remaining capacity is 6.7%
27444     BATT: Average remaining capacity is 50.4%
27671     MPH: Switch to other mobile mode
27680     MPH: PCS1900
27680     MPH Take new rxlev measurements
27694     BATT: Measurements are 3752 mV and -45.0 mA
27694     BATT: Compensated VBAT (3627 mV) based remaining capacity is 5.8%
27694     BATT: Average remaining capacity is 43.0%
27777     FSFLASH: Formatting flash block 45
27940     MPH: Switch to other mobile mode
27944     BATT: Measurements are 3763 mV and -51.0 mA
27944     BATT: Compensated VBAT (3638 mV) based remaining capacity is 6.7%
27944     BATT: Average remaining capacity is 37.8%
27949     MPH: EGSM900_DCS1800
28194     BATT: Measurements are 3763 mV and -34.0 mA
28194     BATT: Compensated VBAT (3638 mV) based remaining capacity is 6.7%
28194     BATT: Average remaining capacity is 33.9%
28444     BATT: Measurements are 3763 mV and -34.0 mA
28444     BATT: Compensated VBAT (3638 mV) based remaining capacity is 6.7%
28444     BATT: Average remaining capacity is 30.9%
28527     FSFLASH: Formatting flash block 46
28694     BATT: Measurements are 3763 mV and -28.0 mA
28694     BATT: Compensated VBAT (3638 mV) based remaining capacity is 6.7%
28694     BATT: Average remaining capacity is 28.5%
28944     BATT: Measurements are 3763 mV and -34.0 mA
28944     BATT: Compensated VBAT (3638 mV) based remaining capacity is 6.7%
28944     BATT: Average remaining capacity is 26.5%
29194     BATT: Measurements are 3763 mV and -28.0 mA
29194     BATT: Compensated VBAT (3638 mV) based remaining capacity is 6.7%
29194     BATT: Average remaining capacity is 24.8%
29277     FSFLASH: Formatting flash block 47
29444     BATT: Measurements are 3763 mV and -34.0 mA
29444     BATT: Compensated VBAT (3638 mV) based remaining capacity is 6.7%
29444     BATT: Average remaining capacity is 23.4%
29694     BATT: Measurements are 3763 mV and -34.0 mA
29694     BATT: Compensated VBAT (3638 mV) based remaining capacity is 6.7%
29694     BATT: Average remaining capacity is 22.2%
29944     BATT: Measurements are 3763 mV and -28.0 mA
29944     BATT: Compensated VBAT (3638 mV) based remaining capacity is 6.7%
29944     BATT: Average remaining capacity is 21.2%
30027     FSFLASH: Formatting flash block 48
30194     BATT: Measurements are 3763 mV and -28.0 mA
30194     BATT: Compensated VBAT (3638 mV) based remaining capacity is 6.7%
30194     BATT: Average remaining capacity is 20.3%
30444     BATT: Measurements are 3763 mV and -34.0 mA
30444     BATT: Compensated VBAT (3638 mV) based remaining capacity is 6.7%
30444     BATT: Average remaining capacity is 19.5%
30449     MPH Take new rxlev measurements
30694     BATT: Measurements are 3763 mV and -51.0 mA
30694     BATT: Compensated VBAT (3638 mV) based remaining capacity is 6.7%
30694     BATT: Average remaining capacity is 18.8%
30751     CBS: cbs_main.c: CBS_ALIVE_TIMER_IND accepted
30777     FSFLASH: Formatting flash block 49
30931     MPH: Switch to other mobile mode
30941     MPH: PCS1900
30941     MPH Take new rxlev measurements
30944     BATT: Measurements are 3763 mV and -45.0 mA
30944     BATT: Compensated VBAT (3638 mV) based remaining capacity is 6.7%
30944     BATT: Average remaining capacity is 18.1%
31194     BATT: Measurements are 3752 mV and -56.0 mA
31194     BATT: Compensated VBAT (3627 mV) based remaining capacity is 5.8%
31194     BATT: Average remaining capacity is 17.5%
31200     MPH: Switch to other mobile mode
31210     MPH: EGSM900_DCS1800
31444     BATT: Measurements are 3752 mV and -28.0 mA
31444     BATT: Compensated VBAT (3627 mV) based remaining capacity is 5.8%
31444     BATT: Average remaining capacity is 15.3%
31527     FSFLASH: Formatting flash block 50
31694     BATT: Measurements are 3763 mV and -28.0 mA
31694     BATT: Compensated VBAT (3638 mV) based remaining capacity is 6.7%
31694     BATT: Average remaining capacity is 13.3%
31944     BATT: Measurements are 3763 mV and -39.0 mA
31944     BATT: Compensated VBAT (3638 mV) based remaining capacity is 6.7%
31944     BATT: Average remaining capacity is 11.2%
32194     BATT: Measurements are 3763 mV and -28.0 mA
32194     BATT: Compensated VBAT (3638 mV) based remaining capacity is 6.7%
32194     BATT: Average remaining capacity is 6.5%
32277     FSFLASH: Formatting flash block 51
32444     BATT: Measurements are 3763 mV and -22.0 mA
32444     BATT: Compensated VBAT (3638 mV) based remaining capacity is 6.7%
32444     BATT: Average remaining capacity is 6.5%
32694     BATT: Measurements are 3763 mV and -39.0 mA
32694     BATT: Compensated VBAT (3638 mV) based remaining capacity is 6.7%
32694     BATT: Average remaining capacity is 6.6%
32944     BATT: Measurements are 3763 mV and -28.0 mA
32944     BATT: Compensated VBAT (3638 mV) based remaining capacity is 6.7%
32944     BATT: Average remaining capacity is 6.6%
33027     FSFLASH: Formatting flash block 52
33194     BATT: Measurements are 3763 mV and -28.0 mA
33194     BATT: Compensated VBAT (3638 mV) based remaining capacity is 6.7%
