Prinisli tipa TECHNO T500 dlya normalniy rusifikassiu.
Prashil normolna nu ne katoriye telefoni ne vklucalis.Na kancse RPL ne proshivalsia.Kak mojna vostanavit telefon??

Checking data, wait...
advanced flash detection disabled
Action: write NOR flash
"smart write" active
write: Firmware
skip: Customization
skip: Language Pack
skip: Eeprom
Boot...
Press and HOLD Power button now !
Connecting, wait...
Initializing[6226:8A02:8A01]...
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung D 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
921600
Set baud Done
Check space...
Check space Done
Manipulation...
Manipulation Done
Finalization...
Finalization Done
Write...
detect device identification, method #1...
detection phase #1...
detect device parameters finished
structure: 2nd [enhanced] (or higher) generation
identification detection finished
Area: Firmware
flash: EC257E25082501:29EA0000000000
Write: Firmware
structure: 2nd [enhanced] (or higher) generation
warning: probably identification data damaged, power-on problem possible
error: rpl file not found: D:\Program Files\InfinityBox\ChineseMiracle\id.2BBD1EAB._D200 ZS_C1_D200ZS_GPRS_MT6226_S01.01_0.BIN_B37A2F2F_.rp l
warning: unknown identification structure: D200ZS_C1_D200ZS_GPRS_MT6226_S01.01_0.BIN_B37A2F2F
error: ASK file can't be created, user action required:
1. download latest software from support area and try again !
2. if no still luck follow the next procedure:
- find good working phone with the same firmware[D200ZS_C1_D200ZS_GPRS_MT6226_S01.01_0.BIN]
- make "Read detailed information, ask/rpl" operation
- send "backup_system_log_..." file to support
- make "Read full flash" operation
- send flash backup file(s) to support
- include in your e-mail full text from phone back label (phone name etc.)
- be little bit patient and wait update
identification detection finished
device-id: 2BBD1EAB
protocol ver: 04
ver. sw1: D200ZS_C1_D200ZS_GPRS_MT6226_S01.01_0.BIN
ver. sw2: D200ZS_C1.01.0
ffs offset/size: 00800000/001FF000
Write Done
Finished, time used: 227 sec
Remove/Install battery now !

M

После изучения всех Ваших постов было принято решение: ещё один пост в таком стиле, с чудовищно неграмотным написанием, фактически глумлением над русским языком, и Вы будете отправлены в вечный бан. Аргументы о том, что, дескать, языка не знаете, не проходят. Такое мы тут терпеть не будем! Это просто кошмар. Извольте использовать системы перевода, раз не умеете иначе. См. Правила форума.

- make "Read detailed information, ask/rpl" operation
- send "backup_system_log_..." file to support
- make "Read full flash" operation
- send flash backup file(s) to support
- include in your e-mail full text from phone back label (phone name etc.)

Даже немного не так, а вот так:

-------------------------------------------
1. download latest software from support area and try again !
2. if no still luck follow the next procedure:
- find good working phone with the same firmware [D200ZS_C1_D200ZS_GPRS_MT6226_S01.01_0.BIN]
- make "Read detailed information, ask/rpl" operation
- send "backup_system_log_..." file to support
- make "Read full flash" operation
- send flash backup file(s) to support
- include in your e-mail full text from phone back label (phone name etc.)
- be little bit patient and wait update
-------------------------------------------

Еще есть вариант стянуть с суппорт прошивку:
D200ZS_C_D200ZS_GPRS_MT6226_S01.01_02
пролить, сделать аск-рпл.
Если не получилось, то см. в самое начало.

Тема в помойке. Просьба использовать системы перевода, если не можете грамотно писать на русском языке. Это русскоязычный официальный форум поддержки, а не форум поддержки на тарабарском языке. Читать такую ахинею нашим участникам крайне неприятно.