Selected FlashSettings : Manual
Files Set for Flashing :
MCU : rm146__07.20.mcusw
PPM : rm146__07.20.ppm_i
CNT : rm146__07.20.image_i_128
Check FlashFiles, Please, wait...

Backup enabled, Will read Certificates now...
Backup CRT308
CRT308 Backup Created... :)
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info : 
CMT ASICID   : 000000010000022600010006010C192101001101
CMT EM0 ID  : 00000232
CMT EM1 ID  : 00000353
CMT PUB ID  : 04C0010A32706B56D9A14A3CE0E968D373C85BF3
CMT MODE ID : 00
CMT R_HASH  : BAF3A9C3DBFA8454937DB77F2B8852B1
CMT ROM ID  : 191EC665DFAAF68F

CMT : Sending 2nd loader...
Use : RAP3Gv3_2nd.fg
CMT Loader sent, Boot Ok
CMT Flash ID: 220800EC < SAMSUNG [SEC] => K8F5615ETM\K5G5629ATD
FLASHID : 220800EC , CMT , NOR
FLCNT  : 00000000000000000000000000000000
FLMCID : FFFF000000000000
Sending ALGO....
Use : RAP3Gv3_algo.fg
CMT Algo sent
CMT PAPUB : 1A1F5C3DB717937F54455937AF9DA76AA2EE136800
Transmission mode :  Dual (Ddr, TX2) 

Boot Done!

CMT : Read NPC certificate...
Cert size : 12288 byte(s)
IMEI : 355550013244210
CMT : Read CCC certificate...
Cert size : 8192 byte(s)
CMT : Read HWC certificate...
Cert size : 12288 byte(s)
CMT : Read VARIANT certificate...
Cert size : 20480 byte(s)
Cert Read done!

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
WMDRM_PD Data saved...

RPL saved : E:\Documents and Settings\Администратор\Рабочий стол\прошивальщики\Best\Backup\Cert\355550013244210.rpl

Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info : 
CMT ASICID   : 000000010000022600010006010C192101001101
CMT EM0 ID  : 00000232
CMT EM1 ID  : 00000353
CMT PUB ID  : 04C0010A32706B56D9A14A3CE0E968D373C85BF3
CMT MODE ID : 00
CMT R_HASH  : BAF3A9C3DBFA8454937DB77F2B8852B1
CMT ROM ID  : 191EC665DFAAF68F

CMT : Sending 2nd loader...
Use : RAP3Gv3_2nd.fg
CMT Loader sent, Boot Ok
CMT Flash ID: 220800EC < SAMSUNG [SEC] => K8F5615ETM\K5G5629ATD
FLASHID : 220800EC , CMT , NOR
FLCNT  : 00000000000000000000000000000000
FLMCID : FFFF000000000000
Sending ALGO....
Use : RAP3Gv3_algo.fg
CMT Algo sent
CMT PAPUB : 1A1F5C3DB717937F54455937AF9DA76AA2EE136800
Transmission mode :  Dual (Ddr, TX2) 

Boot Done!

Transmission mode :  Dual (Ddr, TX2) 
Erase : Processing rm146__07.20.mcusw
Found 9 areas to erase, erase group
Asic : CMT , Sub : NOR
CMT , NOR , Area : 0x00000000 - 0x000006BF
CMT , NOR , Area : 0x000006C0 - 0x0001FFFF
CMT , NOR , Area : 0x00020000 - 0x0007FFFF
CMT , NOR , Area : 0x00080000 - 0x000DFFFF
CMT , NOR , Area : 0x00100000 - 0x001FFFFF
CMT , NOR , Area : 0x00200000 - 0x0031FFFF
CMT , NOR , Area : 0x00320000 - 0x0105FFFF
CMT , NOR , Area : 0x01060000 - 0x01067FFF
CMT , NOR , Area : 0x01068000 - 0x0107FFFF
Using TimeOut : 5 min ( 300 sec )
Erasing, wait.....
CMT : Group erase Ok
TIME : Erase time : 00:00:41
Transmission mode :  Dual (Ddr, TX2) 
Write : Processing rm146__07.20.mcusw
CMT: Writing Hash CERT [NOLO]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [UPDAPP]
CMT: Writing Hash CERT [DSP0]
CMT: Writing Hash CERT [MCUSW]
CMT: Writing Hash CERT [PMM_CONF]
CMT: Writing Hash CERT [SBIF_CONF]
Total writen 947 blocks
TIME : Write time : 00:01:41 


Transmission mode :  Dual (Ddr, TX2) 
Erase : Processing rm146__07.20.ppm_i
Found 1 areas to erase, erase group
Asic : CMT , Sub : NOR
CMT , NOR , Area : 0x01080000 - 0x015FFFFF
Using TimeOut : 5 min ( 300 sec )
Erasing, wait.....
CMT : Group erase Ok
TIME : Erase time : 00:00:12
Transmission mode :  Dual (Ddr, TX2) 
Write : Processing rm146__07.20.ppm_i
Total writen 282 blocks
TIME : Write time : 00:00:30 


ConvertImage: Processing rm146__07.20.image_i_128
ConvertImage: Page Size is 128K, no need convert
Transmission mode :  Dual (Ddr, TX2) 
Erase : Processing rm146__07.20.image_i_128
Found 1 areas to erase, erase group
Asic : CMT , Sub : NOR
CMT , NOR , Area : 0x01600000 - 0x01FDFFFF
Using TimeOut : 5 min ( 300 sec )
Erasing, wait.....
CMT : Group erase Ok
TIME : Erase time : 00:00:27
Transmission mode :  Dual (Ddr, TX2) 
Write : Processing rm146__07.20.image_i_128
Total writen 296 blocks
TIME : Write time : 00:00:32 


Init Service mode... Wait...

Reading Phone Info....
Connected phone -   Nokia 5300
Software Info:     V 07.20
23-10-08
RM-146
(c) Nokia.           
IMEI:  355550013244210
Product code:  0540652
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Checking User Certificates...
Total - 0 certs
Uploading certificates...
Writen 21 certs!
AfterFlash operations done... Reconnect, wait...
Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info...  - Ok

Phone disconected!

