Ищу способ восстановления I545 os 5.0.1
#1
Принесли на русификацию с прошивкой
I545VRUGOC1. Мои действия, получен root, попытки активировать язык Language_Enabler результата не дало(это и понятно, но вдруг). Дальше перебор разных Custom ROM.
Установил
FlashFire и через нее начал ставить разные Custom ROM.
1. stang5litre+5.0+Edition+v2NON-MDK русского нет.
2. Fusion-v5.1-2015-04-02-fusionsp_jfltevzw русского нет.
3. I545_OC1_Stock_Rooted_ROM_wNK4_BL в процесе обновления на данный кастом телефон просто выключился. Предупреждения читал **Caution!** The following process is only for the Verizon I545 S4 Variant. Use on any other device may result in a hardbrick!. Но не дочитал
Caution!: do not flash if you took the OC1 ota update.
Мои действия по восстановлению.
1.
ATF запись SDCard для восстановления, результата нет.
2. Попытка восстановления
RIFF-ом результата нет.
Connect & Get ID
Код:
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [Samsung I545 V1.0.5067.52868]
Connecting to the dead body...OK
Set I/O Voltage reads as 1.79V, TCK Frequency is 4 MHz
Detected dead body ID: 0x2071B0E1
Analize JTAG Chain
Код:
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [Samsung I545 V1.0.5067.52868]
Connecting to the target...OK
Set I/O Voltage reads as 1.80V, TCK Frequency is 4 MHz
Following devices are found on the JTAG chain:
Device on TAP #0: ID = 0x4F1F0F0F, IR Length = 0x04 bits
Device on TAP #1: ID = 0x2071B0E1, IR Length = 0x0B bits
Total IR length: 0x000F bits
Analizing IDCODE(s) of the JTAG scan chain:
1. 0x2071B0E1: Qualcomm APQ8064T, H/W Rev. #2
Resurrection
Код:
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [Samsung I545 V1.0.5067.52868]
Connecting to the dead body...OK
Detected dead body ID: 0x2071B0E1 - CORRECT!
Set I/O Voltage reads as 1.79V, TCK Frequency is 4 MHz
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...FAILED
ERROR: No response from the RIFF Box
со скоростью естественно игрался.
eMMC Plugin_Load Layout from Device
Код:
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [Samsung I545 V1.0.5067.52868]
Connecting to the dead body...OK
Detected dead body ID: 0x2071B0E1 - CORRECT!
Set I/O Voltage reads as 1.79V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Settings Code: 0x20010000000000000000000040000000
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...FAILED
ERROR: Wrong DCC data length received.
Продолжаем
3.
GPGeMMC Tool v1.35
Попытка зачитать.
Код:
Read operation(Make sure to press Power on key)...
CPU ID: 7704A04B.
Phone doesn't respond for a long time,please reconnect!
>>Time: 1:12
Попытка записать файл с сапорта Samsung_I545_Boot.bin
Код:
Writing in progress(make sure to press Power On key)...
CPU ID: 7704A04B.
Phone doesn't respond for a long time,please reconnect!
>>Time: 59 s
4.Переходим на
ATFJ. Для восстановления выбираю
SCH-i545_4.3_FULL_BOOT результат.
Resetting JTAG
Код:
Resetting and Exploring JTAG chain...1 Device(s)
Device #1 ID 0x4F1F0F0F IR4
Restore Boot
Код:
Restore Boot...
Waiting for Device Connection 15 second(s)...OK
Resetting and Exploring JTAG chain...OK
Halting Core...OK
Initializing Device...OK
Detecting eMMC #1 ID...eMMC Timeout, Status 0x00000000
Выбираю
SCH-i545_4.4.2_FULL_BOOT
Resetting JTAG
Код:
Resetting and Exploring JTAG chain...1 Device(s)
Device #1 ID 0x4F1F0F0F IR4
Restore Boot
Код:
Restore Boot...
Waiting for Device Connection 15 second(s)...OK
Resetting and Exploring JTAG chain...OK
Halting Core...OK
Initializing Device...OK
Detecting eMMC #1 ID...eMMC Timeout, Status 0x00000000
Остается только попробовать прямую запись в eMMC флешь. Может кто подскажет что еще сделать и где найти распиновку ISP для прямой записи eMMC.
Последние файлы
