RIFF Box V2
#1
встречаем второе поколение бокса
RIFF BOX v2 H/W Specification
Dual-core Cortex-M4 MCU @ 204MHz;
PC to Box USB (Device) Speed: Hi-Speed (480 Mbps);
Box to Device (Host) Speed: Full-Speed (48 Mbps);
SD/MMC Interface with 1-Bit (DAT0) and 4-Bit (DAT0-DAT3) Bus Width support and SD_CLK up to 52 MHz;
UART Interface;
RIFF™ Smart Probing Feature;
Level-adjustable 23 GPIO Lines (1.65V to 3.6V) for interfacing a range of devices and protocols, such as NAND, SPI, I2C, Pin Finder, etc.;
4 fixed 3.3V GPIO Lines;
RIFF BOX v2 Interface Specification
20-Pin Male Connector:
JTAG Interface: TRST, TDI, TMS, TCK, RTCK, TDO and NRST;
SWD (Serial Wire Debug) Interface: SWCLK, SWDIO (SWDIO and SWCLK are overlaid on the TMS and TCK pins);
30-Pin Male Connector:
SD/MMC Interface 1/4Bit @ 52MHz;
Level-adjustable 23 GPIO Lines (1.65V to 3.6V);
USB Device Connector: connects the Box with PC @ Hi-Speed (480 Mbps), approx. 20 MByte/sec;
USB Host Connector: connects the Box with USB devices @ Full-Speed (48 Mbps), approx. 1.5-2 MByte/sec;
RJ-45 Connector:
RIFF™ Smart Probing Feature;
UART Port;
4 Fixed 3.3V GPIO Lines;
Supported SD/MMD Revisions:
Revisions 1.0 to 1.7 (for MMC: v4.0, v4.1, v4.2, v4.3, v4.41, v4.5, v4.51, v5.0) and higher
Supported JTAG Cores:
ARM7,
ARM920,
ARM926,
ARM946,
ARM7EJS,
ARM11,
CORTEX-A5,
CORTEX-A8,
CORTEX-A9,
CORTEX-A15,
OMAP3430,
OMAP3630,
OMAP4430,
TEGRA2 (CORTEX-A9),
TEGRA2 (ARM7),
QUALCOMM S3 (ARM7, ARM11, SCORPION),
QUALCOMM S4 (ARM7, ARM11, SCORPION),
NOVATHOR,
PXA270,
PXA312
MIPS32™ IR5Bit,
MIPS32™ IR8Bit,
RIFF Box v2 software:
RIFF JTAG Manager
RIFF Remote helper
RIFF Admin client / SN reader
RIFF Box USB drivers
Последние файлы