Connect phone on selected interface...

card found: 
registered to: leomin

Connect phone on selected interface...

UFS S/N 88888 boot - Ok

Connect phone on selected interface...

Read and Check phone data...
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info : 
CMT ASICID   : 000000010000022600010006010C192101001101
CMT EM0 ID  : 00000232
CMT EM1 ID  : 00000353
CMT PUB ID  : 0C70000CA2CD7E568AC43D16830334A9BD59ADFE
CMT MODE ID : 00
CMT R_HASH  : BAF3A9C3DBFA8454937DB77F2B8852B1
CMT ROM ID  : 191EC665DFAAF68F

CMT : Sending 2nd loader...
Use : RAP3Gv3_2nd.fg
CMT Loader sent, Boot Ok
MCU Configuration
FLASHID : 89810089 , CMT , NOR
CMT Flash ID : 89810089 < INTEL => NU48F256
FLCNT   : 00000000000000000000000000000000000000
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAP3Gv3_algo_v1331.fg
CMT Algo sent
CMT PAPUB : E691EA16A7593A9BB28832D7312A39F7ED668D0500
Transmission mode :  Dual (Ddr, TX2) 

Boot Done!

Init Service mode... Wait...

SimLock status : SimLock is Ok
Security status : Security is Ok

Done!


Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info...  - Ok

Reading Phone Info....
Connected phone -    Nokia 3110c
Software ver : V 07.21 05-11-08 RM-237 (c) Nokia.           
IMEI    :      0000000000000
Ape Ver :      
APE Var :      
APE ADSP:      
DSP Ver :      ICPR61_08w10
APE Test:      
PPM     :      V 07.21
05-11-08
RM-237
(c) Nokia.           
I
CNT     :      Content: i
V 07.21
05-11-08
RM-237
(c) Nokia.           

Product SN   :     MPH415691
Product code :     0514949
Base Prd.code:     0542523
Module code  :     0203291
Long Prod.SN :     
Hardware info=======
HWID  : 5008
Retu  : 32
Tahvo : 53
Batery: 4645 mV
Camera: 
CMT BT: Error
APE BT: 
APE HW: Error
LCDVer: Error
RF ic : Error
Lock info ===========
IMEI       : 0000000000000
IMEI spNet : 
IMEI svNet : 

Conf key     : 05FFFFFF02A80000
Provider key : 05FFFFFF00000000
Provider    : Unknown Provider
Counters   : Key 7  [3] , Fbus 0  [10]
Blocks      : 111

LOCK STATUS :
=============================
Error collect lock info, try again
User Code : 12345
MMC pwd  : no any record found
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery] 

Done!

Selected FlashSettings : Manual
Files Set for Flashing :
MCU : rm237__07.21.mcusw
PPM : rm237__07.21.ppm_i
CNT : rm237__07.21.image_i
Check FlashFiles, Please, wait...

Backup enabled, Will read Certificates now...
Backup CRT308
CRT308 Backup Created... :)
CRT308 Backup Created... :)
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info : 
CMT ASICID   : 000000010000022600010006010C192101001101
CMT EM0 ID  : 00000232
CMT EM1 ID  : 00000353
CMT PUB ID  : 0C70000CA2CD7E568AC43D16830334A9BD59ADFE
CMT MODE ID : 00
CMT R_HASH  : BAF3A9C3DBFA8454937DB77F2B8852B1
CMT ROM ID  : 191EC665DFAAF68F

CMT : Sending 2nd loader...
Use : RAP3Gv3_2nd.fg
CMT Loader sent, Boot Ok
MCU Configuration
FLASHID : 89810089 , CMT , NOR
CMT Flash ID : 89810089 < INTEL => NU48F256
FLCNT   : 00000000000000000000000000000000000000
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAP3Gv3_algo_v1331.fg
CMT Algo sent
CMT PAPUB : E691EA16A7593A9BB28832D7312A39F7ED668D0500
Transmission mode :  Dual (Ddr, TX2) 

Boot Done!

CMT : Read NPC certificate...
Cert size : 12288 byte(s)
IMEI : 353183037537278
CMT : Read CCC certificate...
Cert size : 8192 byte(s)
CMT : Read HWC certificate...
Cert size : 12288 byte(s)
CMT : Read VARIANT certificate...
Cert size : 20480 byte(s)
Cert Read done!

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
WMDRM_PD Data saved...

RPL saved : D:\Best\BEST_v1.11\BEST_v1.11\Backup\Cert\00000000000.rpl

Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info : 
CMT ASICID   : 000000010000022600010006010C192101001101
CMT EM0 ID  : 00000232
CMT EM1 ID  : 00000353
CMT PUB ID  : 0C70000CA2CD7E568AC43D16830334A9BD59ADFE
CMT MODE ID : 00
CMT R_HASH  : BAF3A9C3DBFA8454937DB77F2B8852B1
CMT ROM ID  : 191EC665DFAAF68F

CMT : Sending 2nd loader...
Use : RAP3Gv3_2nd.fg
CMT Loader sent, Boot Ok
MCU Configuration
FLASHID : 89810089 , CMT , NOR
CMT Flash ID : 89810089 < INTEL => NU48F256
FLCNT   : 00000000000000000000000000000000000000
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAP3Gv3_algo_v1331.fg
CMT Algo sent
CMT PAPUB : E691EA16A7593A9BB28832D7312A39F7ED668D0500
Transmission mode :  Dual (Ddr, TX2) 

Boot Done!

