|
|
|||||||
| SonyEricsson серия A36xx/J2xx/K7xx(i)/T6xx/T10x/T2xx/T300/R600/P800/P900/P910(i)... |
 |
|
|
Опции темы |
15.10.2007, 18:58
|
#1 |
|
Участник*
|
W850 моргалик
Все здрасте! На днях принесли W850 при вкл. белый экран, срабатывает вибро и потом постоянное моргание.
Из оборудования имеется SeTool прошиваю делаю комплит никаких изменений. Вот лог прошивки: Код:
Opening box. There is 1 ftdi devices v0.91380096/UNI Card serial:0000xxxx Loaded 51 flash descriptors ufs #xxxxx ready to work ChipID:9900,EMP protocol:0301 Speed:921600 Flash ID check:897E Flash props sent ok OTP LOCKED:1 CID:49 PAF:1 IMEI:35240101399004 CERT:RED FLASH CID:49 COLOR:RED MAPP CXC article: R1ED001 prgCXC1250200_GENERIC_CY MAPP CXC version: R1ED001 Language Package:C_ASIA CDA article: CDA102295/7 CDA version: R2A Default article: cxc1250489 Default version: R1EJ001 Operator: 000-00 RESTORATION FILE PRESENT FOR DETECTED FIRMWARE Elapsed:4 secs. SERVER SUPPORT ENABLED. ChipID:9900,EMP protocol:0301 Speed:921600 OTP LOCKED:1 CID:49 PAF:1 IMEI:35240101399004 CERT:RED FLASH CID:49 COLOR:RED PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0 LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005 Flash ID check:897E Flash props sent ok writing D:\DingoSoft\SonyErricsonSeTool\W850\R1ED001_1250200_GENERIC_CY.ssw.rar2\R1ED001_1250200_GENERIC_CY.ssw.cry CURRENT FLASH FILE CID:49 SSW uses complete hash, hash len is:9100 Will flash 455 blocks... SSW loading returns:0 writing D:\DingoSoft\SonyErricsonSeTool\W850\R1ED001_1250200_GENERIC_CY.ssw.rar2\R1ED001_BALTIC_fs.ssw.cry CURRENT FLASH FILE CID:49 SSW uses complete hash, hash len is:4580 Will flash 229 blocks... SSW loading returns:0 CSloader version: 070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009 loader startup: executed loader filesystem startup: executed loader GDFS startup: executed loader unlock: executed writing tpa/preset/custom/C3_PCA_G3v2.cer writing tpa/preset/custom/CONTENT_DOWNLOAD_HOOK_2.itm writing tpa/preset/custom/customize.xml writing tpa/preset/custom/DESKTOP_HOOK_2.itm writing tpa/preset/custom/Entrust.net Root Certificate.cer writing tpa/preset/custom/Entrust.net_WTLS_Root_Certificate.wcrt writing tpa/preset/custom/FM_PICTURES_HOOK_3.itm writing tpa/preset/custom/FM_SOUNDS_HOOK_3.itm writing tpa/preset/custom/FM_THEMES_HOOK_3.itm writing tpa/preset/custom/FM_VIDEOS_HOOK_3.itm writing tpa/preset/custom/GAMES_HOOK_3.itm writing tpa/preset/custom/GTE_CyberTrust_Root.cer writing tpa/preset/custom/GTE_Cybe_Trust_Root_WTLS.wcrt writing tpa/preset/custom/Root.cer writing tpa/preset/custom/SEMC_E2E_Root_CA.crt writing tpa/preset/custom/SETT_RINGTONE_HOOK_3.itm writing tpa/preset/custom/ThawtePremium.der writing tpa/preset/custom/ThawteServerCA.cer writing tpa/preset/custom/Utiroot.cer writing tpa/preset/custom/VeriSignClass3Root.cer writing tpa/preset/custom/Verisign_Class_3_CA_WTLS.wcrt Phone detached Elapsed:777 secs. По железу вроде все ок, плата чистая, шлейф меняли, остается только дисплей, но его пока нет. Помогите пожалуйста на кону престиж мастерской. Последний раз редактировалось gsm-brest; 17.10.2007 в 09:43. |
|
|
15.10.2007, 19:03
|
#2 |
|
Участник*
|
Re: W850 моргалик
Вот лог с UFS RTP
Код:
UFxBoot V2.2 (c) SarasSoft 2003. Id: 62 CF 1 7
UFS_USB V2.6 (c) SarasSoft 2005.S/n: 73433
Licence: True
Ϣv{32 CSATSERVICES_IMP: OnStart()!
632 CoreDebug: process up and running.
632 Core_Debug_Process: PREVIOUS DUMP
633 saveCrashDatatoGDFS: 0x6000C318, 439
633 saveCrashDatatoGDFS: 1
633 CRD_CD_Initialize(): called
633 CRD_CD_ReadEntry(): unit 1384, offset 0, buffer 0x201645E4, size 36
633 CRD_CD_ReadEntry(): OK
633 saveCrashDatatoGDFS(): Init(); MaxNumberOfCrashes 5,DataUnitNbr 1385,CrashFormatVersion 3,EncodingVersion 1,ContentVersion 1
633 CRD_CD_SaveData(): called
633 CRD_CD_WriteEntry(): unit 1387, offset 0, buffer 0x203DF8A8, size 16
633 CRD_CD_WriteEntry(): OK
633 CRD_CD_WriteEntry(): unit 1387, offset 16, buffer 0x6000C318, size 439
633 CRD_CD_WriteEntry(): OK
633 CRD_CD_WriteEntry(): unit 1384, offset 0, buffer 0x201645E4, size 36
633 CRD_CD_WriteEntry(): OK
633 CRD_CD_SaveData(): OK
633 saveCrashDatatoGDFS(): Save OK, size 439
633 saveCrashDatatoGDFS: ENDED
633 CoreDebug: Crash SMS not activated
679 MALL: **** NEW MAXIMUM HEAP 0 USAGE: 534528 bytes requested in total ****MMPROT[RTP]: RtpSetJitterDelaysForPoc - FirstDelayMs 20, NormalDelayMs 800
703 MMPROT[RTP]: RtpSetTTLsForPoc - TimeToLive_RTP_Ms 2500, TimeToLive_RTCP_Ms 1000
703 MMPROT[RTP]: RTP_Ctrl started
704 ###Downloading DSP for first time after startup of phone!###
740 ## DSP VersionIdentity: "CRH109469_R10K MIDI_PCM_ASR --- QLOTCAR_DSP_R10_Platinum Tue Jun 13 14:51:36 2006"
