Тестирование Новых возможностей BEST'a -II [Архив] - Страница 2

MOleg

16.03.2011, 12:35

С5-00 на версии 1.17
Отказывается видеть телефон (USB) в TEST mode
Соответственно не проходит финализация при прошивке телефона.
как только кабель вынимается из телефона, в программе появляется сообщение о подключенном телефоне.

Connect phone on selected interface...

Core version : 1.17 , Rev : 2.3

Selected FlashSettings : FullFlash
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm645_032.010_prd.core.fpsx
PPM : rm645_032.010_05.01_Russian_prd.rofs2.fpsx
PPM2 : rm645_032.010_C00.01_DEFAULT_prd.rofs3.fpsx
CNT : rm645_ENO_v_0.NCP17_APEONLY.fpsx
APE : rm645_032.010_U000.000_prd.uda.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000030000022600010007600C192102031104
EM0 ID: 00000C35
EM1 ID: 00000C30
PUBLIC ID: 15C0000FBC9C0344FE9927C2A230EF48BDA92A64
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 11.4.0
Processing RAWLOADER...
FLIC : 00400020
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 11.4.0
Boot Done! :)
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
ADL: phone is in flash mode

Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 353792040948015
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Cert Read done!

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : C:\InfinityBox\BEST\Backup\Cert\353792040948015_CR T_2nd.rpl

===Flashing [MCU]===
Erase : Processing rm645_032.010_prd.core.fpsx
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm645_032.010_prd.core.fpsx
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [SOS+PMML]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [SOS*UPDAPP]
CMT: Writing Hash CERT [SOS*DSP0]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [SOS*ISASW]
CMT: Writing Hash CERT [SOS+CORE]
CMT: Writing Hash CERT [SOS+ROFS1]
Total writen 388 blocks
TIME : Write time : 00:00:16
MCU Write done
ADL: Request programm status
NAND status : 0000000C / 00000001 / 00000000

===Flashing [PPM]===
Erase : Processing rm645_032.010_05.01_Russian_prd.rofs2.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm645_032.010_05.01_Russian_prd.rofs2.fpsx
CMT: Writing Hash CERT [SOS+ROFS2]
Total writen 194 blocks
TIME : Write time : 00:00:07
PPM Write done
ADL: Request programm status
NAND status : 0000000C / 00000001 / 00000000

===Flashing [PPM2]===
Erase : Processing rm645_032.010_C00.01_DEFAULT_prd.rofs3.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm645_032.010_C00.01_DEFAULT_prd.rofs3.fpsx
CMT: Writing Hash CERT [SOS+ROFS3]
Total writen 2 blocks
TIME : Write time : 00:00:00
PPM Write done
ADL: Request programm status
NAND status : 0000000C / 00000001 / 00000000

===Flashing [CNT]===
Erase : Processing rm645_ENO_v_0.NCP17_APEONLY.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm645_ENO_v_0.NCP17_APEONLY.fpsx
CMT: Writing Hash CERT [SOS*ENO]
Total writen 11 blocks
TIME : Write time : 00:00:00
CNT Write done
ADL: Request programm status
NAND status : 0000000C / 00000001 / 00000000

===Flashing [APE]===
Erase : Processing rm645_032.010_U000.000_prd.uda.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm645_032.010_U000.000_prd.uda.fpsx
Total writen 8 blocks
TIME : Write time : 00:00:00
APE Write done
ADL: Request programm status
NAND status : 0000000C / 00000001 / 00000000

ADL: Close_Session
Content: 0003000000000C0000000100000000
ADL: Reboot

Flashing done!
Total flash time : 00:00:26
Reboot phone now...

Phone found!
Series 60 Device detected!
read info... - Ok

Reading Phone Info....
Connected phone - Nokia C5-00
Software ver : V ICPR82_10w18.5.2 16-07-10 RM-645 (c) Nokia
IMEI : 353792040948015
Ape Ver : 032.010
APE Var : 032.010032.010.05.01032.010.C00.01
APE ADSP: 256
DSP Ver : ICPR82_10w18.5.1
APE Test: rm645_ENO_v_0.ncp71_17_001
PPM :
CNT :
Product SN : CZE988357
Product code : 0593669
Base Prd.code: 0591907
Module code : 0204492
Long Prod.SN : 0
Hardware info=======
HWID : 6000
Retu : 35
Tahvo : 00
Batery: 3847 mV
Camera:
CMT BT:
APE BT: HCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12652.
APE HW: 256
LCDVer:
RF ic :
Lock info ===========
IMEI : 353792040948015
IMEI spNet : 3A 35 97 02 04 49 08 01
IMEI svNet : 33 35 97 02 04 49 08 11 F1

Conf key : 0000000000000000
Provider key : 2440700000000000
Provider : AT&T;U.S.A. (3650)
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 7

LOCK STATUS :
=============================
BLK : 1
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS : All Open
=============================
CRT308 Backup Created... :)

User code : Crypted
UserDataExLevel : Low [Gallery]

Done!