Transmission mode :  Dual (Ddr, TX2) 
Erase : Processing rm237__07.21.mcusw
Found 9 areas to erase, erase group
Asic : CMT , Sub : NOR
CMT , NOR , Area : 0x00000000 - 0x000006BF
CMT , NOR , Area : 0x000006C0 - 0x0001FFFF
CMT , NOR , Area : 0x00020000 - 0x0007FFFF
CMT , NOR , Area : 0x00080000 - 0x000DFFFF
CMT , NOR , Area : 0x00100000 - 0x001FFFFF
CMT , NOR , Area : 0x00200000 - 0x0031FFFF
CMT , NOR , Area : 0x00320000 - 0x0105FFFF
CMT , NOR , Area : 0x01060000 - 0x01067FFF
CMT , NOR , Area : 0x01068000 - 0x0107FFFF
Using TimeOut : 5 min ( 300 sec )
Erasing, wait.....
CMT : Group erase Ok
TIME : Erase time : 00:01:35
Transmission mode :  Dual (Ddr, TX2) 
Write : Processing rm237__07.21.mcusw
CMT: Writing Hash CERT [NOLO]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [UPDAPP]
CMT: Writing Hash CERT [DSP0]
CMT: Writing Hash CERT [MCUSW]
CMT: Writing Hash CERT [PMM_CONF]
CMT: Writing Hash CERT [SBIF_CONF]
Total writen 942 blocks
TIME : Write time : 00:02:02 


Transmission mode :  Dual (Ddr, TX2) 
Erase : Processing rm237__07.21.ppm_i
Found 1 areas to erase, erase group
Asic : CMT , Sub : NOR
CMT , NOR , Area : 0x01080000 - 0x0151FFFF
Using TimeOut : 5 min ( 300 sec )
Erasing, wait.....
CMT : Group erase Ok
TIME : Erase time : 00:00:22
Transmission mode :  Dual (Ddr, TX2) 
Write : Processing rm237__07.21.ppm_i
Total writen 211 blocks
TIME : Write time : 00:00:26 


Transmission mode :  Dual (Ddr, TX2) 
Erase : Processing rm237__07.21.image_i
Found 1 areas to erase, erase group
Asic : CMT , Sub : NOR
CMT , NOR , Area : 0x01520000 - 0x01FDFFFF
Using TimeOut : 5 min ( 300 sec )
Erasing, wait.....
CMT : Group erase Ok
TIME : Erase time : 00:01:37
Transmission mode :  Dual (Ddr, TX2) 
Write : Processing rm237__07.21.image_i
Total writen 232 blocks
TIME : Write time : 00:00:32 


Init Service mode... Wait...

Reading Phone Info....
Connected phone -   Nokia 3110c
Software Info:     V 07.21
05-11-08
RM-237
(c) Nokia.           
IMEI:  00000000000
Product code:  0514949
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
FullFactorySet...OK!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Checking User Certificates...
Total - 0 certs
Uploading certificates...
Writen 21 certs!
AfterFlash operations done... Reconnect, wait...
Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info...  - Ok

Phone found!
Series 40 Device detected!
read info...  - Ok

BackUp UserData : [PhoneBook]
Generation mode : [S40]
Cnt Server Info : 0/2000/2000
115 phonebook records are found!
VCF Records saved to : BEST\Phones_Data\IMEI\
File saved to : D:\_Infinity_\_Best_\BEST_v1.11\BEST_v1.11\Phones_Data\35337704214xxxx\RM-604 Nokia 7230_35337704214xxxx.S4pb
Read done ;)
Done...

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm598__06.90.mcusw
PPM : rm598__06.90.ppm_i
CNT : rm598__06.90.image_i_0590228_003
Flashing phone now...
Check files done...
->  Check SW version...
FlashFile version : 06.90
Phone version : 06.90 26-02-10 RM-604 (c) Nokia            
->  Check SW version : Reflash
Check communication with phone....
ADL req restart
Communication verify done... Preparing...
Gathering phone info...
Check communication with phone...
Reboot....
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID:       000000010000022600000001020C192102044100
EM0 ID:        00001040
EM1 ID:        00001030
PUBLIC ID:     20100018F1030049C53F77A05D21F3B614E9B445
ASIC MODE ID:  00
ROOT KEY HASH: 7B045400E1752022F9EB80B0DEA9C65D
ROM ID:        67E82268F29CEA60
Use RAP3Gv40_2nd.fg
Processing RAWLOADER...
FLIC : 00300098
Req : XSR 1.6
Use RAP3Gv40_XSR17_alg.fg
Boot Done! :)
TIME : Boot time : 00:00:05 
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
ADL: phone is in flash mode
   ===Flashing [MCU]===
Erase : Processing rm598__06.90.mcusw
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01 
Write : Processing rm598__06.90.mcusw
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [UPDAPP]
CMT: Writing Hash CERT [DSP0]
CMT: Writing Hash CERT [MCUSW]
CMT: Writing Hash CERT [MCUSW1]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [ISA+DYNSW]
Total writen 135 blocks
TIME : Write time : 00:00:37 
MCU Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

   ===Flashing [PPM]===
Erase : Processing rm598__06.90.ppm_i
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00 
Write : Processing rm598__06.90.ppm_i
Total writen 26 blocks
TIME : Write time : 00:00:08 
PPM Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

   ===Flashing [CNT]===
Erase : Processing rm598__06.90.image_i_0590228_003
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:03 
Write : Processing rm598__06.90.image_i_0590228_003
Total writen 55 blocks
TIME : Write time : 00:00:18 
CNT Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

ADL: Close_Session
Content: 000300000000000000000000000000
ADL: Reboot

Flashing done!
Total flash time : 00:01:09
Reboot phone now...

Reading Phone Info....
Connected phone -   Nokia 7230
Software Info:     V 06.90 26-02-10 RM-604 (c) Nokia            
IMEI:  35337704214xxxx
PPM version :   V 06.90 26-02-10 RM-598 (c) Nokia             I
Product code:  0590228
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
FullFactorySet...OK!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Product code update...
Resetting LifeTimer
Reset Done!
Checking User Certificates...
Total - 34 certs
Data exist, skip certificate repair...
Set phone to Normal mode...
AfterFlash operations done...
Done!

Elapsed: 00:02:41
Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info...  - Ok

Unlock procedure started...

