Ответ: RadioComm_v9.2.3.rar
#4
Цитата:
Сообщение от fonefan
а чем она от прежних отлечаеться-что нового в ней?
|
Version 9.2.3 (Released 6/8/05)
- General
o
- CDMA1X
o Changed seem values used for fast camp to the over 10000 range – LIBgg10337
o Added WLAN commands in FTM mode – LIBgg12800
o Added WLAN command params in P2K mode – LIBgg12800
o Fixed errors for gpio control on FTM Tests tab
o Added GET_GPS_CN and SET_PDM for Franklin
o Fixed text boxes being disabled for address and data of TST_DISP command
- GSM
o Changed size of SEEM_SAM_LOCAL_DEVICE – LIBgg20050
o Batt I ADC for AUL – LIBgg22973
- 3G
o
- TDMA
o
- CDMA
o
Version 9.2.0 (Released 5/12/05)
- General
o
- CDMA1X
o Changed the ADC mapping to be correct for all products – LIBgg05938
o Added GPS mode button for P2K CP_MODE command for Franklin
- GSM
o Added Light Sensor for P2K05 – LIBgg02329
o Changed AUD_TN_LST disable to use tone identifier instead of 0x0000 – LIBgg07580
o iTunes PKI changes – LIBgg09460
o Carrier and Carrier_Syn_Atten command changes to allow 56 bytes of data – LIBgg09517
- 3G
o
- TDMA
o
- CDMA
o
Version 9.1.0 (Released 4/27/05)
- General
o Added ability for users to enable test command logging to a file for complete data.
o Added elapsed time for each test command to be displayed to the screen
o Fixed exception when reading the nv using a sw csv file
o Changed to allow virtual comm. Ports up to 99
o Fixed RC updates tab when running from PTE
o Fixed Parsed panic data to show the correct amount of data
o SBCM Parser is complete and able to parse the SBCM log from the phone
- CDMA1X
o Added FTM_SMART_BATT to FTM 1 tab
o Added FTM_AUDIO_MUTE to FTM 4 tab
o Added FTM_SET_AUDIO_LEVEL to FTM 4 tab
o Added FTM_GET_AUDIO_LEVEL to FTM 4 tab
o Added FTM_AUDIO_LOOPBACK to FTM 4 tab
o Added HOB option to Verify HOB Restore
o Corrected IMAXSEL list for Milan product
o Moved AUD_EMU over to be an FTM command on FTM 4 tab
- GSM
o Added new options for INVM command
o Removed WRITE_DA (AGC)
- 3G
o Added new options for INVM command
o Add camera flash and video led control