Ппривет всем
Такая беда
Samsung E840 слайдер 8пинвый 8-gnd. 7-tx 5-rx
При вкл. Пишет enter bin password
Прошивка [flash[CKT26_05C_PCB01_GPRS_MT6226_S00.EAGLE601_2_01_TLXX 0V0SA75XXXX_810.BIN]]
При формате пишет
... Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC22E000000000:29EA0000000000
flash: Samsung AMD/Fujitsu std [T 0008x002000 007Fx010000] 8Mb
detecting chip #01 in region #00...
flash: EC22E000000000:F9027300000000
flash: Samsung AMD/Fujitsu std [T 0008x002000 007Fx010000] 8Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
921600
Set baud Done
Check space...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC22E000000000:29EA0000000000
flash: Samsung AMD/Fujitsu std [T 0008x002000 007Fx010000] 8Mb
detecting chip #01 in region #00...
flash: EC22E000000000:F9027300000000
flash: Samsung AMD/Fujitsu std [T 0008x002000 007Fx010000] 8Mb
number of flash chip/regions detected: 02/01
total flash region size: 01000000
detect device identification, method #1...
detection phase #1...
detect device parameters finished
structure: 2nd [standard] (or higher) generation
protocol ver: 04
ver. sw1: CKT26_05C_PCB01_GPRS_MT6226_S00.EAGLE601_2_01_TLXX 0V0SA75XXXX_810.BIN
ver. sw2: EAGLE601_2.01_TLXX0V0SA75XXXX_810
ffs offset/size: 00E00000/00200000
detecting eeprom area in 2 chip(s)...
flash: EC22E000000000:29EA0000000000
checking area[00000000]: 00000000-007FFFFF...
flash: EC22E000000000:F9027300000000
checking area[00800000]: 00000000-007FFFFF...
eeprom found near: 00E00000
detecting eeprom size...
eeprom size: 00200000
eeprom chip: 01
eeprom area: 00800000:00600000-007FFFFF
reading [flash[CKT26_05C_PCB01_GPRS_MT6226_S00.EAGLE601_2_01_TLXX 0V0SA75XXXX_810.BIN]]...
file saved: backup_flash[CKT26_05C_PCB01_GPRS_MT6226_S00.EAGLE601_2_01_TLXX 0V0SA75XXXX_810.BIN]_20071011-185651.B0M.bin
Finished, time used: 518 sec
Remove/Install battery now !

Судя по логу, ты fullflash считываешь, а не форматируешь.