[Вопрос] Nokia X3-02 не прошивается до конца.

Новое

clifford_umc
Участник

Сообщений:: 1,604

Регистрация:: 25.09.2006

Возраст:: 48

Рейтинг мнений: 484

Вес репутации: 344

Nokia X3-02 не прошивается до конца. #1

Код:

Connect phone on selected interface...

User ACCEPTED FULL ERASE
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Can't verify Bootrom :( Try again...
->  Error answer from BootRom
Looks like ASIC not supported, or HW failure
Supported : RapuYama, RAP3Gv4, BroadComm

User ACCEPTED FULL ERASE
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID:       000000030000022600010007600C192102031104
CPU ID :       RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00001051
EM1 ID:        00001060
PUBLIC ID:     0ED0010DA31300492CF025BFB3E1EFCFEFEA345F
ASIC MODE ID:  00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID:        E693EF0DAC22615B
Use RAPUv11_2nd.fg  ,  Rev : 3.0  Ver : 11.34.0 
Processing RAWLOADER...
FLIC : 003000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg  ,  Rev : 3.0  Ver : 11.34.0 
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:13 
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
Waiting for response: 28
Waiting for response: 27
Waiting for response: 26
Waiting for response: 25
Waiting for response: 24
Waiting for response: 23
Waiting for response: 22
Waiting for response: 21
Waiting for response: 20
Waiting for response: 19
Waiting for response: 18
Waiting for response: 17
Waiting for response: 16
Waiting for response: 15
Waiting for response: 14
Waiting for response: 13
Waiting for response: 12
Waiting for response: 11
Waiting for response: 10
Waiting for response: 9
Waiting for response: 8
Waiting for response: 7
Waiting for response: 6
Waiting for response: 5
Waiting for response: 4
Waiting for response: 3
Waiting for response: 2
Waiting for response: 1
Phone not found... :(

Phone disconected!

Connect phone on selected interface...

User ACCEPTED FULL ERASE
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID:       000000030000022600010007600C192102031104
CPU ID :       RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00001051
EM1 ID:        00001060
PUBLIC ID:     0ED0010DA31300492CF025BFB3E1EFCFEFEA345F
ASIC MODE ID:  00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID:        E693EF0DAC22615B
Use RAPUv11_2nd.fg  ,  Rev : 3.0  Ver : 11.34.0 
Processing RAWLOADER...
FLIC : 003000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg  ,  Rev : 3.0  Ver : 11.34.0 
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:07 
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : 23B57C26A0C7A9C34544727AA1D2FC8F3265329C
ADL: Preparing for erase...

Full Erase started...
Asic : CMT , Sub : NAND
Erase Area 0x00000000-0x07FFFFFF
Erasing Ok , [0F]
Erase done , time : 00:00:00 

ADL: Erase done

ADL: Close_Session
Content: 000205000000000000FFFF00000000
ADL: Reboot
Phone disconected!

Connect phone on selected interface...

Core version : 1.30  Rev : 1.1

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm639__06.00.mcusw
PPM : rm639__06.00.ppm_i
CNT : rm639__06.00.image_i_0598322_006
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Can't verify Bootrom :( Try again...
->  Error answer from BootRom
->  Boot fail...
    Flashing failed...

Core version : 1.30  Rev : 1.1

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm639__06.00.mcusw
PPM : rm639__06.00.ppm_i
CNT : rm639__06.00.image_i_0598322_006
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Can't verify Bootrom :( Try again...
->  Error answer from BootRom
->  Boot fail...
    Flashing failed...

Core version : 1.30  Rev : 1.1

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm639__06.00.mcusw
PPM : rm639__06.00.ppm_i
CNT : rm639__06.00.image_i_0598322_006
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Can't verify Bootrom :( Try again...
->  Error answer from BootRom
->  Boot fail...
    Flashing failed...

Core version : 1.30  Rev : 1.1

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm639__06.00.mcusw
PPM : rm639__06.00.ppm_i
CNT : rm639__06.00.image_i_0598322_006
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID:       000000030000022600010007600C192102031104
CPU ID :       RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00001051
EM1 ID:        00001060
PUBLIC ID:     0ED0010DA31300492CF025BFB3E1EFCFEFEA345F
ASIC MODE ID:  00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID:        E693EF0DAC22615B
Use RAPUv11_2nd.fg  ,  Rev : 3.0  Ver : 11.34.0 
Processing RAWLOADER...
FLIC : 003000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg  ,  Rev : 3.0  Ver : 11.34.0 
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:07 
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : blank (Erased or HW failure)
ADL: phone is in flash mode
   ===Flashing [MCU]===
Erase : Processing rm639__06.00.mcusw
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01 
Write : Processing rm639__06.00.mcusw
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [UPDAPP]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [DSP0]
CMT: Writing Hash CERT [MCUSW]
CMT: Writing Hash CERT [MCUSW1]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [ISA+DYNSW]
Total writen 264 blocks
TIME : Write time : 00:00:07 
MCU Write done
ADL: Request programm status
NAND status : 00000002 / 00000002 / 00000000