Phone Imei: 35xxxxxxxxxxxxxx
Checking locks...
Conf key     : 8000000000000000
Provider key : 3102000000000000
Provider    : T-Mobile;U.S.A.
Counters   : Key 0  [3] , Fbus 1  [10]
Blocks      : 14

LOCK STATUS :
=============================
BLK : 1
 Lock1:Open
BLK : 2
 Lock1:Open
BLK : 3
 Lock1:Open
BLK : 4
 Lock1:Open
BLK : 5
 Lock1:Open
BLK : 6
 Lock1:Open
BLK : 7
 Lock1:Open
BLK : 8
 Lock1:Open
BLK : 9
 Lock1:Open
BLK : 10
 Lock1:Open
BLK : 11
 Lock1:Open
BLK : 12
 Lock1:Open
BLK : 13
 Lock1:Open
BLK : 14
 Lock1:Open
=============================
LOCKS :  All Open
=============================
PA_SL2 phone detected...
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info : 
CMT ASICID   : 000000010000022600010006010C192101013000
CMT EM0 ID  : 00000295
CMT EM1 ID  : 00000B22
CMT PUB ID  : 1FB00119B69802543683C081AA51A8BBCDFBB4BE
CMT MODE ID : 00
CMT R_HASH  : BAF3A9C3DBFA8454937DB77F2B8852B1
CMT ROM ID  : 273F6D55DFAAF68F

CMT : Sending 2nd loader...
CMT Loader sent, Boot Ok
Init Service mode... Wait...

Key file updated...
Using F-bus count...
Sending code 740402421943047 Level : 7 to SimLock Server...
Simlock Server Answer: Phone already unlocked! :)
Done!

Phone disconected!

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info...  - Ok

Unlock procedure started...

Phone Imei: 35xxxxxxxxxxxxx
Checking locks...
Conf key     : 8000000000000000
Provider key : 3102000000000000
Provider    : T-Mobile;U.S.A.
Counters   : Key 0  [3] , Fbus 0  [10]
Blocks      : 14

LOCK STATUS :
=============================
BLK : 1
 Lock1:Close
BLK : 2
 Lock1:Close
BLK : 3
 Lock1:Close
BLK : 4
 Lock1:Close
BLK : 5
 Lock1:Close
BLK : 6
 Lock1:Close
BLK : 7
 Lock1:Close
BLK : 8
 Lock1:Close
BLK : 9
 Lock1:Close
BLK : 10
 Lock1:Close
BLK : 11
 Lock1:Close
BLK : 12
 Lock1:Close
BLK : 13
 Lock1:Close
BLK : 14
 Lock1:Close
=============================
LOCKS :  Closed
=============================
PA_SL2 phone detected...
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info : 
CMT ASICID   : 000000010000022600010006010C192101013000
CMT EM0 ID  : 00000295
CMT EM1 ID  : 00000B22
CMT PUB ID  : 1DF00109E3850254EFB6051943739F9296965C81
CMT MODE ID : 00
CMT R_HASH  : BAF3A9C3DBFA8454937DB77F2B8852B1
CMT ROM ID  : 273F6D55DFAAF68F

CMT : Sending 2nd loader...
CMT Loader sent, Boot Ok
Init Service mode... Wait...

Key file updated...
Using F-bus count...
Sending code 069139151289692 Level : 7 to SimLock Server...
Simlock Server Answer: Unlock code Accepted! :)
Done!

card found: S/N 
registered to: Gatin

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info...  - Ok

Reading Phone Info....
Connected phone -    Nokia 6303 classic
Software ver : V 10.12 08-04-10 RM-443 (c) Nokia            
IMEI    :      359333039021094
Ape Ver :      
APE Var :      
APE ADSP:      
DSP Ver :       ICPR81_09w37
APE Test:      
PPM     :      V 10.12 08-04-10 RM-443 (c) Nokia             I
CNT     :      Content: i_matt_black V 10.12 08-04-10 RM-443 (c) Nokia             
Product SN   :     KPE885740
Product code :     0587468
Base Prd.code:     0575069
Module code  :     0204282
Long Prod.SN :     0
Hardware info=======
HWID  : 2002
Retu  : 16
Tahvo : 22
Batery: 3747 mV
Camera: 
CMT BT: 410B-v190
APE BT: 
APE HW: 
LCDVer: SEIKO
RF ic : 
Lock info ===========
IMEI       : 359333039021094
IMEI spNet : 3A 95 33 03 93 20 01 09 
IMEI svNet : 33 95 33 03 93 20 01 49 F5 

Conf key     : 8000000000000000
Provider key : 2620700000000000
Provider    : O2 Deutschland (DCT3 Contract);Germany
Counters   : Key 0  [3] , Fbus 0  [10]
Blocks      : 2

LOCK STATUS :
=============================
BLK : 1
 Lock1:Close
BLK : 2
 Lock1:Close
=============================
LOCKS :  Closed
=============================
CRT308 Backup Created... :)

User Code : 12345
MMC pwd  : no any record found
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery] 

Done!

Using F-bus count...
Sending code 009070653401101 Level : 7 to SimLock Server...
Simlock Server Answer: Unlock code Accepted! :)
Done!


Reading Phone Info....
Connected phone -    Nokia 6303 classic
Software ver : V 10.12 08-04-10 RM-443 (c) Nokia            
IMEI    :      359333039021094
Ape Ver :      
APE Var :      
APE ADSP:      
DSP Ver :       ICPR81_09w37
APE Test:      
PPM     :      V 10.12 08-04-10 RM-443 (c) Nokia             I
CNT     :      Content: i_matt_black V 10.12 08-04-10 RM-443 (c) Nokia             
Product SN   :     KPE885740
Product code :     0587468
Base Prd.code:     0575069
Module code  :     0204282
Long Prod.SN :     0
Hardware info=======
HWID  : 2002
Retu  : 16
Tahvo : 22
Batery: 3736 mV
Camera: 
CMT BT: 410B-v190
APE BT: 
APE HW: 
LCDVer: SEIKO
RF ic : 
Lock info ===========
IMEI       : 359333039021094
IMEI spNet : 3A 95 33 03 93 20 01 09 
IMEI svNet : 33 95 33 03 93 20 01 49 F5 

Conf key     : 8000000000000000
Provider key : 2620700000000000
Provider    : O2 Deutschland (DCT3 Contract);Germany
Counters   : Key 0  [3] , Fbus 0  [10]
Blocks      : 2

LOCK STATUS :
=============================
BLK : 1
 Lock1:Open
BLK : 2
 Lock1:Open
=============================
LOCKS :  All Open
=============================
CRT308 Backup Created... :)

User Code : 12345
MMC pwd  : no any record found
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery] 

Done!