740 AUC INFO: Starting PostBoot. Takes a while in MoseS (5 sek)
775 HW_FG: En ChBT/EBT_sil.c: 399 SIL_OpenConnection: Start event OK!
816 DRM: Init OK
816 DRM_PRS: DRM_PRS_Process started
821 GDFS_SRV Queue full
821 SPBC Process started
826 MSG: msgmain.c: State 255
826 CBS: cbs_main.c: EVENT_SIM_STATE_CHANGED accepted
826 CBS: cbs_main.c: SIM STATE 0, process 0MMPROT[SIP]: SIP started
831 GDFS_WR State 1-Closed
831 GDFS_WR Start check
839 BATT: Battery type is TYPE 1
839 BATT: Compensated VBAT (3736 mV) based remaining capacity is 19.4%
877 GDFS Free Blk 0 Ok
877 GDFS_WR Check done
877 GDFS_SRV State 3-Open
878 GDFS_WR State 2-OpenBT/BT.c: BT_RECEIVE_W_TMO: Timeout after 500 ms
909 EILD_HCITL.c: 1681 UART ClockRequest: ON
909 BT/EBT_sil.c: [Tx] HCI_Reset:
909 EILD_HCITL.c: 1799 PowerManagement: Wake-up from sleep mode:
909 EILD_HCITL.c: 1428 R_Do_Send:
909 2034E248 .... 01 03 0C 00
925 GDFS_SRV Queue empty
930 Handle_Shell_Timeout: Time-out from non-existent timer: 6000bd98 - Ignored.
930 Handle_Shell_Timeout: Time-out from non-existent timer: 6000bd98 - Ignored.EILD_HCITL.c: 1526 Done_Receive:
932 2033180A ....... 04 0E 04 02 03 0C 00
932 BT/EBT_sil.c: [Rx] HCI_Command_Complete_Event:
932 BT/BT.c: 6325 HCI_CONFIGURE_PORT_CNF:
932 BT/BT.c: 6314 HCI_START_CNF:
1061 *** PID started 65625. ***
1061 *** Test code: .... disabled. ***
1061 *** Runtime checks: disabled. ***
1061 *** Fatal errors: . enabled. ***
1061 *** Debug traces: . disabled. ***
1062 SM: Received REQUEST_PS_PERIODICREPORT_ENABLE
1062 CAS Proxy: <From CAS> PDCP_PERIODIC_REPORT_ENABLE_REQ
1062 SNDCP: SNDCP_PERIODIC_REPORT_ENABLE_IND
1062 SL<-REQUEST_CSS_NTCSD_PERIODICREPORT_ENABLE in State 0 from 10054
1062 SL: Not active
1090 CHARGING DATA: Vch 3750, Ich 90, Vbat 3756, Ibat 0, VFET 0, IFET 0, PDiss 5701, Temp 24
1132 [ICC-PD] WARNING - Character Timeout waiting for receive
1132 [ICC-PD] Fi: 1 Di: 1
1138 [ICC-PD] WARNING - Character Timeout waiting for receiveThe CheckIfMoreResets procedure has been activated.
1150 State = 30, NrOfTriesOfReset = 2.
1162 [SIM] *** ERROR *** No Card Present
1162 [SIM] InitialiseCard SIM_APPLICATION_UNKNOWN
1162 [SIM] WARNING - Destruction of Application Parameters
1162 [SIM_FILE_UTIL] Used Cache Records 0
1162 [SIM_FILE_UTIL] Max Cache Records 80
1162 [SIM] WARNING - Destruction of Card Parameters
1162 [SIM] State Changed: SIM_STATE_POWER_OFF, Appl: 0, Ref: 0[lockctrl] SimLock : NOT OK, PhoneLock : NOT OK, Sim Active : NOT ACTIVE
1162 SL<-EVENT_SIM_STATE_CHANGED in State 0 from 100d2
1162 SL: Not active
### @MMI shut down the Print Server! ###
###################################################################################
###################################################################################
This is the Platform Error handler
SW Build: R1ED001 prgCXC1250200_GENERIC_CY
An error has been reported by the kernel:
user_called : 0x0
error code : 0x80100113 OSE_EUNEXPECTED_EXCEPTION_REGDUMP
subcode : data abort (data access memory abort) OSE_KRN (0x00100000)
product : Kernel
header file : ose_err.h
extra : 0x203ed0f8
mode : supervisor
reg PC : 0x4549CD9C
reg LR : 0x4549CD8F
reg PSR : 0x60000033
reg SP : 0x203ED1C4
Current Process: 0x00010101
Process Name: @MMI
File:
Line: 0
CRASH ID: 0x27E50495
FAR: 0x4549CD9C
IMEI: 352401-01-399004
Saved print info: start 0x2046915C size 50000 pos 28858
Prints on queue info: start 0x2033F8C0
### Saved Print Lines #############################################################
Did a soft reset of the IrDA-block
IRPHYLib_PowerUpInit:
OS: Installed system tick
OS: Starting FSS
FS: *** This is SEMC FS ***
FS: Server processes started.
FSFLASH: Write processes started, pid = 0x10031.
FSFLASH: Erase processes started, pid = 0x10032.
FSFLASH: CPU is ARM 926, revision 3, architecture 6
FSFLASH: Inst Cache size is 32.00 Kb, 4-way, 32 bytes/line.
FSFLASH: Data Cache size is 16.00 Kb, 4-way, 32 bytes/line.