   ===Flashing [PPM]===
Erase : Processing rm639__06.00.ppm_i
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00 
Write : Processing rm639__06.00.ppm_i
Total writen 61 blocks
TIME : Write time : 00:00:03 
PPM Write done
ADL: Request programm status
NAND status : 00000002 / 00000002 / 00000000

   ===Flashing [CNT]===
Erase : Processing rm639__06.00.image_i_0598322_006
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:03 
Write : Processing rm639__06.00.image_i_0598322_006
Total writen 260 blocks
TIME : Write time : 00:00:05 
CNT Write done
ADL: Request programm status
NAND status : 00000002 / 00000002 / 00000000

ADL: Close_Session
Content: 000300000000020000000200000000
ADL: Reboot

Flashing done!
Total flash time : 00:00:21
Reboot phone now...

-------AFTER FLASH BREAKED BY USER-------

 - > AfterFlash Failed! :( Reason : Downgrade try or HW Error
     Anyway - try reinsert battery and PowerUp phone manualy

Connect phone on selected interface...

Done!

Elapsed: 00:02:24
Connect phone on selected interface...

Will Write CCC/HWC keys now...

Using : RM-639.rpl
CCC Data found!
HWC Data found!

Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID:       000000030000022600010007600C192102031104
CPU ID :       RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00001051
EM1 ID:        00001060
PUBLIC ID:     0ED0010DA31300492CF025BFB3E1EFCFEFEA345F
ASIC MODE ID:  00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID:        E693EF0DAC22615B
Use RAPUv11_2nd.fg  ,  Rev : 3.0  Ver : 11.34.0 
Processing RAWLOADER...
FLIC : 003000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg  ,  Rev : 3.0  Ver : 11.34.0 
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:06 
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : 23B57C26A0C7A9C34544727AA1D2FC8F3265329C
ADL: Preparing for write certificates...

Erase CCC... Ok
Writing CCC... Ok
Erase HWC... Ok
Writing HWC... Ok

ADL: Writing Flash certs done! :)

ADL: Close_Session
Content: 000300000000020000000200000000
ADL: Reboot
All done, disconneting...

Done!

Elapsed: 00:00:27

Connect phone on selected interface...

Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
SimLock Data found!
SimLock key found!
SuperDongle Key found!
WMDRM key found!
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID:       000000030000022600010007600C192102031104
CPU ID :       RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00001051
EM1 ID:        00001060
PUBLIC ID:     0ED0010DA31300492CF025BFB3E1EFCFEFEA345F
ASIC MODE ID:  00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID:        E693EF0DAC22615B
Use RAPUv11_2nd.fg  ,  Rev : 3.0  Ver : 11.34.0 
Processing RAWLOADER...
FLIC : 003000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg  ,  Rev : 3.0  Ver : 11.34.0 
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:06 
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : 23B57C26A0C7A9C34544727AA1D2FC8F3265329C
ADL: Preparing for write certificates...

Erase NPC... Ok
Writing NPC... Ok
Erase CCC... Ok
Writing CCC... Ok
Erase HWC... Ok
Writing HWC... Ok

ADL: Writing Flash certs done! :)

ADL: Close_Session
Content: 000300000000020000000200000000
ADL: Reboot
Wait, reconneting...
Phone not found... :(
CertWrite failed : phone was not bootup
Connection/SW/HW problem, try bootup manually
If phone bootup Ok - write only flex keys

Phone disconected!

Connect phone on selected interface...

Core version : 1.30  Rev : 1.1

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm639__07.15.mcusw
PPM : rm639__07.15.ppm_e
CNT : rm639__07.15_006.image_e_ctv_ee_9d5g8
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID:       000000030000022600010007600C192102031104
CPU ID :       RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00001051
EM1 ID:        00001060
PUBLIC ID:     0ED0010DA31300492CF025BFB3E1EFCFEFEA345F
ASIC MODE ID:  00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID:        E693EF0DAC22615B
Use RAPUv11_2nd.fg  ,  Rev : 3.0  Ver : 11.34.0 
Processing RAWLOADER...
FLIC : 003000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg  ,  Rev : 3.0  Ver : 11.34.0 
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:05 
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : 23B57C26A0C7A9C34544727AA1D2FC8F3265329C
ADL: phone is in flash mode
   ===Flashing [MCU]===
Erase : Processing rm639__07.15.mcusw
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00 
Write : Processing rm639__07.15.mcusw
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [UPDAPP]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [DSP0]
CMT: Writing Hash CERT [MCUSW]
CMT: Writing Hash CERT [MCUSW1]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [ISA+DYNSW]
Total writen 264 blocks
TIME : Write time : 00:00:06 
MCU Write done
ADL: Request programm status
NAND status : 00000002 / 00000002 / 00000000

   ===Flashing [PPM]===
Erase : Processing rm639__07.15.ppm_e
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:05 
Write : Processing rm639__07.15.ppm_e
Total writen 62 blocks
TIME : Write time : 00:00:02 
PPM Write done
ADL: Request programm status
NAND status : 00000002 / 00000002 / 00000000

   ===Flashing [CNT]===
Erase : Processing rm639__07.15_006.image_e_ctv_ee_9d5g8
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01 
Write : Processing rm639__07.15_006.image_e_ctv_ee_9d5g8
Total writen 262 blocks
TIME : Write time : 00:00:06 
CNT Write done
ADL: Request programm status
NAND status : 00000002 / 00000002 / 00000000

ADL: Close_Session
Content: 000300000000020000000200000000
ADL: Reboot

Flashing done!
Total flash time : 00:00:23
Reboot phone now...