Phone disconected!

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info...  - Ok

Reading Phone Info....
Connected phone -    Nokia 6303 classic
Software ver : V 08.90 30-06-09 RM-443 (c) Nokia            
IMEI    :      356914038039766
Ape Ver :      
APE Var :      
APE ADSP:      
DSP Ver :       ICPR81_09w10_pre
APE Test:      
PPM     :      V 08.90 30-06-09 RM-443 (c) Nokia             C
CNT     :      Content: c_de_steel O2 DE 30-06-09 RM-443 (c) Nokia              
Product SN   :     KMI614508
Product code :     0587468
Base Prd.code:     0575069
Module code  :     0204282
Long Prod.SN :     0
Hardware info=======
HWID  : 2001
Retu  : 15
Tahvo : 22
Batery: 3728 mV
Camera: 
CMT BT: 410B-v170
APE BT: 
APE HW: 
LCDVer: SHARP
RF ic : 
Lock info ===========
IMEI       : 356914038039766
IMEI spNet : 3A 65 19 04 83 30 79 06 
IMEI svNet : 33 65 19 04 83 30 79 26 F3 

Conf key     : 8000000000000000
Provider key : 2620700000000000
Provider    : O2 Deutschland (DCT3 Contract);Germany
Counters   : Key 0  [3] , Fbus 0  [10]
Blocks      : 2

LOCK STATUS :
=============================
BLK : 1
 Lock1:Close
BLK : 2
 Lock1:Close
=============================
LOCKS :  Closed
=============================
CRT308 Backup Created... :)

User Code : 12345
MMC pwd  : no any record found
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery] 

Done!

Using F-bus count...
Sending code 147084764152188 Level : 7 to SimLock Server...
Simlock Server Answer: Unlock code Accepted! :)
Done!


Reading Phone Info....
Connected phone -    Nokia 6303 classic
Software ver : V 08.90 30-06-09 RM-443 (c) Nokia            
IMEI    :      356914038039766
Ape Ver :      
APE Var :      
APE ADSP:      
DSP Ver :       ICPR81_09w10_pre
APE Test:      
PPM     :      V 08.90 30-06-09 RM-443 (c) Nokia             C
CNT     :      Content: c_de_steel O2 DE 30-06-09 RM-443 (c) Nokia              
Product SN   :     KMI614508
Product code :     0587468
Base Prd.code:     0575069
Module code  :     0204282
Long Prod.SN :     0
Hardware info=======
HWID  : 2001
Retu  : 15
Tahvo : 22
Batery: 3759 mV
Camera: 
CMT BT: 410B-v170
APE BT: 
APE HW: 
LCDVer: SHARP
RF ic : 
Lock info ===========
IMEI       : 356914038039766
IMEI spNet : 3A 65 19 04 83 30 79 06 
IMEI svNet : 33 65 19 04 83 30 79 26 F3 

Conf key     : 8000000000000000
Provider key : 2620700000000000
Provider    : O2 Deutschland (DCT3 Contract);Germany
Counters   : Key 0  [3] , Fbus 0  [10]
Blocks      : 2

LOCK STATUS :
=============================
BLK : 1
 Lock1:Open
BLK : 2
 Lock1:Open
=============================
LOCKS :  All Open
=============================
CRT308 Backup Created... :)

User Code : 12345
MMC pwd  : no any record found
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery] 

Done!

Phone disconected!

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info...  - Ok

Reading Phone Info....
Connected phone -    Nokia 6303 classic
Software ver : V 08.90 30-06-09 RM-443 (c) Nokia            
IMEI    :      356914038085405
Ape Ver :      
APE Var :      
APE ADSP:      
DSP Ver :       ICPR81_09w10_pre
APE Test:      
PPM     :      V 08.90 30-06-09 RM-443 (c) Nokia             C
CNT     :      Content: c_de_steel O2 DE 30-06-09 RM-443 (c) Nokia              
Product SN   :     KMI612906
Product code :     0587468
Base Prd.code:     0575069
Module code  :     0204282
Long Prod.SN :     0
Hardware info=======
HWID  : 2001
Retu  : 15
Tahvo : 22
Batery: 3725 mV
Camera: 
CMT BT: 410B-v170
APE BT: 
APE HW: 
LCDVer: SHARP
RF ic : 
Lock info ===========
IMEI       : 356914038085405
IMEI spNet : 3A 65 19 04 83 80 45 00 
IMEI svNet : 33 65 19 04 83 80 45 20 F3 

Conf key     : 8000000000000000
Provider key : 2620700000000000
Provider    : O2 Deutschland (DCT3 Contract);Germany
Counters   : Key 0  [3] , Fbus 0  [10]
Blocks      : 2

LOCK STATUS :
=============================
BLK : 1
 Lock1:Close
BLK : 2
 Lock1:Close
=============================
LOCKS :  Closed
=============================
CRT308 Backup Created... :)

User Code : 12345
MMC pwd  : no any record found
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery] 

Done!

Using F-bus count...
Sending code 710412599305835 Level : 7 to SimLock Server...
Simlock Server Answer: Unlock code Accepted! :)
Done!