FSFLASH: NOR (Sibley) Flash device @ [0x44000000-0x47FFFFFF] 65536 Kb
FSFLASH: Vendor (0x89): Intel
FSFLASH: Device: ?????? (0x887E)
FSFLASH: Unique Device Number: 0xFD64C2C6A4C3E63E
FSFLASH: Page size: -
FSFLASH: Write Buffer Size: 1024 bytes
FSFLASH: Burst Mode: ON
FSFLASH: Erase region [0x44000000-0x47FFFFFF] has an erase block size of 256 Kb
FSFLASH: Mounting logical flash device 0
FSFLASH: Flash segment 0:0 located @ [0x45E00000,0x47DFFFFF] (32768 Kb)
FSFLASH: Flash type: NOR
FSFLASH: Block size: 1024
FSFLASH: Logical erase size: 256 Kb
MALL: **** NEW MAXIMUM HEAP 1 USAGE: 8224 bytes requested in total ****
MALL: **** NEW MAXIMUM HEAP 1 USAGE: 10368 bytes requested in total ****
MALL: **** NEW MAXIMUM HEAP 1 USAGE: 11424 bytes requested in total ****
MALL: **** NEW MAXIMUM HEAP 1 USAGE: 12480 bytes requested in total ****
MALL: **** NEW MAXIMUM HEAP 1 USAGE: 107296 bytes requested in total ****
FSFLASH: Check
FSFLASH: Stage 1
FSFLASH: Stage 2
FSFLASH: Stage 3
FSFLASH: Stage 4
FSFLASH: Config block located @ 0x45E00000
FSFLASH: Mount block located @ 0x46DB4800
FSFLASH: CLEAN blocks 3112
FSFLASH: MIN CLEAN blocks 512
FSFLASH: BAD blocks 0
FSFLASH: State 5 skipped
FSFLASH: Stage 6.1
FSFLASH: Stage 6.2 skipped
FSFLASH: Stage 7
FSFLASH: Stage 8
FSFLASH: Check done
FSFLASH: TOTAL number of blocks: 32768
FSFLASH: AVAILABLE blocks: 31596
FSFLASH: MAX logical block nbr: 31595
FSFLASH: COMMITTED blocks: 14558
FSFLASH: FREE blocks: 17038
FSFLASH: DIRTY blocks: 15024 (0 BAD)
FSFLASH: CLEAN blocks: 3109 (3109 NOR)
FSFLASH: HEADER blocks: 77
MALL: **** NEW MAXIMUM HEAP 1 USAGE: 122560 bytes requested in total ****
FS: Mounting FAT file system partition / for read/write
FS: SecPerClus = 2
FS: BytesPerSec = 512
FS: RootEntCnt = 512
FS: NumFATs = 1
FS: RsvdSecCnt = 1
FS: Type: FAT16
FS: AtFSX: 11.13
FS: Block size: 1024
FS: Read size: 1024
FS: FAT mirroring: OFF
FS: Sector locations
FS: Size: 54079 (0xD33F)
FS: PBR: 1 (0x1)
FS: FAT start: 2 (0x2)
FS: Active FAT start: 2 (0x2)
FS: Root start: 108 (0x6C)
FS: Clusters: 26970 (0x695A)
FS: Cluster start: 140 (0x8C)
FS: Cluster last: 54079 (0xD33F)
FS: Partition not closed
FS: Phone not properly shut down, running FSCK on partition /
FS: FSCK level is 1
FSCK: Directory Check
MALL: **** NEW MAXIMUM HEAP 1 USAGE: 131456 bytes requested in total ****
MALL: **** NEW MAXIMUM HEAP 1 USAGE: 138400 bytes requested in total ****
FS: Partition / set to clean
FSCK: Done
FS: File System Size: 26970 (26970 Kb)
FS: Free Logical Blocks: 12922 (12922 Kb)
FS: Free Physical Blocks: 17037 (17037 Kb)
FS: Used Blocks: 14048 (14048 Kb)
FS: Partition / mounted
MALL: **** NEW MAXIMUM HEAP 1 USAGE: 148256 bytes requested in total ****
FS: Mounting FAT file system partition /tpa/settings/ui/bgim/cache for read/write
FS: SecPerClus = 2
FS: BytesPerSec = 512
FS: RootEntCnt = 512
FS: NumFATs = 1
FS: RsvdSecCnt = 1
FS: Type: FAT12
FS: AtFSX: 11.13
FS: Block size: 1024
FS: Read size: 1024
FS: FAT mirroring: OFF
FS: Sector locations
FS: Size: 3999 (0xF9F)
FS: PBR: 1 (0x1)
FS: FAT start: 2 (0x2)
FS: Active FAT start: 2 (0x2)
FS: Root start: 8 (0x8)
FS: Clusters: 1980 (0x7BC)
FS: Cluster start: 40 (0x28)
FS: Cluster last: 3999 (0xF9F)
FS: File System Size: 1980 (1980 Kb)
FS: Free Logical Blocks: 1980 (1980 Kb)
FS: Free Physical Blocks: 17037 (17037 Kb)
FS: Used Blocks: 0 (0 Kb)
FS: Partition /tpa/settings/ui/bgim/cache mounted
MALL: **** NEW MAXIMUM HEAP 1 USAGE: 165696 bytes requested in total ****
FS: Mounting FAT file system partition /ifs for read/write
FS: SecPerClus = 2
FS: BytesPerSec = 512
FS: RootEntCnt = 512
FS: NumFATs = 1
FS: RsvdSecCnt = 1
FS: Type: FAT12
FS: AtFSX: 11.13
FS: Block size: 1024
FS: Read size: 1024
FS: FAT mirroring: OFF
FS: Sector locations
FS: Size: 1799 (0x707)
FS: PBR: 1 (0x1)
FS: FAT start: 2 (0x2)
FS: Active FAT start: 2 (0x2)
FS: Root start: 6 (0x6)
FS: Clusters: 881 (0x371)
FS: Cluster start: 38 (0x26)
FS: Cluster last: 1799 (0x707)
FS: Partition not closed
FS: Phone not properly shut down, running FSCK on partition /ifs
FS: FSCK level is 1
FSCK: Directory Check
FS: Partition /ifs set to clean
FSCK: Done
FS: File System Size: 881 (881 Kb)
FS: Free Logical Blocks: 533 (533 Kb)
FS: Free Physical Blocks: 17037 (17037 Kb)
FS: Used Blocks: 348 (348 Kb)
FS: Partition /ifs mounted
MALL: **** NEW MAXIMUM HEAP 1 USAGE: 183072 bytes requested in total ****
FS: Mounting FAT file system partition /system for read/write
FS: SecPerClus = 2
FS: BytesPerSec = 512
FS: RootEntCnt = 512
FS: NumFATs = 1
FS: RsvdSecCnt = 1
FS: Type: FAT12
FS: AtFSX: 11.13
FS: Block size: 1024
FS: Read size: 1024
FS: FAT mirroring: OFF
FS: Sector locations
FS: Size: 3199 (0xC7F)
FS: PBR: 1 (0x1)
FS: FAT start: 2 (0x2)
FS: Active FAT start: 2 (0x2)
FS: Root start: 8 (0x8)
FS: Clusters: 1580 (0x62C)
FS: Cluster start: 40 (0x28)
FS: Cluster last: 3199 (0xC7F)
FS: File System Size: 1580 (1580 Kb)
FS: Free Logical Blocks: 1549 (1549 Kb)
FS: Free Physical Blocks: 17037 (17037 Kb)
FS: Used Blocks: 31 (31 Kb)
FS: Partition /system mounted
MALL: **** NEW MAXIMUM HEAP 0 USAGE: 96 bytes requested in total ****
BuildInfo: Label: <CRH109338_14_R8A002> Variant: <cxc1329257_U250_PT_PHONE>
BuildInfo: Generated: 2006-08-16 16:24 by Off.Bld
Product : <Sony Ericsson W850> Version: 0000
HW Setup : Marika P2A (Id:0x9900) IRDA: B038 BT: C038 RS232: Error
Vendor : <Sony Ericsson> PNP: SER USB: 0FCE BT: 0000
OS: core startup complete!