-------AFTER FLASH BREAKED BY USER-------

 - > AfterFlash Failed! :( Reason : Downgrade try or HW Error
     Anyway - try reinsert battery and PowerUp phone manualy

Connect phone on selected interface...

Done!

Elapsed: 00:02:04
Connect phone on selected interface...

В результе моргает просто подсветкой. До начала операций с заливкой rpl телефон включался но с дефолтным imei. Есть ли вариант чтобы хотя бы вернуть его в предыдущее состояние.

Последний раз редактировалось clifford_umc; 08.12.2011 в 19:00.

08.12.2011, 18:50

Новое

Joker
Забанен

Сообщений:: 190

Регистрация:: 27.05.2008

Возраст:: 43

Рейтинг мнений: -88

Вес репутации: 0

Re: Nokia X3-02 не прошивается до конца. #2

попадались такие моргалики и помогала пропайка/перекатка проц-флешь

08.12.2011, 19:47

Новое

chabrus
MCRF Инженер

Сообщений:: 866

Регистрация:: 30.11.2009

Возраст:: 42

Рейтинг мнений: 2510

Вес репутации: 542

Re: Nokia X3-02 не прошивается до конца. #3

Цитата:

Сообщение от clifford_umc

До начала операций с заливкой rpl телефон включался но с дефолтным imei. Есть ли вариант чтобы хотя бы вернуть его в предыдущее состояние.

В имеете ввиду, что тело после стирания и прошивки завелось, а после заливки бекапа стало моргать?

08.12.2011, 20:04

Новое

uo5oq
MCRF Инженер

Сообщений:: 4,787

Регистрация:: 21.07.2005

Рейтинг мнений: 3661

Вес репутации: 1364

Re: Nokia X3-02 не прошивается до конца. #4

Цитата:

Сообщение от clifford_umc

...В результе моргает просто подсветкой. До начала операций с заливкой rpl телефон включался но с дефолтным imei. Есть ли вариант чтобы хотя бы вернуть его в предыдущее состояние.

Легко вернуть. Просто сотрите его и запишите SW. Очень возможно, что после полного стирания он запишется до конца.
Так же имеет смысл сделать ему лёгкую "восьмёрку" перед прошивкой SW.

__________________
Разблокировка iPhone, NCK Коды, Логи и Активации для GSM Боксов и программ на www.UO5OQ.com

08.12.2011, 20:35

Новое

clifford_umc
Участник

Сообщений:: 1,604

Регистрация:: 25.09.2006

Возраст:: 48

Рейтинг мнений: 484

Вес репутации: 344

Re: Nokia X3-02 не прошивается до конца. #5

Нет из лога видно что без разницы ни до заливки rpl ни после тело не переходит ни в test ни в local mode. Шью только по usb, ибо fbus кабеля нету.
P.S. Тело rm-639 сертифицировано для Украины.

Добавлено через 1 минуту

Цитата:

Сообщение от uo5oq

Легко вернуть. Просто сотрите его и запишите SW. Очень возможно, что после полного стирания он запишется до конца.
Так же имеет смысл сделать ему лёгкую "восьмёрку" перед прошивкой SW.

Да я уже раз 50 стирал и записывал его. Пререпробовал все версии прошивки для етой модели, а результат 0.

08.12.2011, 20:38

Новое

chabrus
MCRF Инженер

Сообщений:: 866

Регистрация:: 30.11.2009

Возраст:: 42

Рейтинг мнений: 2510

Вес репутации: 542

Re: Nokia X3-02 не прошивается до конца. #6

Если аппарат исправен по железу, то после стирания и прошивки, должен бть локал.
Если тело перестало включаться после первого программного вмешательства, то имеет смысл, присмотреться к посту N2.

ОФФтопик:

Вспомните случаи с 6700, когда приходилось пропаивать проц, чтоб они запускались после прошивки.

08.12.2011, 20:44

Новое

Bodirog
MCRF Инженер

Сообщений:: 610

Регистрация:: 05.02.2006

Возраст:: 43

Рейтинг мнений: 886

Вес репутации: 392

Re: Nokia X3-02 не прошивается до конца. #7

Может кому-то и покажется смешным, но был похожий С3-01, который без ЖКД прошился и зашел в локал, чем закончилось думаю все понимают. Проблема оказалась в дисплее. Вот такие вот они новые ТА Nokia. А вообще, похожие ТА всегда стараюсь разбирать и прошивать голые платы во избежания "странных" поломок.