Reading Phone Info....
Connected phone -    Nokia 6303 classic
Software ver : V 08.90 30-06-09 RM-443 (c) Nokia            
IMEI    :      356914038085405
Ape Ver :      
APE Var :      
APE ADSP:      
DSP Ver :       ICPR81_09w10_pre
APE Test:      
PPM     :      V 08.90 30-06-09 RM-443 (c) Nokia             C
CNT     :      Content: c_de_steel O2 DE 30-06-09 RM-443 (c) Nokia              
Product SN   :     KMI612906
Product code :     0587468
Base Prd.code:     0575069
Module code  :     0204282
Long Prod.SN :     0
Hardware info=======
HWID  : 2001
Retu  : 15
Tahvo : 22
Batery: 3725 mV
Camera: 
CMT BT: 410B-v170
APE BT: 
APE HW: 
LCDVer: SHARP
RF ic : 
Lock info ===========
IMEI       : 356914038085405
IMEI spNet : 3A 65 19 04 83 80 45 00 
IMEI svNet : 33 65 19 04 83 80 45 20 F3 

Conf key     : 8000000000000000
Provider key : 2620700000000000
Provider    : O2 Deutschland (DCT3 Contract);Germany
Counters   : Key 0  [3] , Fbus 0  [10]
Blocks      : 2

LOCK STATUS :
=============================
BLK : 1
 Lock1:Open
BLK : 2
 Lock1:Open
=============================
LOCKS :  All Open
=============================
CRT308 Backup Created... :)

User Code : 12345
MMC pwd  : no any record found
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery] 

Done!

Phone disconected!

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info...  - Ok

BackUp UserData : [PhoneBook]
Generation mode : [S60]
Check phone mode...
Phone in RfInactive mode
Seting Test mode... wait...
Test mode set
SmartPhone algo initialise...
Setup data...
StartUp FileSystem...
Fsrun OK...
Detect Symbian OS Generation...
Detected: [Symbian OS 9.1/9.2] Phone!
Running : APE_TEST_SERVER,w23_07,(c)NMP
Found!
Will read 25 blocks...
Sorry, FS error : Phone not answer... :(
Error during read...

Error during read...

Read and Check phone data...
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info : 
CMT ASICID   : 000000030000022600010007600C192102011104
CMT EM0 ID  : 00000C34
CMT EM1 ID  : 00000C30
CMT PUB ID  : 253001081F6603448452361F49BCE582051C45F2
CMT MODE ID : 00
CMT R_HASH  : 25B977A055BE9B5DEC0C38A2A279C695
CMT ROM ID  : 3E273BF637BE26FA

CMT : Sending 2nd loader...
Use : RAPUv11_2nd.fg
CMT Loader sent, Boot Ok
MCU Configuration
FLASHID : 004000EC , CMT , NAND
CMT Flash ID : 004000EC < SAMSUNG [SEC] => KAT00F00RA [NAND]
FLCNT   : 00030000000000000000000000000000000000
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAPUv11_algo_xsr16.fg
CMT Algo sent
CMT PAPUB : 302023398943E01BE04F38DE05BC5497BDABC55D00
Transmission mode :  Dual (Ddr, TX2) 

Boot Done!

Init Service mode... Wait...

SimLock status : SimLock is Ok
Security status : Security is Ok

Done!

 BackUp UserData : [PhoneBook]
Generation mode : [S60]
Operating mode is OK, no need change...
SmartPhone algo initialise...
Setup data...
StartUp FileSystem...
Fsrun OK...
Detect Symbian OS Generation...
Detected: [Symbian OS 9.3/9.4] Phone!
Warning! Many [9.3] and [9.4] phones not supported now :(
Running : APE_TEST_SERVER,w03_09,(c)NMP
Found!
Will read 74 blocks...
Wrong packet chk at : 1024
Packet bricked, minor error...
Restarting Read Procedure....
Will read 74 blocks...
Wrong packet chk at : 1024
Packet bricked, minor error...
Restarting Read Procedure....
Will read 74 blocks...
Wrong packet chk at : 1024
Packet bricked, major error...
Restart phone and try again...
Error during read...

Error during read...

Connect phone on selected interface...

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm639__05.60.mcusw
PPM : rm639__05.60.ppm_cib
CNT : rm639__05.60.image_cib_059C134_004
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID:       000000030000022600010007600C192102031104
EM0 ID:        00001051
EM1 ID:        00001060
PUBLIC ID:     263002190FA70344173444BD5A147525FE40C356
ASIC MODE ID:  00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID:        E693EF0DAC22615B
Use RAPUv11_2nd.fg
Processing RAWLOADER...
FLIC : 003000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg
Boot Done! :)
TIME : Boot time : 00:00:01 
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
ADL: phone is in flash mode

Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 353764046098442
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Cert Read done!

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : C:\Program Files\InfinityBox\Best\Backup\Cert\353764046098442_CRT.rpl

   ===Flashing [MCU]===
Erase : Processing rm639__05.60.mcusw
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00 
Write : Processing rm639__05.60.mcusw
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [UPDAPP]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [DSP0]
CMT: Writing Hash CERT [MCUSW]
CMT: Writing Hash CERT [MCUSW1]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [ISA+DYNSW]
Total writen 263 blocks
TIME : Write time : 00:00:04 
MCU Write done
ADL: Request programm status
NAND status : 00000002 / 00000002 / 00000000

   ===Flashing [PPM]===
Erase : Processing rm639__05.60.ppm_cib
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00 
Write : Processing rm639__05.60.ppm_cib
Total writen 61 blocks
TIME : Write time : 00:00:01 
PPM Write done
ADL: Request programm status
NAND status : 00000002 / 00000002 / 00000000

   ===Flashing [CNT]===
Erase : Processing rm639__05.60.image_cib_059C134_004
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00 
Write : Processing rm639__05.60.image_cib_059C134_004
Total writen 261 blocks
TIME : Write time : 00:00:05 
CNT Write done
ADL: Request programm status
NAND status : 00000002 / 00000002 / 00000000

ADL: Close_Session
Content: 000300000000020000000200000000
ADL: Reboot

Flashing done!
Total flash time : 00:00:12
Reboot phone now...

Reading Phone Info....
Connected phone -   Nokia X3-02
Software Info:     V 05.60 06-10-10 RM-639 (c) Nokia            
IMEI:  353764046098442
PPM version :   V 05.60 06-10-10 RM-639 (c) Nokia             CIB
Product code:  0598079
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
FullFactorySet...OK!
ProductTuneSet...OK!
SwUpgradeSet...OK!
AfterFlash operations done... Reconnect, wait...
Done!