OS: Vector 13 Pri 0 do not use DDA
OS: Vector 24 Pri 1 do not use DDA
OS: Vector 23 Pri 2 do not use DDA
OS: Vector 22 Pri 3 do not use DDA
OS: Vector 18 Pri 4 do not use DDA
OS: Vector 7 Pri 11 do not use DDA
OS: Vector 6 Pri 5 do not use DDA
OS: Vector 2 Pri 6 do not use DDA
OS: Vector 4 Pri 0 do not use DDA
OS: Vector 27 Pri 7 do not use DDA
OS: Vector 1 Pri 8 do not use DDA
OS: Vector 0 Pri 9 do not use DDA
OS: Vector 32 Pri 21 do not use DDA
OS: Vector 33 Pri 21 do not use DDA
OS: Vector 14 Pri 14 do not use DDA
OS: Vector 60 Pri 30 do not use DDA
OS: Vector 70 Pri 30 do not use DDA
OS: Vector 71 Pri 30 do not use DDA
OS: Vector 9 Pri 10 do not use DDA
OS: Vector 17 Pri 10 do not use DDA
OS: Vector 37 Pri 17 do not use DDA
WHAM_HW_ControlProcess is running
MPH: PID 65639
RLC_DL: S I
RR: PID 65641
RR: RR_MM_PRIM 469955328
RR: MM_RR_PRIM 469955968
RR: MPH_RR_PRIM 469956608
RR: RR_MPH_PRIM 469961088
RR: DL_RR_PRIM 469964288
RR: RR_DL_PRIM 469964928
RR: RR_MMM_PRIM 469968768
RR: MMM_RR_PRIM 469969408
RR: RR_RLC_PRIM 469970688
RR: RLC_RR_PRIM 469971328
RR: PH_MPH_PRIM 470181248
RR: MPH_PH_PRIM 470186688
RR: MPH_CB_PRIM 469973568
RR: CB_MPH_PRIM 469974208
RR: MPH_MMM_PRIM 469976128
RR: MMM_MPH_PRIM 469976768
RR: PH_RLC_PRIM 470194688
RR: RLC_PH_PRIM 470197888
RR: RLC_LLC_PRIM 469981888
RR: LLC_RLC_PRIM 469982528
RR: RR_LLC_PRIM 469985088
RR: LLC_RR_PRIM 469985728
RR: PH_RR_PRIM 470200448
RR: RR_PH_PRIM 470201088
RR: GAS_WAS_PRIM 470175488
RR: WAS_GAS_PRIM 470172928
RR: RR_TIMER_PRIM 469996928
RR: SIGID_INTERVAL_START_V2_UNIQUE_TEST_ON_RR_TIMER_PRIM 469996927
RR: SIGID_INTERVAL_END_V2_UNIQUE_TEST_ON_RR_TIMER_PRIM 469996949
RR: TEST_RR_TIMER_PRIM 1
RR: MPH_TIMER_PRIM 469995008
RR: T3206_VALUE: 800 ms
RR: T3208_VALUE: 960 ms
RR: T3210_VALUE: 300 ms
RLC: RLC_LLC
RLC: RLC_IDLE_REQ = 469981888
RLC: RLC_GMM_DATA_REQ = 469981889
RLC: RLC_DATA_REQ = 469981890
RLC: RLC_UNITDATA_REQ = 469981891
RLC: RLC_RLC_DATA_REQ = 469981893
RLC: RLC_RLC_UNITDATA_REQ = 469981894
RLC: RLC_DATA_RSP = 469981897
RLC: LLC_RLC
RLC: RLC_DATA_CNF = 469982528
RLC: RLC_DATA_IND = 469982529
RLC: RLC_STATUS_IND = 469982530
RLC: RR_RLC
RLC: RR_TBF_ESTABLISH_REQ = 469970688
RLC: RR_UPLINK_TBF_RELEASE_REQ = 469970690
RLC: RR_DOWNLINK_TBF_RELEASE_REQ = 469970691
RLC: RR_TBF_RELEASE_RSP = 469970692
RLC: RR_DOWNLINK_ACK_NACK_REQ = 469970693
RLC: RLC_RR
RLC: RR_TBF_ESTABLISH_CNF = 469971328
RLC: RR_UPLINK_TBF_RELEASE_CNF = 469971330
RLC: RR_DOWNLINK_TBF_RELEASE_CNF = 469971331
RLC: RR_TBF_ESTABLISH_IND = 469971329
RLC: RR_TBF_RELEASE_IND = 469971332
RLC: RR_UPLINK_ACK_NACK_IND = 469971333
RLC: PH_RLC
RLC: PH_RLC_DATA_REQ = 470194688
RLC: PH_RLC_DATA_RELEASE_REQ = 470194690
RLC: PH_RLC_CONTROL_REQ = 470194691
RLC: PH_RLC_CONTROL_CONTROL_0_PDCH_REQ = 470194693
RLC: PH_RLC_CONTROL_CONTROL_1_PDCH_REQ = 470194694
RLC: PH_RLC_CONTROL_CONTROL_2_PDCH_REQ = 470194695
RLC: PH_RLC_CONTROL_CONTROL_3_PDCH_REQ = 470194696
RLC: PH_RLC_CONTROL_CONTROL_4_PDCH_REQ = 470194697
RLC: PH_RLC_CONTROL_CONTROL_5_PDCH_REQ = 470194698
RLC: PH_RLC_CONTROL_DATA_0_PDCH_REQ = 470194699
RLC: PH_RLC_CONTROL_DATA_1_PDCH_REQ = 470194700
RLC: PH_RLC_CONTROL_DATA_2_PDCH_REQ = 470194701
RLC: PH_RLC_CONTROL_DATA_3_PDCH_REQ = 470194702
RLC: PH_RLC_CONTROL_DATA_4_PDCH_REQ = 470194703
RLC: PH_RLC_CONTROL_DATA_5_PDCH_REQ = 470194704
RLC: PH_RLC_CONTROL_CONTROL_0_PDTCH_PDCH_REQ = 470194705
RLC: PH_RLC_CONTROL_CONTROL_1_PDTCH_PDCH_REQ = 470194706
RLC: PH_RLC_CONTROL_CONTROL_2_PDTCH_PDCH_REQ = 470194707
RLC: PH_RLC_CONTROL_CONTROL_3_PDTCH_PDCH_REQ = 470194708
RLC: PH_RLC_CONTROL_CONTROL_4_PDTCH_PDCH_REQ = 470194709
RLC: PH_RLC_CONTROL_CONTROL_5_PDTCH_PDCH_REQ = 470194710
RLC: PH_RLC_CONTROL_DATA_0_PDTCH_PDCH_REQ = 470194711
RLC: PH_RLC_CONTROL_DATA_1_PDTCH_PDCH_REQ = 470194712
RLC: PH_RLC_CONTROL_DATA_2_PDTCH_PDCH_REQ = 470194713
RLC: PH_RLC_CONTROL_DATA_3_PDTCH_PDCH_REQ = 470194714
RLC: PH_RLC_CONTROL_DATA_4_PDTCH_PDCH_REQ = 470194715
RLC: PH_RLC_CONTROL_DATA_5_PDTCH_PDCH_REQ = 470194716
RLC: PH_RLC_RELEASE_REQ = 470194717
RLC: RLC_PH
RLC: PH_RLC_DATA_CNF = 470197888
RLC: PH_RLC_DATA_IND = 470197889
RLC: PH_RLC_DATA_RTS_IND = 470197890
RLC: PH_RLC_DATA_RELEASE_CNF = 470197891
RLC: PH_RLC_CONNECT_IND = 470197892
RLC: PH_RLC_CONTROL_CNF = 470197893
RLC: PH_RLC_CONTROL_IND = 470197894
RLC: PH_RLC_RELEASE_CNF = 470197895
RLC: RLC_TIMER
RLC: RLC_TIMER_T3164 = 469987008
RLC: RLC_TIMER_T3166 = 469987009
RLC: RLC_TIMER_T3180 = 469987010
RLC: RLC_TIMER_T3182 = 469987011
RLC: RLC_TIMER_T3190 = 469987012
RLC: RLC_TIMER_T3192 = 469987015
RLC_UL: S I
MPH_Low: PID 65644
LLC 11: state 0
LLC 9: state 0
LLC 7: state 0
LLC 5: state 0
LLC 3: state 0
LLC: PID 65645
LLC: <SMS 469772354
LLC: >SMS 469772996
LLC: <SNDCP 469978688 469978696
LLC 1: state 0
Prototype start process started!