Последний раз редактировалось Bodirog; 08.12.2011 в 21:21.

08.12.2011, 21:17

5 пользователя(ей) добавили плюсы

AABBCC (12.12.2011), aziz (10.12.2011), chabrus (09.12.2011), clifford_umc (09.12.2011), uo5oq (09.12.2011)

Новое

clifford_umc
Участник

Сообщений:: 1,604

Регистрация:: 25.09.2006

Возраст:: 48

Рейтинг мнений: 484

Вес репутации: 344

Re: Nokia X3-02 не прошивается до конца. #8

Нда удеса да и только, вот лог тела без дисплея и клавиатуры

Код:

Connect phone on selected interface...

Core version : 1.30  Rev : 1.1

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm639__07.15.mcusw
PPM : rm639__07.15.ppm_e
CNT : rm639__07.15_006.image_e_ctv_ee_9d5g8
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
->  Phone not found.. :(
->  Boot fail...
    Flashing failed...

Core version : 1.30  Rev : 1.1

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm639__07.15.mcusw
PPM : rm639__07.15.ppm_e
CNT : rm639__07.15_006.image_e_ctv_ee_9d5g8
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID:       000000030000022600010007600C192102031104
CPU ID :       RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00001051
EM1 ID:        00001060
PUBLIC ID:     0ED0010DA31300492CF025BFB3E1EFCFEFEA345F
ASIC MODE ID:  00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID:        E693EF0DAC22615B
Use RAPUv11_2nd.fg  ,  Rev : 3.0  Ver : 11.34.0 
Processing RAWLOADER...
2nd boot not accepted... Alive Request not done :(
Boot error... :(

->  Boot fail...
    Flashing failed...

Phone disconected!

Connect phone on selected interface...

Core version : 1.30  Rev : 1.1

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm639__07.15.mcusw
PPM : rm639__07.15.ppm_e
CNT : rm639__07.15_006.image_e_ctv_ee_9d5g8
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID:       000000030000022600010007600C192102031104
CPU ID :       RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00001051
EM1 ID:        00001060
PUBLIC ID:     0ED0010DA31300492CF025BFB3E1EFCFEFEA345F
ASIC MODE ID:  00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID:        E693EF0DAC22615B
Use RAPUv11_2nd.fg  ,  Rev : 3.0  Ver : 11.34.0 
Processing RAWLOADER...
2nd boot not accepted... Alive Request not done :(
Boot error... :(

->  Boot fail...
    Flashing failed...

Phone disconected!

Connect phone on selected interface...

Core version : 1.30  Rev : 1.1

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm639__07.15.mcusw
PPM : rm639__07.15.ppm_e
CNT : rm639__07.15_006.image_e_ctv_ee_9d5g8
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
->  Phone not found.. :(
->  Boot fail...
    Flashing failed...

Core version : 1.30  Rev : 1.1

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm639__07.15.mcusw
PPM : rm639__07.15.ppm_e
CNT : rm639__07.15_006.image_e_ctv_ee_9d5g8
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID:       000000030000022600010007600C192102031104
CPU ID :       RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00001051
EM1 ID:        00001060
PUBLIC ID:     0ED0010DA31300492CF025BFB3E1EFCFEFEA345F
ASIC MODE ID:  00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID:        E693EF0DAC22615B
Use RAPUv11_2nd.fg  ,  Rev : 3.0  Ver : 11.34.0 
Processing RAWLOADER...
FLIC : 003000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg  ,  Rev : 3.0  Ver : 11.34.0 
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:08 
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
Waiting for response: 28
Waiting for response: 27
Waiting for response: 26
Waiting for response: 25
Waiting for response: 24
Waiting for response: 23
Waiting for response: 22
Waiting for response: 21
Waiting for response: 20
Waiting for response: 19
Waiting for response: 18
Waiting for response: 17
Waiting for response: 16
Waiting for response: 15
Waiting for response: 14
Waiting for response: 13
Waiting for response: 12
Waiting for response: 11
Waiting for response: 10
Waiting for response: 9
Waiting for response: 8
Waiting for response: 7
Waiting for response: 6
Waiting for response: 5
Waiting for response: 4
Waiting for response: 3
Waiting for response: 2
Waiting for response: 1
Phone not found... :(

Elapsed: 00:00:00
Connect phone on selected interface...