Elapsed: 00:00:41
Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info...  - Ok

Read and Check phone data...
----------------------
RAP_BOOT:  0B01010502010000
RAP_PUB:   194001019EA50052C11C321B6D9C799DA4A32268
CMT_ROOT:  479C6DDE3942E12C429C1D6ADED80371
RAP_PAPUB: 7DC72D3FDC552426A4479BC820097D304CFB6C15
----------------------
Live Test Ok!
----------------------
CMT Flash ID : 004000EC < SAMSUNG [SEC] => KAT00F00RA [NAND]
------------------------
SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security is Ok

Checking PA_SimLock Version
PA_SL3 phone detected...

Done!

Selected FlashSettings : FullFlash
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : RM-588_21.6.005_prd.core.C00
PPM : RM-588_21.6.005_prd.rofs2.V05
PPM2 : RM-588_21.6.005_C01_prd.rofs3.fpsx
CNT : RM-588_21.6.005_001_000_U001.uda.fpsx
Flashing phone now...
Check files done...
->  Check SW version...
FlashFile version : 21.6.005
Phone version : V 21.0.004
->  Check SW version : Upgrade
Backup CRT308 data...
CRT308 Backup Created... :)
SimLock Data saved...
SimLock Key saved...
WMDRM_PD Data saved...

RPL saved : D:\GSM_Soft\BEST\Best\Backup\Cert\3553************_SIM_2nd.rpl

Check communication with phone....
ADL req restart
Communication verify done... Preparing...
Gathering phone info...
Check communication with phone...
Reboot....
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID:       000000010000022600010006400C192101051103
EM0 ID:        00000296
EM1 ID:        00000B22
PUBLIC ID:     194001019EA50052C11C321B6D9C799DA4A32268
ASIC MODE ID:  00
ROOT KEY HASH: 479C6DDE3942E12C429C1D6ADED80371
ROM ID:        4B9B75103E691FF8
PatchRAWLoader: Patched OK
Processing RAWLOADER...
Processing UPDAPP...
Processing UPDAPP...
Processing PAPUBKEYS...
Processing UPDAPP...
Boot Done! :)
TIME : Boot time : 00:00:03
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
Waiting for response: 28
Waiting for response: 27
ADL -> [2nd] changing...
ADL Server confirm flashmode!
ADL : Auth done...
ADL : ASIC CMT select Ok
   ===Flashing [MCU]===
Erase : Processing RM-588_21.6.005_prd.core.C00
Found 4 areas to erase
Erasing area 0x00040000 - 0x00082FFF, NAND, CMT
Result: 0000
Erasing area 0x00083400 - 0x003FFFFF, NAND, CMT
Result: 0000
Erasing area 0x00800000 - 0x00D5FFFF, NAND, CMT
Result: 0000
Erasing area 0x00D60000 - 0x09E5FFFF, NAND, CMT
Result: 0000
Erase partition 0x0A
Partition erase Ok
Partitioning : Ok [5]
TIME : Erase time : 00:00:00
Write : Processing RM-588_21.6.005_prd.core.C00
Total 428 [428/0/0] blocks to write, writing... 
CMT : Writing Hash CERT [ADA]
CMT : Writing Hash CERT [KEYS]
CMT : Writing Hash CERT [PRIMAPP]
CMT : Writing Hash CERT [RAP3NAND]
CMT : Writing Hash CERT [PASUBTOC]
CMT : Writing Hash CERT [PAPUBKEYS]
CMT : Writing Hash CERT [SOS*UPDAPP]
CMT : Writing Hash CERT [SOS*DSP0]
CMT : Writing Hash CERT [SOS*ISASW]
CMT : Writing Hash CERT [SOS+CORE]
CMT : Writing Hash CERT [SOS+ROFS1]
TIME : Write time : 00:00:29
MCU Write done
   ===Flashing [PPM]===
Erase : Processing RM-588_21.6.005_prd.rofs2.V05
Found 1 areas to erase
Erasing area 0x06AA0000 - 0x0915FFFF, NAND, CMT
Result: 0000
TIME : Erase time : 00:00:00
Write : Processing RM-588_21.6.005_prd.rofs2.V05
Total 112 [112/0/0] blocks to write, writing... 
CMT : Writing Hash CERT [SOS+ROFS2]
TIME : Write time : 00:00:08
PPM Write done
   ===Flashing [PPM2]===
Erase : Processing RM-588_21.6.005_C01_prd.rofs3.fpsx
Found 1 areas to erase
Erasing area 0x09160000 - 0x09E5FFFF, NAND, CMT
Result: 0000
TIME : Erase time : 00:00:00
Write : Processing RM-588_21.6.005_C01_prd.rofs3.fpsx
Total 28 [28/0/0] blocks to write, writing... 
CMT : Writing Hash CERT [SOS+ROFS3]
TIME : Write time : 00:00:01
PPM Write done
   ===Flashing [CNT]===
Erase : Processing RM-588_21.6.005_001_000_U001.uda.fpsx
Found 1 areas to erase
Erasing area 0x09E60000 - 0x0F47FFFF, NAND, CMT
Result: 0000
TIME : Erase time : 00:00:00
Write : Processing RM-588_21.6.005_001_000_U001.uda.fpsx
Total 23 [23/0/0] blocks to write, writing... 
TIME : Write time : 00:00:01
CNT Write done
 =================
ADL : End flashing
ADL : Finalize...

Flashing done!
Total flash time : 00:00:42
Reboot phone now...

Reading Phone Info....
Connected phone -   Nokia 5230
Software Info:     V ICPR72_10w21 26-05-10 RM-588 (c) Nokia
IMEI:  355396***********
Ape Version: V 21.6.005
Product code:  05999B7
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
FullFactorySet...OK!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Product code update...
Set phone to Normal mode...
AfterFlash operations done...
Done!

Elapsed: 00:01:18
Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info...  - Ok

Phone found!
Series 60 Device detected!
read info...  - Ok

Repair SD procedure started...