SetIpc_Receiver PHY_Master called by Pid=65685
FSUSB: FS-USB Connection was initiated.
RLink: RLINK_PH
RLink: PH_RLINK_CONNECT_IND = 470178690
RLink: PH_RLINK_DISCONNECT_IND = 470178691
RLink: PH_RLINK_RTS_IND = 470178688
RLink: PH_RLINK_DATA_IND = 470178689
RLC: PH_RLINK
RLink: PH_RLINK_DATA_REQ
Rational Rose RealTime C Target Run Time SystemRelease 6.50.C.00
Copyright (c) 1993-2003 Rational Software
RTS ERROR: Failed to allocate additional 8 byte as static memory, allocating as heap, 4851 32-bit needed (4850 configured)
RTS ERROR: Failed to allocate additional 4 byte as static memory, allocating as heap, 4852 32-bit needed (4850 configured)EILD_HCITL.c: 585 EILD_HCITL_SetTXPin: PinLevel = 0
IRPHY[SetPolarity] Mode=0
IRPHY[SetSignalPolarity] InvertRx: 1
= 470178048
HW_FG: Dis Ch
RLink: RLINK_RLP
RLink: RLINK_RLP_RTS_IND = 469849344
RLink: RLINK_RLP_DATA_IND = 469849346
RLC: RLP_RLINK
RLink: RLINK_RLP_DATA_REQ = 469849347
RLink: RLINK_RLP_DTX_REQ = 469849348
RLC: RLINK_RR
RLC: RR_CHANNEL_MODE_INFO_IND = 314576640
RLC: RR_CHANNEL_MODE_MODIFY_IND = 314576641
RLink: State Idle
SM: Initiated; ProcessID = 65680 !
NS versions:
cnh1010128_rrtose => CNH1010128_R5Z
cnh1010235-2_ns_cas => CNH1010235_2_R6K012
cnh1010237_ns_was_if => CNH1010237_R9AC001
cnh1010238_ns_was => CNH1010238_R9AU012
cnh1010239_ns_wcdma_phy_if => CNH1010239_R10J
cnh1010278_rose_rt_codegen => CNH1010278_R4F
cnh1601471_ns_gas_l23 => CNH1601471_R3K006
cnh160294-3_ns => CNH160294_3_R4N004
cnh160552_applib_v42bis => CNH160552_R2D
cnh160573_network_asi => CNH160573_R6X001
cnh160634_ns_swbp => CNH160634_R9E
cnh160654_ns_gas_sndcp => CNH160654_R4F
cnh160655_ns_cas_ntcsd => CNH160655_R5K
cnh160884_ns_rrt_top_model => CNH160884_R7M
RRC_SysInfoServer:CNH1010238_SYSINFO_SIB16_R9_PHY_INTERFACE flag set
RRC_CellEval: Initialised
RRC_CellEval: State Inactive
RRC CellSel: STATE DEACTIVATED ***
RRC_MeasCtrl: Deactivated.
TASK: Init transition in MobilityCtrl cap
TASK: NO SERVING CELL in MobilityCtrl capsule
EILD_LLRS232_Init. Original GPIO routing:
