Connecting to BB5 Box ...
Searching for phone ...
Phone found on FBUS interface
Reading phone info ...
Type: RM-140
Version: V_03.84_23-10-06_RM-140_(c)_Nokia
IMEI: 353639012888895
SP LOCK status:
Config Key: 2680600000000000
Block 1: CLOSED Type 5 Data: 26806F
Keyboard wrong codes counter: 0 wrong tries from max. 3 tries
Cable wrong codes counter: 6 wrong tries from max. 10 tries
Set Full Factory Defaults ...
Reset phone ...
Full Factory Defaults set OK
Skip autobackup of PM 308
Autobackup file:
RM-140_353639012888895_Locked_Keycnt_0_Fbuscnt_6__V_0 3.84_23-10-06_RM-140_(c)_Nokia.bin
already exist
Auto Write PM 308 procedure started
Searching for backup file with lowest counters ...
Finded backup file: RM-140_353639012888895_Locked_Keycnt_0_Fbuscnt_0__V_0 3.84_23-10-06_RM-140_(c)_Nokia.bin
Writting PM Field 308 Subfield 1 with length 8192 bytes
Reset phone ...
PM Field 308 Subfield 1 written OK
Reading SP Locks after Auto Write PM 308 ...
SP LOCK status:
Config Key: 2680600000000000
Block 1: CLOSED Type 5 Data: 26806F
Keyboard wrong codes counter: 0 wrong tries from max. 3 tries
Cable wrong codes counter: 0 wrong tries from max. 10 tries
Checking if model/version is supported for unlock ...
Please connect testpoints
Testpoints connected OK
Keep Testpoints connected until unlock finish!
Unlocking phone ...
Delaying unlock procedure with 500 miliseconds
Try unlocking using keyboard codes ...
Try number (Keyboard): 1
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number (Keyboard): 2
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number (Keyboard): 3
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Unlock using keyboard codes fail.
Try unlocking using cable codes ...
Try number (Cable): 1
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number (Cable): 2
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number (Cable): 3
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number (Cable): 4
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number (Cable): 5
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number (Cable): 6
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number (Cable): 7
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number (Cable): 8
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number (Cable): 9
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number (Cable): 10
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Unlock using cable codes fail.
Reading again SP Locks ...
SP LOCK status:
Config Key: 2680600000000000
Block 1: CLOSED Type 5 Data: 26806F
Keyboard wrong codes counter: 3 wrong tries from max. 3 tries
Cable wrong codes counter: 10 wrong tries from max. 10 tries
Unlock fail. Please try again.

Что только не сделал уже и провода укоротил и версию понизил но никак..
Кто сталкивался с такой проблемой ?

M	Вы Правила изучить не пробовали? во первых логи должны быть в тэге "код". во вторых что это за название темы? Никак не поддаётся что? каждый должен читать лог, что бы понять что Вы сделать хотите? не проще ли указать цели? Тема в помойке, можете создать её заново, в соответствии с Правилами!