Уже три
аппарата
N95 (огромный сенсорный экран, 1 сим) не могу никак поднять. Аппарат перезагружался вначале с симкой, его форматнул знакомый мастер не знаю как. После этого аппарат не включается. Пробовал разные прошивки. На руках имел абсолютно рабочий телефон с которого снял бекап фула и еепроа. Я прошивал этот аппарат и файлами с саппорта и имел на руках абсолютно идиентичный аппарат и внутренне и внешне и название прошивки абсолютно совпадали. Новая версия програмы всегда говорит "can`t detect eeprom area", а старая - что не может финализировать. Обе версии говорят что :"Unknown firmare". Вот лог инфинити версии 1.38:

COM4 [VCP4] selected
Device: Autodetect
Checking data, wait...
advanced flash detection active
Action: read/check detailed information
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02:8A01]...
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000
0008x002000]
16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
460800
Set baud Done
Check space...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000
0008x002000]
16Mb
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification, method #1...
detection phase #1...
detect device parameters finished
memory structure: 2nd [enhanced] (or higher) generation
warning: make backup before any action !
warning: probably identification data damaged, power-on problem
possible
error: rpl file not found: D:\Program Files\InfinityBox\ChineseMiracle\id.3BF71E0A._T622 6_05C_PCB01_GPRS_MT6226_S01.B22_2731FLASH_LCD_.BIN _151F1C24_.rpl
warning: unknown identification structure:
T6226_05C_PCB01_GPRS_MT6226_S01.B22_2731FLASH_LCD_ .BIN_151F1C24
error: ASK file can't be created, user action required:
- find good working phone with the same
firmware[T6226_05C_PCB01_GPRS_MT6226_S01.B22_2731FLASH_LCD_ .BIN]
- make "Read detailed information, ask/rpl" operation
- send "backup_system_log_..." file to support
- make "Read Full Flash" operation
- send flash backup file(s) to support
- include in your e-mail full text from phone back label (phone
name
etc.)
- be little bit patient and wait update
identification detection finished
device-id: 3BF71E0A
protocol version: 04
version sw1: T6226_05C_PCB01_GPRS_MT6226_S01.B22_2731FLASH_LCD_ .BIN
version sw2: B22_2731FLASH_LCD_
ffs offset/size: 00E00000/00200000
detecting eeprom area in 1 chip(s)...
flash: EC257E25082501:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom found near: 00E00000
detecting eeprom size...
eeprom size: 00200000
eeprom chip: 00
eeprom area detected[00000000]: 00E00000-00FFFFFF
detection phase #3...
.................................................. ..............
done
detecting structure pass 1...
..................
detect standard location pass #1...
.................................................. ......
detect extended location pass #1...
.................................................
detect standard offset pass #1...
detect standard data...
layout detection complete
eeprom element #1 detected ok
Finished, time used: 72 sec
Remove/Install battery now !




C версией 2.14 программа говорит что не может финализировать:




COM4 [VCP5] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: write NOR flash
write: Firmware
skip: Customization
skip: Language Pack
skip: Eeprom/ffs
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02:8A01]...
chip: 00311C1:94EE
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000
0008x002000]
16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000
0008x002000]
16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
921600
Set baud Done
Identification...
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 damaged, recalculation required
identification#1 detection finished
device-id: A9F4C3C6
identification#1 protocol ver: 04
ver. sw1: T6226_05C_PCB01_GPRS_MT6226_S01.B22_2731FLASH_LCD_ .BIN
ver. sw2: B22_2731FLASH_LCD_
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found
detect device identification#2 finished
Identification Done
Manipulation...
Manipulation Done
Finalization...
Finalization Done
Write...
detect device identification#2...
detection phase #1...
.
warning: optional information not found
detect device identification#2 finished
warning: rpl file not found: D:\Program Files\InfinityBox\ChineseMiracle\id.A9F4C3C6.[T6226_05C_PCB01_GPRS_MT6226_S01.B22_2731FLASH_LCD_ .BIN_151F1C24].rpl
warning: rpl file not found: D:\Program
Files\InfinityBox\ChineseMiracle\id.A9F4C3C6._T622 6_05C_PCB01_GPRS_MT6226_S01.B22_2731FLASH_LCD_.BIN _151F1C24_.rpl
warning: rpl file not found: D:\Program
Files\InfinityBox\ChineseMiracle\backup_security\i d.A9F4C3C6.[T6226_05C_PCB01_GPRS_MT6226_S01.B22_2731FLASH_LCD_ .BIN_151F1C24].rpl
warning: rpl file not found: D:\Program
Files\InfinityBox\ChineseMiracle\backup_security\i d.A9F4C3C6._T6226_05C_PCB01_GPRS_MT6226_S01.B22_27 31FLASH_LCD_.BIN_151F1C24_.rpl
warning: unknown identification#1 structure:
T6226_05C_PCB01_GPRS_MT6226_S01.B22_2731FLASH_LCD_ .BIN_151F1C24
error: Unknown firmware, user action required:
1. download latest software from support area and try again !
2. if no still luck follow the next procedure:
find good working phone with the same firmware:
T6226_05C_PCB01_GPRS_MT6226_S01.B22_2731FLASH_LCD_ .BIN
make "Read detailed information" operation
send "backup_system_log_..." file to support
make "Read full flash" operation
send flash backup file(s) to support
include in your e-mail full text from phone back label (phone
name
etc.)
- be little bit patient and wait update
You can flash phone now but can't finalize it.
In most cases phone can NOT power-on normally.
Do you want to write flash anyway ?
Area: Firmware
flash: EC257E25082501:29EA0000000000
Write: Firmware
Write Done
Finished, time used: 462 sec
Remove/Install battery now !




Впервые такое встречаю. Посоветуйте что еще можно попробовать. Буду очень благодарен.