RX : No
TX : No
CTS: No, Index=0
RTS: No, Index=0
LLRS232/LLDEBUG: cable inserted at startup
LLDEBUG/LLRS232: set mode to debug
### Print Server: Requesting DebugMux channel...
507 ### Print Server: Started OK
CA
508 CAS Proxy: Process Id = 65683MM: reset TMSI
508 MM: No valid GSM keys
508 MM: No valid WCDMA keys
508 MM: state 0SEMC_ACB: Process started, pid 0x100ee.
508 SEMC_ACB: Version = ACBM V3.12, debuglevel = 0x1131GMM: ResetSIM_Data
508 GMM: No valid GSM-GPRS keys
508 GMM: No valid WCDMA keys [GLD] GRAM Bank 1: 20400000 - 20800000
508 [GLD] GRAM Bank 2: 20800000 - 20C00000
508 [GLD] GRAM Bank 3 (noncached): 20C00000 - 21000000
508 [GLD] g_rgdwMemoryXRAM = (20E80000 - 20FFFFFF)* CC7 state 0
508 * CC6 state 0
508 * CC5 state 0
508 * CC4 state 0
508 * CC3 state 0
508 * CC2 state 0
508 * CC1 state 0
508 DRM: DRM_Process started
508 CCS: IdleSS: State Idle @CallMeter startedSMC_MO_1 (65672) state 4
508 SMC_MO_2 (65673) state 4
508 SMC_MT (65674) state 4
508 SMR_MO state 3
508 SMR_MT state 3
508 SetIpc_Receiver PHY_LogPointServer called by Pid=65686FSUSB: USB Mass Storage process started, pid = 0x100F2.
508 FSUSB: FAT Snooping is Disabled.[ICC-LD] ICC_Reader_0_Process Started
508 [ICC-LD] Status Changed: ICC_READER_DEACTIVATED, Reader: 0[SIM] State Changed: SIM_STATE_NULL, Appl: 0, Ref: 0SM[H324]: Turning on H324 state trace
508 CSM[CCL]: Turning off CCL state trace
508 CSM[H245]: Turning on H245 MSD state trace
508 CSM[H245]: Turning on H245 CE state trace
508 CSM[H245]: Turning on H245 MT state trace
508 CSM[H245]: Turning off H245 MT IF state trace
508 CSM[H245]: Turning off H245 RME state trace
508 CSM[H245]: Turning on H245 LC state trace
508 CSM[H245]: Turning off H245 LC Manager state trace
508 CSM[H245]: Turning off H245 CLC state trace
509 CSM[H245]: Turning off H245 RTD state trace
509 CSM[H245]: Turning off H245 MR state trace
509 M: MODULE_INIT
509 [GVI] GVI_CallQueue_PrepareCall called before GVI is ready, retry...GDFS_SRV State 1-Closed
511 GDFS: Format version 1
511 GDFS Log[1] <- Phys[1] 124754 bytes left. Erased 1 times
513 GDFS Log[5] <- Phys[2] 60085 bytes left. Erased 14 times
518 GDFS Log[2] <- Phys[3] 29131 bytes left. Erased 133 times
522 GDFS Log[4] <- Phys[4] 104370 bytes left. Erased 11 times
524 GDFS Log[0] <- Phys[5] 74672 bytes left. Erased 39 times
526 GDFS Log[6] <- Phys[6] 131060 bytes left. Erased 1 times
528 GDFS Log[3] <- Phys[7] 4243 bytes left. Erased 18 times[sysctrl] start-up cause : Watchdog reset
530 [sysctrl] Enabling UICC refresh task.
530 GDFS_SRV State 2-Opening
531 MPH: GSM Search Intervals 10 20 80 10 25 - 40 0 0 0 0
531 RH: Activate on LRRAT: G
531 RH state: Inactive
531 LLC 1: Unexpected signal #469983810
531 CAS Proxy: <From CAS> RRC_TMSI_REMOVE_REQ
531 CAS Proxy: <From CAS> RRC_DELETE_KEYS_REQ
531 CAS Proxy: <From CAS> RRC_DELETE_KEYS_REQ
531 CC: speech ver config 4 2 0 5 1 BT Dispatch signal base: 90177536 (0x5600000)
531 BT Request signal base: 15850 (0x3dea)
531 BT Response signal base: 16005 (0x3e85)
531 BT Module Internal base: 678 (0x2a6)
531 BT_UART_ON_TIMER: 685 (0x2ad)
531 EVENT_BT_EBT_STACK: 710 (0x2c6)
531 BT Signal Interval end: 982 (0x3d6)
531 BT_Ctrl_ process Id = 0x100b5
531 EBT_StackProcess_ process Id = 0x100b6
531 EILD_HCITL_Driver_Process_ process Id = 0x100c3
531 BT/EBT_sil.c: 380 SIL_OpenConnection: COM1:baud=115200 parity=N data=8 stop=1
531 RR state 0
531 CC: TTY mode = 0
531 * CC0 state 0
531 *********** FINAL FLASH DATE: 20061006 ************
531 MPH: PacketChannels activated
532 MS_TYPE = MS_EGSM900_DCS1800_PCS1900
532 MPH:SelectedModeIndex=1
532 MPH_GD_Info.SensitivityLimit_dBm[BAND_GSM900_OR_EGSM900] = -107
532 MPH_GD_Info.SensitivityLimit_dBm[BAND_DCS1800] = -107
532 MPH_GD_Info.SensitivityLimit_dBm[BAND_PCS1900] = -107
532 MPH_GD_Info.SensitivityLimit_dBm[BAND_GSM850] = -107
532 MPH_GD_Info.MinNrOfIdentifiedCellsToSkipWeakCells = 0
532 MPH: EGSM900_DCS1800
532 HW_FG: Dis Bl
532 MPH NullState
532 ENH_Control_Reset: IsPkt 0 IsARFCNsInit 0
532 ENH_Control_Reset: IsPkt 1 IsARFCNsInit 0
532 ENH_NCParameters_Reset GSM
532 ENH_NCParameters_Reset GPRS
532 ENH_NCParameters_Reset GSM
532 ENH_NCParameters_Reset GPRS
532 TCH_FACCH_BASED_AFC on TVP Server: Registration request from Client, nr=3, PID=65614
532 TVP Server: Registration request from Client, nr=4, PID=65616
532 RTS INFO: Did NOT find the signal in the registered database. Sending process: IDBGSRV_Process(65715) Signal no: 20887 Receiving process:UMTS_L2_PT (65682)EILD_HCITL.c: 585 EILD_HCITL_SetTXPin: PinLevel = 1
533 EILD_HCITL.c: 834 SetBaudRate: = 115200, Stopbits = 1
533 LLRS232/LLDEBUG : Unexpected signal 5197 from pid 100b3
533 RLP: process started
533 L2RCOP: process started
533 L2RCOP: state changed to 'Initial'
533 XX: Active MS operation mode: MS_MODE_CS_AND_PS
533 [SIM_FILE_UTIL] FCP Cache Size 80
535 HW_FG: Dis Bl
535 HW_FG: Dis Bl
535 GMM<-GMM_EXTREGISTRATIONINFO_SET_REQ
535 PHY_MasterProcess: Temperature subscription success.
535 [ICC-PD] RD(270) WR(270) VR(1..2) T1(1) D8(1) D16(1) D32(0) D64(0) RM(0) CS(0)