Core version : 1.30  Rev : 1.1

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm639__07.15.mcusw
PPM : rm639__07.15.ppm_e
CNT : rm639__07.15_006.image_e_ctv_ee_9d5g8
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID:       000000030000022600010007600C192102031104
CPU ID :       RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00001051
EM1 ID:        00001060
PUBLIC ID:     0ED0010DA31300492CF025BFB3E1EFCFEFEA345F
ASIC MODE ID:  00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID:        E693EF0DAC22615B
Use RAPUv11_2nd.fg  ,  Rev : 3.0  Ver : 11.34.0 
Processing RAWLOADER...
FLIC : 003000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg  ,  Rev : 3.0  Ver : 11.34.0 
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:08 
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
Waiting for response: 28
Waiting for response: 27
Waiting for response: 26
Waiting for response: 25
Waiting for response: 24
Waiting for response: 23
Waiting for response: 22
Waiting for response: 21
Waiting for response: 20
Waiting for response: 19
Waiting for response: 18
Waiting for response: 17
Waiting for response: 16
Waiting for response: 15
Waiting for response: 14
Waiting for response: 13
Waiting for response: 12
Waiting for response: 11
Waiting for response: 10
Waiting for response: 9
Waiting for response: 8
Waiting for response: 7
Waiting for response: 6
Waiting for response: 5
Waiting for response: 4
Waiting for response: 3
Waiting for response: 2
Waiting for response: 1
Phone not found... :(

Elapsed: 00:00:00
Connect phone on selected interface...

Core version : 1.30  Rev : 1.1

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm639__07.15.mcusw
PPM : rm639__07.15.ppm_e
CNT : rm639__07.15_006.image_e_ctv_ee_9d5g8
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID:       000000030000022600010007600C192102031104
CPU ID :       RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00001051
EM1 ID:        00001060
PUBLIC ID:     0ED0010DA31300492CF025BFB3E1EFCFEFEA345F
ASIC MODE ID:  00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID:        E693EF0DAC22615B
Use RAPUv11_2nd.fg  ,  Rev : 3.0  Ver : 11.34.0 
Processing RAWLOADER...
FLIC : 003000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg  ,  Rev : 3.0  Ver : 11.34.0 
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:07 
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : 23B57C26A0C7A9C34544727AA1D2FC8F3265329C
ADL: phone is in flash mode
   ===Flashing [MCU]===
Erase : Processing rm639__07.15.mcusw
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01 
Write : Processing rm639__07.15.mcusw
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [UPDAPP]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [DSP0]
CMT: Writing Hash CERT [MCUSW]
CMT: Writing Hash CERT [MCUSW1]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [ISA+DYNSW]
Total writen 264 blocks
TIME : Write time : 00:00:08 
MCU Write done
ADL: Request programm status
NAND status : 00000002 / 00000002 / 00000000

   ===Flashing [PPM]===
Erase : Processing rm639__07.15.ppm_e
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00 
Write : Processing rm639__07.15.ppm_e
Total writen 62 blocks
TIME : Write time : 00:00:07 
PPM Write done
ADL: Request programm status
NAND status : 00000002 / 00000002 / 00000000

   ===Flashing [CNT]===
Erase : Processing rm639__07.15_006.image_e_ctv_ee_9d5g8
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:02 
Write : Processing rm639__07.15_006.image_e_ctv_ee_9d5g8
Total writen 262 blocks
TIME : Write time : 00:00:07 
CNT Write done
ADL: Request programm status
NAND status : 00000002 / 00000002 / 00000000

ADL: Close_Session
Content: 000300000000020000000200000000
ADL: Reboot

Flashing done!
Total flash time : 00:00:27
Reboot phone now...

Reading Phone Info....
Connected phone -   Nokia X3-02
Software Info:     V 07.15 07-10-11 RM-639 (c) Nokia            
IMEI:  353764042946586
PPM version :   V 07.15 07-10-11 RM-639 (c) Nokia             E
Product code:  
Checking...
SimLock status : SimLock Damaged!!!!! :(
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
Error When resetting FullFactory :( ...
Error When resetting Product Tune :( ...
Error When resetting SW upgrade Default :( ...
AfterFlash operations done ;D
Done!

Elapsed: 00:01:39
Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info...  - Ok

Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
SimLock Data found!
SimLock key found!
SuperDongle Key found!
WMDRM key found!
-> Skip Flash keys Part, for Flash Part use Dead Mode or Fbus

Writing SimLock Key...   Ok!
Writing SimLock Data...  Ok!
Writing Super Dongle Key...   Ok!

SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!! :(

WMDRM_PD key sent... Ok

Done!

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info...  - Ok

Checking StartUp data ...
-----------------------
SDD Key status : SDData is Ok
SimLock status : SimLock is Ok

Security status : Security Damaged!!!!! :(
 - > Do Local SX4 or Server SX4 , Upload Tune ( checkbox or manual )

-----------------------

PA_SimLock Version : 
PA_SL30 phone detected ,  SP_CODE_LEN : 20 

Done!

Repair SD procedure started...

Phone Imei: 353764042946586

 - >  Power Off phone, dissconnect it and connect

Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID:       000000030000022600010007600C192102031104
CPU ID :       RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
PUBLIC ID:     0ED0010DA31300492CF025BFB3E1EFCFEFEA345F
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
Fetching data, wait...