33194     BATT: Average remaining capacity is 6.6%
33444     BATT: Measurements are 3763 mV and -34.0 mA
33444     BATT: Compensated VBAT (3638 mV) based remaining capacity is 6.7%
33444     BATT: Average remaining capacity is 6.6%
33694     BATT: Measurements are 3763 mV and -34.0 mA
33694     BATT: Compensated VBAT (3638 mV) based remaining capacity is 6.7%
33694     BATT: Average remaining capacity is 6.6%
33710     MPH Take new rxlev measurements
33777     FSFLASH: Formatting flash block 53
33944     BATT: Measurements are 3763 mV and -39.0 mA
33944     BATT: Compensated VBAT (3638 mV) based remaining capacity is 6.7%
33944     BATT: Average remaining capacity is 6.6%
34194     BATT: Measurements are 3752 mV and -56.0 mA
34194     BATT: Compensated VBAT (3627 mV) based remaining capacity is 5.8%
34195     MPH: Switch to other mobile mode
34195     BATT: Average remaining capacity is 6.5%
34204     MPH: PCS1900
34204     MPH Take new rxlev measurements
34444     BATT: Measurements are 3752 mV and -51.0 mA
34444     BATT: Compensated VBAT (3627 mV) based remaining capacity is 5.8%
34444     BATT: Average remaining capacity is 6.5%
34464     MPH: Switch to other mobile mode
34473     MPH: EGSM900_DCS1800
34527     FSFLASH: Formatting flash block 54
34694     BATT: Measurements are 3763 mV and -28.0 mA
34694     BATT: Compensated VBAT (3638 mV) based remaining capacity is 6.7%
34694     BATT: Average remaining capacity is 6.5%
34944     BATT: Measurements are 3763 mV and -39.0 mA
34944     BATT: Compensated VBAT (3638 mV) based remaining capacity is 6.7%
34944     BATT: Average remaining capacity is 6.5%
35194     BATT: Measurements are 3763 mV and -28.0 mA
35194     BATT: Compensated VBAT (3638 mV) based remaining capacity is 6.7%
35194     BATT: Average remaining capacity is 6.5%
35277     FSFLASH: Formatting flash block 55
35444     BATT: Measurements are 3763 mV and -28.0 mA
35444     BATT: Compensated VBAT (3638 mV) based remaining capacity is 6.7%
35444     BATT: Average remaining capacity is 6.5%
35694     BATT: Measurements are 3763 mV and -34.0 mA
35694     BATT: Compensated VBAT (3638 mV) based remaining capacity is 6.7%
35694     BATT: Average remaining capacity is 6.5%
35944     BATT: Measurements are 3763 mV and -28.0 mA
35944     BATT: Compensated VBAT (3638 mV) based remaining capacity is 6.7%
35944     BATT: Average remaining capacity is 6.5%
36027     FSFLASH: Formatting flash block 56
36194     BATT: Measurements are 3763 mV and -34.0 mA
36194     BATT: Compensated VBAT (3638 mV) based remaining capacity is 6.7%
36194     BATT: Average remaining capacity is 6.5%
36444     BATT: Measurements are 3763 mV and -34.0 mA
36444     BATT: Compensated VBAT (3638 mV) based remaining capacity is 6.7%
36444     BATT: Average remaining capacity is 6.6%
36694     BATT: Measurements are 3763 mV and -28.0 mA
36694     BATT: Compensated VBAT (3638 mV) based remaining capacity is 6.7%
36694     BATT: Average remaining capacity is 6.6%
36777     FSFLASH: Formatting flash block 57
36944     BATT: Measurements are 3763 mV and -28.0 mA
36944     BATT: Compensated VBAT (3638 mV) based remaining capacity is 6.7%
36944     BATT: Average remaining capacity is 6.6%
36974     MPH Take new rxlev measurements
37194     BATT: Measurements are 3763 mV and -51.0 mA
37194     BATT: Compensated VBAT (3638 mV) based remaining capacity is 6.7%
37194     BATT: Average remaining capacity is 6.6%
37444     BATT: Measurements are 3752 mV and -51.0 mA
37444     BATT: Compensated VBAT (3627 mV) based remaining capacity is 5.8%
37444     BATT: Average remaining capacity is 6.5%
37457     MPH: Switch to other mobile mode
37466     MPH: PCS1900
37467     MPH Take new rxlev measurements
37527     FSFLASH: Formatting flash block 58
37694     BATT: Measurements are 3763 mV and -45.0 mA
37694     BATT: Compensated VBAT (3638 mV) based remaining capacity is 6.7%
37694     BATT: Average remaining capacity is 6.5%
37726     MPH: Switch to other mobile mode
37735     MPH: EGSM900_DCS1800
37944     BATT: Measurements are 3752 mV and -39.0 mA
37944     BATT: Compensated VBAT (3627 mV) based remaining capacity is 5.8%
37944     BATT: Average remaining capacity is 6.5%
38194     BATT: Measurements are 3763 mV and -34.0 mA
38194     BATT: Compensated VBAT (3638 mV) based remaining capacity is 6.7%
38194     BATT: Average remaining capacity is 6.5%
38253     CBS: cbs_main.c: CBS_ALIVE_TIMER_IND accepted
38277     FSFLASH: Formatting flash block 59
38444     BATT: Measurements are 3763 mV and -28.0 mA
38444     BATT: Compensated VBAT (3638 mV) based remaining capacity is 6.7%
38444     BATT: Average remaining capacity is 6.5%
38694     BATT: Measurements are 3763 mV and -34.0 mA
38694     BATT: Compensated VBAT (3638 mV) based remaining capacity is 6.7%
38694     BATT: Average remaining capacity is 6.5%
38944     BATT: Measurements are 3763 mV and -28.0 mA
38944     BATT: Compensated VBAT (3638 mV) based remaining capacity is 6.7%
38944     BATT: Average remaining capacity is 6.5%