На версии 1.16 проблем нет никаких. Видится в Test Mode, и финализируется без проблем.

Connect phone on selected interface...

Core version : 1.16 , Rev : 2.1

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm645_032.010_prd.core.fpsx
PPM : rm645_032.010_05.01_Russian_prd.rofs2.fpsx
PPM2 : rm645_032.010_C00.01_DEFAULT_prd.rofs3.fpsx
CNT : rm645_ENO_v_0.NCP17_APEONLY.fpsx
APE : rm645_032.010_U000.000_prd.uda.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000030000022600010007600C192102031104
EM0 ID: 00000C35
EM1 ID: 00000C30
PUBLIC ID: 15C0000FBC9C0344FE9927C2A230EF48BDA92A64
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 10.50.0
Processing RAWLOADER...
FLIC : 00400020
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 10.50.0
Boot Done! :)
TIME : Boot time : 00:00:01
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
ADL: phone is in flash mode

Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 353792040948015
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Cert Read done!

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : F:\my soft\Best\Backup\Cert\353792040948015_CRT.rpl

===Flashing [MCU]===
Erase : Processing rm645_032.010_prd.core.fpsx
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm645_032.010_prd.core.fpsx
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [SOS+PMML]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [SOS*UPDAPP]
CMT: Writing Hash CERT [SOS*DSP0]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [SOS*ISASW]
CMT: Writing Hash CERT [SOS+CORE]
CMT: Writing Hash CERT [SOS+ROFS1]
Total writen 388 blocks
TIME : Write time : 00:00:16
MCU Write done
ADL: Request programm status
NAND status : 0000000C / 00000001 / 00000000

===Flashing [PPM]===
Erase : Processing rm645_032.010_05.01_Russian_prd.rofs2.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm645_032.010_05.01_Russian_prd.rofs2.fpsx
CMT: Writing Hash CERT [SOS+ROFS2]
Total writen 194 blocks
TIME : Write time : 00:00:07
PPM Write done
ADL: Request programm status
NAND status : 0000000C / 00000001 / 00000000

===Flashing [PPM2]===
Erase : Processing rm645_032.010_C00.01_DEFAULT_prd.rofs3.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm645_032.010_C00.01_DEFAULT_prd.rofs3.fpsx
CMT: Writing Hash CERT [SOS+ROFS3]
Total writen 2 blocks
TIME : Write time : 00:00:00
PPM Write done
ADL: Request programm status
NAND status : 0000000C / 00000001 / 00000000

===Flashing [CNT]===
Erase : Processing rm645_ENO_v_0.NCP17_APEONLY.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm645_ENO_v_0.NCP17_APEONLY.fpsx
CMT: Writing Hash CERT [SOS*ENO]
Total writen 11 blocks
TIME : Write time : 00:00:00
CNT Write done
ADL: Request programm status
NAND status : 0000000C / 00000001 / 00000000

===Flashing [APE]===
Erase : Processing rm645_032.010_U000.000_prd.uda.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm645_032.010_U000.000_prd.uda.fpsx
Total writen 8 blocks
TIME : Write time : 00:00:00
APE Write done
ADL: Request programm status
NAND status : 0000000C / 00000001 / 00000000

ADL: Close_Session
Content: 0003000000000C0000000100000000
ADL: Reboot

Flashing done!
Total flash time : 00:00:27
Reboot phone now...

Reading Phone Info....
Connected phone - Nokia C5-00
Software Info: V ICPR82_10w18.5.2 16-07-10 RM-645 (c) Nokia
IMEI: 353792040948015
Ape Version: 032.010
Product code: 0593578
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
FullFactorySet...OK!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Product code update...
Set phone to Normal mode...
AfterFlash operations done...
Done!

Elapsed: 00:00:51
Connect phone on selected interface...