 - > Reinsert cable and battery, press powerOn button again
 - > For X7, E7 - just waiting, near 1 minute
 - > When BEST start Search Phone - Press PowerOn if needed

Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID:       000000030000022600010007600C192102031104
CPU ID :       RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00001051
EM1 ID:        00001060
PUBLIC ID:     0ED0010DA31300492CF025BFB3E1EFCFEFEA345F
ASIC MODE ID:  00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID:        E693EF0DAC22615B
Use RAPUv11_2nd.fg  ,  Rev : 3.0  Ver : 11.34.0 
Processing RAWLOADER...
FLIC : 003000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg  ,  Rev : 3.0  Ver : 11.34.0 
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:20 
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
Waiting for response: 28
Waiting for response: 27
Waiting for response: 26
Waiting for response: 25
Waiting for response: 24
Waiting for response: 23
Waiting for response: 22
Waiting for response: 21
Waiting for response: 20
Waiting for response: 19
Waiting for response: 18
Waiting for response: 17
Waiting for response: 16
Waiting for response: 15
Waiting for response: 14
Waiting for response: 13
Waiting for response: 12
Waiting for response: 11
Waiting for response: 10
Waiting for response: 9
Waiting for response: 8
Waiting for response: 7
Waiting for response: 6
Waiting for response: 5
Waiting for response: 4
Waiting for response: 3
Waiting for response: 2
Waiting for response: 1
Phone not found... :(

Error, phone reboot not done #2 (Phone was not BootUp)

rap= 0ED0010DA31300492CF025BFB3E1EFCFEFEA345F
hash= 916F75217F32081248B15C38DFC8E81B
key= D8DC10F0EF12BA0F87F8ADF81B1105FC13C1D370

 - > You can insert data in "special.log" manually
 - > Or repeat procedure again

UFSx error, reconnect and try again...
Repair fail...!

Phone disconected!

Connect phone on selected interface...

User ACCEPTED FULL ERASE
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID:       000000030000022600010007600C192102031104
CPU ID :       RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00001051
EM1 ID:        00001060
PUBLIC ID:     0ED0010DA31300492CF025BFB3E1EFCFEFEA345F
ASIC MODE ID:  00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID:        E693EF0DAC22615B
Use RAPUv11_2nd.fg  ,  Rev : 3.0  Ver : 11.34.0 
Processing RAWLOADER...
FLIC : 003000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg  ,  Rev : 3.0  Ver : 11.34.0 
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:09 
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
Waiting for response: 28
Waiting for response: 27
Waiting for response: 26
Waiting for response: 25
Waiting for response: 24
Waiting for response: 23
Waiting for response: 22
Waiting for response: 21
Waiting for response: 20
Waiting for response: 19
Waiting for response: 18
Waiting for response: 17
Waiting for response: 16
Waiting for response: 15
Waiting for response: 14
Waiting for response: 13
Waiting for response: 12
Waiting for response: 11
Waiting for response: 10
Waiting for response: 9
Waiting for response: 8
Waiting for response: 7
Waiting for response: 6
Waiting for response: 5
Waiting for response: 4
Waiting for response: 3
Waiting for response: 2
Waiting for response: 1
Phone not found... :(

Phone disconected!

Connect phone on selected interface...

User ACCEPTED FULL ERASE
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
->  Phone not found.. :(
Looks like ASIC not supported, or HW failure
Supported : RapuYama, RAP3Gv4, BroadComm

User ACCEPTED FULL ERASE
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID:       000000030000022600010007600C192102031104
CPU ID :       RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00001051
EM1 ID:        00001060
PUBLIC ID:     0ED0010DA31300492CF025BFB3E1EFCFEFEA345F
ASIC MODE ID:  00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID:        E693EF0DAC22615B
Use RAPUv11_2nd.fg  ,  Rev : 3.0  Ver : 11.34.0 
Processing RAWLOADER...
FLIC : 003000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg  ,  Rev : 3.0  Ver : 11.34.0 
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:07 
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : 23B57C26A0C7A9C34544727AA1D2FC8F3265329C
ADL: Preparing for erase...

Full Erase started...
Asic : CMT , Sub : NAND
Erase Area 0x00000000-0x07FFFFFF
Erasing Ok , [0F]
Erase done , time : 00:00:01 

ADL: Erase done

ADL: Close_Session
Content: 000205000000000000FFFF00000000
ADL: Reboot
Phone disconected!

Connect phone on selected interface...