535 BMC: BMC_Deactivated = 1
535 SetIpc_Receiver MAC called by Pid=65680
535 SetIpc_Receiver RRC called by Pid=65680
535 RRC_MeasCtrl: EcN0 RxLevReportingArray:0 0 0 0 0 0 0 0 0 255
536 RRC_MeasCtrl: RSCP RxLevReportingArray:1 10 15 21 26 92 0 0 0 255
536 TASK: Received RRC_TMSI_REMOVE_REQ from CAS.
536 TASK: Received RRC_DELETE_KEYS_REQ from CAS.
536 TASK: Received RRC_DELETE_KEYS_REQ from CAS.
536 SL: SearchingMode = 1
536 SL: RGD GSM_MultislotClass=2
536 SL: RGD GPRS_MultislotClass=10
536 SL: RGD EGPRS_MultislotClass=10
536 SL: RGD DTM_GPRS_multislotClass=2
536 SL: RGD DTM_EGPRS_multislotClass=2
536 SL: RAT_Mode = Dual mode
536 ns_util: MS Features:2b913
536 ns_util: CFG_ENABLE_WCDMA_CALL_SUPPORT
536 ns_util: CFG_ENABLE_GSM_GPRS_CALL_SUPPORT
536 SL: SIGID_INTERVAL_START_MOD_NS_CAS = 469762048
536 SL: ProcessID = 10082
536 SL: CFG_DISABLE_SECURITY_HANDLING is NOT! defined
536 SL: DUAL_RAT_SUPPORT IS! defined
536 SL state 0
536 SL<-EVENT_SIM_STATE_CHANGED in State 0 from 100d2
536 SL: Not active
536 SL new SIM handle=0
536 SL<-R_REQ_NSAD_SERVICEMODE_GET in State 0 from 1005b
536 SL: Not active
537 ETX OK
537 ETX OK
538 MMM IMEI = 352401-01-399004-0, IMEI_SVN=12
538 DebugMux[IMEI] Length=8, TypeOfID=2, OddEven=1, Digits: 3 5 2 4 0 1 0 1 3
538 MMM EqPLMN List read from GDFS, nbr=1, 250 2
539 MMM: FastScanActive_PowerUp=0
539 MMM: FastScanActive_GSM_Registration=0
539 MMM: FastScan_SleepTimerValue=0
539 MMM: WCDMA_PLMN_Prioritized_Enabled=0
539 MMM state 0
539 MMM MS_OperationMode=0
539 GD_RXIF_DigRSSI_Compensation 0x0[lockctrl] SimLock : NOT OK, PhoneLock : NOT OK, Sim Active : NOT ACTIVE
541 MALL: **** NEW MAXIMUM HEAP 0 USAGE: 160 bytes requested in total ****
553
### WARNING! PRINT SERVER OVERFLOW, 14 PRINTOUT(S) LOST! ###
555 FS: Partition /ifs set to dirty
556 Load Module Starter: Hunt for Program Manager failed(OBEX/obex_session.c line: 2254) OBEX Started.
558 [ICC-PD] WARNING - Character Timeout waiting for receive
559 MALL: **** NEW MAXIMUM HEAP 0 USAGE: 219232 bytes requested in total ****
560 MALL: **** NEW MAXIMUM HEAP 0 USAGE: 482048 bytes requested in total ****
563 [GVI] Server Ready, started in 0.439969 s
563 [GVI] EC: 3 (ILLEGAL_OBJECT) 00000000, pid:0x100A9 (GraphicsServer_Process) cid:9 (CreateDeviceGC)AT/CFS/PrintToTraceLog_AT_CmdList: Forwarding to app layer (e.g. AAS); Commands/identifiers listed in 'at_cmds.dat':
566 AT/CFS, FwdCmd: '*'
566 AT/CFS, FwdCmd: 'VOICE_CMDS'
566 AT/CFS, FwdCmd: 'Z'
566 AT/CFS, FwdCmd: '&F'
566 AT/CFS, FwdCmd: '*EAID'
566 AT/CFS, FwdCmd: '*EALR'
566 AT/CFS, FwdCmd: '*EALS'
566 AT/CFS, FwdCmd: '*EAM'
566 AT/CFS, FwdCmd: '*EAMS'
566 AT/CFS, FwdCmd: '*EAPN'
566 AT/CFS, FwdCmd: '*EAPP'
566 AT/CFS, FwdCmd: '*EAPS'
566 AT/CFS, FwdCmd: '*EARS'
566 AT/CFS, FwdCmd: '*EASM'
566 AT/CFS, FwdCmd: '*EAST'
566 AT/CFS, FwdCmd: '*EBCA'
566 AT/CFS, FwdCmd: '*ECAP'
566 AT/CFS, FwdCmd: '*ECAR'
566 AT/CFS, FwdCmd: '*ECAS'
566 AT/CFS, FwdCmd: '*ECAW'
580
### WARNING! PRINT SERVER OVERFLOW, 194 PRINTOUT(S) LOST! ###
580 ACM.StartMain: Start of First App ok.
580 AM: MODULE_INIT_READY
580
580
580 ***************************************************************************************
580 * Sony Ericsson Mobile Communications AB
580 * Copyright 2003
580 ***************************************************************************************
580 * Build date: R1ED001 prgCXC1250200_GENERIC_CY
580 * Platform label: LDS_OSDD_U250_HB106_PRODUCT_060818_1535
580 * Platform patch label: LDS_U250_HB106_PRODUCT_060825_0059
591
### WARNING! PRINT SERVER OVERFLOW, 5 PRINTOUT(S) LOST! ###
604 MALL: **** NEW MAXIMUM HEAP 1 USAGE: 215168 bytes requested in total ****
605 FS: Partition / set to dirty
605 FSX: Unable to create mem stick directory structure - continuing anyway!GDFS_Wrapper: **** Up and running ****
620 MALL: **** NEW MAXIMUM HEAP 0 USAGE: 506208 bytes requested in total ****
622 [CLH] Server starting.
622 [CLH] OPA: IRadioControl_GetStatus = 0
623 SL<-REQUEST_CSS_NTCSD_PERIODICREPORT_ENABLE in State 0 from 100fe
623 SL: Not active
629 MALL: **** NEW MAXIMUM HEAP 1 USAGE: 225984 bytes requested in total ****
630 SL<-REQUEST_ROAMING_CURRENTPLMN_STATUS_GET in State 0 from 1010b
630 SL: Not active
632 FMRdrv: ***ERROR*** I2C Write Error, ErrorCode:0x4
632 CSATSERVICES_IMP: OnStart()!
632 CoreDebug: process up and running.
632 Core_Debug_Process: PREVIOUS DUMP
633 saveCrashDatatoGDFS: 0x6000C318, 439
633 saveCrashDatatoGDFS: 1
633 CRD_CD_Initialize(): called
633 CRD_CD_ReadEntry(): unit 1384, offset 0, buffer 0x201645E4, size 36
633 CRD_CD_ReadEntry(): OK
633 saveCrashDatatoGDFS(): Init(); MaxNumberOfCrashes 5,DataUnitNbr 1385,CrashFormatVersion 3,EncodingVersion 1,ContentVersion 1
633 CRD_CD_SaveData(): called
633 CRD_CD_WriteEntry(): unit 1387, offset 0, buffer 0x203DF8A8, size 16
633 CRD_CD_WriteEntry(): OK
633 CRD_CD_WriteEntry(): unit 1387, offset 16, buffer 0x6000C318, size 439
633 CRD_CD_WriteEntry(): OK
633 CRD_CD_WriteEntry(): unit 1384, offset 0, buffer 0x201645E4, size 36
633 CRD_CD_WriteEntry(): OK
633 CRD_CD_SaveData(): OK
633 saveCrashDatatoGDFS(): Save OK, size 439
633 saveCrashDatatoGDFS: ENDED
633 CoreDebug: Crash SMS not activated
679 MALL: **** NEW MAXIMUM HEAP 0 USAGE: 534528 bytes requested in total ****MMPROT[RTP]: RtpSetJitterDelaysForPoc - FirstDelayMs 20, NormalDelayMs 800
703 MMPROT[RTP]: RtpSetTTLsForPoc - TimeToLive_RTP_Ms 2500, TimeToLive_RTCP_Ms 1000
703 MMPROT[RTP]: RTP_Ctrl started
704 ###Downloading DSP for first time after startup of phone!###
740 ## DSP VersionIdentity: "CRH109469_R10K MIDI_PCM_ASR --- QLOTCAR_DSP_R10_Platinum Tue Jun 13 14:51:36 2006"