На 1.18 не тестил, думаю, суть будет такая же...

mixanik

17.03.2011, 10:07

принесли 5130, выключается через некоторое время,
Check SL/SD/Security:Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Checking StartUp data ...
-----------------------
SDD Key status : SDData Damaged!!!!! :(
SimLock status : SimLock is Ok
Security status : Security is Ok
-----------------------

PA_SimLock Version :
PA_SL3 phone detected

Done!

repair SDD Repair SD procedure started...

Phone Imei: 351508046757990
Key file exists, no need to read...
Check phone mode...
Phone in Normal mode
Seting Test mode... wait...
Test mode set
Writing Super Dongle Key... Ok!
Done!

Checking StartUp data ...
-----------------------
SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!! :(
-----------------------

PA_SimLock Version :
PA_SL3 phone detected

Done!

при этом CHECK через Best'ом через коробку JAF Switch jaf to FBUS...
FbusMode set Ok

Phone connected
IMEI : 351508046757990
Simlock status : Simlock is Ok
Security status : Security is Ok

Ready for operations...

ЛОГ Scan через MXkey (коробка)JafPhone Type: RM-495 (Nokia 5130c-2)
SW Version: V 07.95 03-02-10 RM-495 (c) Nokia
Imei plain: 35150804675799-0
Language Pack:
- not available.

This is SL3 phone(Simlock2 format).
- Avoid SW Downgrade & manual erase to this phone !

SIMLOCK seems to be valid
SUPERDONGLE_KEY seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST failed!

Imei net: 351508046757990
Version: SIMLOCK SERVER
Counter: 0/3, 0/10

CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000

сразу 2 чека BEST через JAF подряд, почему-то с первого раза IMEI не прочитался Read and Check phone data...
Checking BUS...
Switch jaf to FlashMode...
FlashMode set Ok
Booting phone...

BOOT 1ST : C0

CMT part info :
CMT ASICID : 000000010000022600010006030C192101033000
CMT EM0 ID : 00000296
CMT EM1 ID : 00000B22
CMT PUB ID : 0160010854498E56AEDC59CA76257A6EDFB68A58
CMT MODE ID : 00
CMT R_HASH : 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT ROM ID : 273F6D55DFAAF68F

CMT : Sending 2nd loader...
Use : RAP3Gv3_2nd.fg
CMT Loader sent, Boot Ok
MCU configuration
CMT Flash ID : 89820089 < INTEL => 0046L0Y1GG/NU48F512
FLASHID : 89820089 , CMT , NOR
FLCNT : 00000000000000000000000000000000000000
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
FLASHID : 0000FFFF , CMT , MMC , EXT
TransmissionReq : 16 bit, Single
TransmissionReq : Accepted, 16 bit, Single
Sending ALGO....
Use : RAP3Gv3_algo.fg
CMT Algo sent!
TransmissionReq : 32 bit, Dual
TransmissionReq : Accepted, 32 bit, Dual
Boot done!

Switch jaf to FBUS...
FbusMode set Ok

Phone connected
IMEI : 12345610654321?
Simlock status : Simlock is Ok
Security status : Security is Ok

Ready for operations...

Read and Check phone data...
Checking BUS...
Switch jaf to FlashMode...
FlashMode set Ok
Booting phone...

BOOT 1ST : C0

CMT part info :
CMT ASICID : 000000010000022600010006030C192101033000
CMT EM0 ID : 00000296
CMT EM1 ID : 00000B22
CMT PUB ID : 0160010854498E56AEDC59CA76257A6EDFB68A58
CMT MODE ID : 00
CMT R_HASH : 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT ROM ID : 273F6D55DFAAF68F

CMT : Sending 2nd loader...
Use : RAP3Gv3_2nd.fg
CMT Loader sent, Boot Ok
MCU configuration
CMT Flash ID : 89820089 < INTEL => 0046L0Y1GG/NU48F512
FLASHID : 89820089 , CMT , NOR
FLCNT : 00000000000000000000000000000000000000
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
FLASHID : 0000FFFF , CMT , MMC , EXT
TransmissionReq : 16 bit, Single
TransmissionReq : Accepted, 16 bit, Single
Sending ALGO....
Use : RAP3Gv3_algo.fg
CMT Algo sent!
TransmissionReq : 32 bit, Dual
TransmissionReq : Accepted, 32 bit, Dual
Boot done!

Switch jaf to FBUS...
FbusMode set Ok

Phone connected
IMEI : 351508046757990
Simlock status : Simlock is Ok
Security status : Security is Ok

Ready for operations...

