Восстановление 6303 после ERASE.
#1
Пришло тело - перегружайка. Прошил на MT - отправил. Через некоторое время тело возвращается. Перегружается на Nokia. Посмотрел - слетевшая SLD. Есть UFS, MT, MX-key. Пытался залить бэкапы PM - не льётся 308 поле. Затираю MX-key:
Код:
Using device: UFS_USB V2.8 (c) SarasSoft 2007.
Library version: 1.0.0.8929(24-06-2010), 1.0.0.14574(24-06-2010)
RAP Data :
SYSTEM ASIC ID: 000000010000022600010006030C192101033000 [RAP3G ver: PA 3.x]
EM0 ID: 00000295
EM1 ID: 00000B22
PUBLIC ID: 12100115E9FD8B569BA7619D06C4C213541ABA7D
ASIC MODE ID: 00
ROOT KEY HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
ROM ID: 273F6D55DFAAF68F
SecondaryBoot: rap3gv3_2nd.fg [BB5] version: 1.30.0 revision: 0.0 size: 0x3C00
Supported RAP Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
FlashID0: 0089 8982 - 0000 0000 [Intel NU48F512,512 Mbits] type: NOR,RAP
ExtBUSC: 0000 0000 0000 0000 0000 0000 0000 0000
TransmissionMode: 16Bit
Algorithm: RAP3Gv3_algo_131.fg [BB5 ALGORITHM] version: 1.31.0 revision: 0.0 size: 0x297E0
Supported RAP Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0003192101002000, 000C192101002000, 0003192101002100, 000C192101002100, 0003192101002200, 000C192101002200, 0003192101012200, 000C192101012200, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
RAP PAPUBKEYS HASH: E8E6E2AB6C2D394BC82633D2B4965E7E519E2FB2
TransmissionMode: DDR&TX2
Erase size: 63.75 MB
CMT NOR area [00000000-03FBFFFF] erased in 6 min 16.484 s
Лью MCU+PPM+CNT на MT-box:
Код:
Using Tx2 Data line.
Processing File: rm443__10.12.mcusw
Boot...
rap3gv3_2nd.fg
RAP3Gv3_algo.fg
Erase RAP3 [00000000 - 0001FFFF]
Erase RAP3 [00040000 - 0005FFFF]
Erase RAP3 [00060000 - 0007FFFF]
Erase RAP3 [00080000 - 0015FFFF]
Erase RAP3 [00160000 - 0023FFFF]
Erase RAP3 [01740000 - 0191FFFF]
Erase RAP3 [00240000 - 0173FFFF]
Erase RAP3 [022E0000 - 0261FFFF]
Erase[28.25 MB]...
Waiting response for 132 Sec...in 0.47s
Flash[24.65 MB]...in 46.27s
* * Processed file in 55.30 seconds
Processing File: rm443__10.12.image_i_ru_matt_black
Content area page size is 128K.
Boot...
rap3gv3_2nd.fg
RAP3Gv3_algo.fg
Erase RAP3 [02620000 - 029BFFFF]
Erase RAP3 [029C0000 - 03FBFFFF]
Erase[25.63 MB]...
Waiting response for 132 Sec...in 24.25s
Flash[10.14 MB]...in 18.98s
* * Processed file in 54.75 seconds
Extract content...OK
Processing File: rm443__10.12.ppm_i
Boot...
rap3gv3_2nd.fg
RAP3Gv3_algo.fg
Erase RAP3 [01920000 - 022DFFFF]
Erase[9.75 MB]...
Waiting response for 132 Sec...in 0.30s
Flash[6.70 MB]...in 12.50s
* * Processed file in 21.36 seconds
* * * Phone flashing done in 2:50 minutes
Post Flash serial tunning of phone....
Pooling mode for full factory set...
V 10.12/08-04-10/RM-443 (c) Nokia
IMEI: 12345610654321?
Factory Default Settings...OK
Лью бэкап PM:
Это MX-key:
Код:
Writing PM from Node ...
Section: 1
- Key: 0, size 48 bytes written.
- Key: 2, size 86 bytes written.
- Key: 4, size 48 bytes written.
- Key: 6, size 86 bytes written.
- Key: 8, size 48 bytes written.
- Key: 11, size 12 bytes written.
- Key: 12, size 24 bytes written.
- Key: 13, size 86 bytes written.
- Key: 16, size 24 bytes written.
- Key: 18, size 24 bytes written.
- Key: 21, size 24 bytes written.
- Key: 29, size 4 bytes written.
Section: 2
- Key: 0, size 764 bytes written.
Section: 120
Warning: failed to write 120 - 0 (944 bytes)
Warning: failed to write 120 - 1 (160 bytes)
- Key: 2, size 130 bytes written.
- Key: 3, size 112 bytes written.
Section: 308
Warning: failed to write 308 - 0 (1 bytes)
Warning: failed to write 308 - 1 (8192 bytes)
Warning: failed to write 308 - 3 (1 bytes)
Warning: failed to write 308 - 4 (1 bytes)
Warning: failed to write 308 - 5 (10 bytes)
Warning: failed to write 308 - 6 (1 bytes)
Warning: failed to write 308 - 7 (1 bytes)
Warning: failed to write 308 - 8 (1 bytes)
Warning: failed to write 308 - 9 (40 bytes)
Section: 309
- Key: 0, size 4 bytes written.
- Key: 1, size 2 bytes written.
- Key: 2, size 12 bytes written.
- Key: 4, size 12 bytes written.
- Key: 7, size 12 bytes written.
- Key: 17, size 12 bytes written.
Completed in 8.234 s
Это MT:
Код:
Sending to phone Resource: 01
Sending to phone Resource: 02
Sending to phone Resource: 78
Sending to phone Resource: 134
Warning: Failed to write 134:0000, 1bytes.
Use SX4 button to authorize
Sending SIMLOCK record...
Warning: Failed to write 134:0001, 8192bytes.
Use SX4 button to authorize
Warning: Failed to write 134:0003, 1bytes.
Use SX4 button to authorize
Warning: Failed to write 134:0004, 1bytes.
Use SX4 button to authorize
Warning: Failed to write 134:0005, 10bytes.
Use SX4 button to authorize
Warning: Failed to write 134:0006, 1bytes.
Use SX4 button to authorize
Warning: Failed to write 134:0007, 1bytes.
Use SX4 button to authorize
Warning: Failed to write 134:0008, 1bytes.
Use SX4 button to authorize
Warning: Failed to write 134:0009, 40bytes.
Use SX4 button to authorize
Sending to phone Resource: 135
Дальнейшие танцы с бубном ни к чему не приводят. После заливки сертификатов (бэкапы) - 308 поле так же не удаётся пролить. На 5130 мне удавалось решить эту проблему перешивкой в 5310, потом бэкапы, потом прошивка обратно в 5130. Здесь же не получается никак.
Последние файлы