Core version : 1.30  Rev : 1.1

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm639__06.00.mcusw
PPM : rm639__06.00.ppm_i
CNT : rm639__06.00.image_i_0598322_006
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID:       000000030000022600010007600C192102031104
CPU ID :       RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00001051
EM1 ID:        00001060
PUBLIC ID:     0ED0010DA31300492CF025BFB3E1EFCFEFEA345F
ASIC MODE ID:  00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID:        E693EF0DAC22615B
Use RAPUv11_2nd.fg  ,  Rev : 3.0  Ver : 11.34.0 
Processing RAWLOADER...
FLIC : 003000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg  ,  Rev : 3.0  Ver : 11.34.0 
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:07 
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : blank (Erased or HW failure)
ADL: phone is in flash mode
   ===Flashing [MCU]===
Erase : Processing rm639__06.00.mcusw
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01 
Write : Processing rm639__06.00.mcusw
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [UPDAPP]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [DSP0]
CMT: Writing Hash CERT [MCUSW]
CMT: Writing Hash CERT [MCUSW1]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [ISA+DYNSW]
Total writen 264 blocks
TIME : Write time : 00:00:15 
MCU Write done
ADL: Request programm status
NAND status : 00000002 / 00000002 / 00000000

   ===Flashing [PPM]===
Erase : Processing rm639__06.00.ppm_i
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00 
Write : Processing rm639__06.00.ppm_i
Total writen 61 blocks
TIME : Write time : 00:00:03 
PPM Write done
ADL: Request programm status
NAND status : 00000002 / 00000002 / 00000000

   ===Flashing [CNT]===
Erase : Processing rm639__06.00.image_i_0598322_006
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01 
Write : Processing rm639__06.00.image_i_0598322_006
Total writen 260 blocks
TIME : Write time : 00:00:09 
CNT Write done
ADL: Request programm status
NAND status : 00000002 / 00000002 / 00000000

ADL: Close_Session
Content: 000300000000020000000200000000
ADL: Reboot

Flashing done!
Total flash time : 00:00:31
Reboot phone now...

Reading Phone Info....
Connected phone -   Nokia X3-02
Software Info:     V 06.00 28-03-11 RM-639 (c) Nokia            
IMEI:  12345610654321?
PPM version :   V 06.00 28-03-11 RM-639 (c) Nokia             I
Product code:  
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
Error When resetting FullFactory :( ...
Error When resetting Product Tune :( ...
Error When resetting SW upgrade Default :( ...
Product code update...
AfterFlash operations done ;D
Done!

Elapsed: 00:01:41
Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info...  - Ok

Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
SimLock Data found!
SimLock key found!
SuperDongle Key found!
WMDRM key found!
-> Skip Flash keys Part, for Flash Part use Dead Mode or Fbus

Writing SimLock Key...   Ok!
Writing SimLock Data...  Ok!
Writing Super Dongle Key...   Ok!

SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!! :(

WMDRM_PD key sent... Ok

Done!

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info...  - Ok

Phone disconected!

Connect phone on selected interface...

Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
SimLock Data found!
SimLock key found!
SuperDongle Key found!
WMDRM key found!
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID:       000000030000022600010007600C192102031104
CPU ID :       RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00001051
EM1 ID:        00001060
PUBLIC ID:     0ED0010DA31300492CF025BFB3E1EFCFEFEA345F
ASIC MODE ID:  00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID:        E693EF0DAC22615B
Use RAPUv11_2nd.fg  ,  Rev : 3.0  Ver : 11.34.0 
Processing RAWLOADER...
FLIC : 003000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg  ,  Rev : 3.0  Ver : 11.34.0 
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:15 
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
Waiting for response: 28
Waiting for response: 27
Waiting for response: 26
Waiting for response: 25
Waiting for response: 24
Waiting for response: 23
Waiting for response: 22
Waiting for response: 21
Waiting for response: 20
Waiting for response: 19
Waiting for response: 18
Waiting for response: 17
Waiting for response: 16
Waiting for response: 15
Waiting for response: 14
Waiting for response: 13
Waiting for response: 12
Waiting for response: 11
Waiting for response: 10
Waiting for response: 9
Waiting for response: 8
Waiting for response: 7
Waiting for response: 6
Waiting for response: 5
Waiting for response: 4
Waiting for response: 3
Waiting for response: 2
Waiting for response: 1
Phone not found... :(

Phone disconected!

Connect phone on selected interface...

Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
SimLock Data found!
SimLock key found!
SuperDongle Key found!
WMDRM key found!
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Can't verify Bootrom :( Try again...
->  Error answer from BootRom
Looks like ASIC not supported, or HW failure
Supported : RapuYama, RAP3Gv4, BroadComm

Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
SimLock Data found!
SimLock key found!
SuperDongle Key found!
WMDRM key found!
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID:       000000030000022600010007600C192102031104
CPU ID :       RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00001051
EM1 ID:        00001060
PUBLIC ID:     0ED0010DA31300492CF025BFB3E1EFCFEFEA345F
ASIC MODE ID:  00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID:        E693EF0DAC22615B
Use RAPUv11_2nd.fg  ,  Rev : 3.0  Ver : 11.34.0 
Processing RAWLOADER...
FLIC : 003000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg  ,  Rev : 3.0  Ver : 11.34.0 
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:08 
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
Waiting for response: 28
Waiting for response: 27
Waiting for response: 26
Waiting for response: 25
Waiting for response: 24
Waiting for response: 23
Waiting for response: 22
Waiting for response: 21
Waiting for response: 20
Waiting for response: 19
Waiting for response: 18
Waiting for response: 17
Waiting for response: 16
Waiting for response: 15
Waiting for response: 14
Waiting for response: 13
Waiting for response: 12
Waiting for response: 11
Waiting for response: 10
Waiting for response: 9
Waiting for response: 8
Waiting for response: 7
Waiting for response: 6
Waiting for response: 5
Waiting for response: 4
Waiting for response: 3
Waiting for response: 2
Waiting for response: 1
Phone not found... :(

Phone disconected!