после восстановление SDD через BEST телефон упал в "Contact service" через МХ залить PM не получается, ругается на SDD, после "восстановления" SDD MX-ом и проливки читого PM тело завелось.
Лог Check SL/SD/Security Checking StartUp data ...
-----------------------
SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security is Ok
-----------------------

PA_SimLock Version :
PA_SL3 phone detected

Done!
через JAF check тот же, ничего не изменилось "Security status : Security is Ok"
лог инфо Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Reading Phone Info....
Connected phone - Nokia 5130c-2
Software ver : V 07.95 03-02-10 RM-495 (c) Nokia
IMEI : 351508046757990
Ape Ver :
APE Var :
APE ADSP:
DSP Ver : ICPR72_10w01
APE Test:
PPM : V 07.95 03-02-10 RM-495 (c) Nokia EL
CNT : Content: el_red V 07.95 03-02-10 RM-495 (c) Nokia
Product SN : HEC309758
Product code : 0572174
Base Prd.code: 0567772
Module code : 0204024
Long Prod.SN : 0
Hardware info=======
HWID : 1000
Retu : 16
Tahvo : 22
Batery: 3857 mV
Camera:
CMT BT: 2222-302
APE BT:
APE HW:
LCDVer: SEIKO
RF ic :
Lock info ===========
IMEI : 351508046757990
IMEI spNet : 3A 15 05 08 64 57 97 09
IMEI svNet : 33 15 05 08 64 57 97 49 F8

Conf key : 0000000000000000
Provider key : 2440700000000000
Provider : AT&T;U.S.A. (3650)
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 7

LOCK STATUS :
=============================
BLK : 1
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS : All Open
=============================
CRT308 Backup Created... :)

User code : Crypted
MMC pwd : no any record found
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery]

Done!

после SDD телефон ушел в контакт сервис, по USB подцепить не получилось, через JAF Upload Tune не активна :(

JayDi

17.03.2011, 10:40

а после sx4 + upload tune сделать Бестом было трудно?
JAF добавлен для прошивки и чтения ключа. Остальное пока в стадии добавления.
А вот через UFS все бы прошло, или через USB.

GSMReanim@tor

18.03.2011, 13:54

Как загрузить на сервер BESTa расчитанный через ATF файл (ххххххх.bcl)

При неподключенном телефоне - Upload Job, выбрать файл.

PANsoft

18.03.2011, 15:58

Как загрузить на сервер BESTa расчитанный через ATF файл (ххххххх.bcl)

При неподключенном телефоне - Upload Job, выбрать файл.

Ващето в FAQ это все расписано...

Sedy

18.03.2011, 15:59

Замечен глюк в разделе RPL использую версию 1.18.5 и интерфейсе UFS.

Ставлю галочку на Erase (RPL) Далее стираю NPC, ССС и HWC все стирается отлично, потом галочку ставлю на Write Жму Write RPL выбираю файл-rpl и программа вместо того чтобы записать рпл она опять только его стирает и ничего не записывает.
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAP3Gv3_algo_v1331.fg , Rev : 0.0 Ver : 1.33.1
CMT Algo sent
CMT PAPUB : 917F11196FDB7378C18EF7260698CA4489DCA02700
Transmission mode : Dual (Ddr, TX2)

Boot Done!

Preparing for write certificates...

CMT : NPC erase Ok

CMT : CCC erase Ok

CMT : HWC erase Ok

Done!

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

JayDi

18.03.2011, 16:18

Странно, только что проверил на 6300 - раза три стер/записал...
попробуйте перезапустить и проверить еще раз, пожалуйста.

Sedy

18.03.2011, 16:24

Странно, только что проверил на 6300 - раза три стер/записал...
попробуйте перезапустить и проверить еще раз, пожалуйста.

Извените забыл написать у меня модель 5130 SL3 может поэтому???

ЗЫ Хотя я всетаки грешу на сам UFS. возможно он у меня нехочет записывать.

JayDi

18.03.2011, 16:30

Не в модели дело, перекачайте версию с поддержки и повторите процедуру еще раз, пожалуйста.
Обновили чуток, но, этот момент не трогался.

Sedy

18.03.2011, 16:39

Не в модели дело, перекачайте версию с поддержки и повторите процедуру еще раз, пожалуйста.
Обновили чуток, но, этот момент не трогался.

Всетаки мой UFS глючит на запись в новой версии появился лог состоянии записи RPL.

card found: S/N 68xxxxx
registered to: Sedy

Connect phone on selected interface...

UFS S/N 38442 boot - Ok

Connect phone on selected interface...