Последний раз редактировалось Layder; 21.10.2008 в 09:07.

21.10.2008, 08:41

Новое

Arni
Сенсей

Сообщений:: 362

Регистрация:: 04.05.2007

Возраст:: 43

Рейтинг мнений: 712

Вес репутации: 398

Re: K300 не заряжается #8

Цитата:

Сообщение от Layder

а хез. принесли - не заряжается. а там около стекляшки флюсом корявым все залито и на соплях запаяно было, поэтому сразу и переделывал.

Это извините за прямоту просто безответственно. Начинать чинить телефон не посмотрев как он себя ведет полагаясь на слова клиента? Я как-то очень давно, долго объяснял клиенту, почему в Ericsson 2618 из за РФ (Паучок) процессора не заряжается телефон.

Вы могли бы в качестве эксперимента, дабы исключить 100% вероятности плохо припаянной стекляшки, или её повреждения, поставить перемычку между конденсаторами С2400 и C2620? Если все будет так же, то будем думать дальше ...

22.10.2008, 10:53

Пользователь добавил плюс

alfv (22.10.2008)

Новое

alfv
MCRF Инженер

Сообщений:: 331

Регистрация:: 21.06.2005

Возраст:: 46

Рейтинг мнений: 439

Вес репутации: 269

Re: K300 не заряжается #9

Помню , был случай , что нормальный заряд шел только с перемычкой . Со стеклом заряжаться не хотел . Это был или K700 или K300. Тело было после воды .

22.10.2008, 11:15

Новое

Viktor001
Сенсей

Сообщений:: 1,761

Регистрация:: 19.10.2005

Возраст:: 57

Рейтинг мнений: 1400

Вес репутации: 375

Re: K300 не заряжается #10

BATT: Measurements are 3763 mV and -28.0 mA
Это ненормально, что ток со знаком "минус". Получается, что телефон не заряжает, а наоборот разряжает АКБ. Но почему он не хочет заряжать, в логе не показывает.Так что придётся самому искать.
Контролер питания проверить бы. Вдруг, те что брал с разборки, попались убитые по среднему контакту.
Или всунуть вместо ключа v2610, Самсунговскую LTH7. Она полностью автоматическая, и пускай заряжает.