Phone Imei: 358641011135539
Key file exists, no need to read...
Check phone mode...
Phone in Normal mode
Seting Test mode... wait...
Test mode set
Writing Super Dongle Key...   Ok!
Done!

registered to: PANsoft

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info...  - Ok

Check phone mode...
Phone in Normal mode
Seting Local mode... wait...
Local mode set

Field 1
   Record 0 write - Error
   Record 1 write - Error
   Record 2 write - Error
   Record 4 write - Error
   Record 5 write - Error
   Record 6 write - Error
   Record 8 write - Error
   Record 13 write - Error
   Record 15 write - Error
   Record 16 write - Error
   Record 18 write - Error
   Record 20 write - Error
   Record 22 write - Error
   Record 23 write - Error
   Record 24 write - Error
   Record 25 write - Error
   Record 26 write - Error
   Record 27 write - Error
   Record 28 write - Error
   Record 29 write - Error
   Record 31 write - Error
   Record 33 write - Error
   Record 34 write - Error
   Record 40 write - Error
   Record 41 write - Error
   Record 42 write - Error
   Record 43 write - Error
   Record 44 write - Error
   Record 46 write - Error
Field 309
   Record 0 write - Error
   Record 1 write - Error
   Record 2 write - Error
   Record 4 write - Error
   Record 5 write - Error
   Record 7 write - Error
   Record 8 write - Error
   Record 17 write - Error

Done!

Elapsed: 00:00:08

Local SX4 procedure started...

Phone Imei: 358641011135539
Key file exists, no need to read...
Step 1...
Step 2...
Step 3...
SX4 Auth - Ok
Done!

Operating mode is OK, no need change...

Field 1
   Record 0 write - Ok
   Record 1 write - Ok
   Record 2 write - Ok
   Record 4 write - Ok
   Record 5 write - Ok
   Record 6 write - Ok
   Record 8 write - Ok
   Record 13 write - Ok
   Record 15 write - Ok
   Record 16 write - Ok
   Record 18 write - Ok
   Record 20 write - Ok
   Record 22 write - Ok
   Record 23 write - Ok
   Record 24 write - Ok
   Record 25 write - Ok
   Record 26 write - Ok
   Record 27 write - Ok
   Record 28 write - Ok
   Record 29 write - Ok
   Record 31 write - Ok
   Record 33 write - Ok
   Record 34 write - Ok
   Record 40 write - Ok
   Record 41 write - Ok
   Record 42 write - Ok
   Record 43 write - Ok
   Record 44 write - Ok
   Record 46 write - Ok
Field 309
   Record 0 write - Ok
   Record 1 write - Ok
   Record 2 write - Ok
   Record 4 write - Ok
   Record 5 write - Ok
   Record 7 write - Ok
   Record 8 write - Ok
   Record 17 write - Ok

Done!

Elapsed: 00:00:00

Reading Phone Info....
Connected phone -    Nokia 5800 XpressMusic
Software ver : V ICPR72_10w25.3 11-10-10 RM-356 (c) Nokia
IMEI    :      354183026896569
Ape Ver :      V 52.0.007
APE Var :      V 52.0.007V 52.0.007 V 52.0.007 
APE ADSP:      256
DSP Ver :       ICPR72_10w16
APE Test:      eno_version
PPM     :      
CNT     :      v 50.2010.06.1_001_000_U01 17-03-10 vanilla RM356
Product SN   :     C7B594727
Product code :     0559237
Base Prd.code:     0558954
Module code  :     
Long Prod.SN :     0
Hardware info=======
HWID  : 1101
Retu  : 16
Tahvo : 22
Batery: 4433 mV
Camera: 
CMT BT: 
APE BT: 
APE HW: 256
LCDVer: 
RF ic : 
Lock info ===========
IMEI       : 354183026896569
IMEI spNet : 3A 45 81 03 62 98 56 06 
IMEI svNet : 33 45 81 03 62 98 56 76 F0 

Conf key     : 0000000000000000
Provider key : 2440700000000000
Provider    : AT&T;U.S.A. (3650)
Counters   : Key 0  [3] , Fbus 0  [10]
Blocks      : 7

LOCK STATUS :
=============================
BLK : 1
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS :  All Open
=============================
CRT308 Backup Created... :)

User code : Crypted
UserDataExLevel : Low [Gallery] 

Done!

Read and Check phone data...
----------------------
RAP_BOOT:  0B01010302010000
RAP_PUB:   2020010C0B720052066FC5E41393A5D937A6114A
CMT_ROOT:  CAEEBB65D3C48E6DC73B49DC5063A2EE
RAP_PAPUB: 76A20187051C30162EE91C77AE5E6011F5F1BA61
----------------------
Live Test Ok!
----------------------
CMT Flash ID : 004000EC < SAMSUNG [SEC] => KAT00F00RA [NAND]
------------------------
SDD Key status : SDData Damaged!!!!! :(
SimLock status : SimLock is Ok
Security status : Security is Ok

Checking PA_SimLock Version
PA_SL2 phone detected

Done!

Repair SD procedure started...

Phone Imei: 354183026896569
Key file exists, no need to read...
Check phone mode...
Phone in Local mode
Seting Test mode... wait...
Test mode set
Writing Super Dongle Key...   Ok!
Done!

Read and Check phone data...
----------------------
RAP_BOOT:  0B01010302010000
RAP_PUB:   2020010C0B720052066FC5E41393A5D937A6114A
CMT_ROOT:  CAEEBB65D3C48E6DC73B49DC5063A2EE
RAP_PAPUB: 76A20187051C30162EE91C77AE5E6011F5F1BA61
----------------------
Live Test Ok!
----------------------
CMT Flash ID : 004000EC < SAMSUNG [SEC] => KAT00F00RA [NAND]
------------------------
SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security is Ok

Checking PA_SimLock Version
PA_SL2 phone detected

Done!

Local SX4 procedure started...

Phone Imei: 354183026896569
Use custom key...
Step 1...
Step 2...
Step 3...
SX4 Auth - Ok
Done!

Phone disconected!

Connect phone on selected interface...