Connect phone on selected interface...

Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
SimLock Data found!
SimLock key found!
SuperDongle Key found!
WMDRM key found!
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID:       000000030000022600010007600C192102031104
CPU ID :       RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00001051
EM1 ID:        00001060
PUBLIC ID:     0ED0010DA31300492CF025BFB3E1EFCFEFEA345F
ASIC MODE ID:  00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID:        E693EF0DAC22615B
Use RAPUv11_2nd.fg  ,  Rev : 3.0  Ver : 11.34.0 
Processing RAWLOADER...
FLIC : 003000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg  ,  Rev : 3.0  Ver : 11.34.0 
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:11 
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : 23B57C26A0C7A9C34544727AA1D2FC8F3265329C
ADL: Preparing for write certificates...

Erase NPC... Ok
Writing NPC... Ok
Erase CCC... Ok
Writing CCC... Ok
Erase HWC... Ok
Writing HWC... Ok

ADL: Writing Flash certs done! :)

ADL: Close_Session
Content: 000300000000020000000200000000
ADL: Reboot
Wait, reconneting...

Writing SimLock Key...   Ok!
Writing SimLock Data...  Ok!
Writing Super Dongle Key...   Ok!

SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!! :(

WMDRM_PD key sent... Ok

Done!

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info...  - Ok

Тело включается и высвечивает Contact Service. Есть еще идеи?

09.12.2011, 17:46

Новое

uo5oq
MCRF Инженер

Сообщений:: 4,787

Регистрация:: 21.07.2005

Рейтинг мнений: 3661

Вес репутации: 1364

Re: Nokia X3-02 не прошивается до конца. #9

Идеи для чего?
Вернуть в предыдущее состояние?
Или полностью восстановить телефон?

__________________
Разблокировка iPhone, NCK Коды, Логи и Активации для GSM Боксов и программ на www.UO5OQ.com

09.12.2011, 17:49

Новое

Turboxxx
MCRF Инженер

Сообщений:: 1,392

Регистрация:: 28.08.2008

Возраст:: 38

Рейтинг мнений: 1738

Вес репутации: 527

Re: Nokia X3-02 не прошивается до конца. #10

Security status : Security Damaged!!!!!

По идеи SX4 и PM

09.12.2011, 17:50

Пользователь добавил плюс

clifford_umc (10.12.2011)

Новое

clifford_umc
Участник

Сообщений:: 1,604

Регистрация:: 25.09.2006

Возраст:: 48

Рейтинг мнений: 484

Вес репутации: 344

Re: Nokia X3-02 не прошивается до конца. #11

Всем огромное спасибо! "Моск" затмила радость что тело прошилось вот и выпустил из виду PM. Залил PM и все ОК!

10.12.2011, 12:21

Похожие темы
Тема	Автор	Раздел	Ответов	Последнее сообщение
Вопрос C3530 не прошивается до конца	Tiburon	Samsung	1	10.02.2011 18:34
SE k850 - не прошивается до конца.	Habib	SE Tool 2	12	06.05.2009 15:37
N70 не прошивается до конца	Raikkonenn	Nokia BB5	8	25.05.2008 02:13
6230i не прошивается до конца	ASUS	Семейство DCT-4, WD-2	4	29.06.2007 15:16
W900i не прошивается до конца	ImpulSeGSM	SonyEricsson серия	0	23.04.2007 14:51

Здесь присутствуют: 1 (пользователей: 0 , гостей: 1)

Имя		Запомнить?
Пароль

Наши партнеры

clifford_umc vbmenu_register("postmenu_246200", false); Участник

Joker vbmenu_register("postmenu_246203", false); Забанен

chabrus vbmenu_register("postmenu_246205", false); MCRF Инженер

uo5oq vbmenu_register("postmenu_246209", false); MCRF Инженер

clifford_umc vbmenu_register("postmenu_246210", false); Участник

chabrus vbmenu_register("postmenu_246213", false); MCRF Инженер

Bodirog vbmenu_register("postmenu_246217", false); MCRF Инженер

clifford_umc vbmenu_register("postmenu_246297", false); Участник

uo5oq vbmenu_register("postmenu_246299", false); MCRF Инженер

Turboxxx vbmenu_register("postmenu_246300", false); MCRF Инженер

clifford_umc vbmenu_register("postmenu_246347", false); Участник

clifford_umc
Участник

Joker
Забанен

chabrus
MCRF Инженер

uo5oq
MCRF Инженер

clifford_umc
Участник

chabrus
MCRF Инженер

Bodirog
MCRF Инженер

clifford_umc
Участник

uo5oq
MCRF Инженер

Turboxxx
MCRF Инженер

clifford_umc
Участник