740 AUC INFO: Starting PostBoot. Takes a while in MoseS (5 sek)
775 HW_FG: En ChBT/EBT_sil.c: 399 SIL_OpenConnection: Start event OK!
816 DRM: Init OK
816 DRM_PRS: DRM_PRS_Process started
821 GDFS_SRV Queue full
821 SPBC Process started
826 MSG: msgmain.c: State 255
826 CBS: cbs_main.c: EVENT_SIM_STATE_CHANGED accepted
826 CBS: cbs_main.c: SIM STATE 0, process 0MMPROT[SIP]: SIP started
831 GDFS_WR State 1-Closed
831 GDFS_WR Start check
839 BATT: Battery type is TYPE 1
839 BATT: Compensated VBAT (3736 mV) based remaining capacity is 19.4
877 GDFS Free Blk 0 Ok
877 GDFS_WR Check done
877 GDFS_SRV State 3-Open
878 GDFS_WR State 2-OpenBT/BT.c: BT_RECEIVE_W_TMO: Timeout after 500 ms
909 EILD_HCITL.c: 1681 UART ClockRequest: ON
909 BT/EBT_sil.c: [Tx] HCI_Reset:
909 EILD_HCITL.c: 1799 PowerManagement: Wake-up from sleep mode:
909 EILD_HCITL.c: 1428 R_Do_Send:
909 2034E248 .... 01 03 0C 00
925 GDFS_SRV Queue empty
930 Handle_Shell_Timeout: Time-out from non-existent timer: 6000bd98 - Ignored.
930 Handle_Shell_Timeout: Time-out from non-existent timer: 6000bd98 - Ignored.EILD_HCITL.c: 1526 Done_Receive:
932 2033180A ....... 04 0E 04 02 03 0C 00
932 BT/EBT_sil.c: [Rx] HCI_Command_Complete_Event:
932 BT/BT.c: 6325 HCI_CONFIGURE_PORT_CNF:
932 BT/BT.c: 6314 HCI_START_CNF:
1061 *** PID started 65625. ***
1061 *** Test code: .... disabled. ***
1061 *** Runtime checks: disabled. ***
1061 *** Fatal errors: . enabled. ***
1061 *** Debug traces: . disabled. ***
1062 SM: Received REQUEST_PS_PERIODICREPORT_ENABLE
1062 CAS Proxy: <From CAS> PDCP_PERIODIC_REPORT_ENABLE_REQ
1062 SNDCP: SNDCP_PERIODIC_REPORT_ENABLE_IND
1062 SL<-REQUEST_CSS_NTCSD_PERIODICREPORT_ENABLE in State 0 from 10054
1062 SL: Not active
1090 CHARGING DATA: Vch 3750, Ich 90, Vbat 3756, Ibat 0, VFET 0, IFET 0, PDiss 5701, Temp 24
1132 [ICC-PD] WARNING - Character Timeout waiting for receive
1132 [ICC-PD] Fi: 1 Di: 1
1138 [ICC-PD] WARNING - Character Timeout waiting for receiveThe CheckIfMoreResets procedure has been activated.
1150 State = 30, NrOfTriesOfReset = 2.
1162 [SIM] *** ERROR *** No Card Present
1162 [SIM] InitialiseCard SIM_APPLICATION_UNKNOWN
1162 [SIM] WARNING - Destruction of Application Parameters
1162 [SIM_FILE_UTIL] Used Cache Records 0
1162 [SIM_FILE_UTIL] Max Cache Records 80
1162 [SIM] WARNING - Destruction of Card Parameters
1162 [SIM] State Changed: SIM_STATE_POWER_OFF, Appl: 0, Ref: 0[lockctrl] SimLock : NOT OK, PhoneLock : NOT OK, Sim Active : NOT ACTIVE
1162 SL<-EVENT_SIM_STATE_CHANGED in State 0 from 100d2
1162 SL: Not active
1162 SL new SIM handle=0
### @MMI shut down the Print Server! ###
###################################################################################
@@@ Print Process Queue @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
[SIMUTIL] InitialiseSimManagerData SIM not present.
[CLH] Server started OK.
CSATSERVICES_IMP: SAT Services starting NOT OKAY!
AT/ AT-3; Received Sig:'EVENT_SIM_STATE_CHANGED'(216018176) from:'UICC_Master_Process', e
xecuting SIM_OnEvent_SIM_StatusChanged()
AT/ AT-3; Received Sig:'REQUEST_AT_GET_STATE_OF_ACTIVE_CHANNELS'(65011904) from:'@AT_COMM
AND_SERVER', executing CFS_OnRequest_AT_GetStateOfActiveChannels()
[SIMUTIL] Error OPA_UE_RESOURCE_EXIST reported from line 123 in 'CSimUtilityManager_imp.
c'.
[GVI] EC: 20 (DEVICE_NOT_INSTALLED) 00000000, pid:0x10101 (GraphicsServer_Process) cid:
104 (GetOriginalDisplayUpdateOrientation)
SEMC UI_DISPLAY Line:214 OPA_ErrorCode: OPA_UEE_INPARAM_VALUE
SEMC UI_DISPLAY Line:286 OPA_ErrorCode: OPA_UEE_INPARAM_VALUE
MALL: **** NEW MAXIMUM HEAP 0 USAGE: 568480 bytes requested in total ****
Последний раз редактировалось gsm-brest; 17.10.2007 в 09:44. |
|
|
|
15.10.2007, 19:20
|
#3 |
|
Сенсей
|
Re: W850 моргалик
Default version: R1EJ001 а ты шьёшь версию ниже: R1ED001
Сониерик, конечно не Нокия, чтоб умирать от понижения. Но чего в жизни не бывает. Всётаки прошей ему R1EJ001. И дебагерный лог, у тебя не полный, надо было ещё подождать. Пока не пойдёт просто куча цифр. Перед этими цифрами, тел покажет окончательную ошибку, почему он не стал включаться. Хотя, и так уже видно, что ругвется на дисплей. Либо новый шлейф вам попался дохлый, либо дисплей неисправен. И погляди ещё пайку разъёмов шлейфа. |
|
|
|
Пользователь добавил плюс
|
|
| Здесь присутствуют: 1 (пользователей: 0 , гостей: 1) | |
|
|