22.10.2008, 19:49

Пользователь добавил плюс

Новое

Layder
Член группы поддержки продукта

Сообщений:: 2,007

Регистрация:: 08.06.2006

Возраст:: 48

Рейтинг мнений: 1112

Вес репутации: 560

Re: K300 не заряжается #11

с перемычкой не заряжается, с другой батареей тоже, с третим контроллером тоже, с замененым разъемом батареи тоже, с другой флешкой - тоже.
менять RF процессор?

23.10.2008, 22:49

Новое

vth
Неактивный

Сообщений:: 294

Регистрация:: 18.01.2008

Возраст:: 41

Рейтинг мнений: 489

Вес репутации: 0

Re: K300 не заряжается #12

Ну стоит проверить терморезистор r2324, и верхнее плечо r2425.
Только не нашел я на плате ни того, ни другого. Может вам повезёт больше.

24.10.2008, 09:48

Пользователь добавил плюс

Layder (24.10.2008)

Новое

Layder
Член группы поддержки продукта

Сообщений:: 2,007

Регистрация:: 08.06.2006

Возраст:: 48

Рейтинг мнений: 1112

Вес репутации: 560

Re: K300 не заряжается #13

они на верхней стороне над джойстиком стоят.
вот телефон!
мало того, что терморезистор 2324 был плохо припаян, мало того, что r2524 второй стороной коротил на землю через пятак незапаяного конденсатора рядом с ним, то после того, как это восстановил, ВСЕ РАВНО тоже самое, что и было описано в первом посте!!!

24.10.2008, 11:37

Новое

alibom
Участник

Сообщений:: 121

Регистрация:: 12.05.2008

Возраст:: 49

Рейтинг мнений: 6

Вес репутации: 298

Re: K300 не заряжается #14

После стольких мучений! надо сделать телефон а иначе вы не Лидер.
Шутка конечно!

24.10.2008, 12:47

Новое

Layder
Член группы поддержки продукта

Сообщений:: 2,007

Регистрация:: 08.06.2006

Возраст:: 48

Рейтинг мнений: 1112

Вес репутации: 560

Re: K300 не заряжается #15

Цитата:

Сообщение от alibom

После стольких мучений! надо сделать телефон а иначе вы не Лидер.
Шутка конечно!

ОФФтопик:

правильно читать Лэйдер, как я писал уже где-то, это игра слов Layer-Lider

а, вообще, я уже нашел на него рабочую плату

24.10.2008, 14:19

Похожие темы
Тема	Автор	Раздел	Ответов	Последнее сообщение
1100 не заряжается	Acid	Семейство DCT-4, WD-2	8	30.07.2005 16:19
т190 не заряжается	Acid	Motorola ODM	3	25.07.2005 07:33
Т28 безконечно заряжается....	kent_zae1	Ericsson серия	0	17.06.2005 15:02

Здесь присутствуют: 1 (пользователей: 0 , гостей: 1)

Имя		Запомнить?
Пароль

Наши партнеры

Layder vbmenu_register("postmenu_141152", false); Член группы поддержки продукта

Viktor001 vbmenu_register("postmenu_141190", false); Сенсей

Layder vbmenu_register("postmenu_141195", false); Член группы поддержки продукта

vth vbmenu_register("postmenu_141198", false); Неактивный

Arni vbmenu_register("postmenu_141221", false); Сенсей

Viktor001 vbmenu_register("postmenu_141223", false); Сенсей

Layder vbmenu_register("postmenu_141244", false); Член группы поддержки продукта

Arni vbmenu_register("postmenu_141324", false); Сенсей

alfv vbmenu_register("postmenu_141328", false); MCRF Инженер

Viktor001 vbmenu_register("postmenu_141376", false); Сенсей

Layder vbmenu_register("postmenu_141523", false); Член группы поддержки продукта

vth vbmenu_register("postmenu_141556", false); Неактивный

Layder vbmenu_register("postmenu_141572", false); Член группы поддержки продукта

alibom vbmenu_register("postmenu_141575", false); Участник

Layder vbmenu_register("postmenu_141591", false); Член группы поддержки продукта

Layder
Член группы поддержки продукта

Viktor001
Сенсей

Layder
Член группы поддержки продукта

vth
Неактивный

Arni
Сенсей

Viktor001
Сенсей

Layder
Член группы поддержки продукта

Arni
Сенсей

alfv
MCRF Инженер

Viktor001
Сенсей

Layder
Член группы поддержки продукта

vth
Неактивный

Layder
Член группы поддержки продукта

alibom
Участник

Layder
Член группы поддержки продукта