Will Write RPL keys now...
Check RPL file...
NPC Data found!
CCC Data found!
HWC Data found!
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000010000022600010006030C192101033000
CMT EM0 ID : 00000296
CMT EM1 ID : 00000B22
CMT PUB ID : 192001138E8B8E56BDE1AFB073994EDC1855C968
CMT MODE ID : 00
CMT R_HASH : 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT ROM ID : 273F6D55DFAAF68F

CMT : Sending 2nd loader...
Use : RAP3Gv3_2nd.fg , Rev : 0.0 Ver : 10.42.0
CMT Loader sent, Boot Ok
MCU Configuration
FLASHID : 89820089 , CMT , NOR
CMT Flash ID : 89820089 < INTEL => 0046L0Y1GG/NU48F512
FLCNT : 000000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAP3Gv3_algo.fg , Rev : 0.0 Ver : 10.40.0
CMT Algo sent
PAPUBkeys blank (erased or HW failure)
Transmission mode : Dual (Ddr, TX2)

Boot Done!

Preparing for write certificates...

CMT : NPC erase Ok
Programming report : Error NPC

CMT : CCC erase Ok

CMT : HWC erase Ok

Done!

Connect phone on selected interface...

Jaf лог джафа

Preparing for write certificates...

Erase NPC... Ok
Writing NPC... Ok

Erase CCC... Ok
Writing CCC... Ok

Erase HWC... Ok
Writing HWC... Ok

Cert write done!

Ready for operations...

JayDi

18.03.2011, 18:10

интересно, но версией 1.17.1 и 1.18 beta писал именно в 5130 сертификаты, стирал, издевался - работало без проблем. Так что, если будет возможность - проверьте на одной из них.
Сейчас на руках не имею, но попробую в ближайшее время достать и проверить.

AABBCC

18.03.2011, 19:13

BEST V18.5, Nokia N97 mini RM-555 лоченая. ROOT KEY HASH: 479C6DDE3942E12C429C1D6ADED80371
Поключен по USB в нормальном режиме. Нажимаю GET PA_VER и вижу вот такое.
Phone found!
Series 60 Device detected!
read info... - Ok

Checking SL version now...
Check communication with phone....
Reboot....
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000010000022600010006400C192101051103
EM0 ID: 00000296
EM1 ID: 00000B22
PUBLIC ID: 1A20010FE88E00523CEA1E67AC01E4414CC5885F
ASIC MODE ID: 00
ROOT KEY HASH: 479C6DDE3942E12C429C1D6ADED80371
ROM ID: 4B9B75103E691FF8
Error finding bootdata or ASIC not supported!

Looks like ASIC not supported, or HW failure
Supported : RapuYama, RAP3Gv4, BroadComm
Try Flash latest SW and repeat, if phone in supported list

Phone disconected!

Connect phone on selected interface...

Это нормально? Так и должно быть?
Дальше.
Поключен через JAF. Нажимаю GET PA_VER , тут всё нормально.
Ready for operations...

Opening Connection...
Device Location: 00000031
Connect Ok!
Initializing Connection...
JAF Firmware: 01.B4
Authentificate JAF BOX...
TEA Authentication Completed...

JAF S/N ODJAF000 boot - Ok

Connect phone on selected interface...

Ready for operations...

Checking SL version now...
Checking BUS...
Switch jaf to FlashMode...
FlashMode set Ok
Booting phone...

BOOT 1ST : C0

CMT part info :
CMT ASICID : 000000010000022600010006400C192101051103
CMT EM0 ID : 00000296
CMT EM1 ID : 00000B22
CMT PUB ID : 1A20010FE88E00523CEA1E67AC01E4414CC5885F
CMT MODE ID : 00
CMT R_HASH : 479C6DDE3942E12C429C1D6ADED80371
CMT ROM ID : 4B9B75103E691FF8

Change Protocol : NEW

Using NEW Flashing Protocol

CMT : Sending 2nd loader...
Use : RAPIDOv11_2nd.fg
CMT Loader sent, Boot Ok
Trans Req : 32 bit, DualLine, Set : 32 bit, DualLine
CMT Flash ID : 005800EC < UNKNOW [NOT IN BASE]
FLIC : 005800EC , NAND , CMT

Sending Algo...
Use RAPIDOv11_XSR15_alg.fg
Finalize done, Algo sent!
Trans Req : 32 bit, DualLine, Set : 32 bit, DualLine
PapubKeysReq : C49131EB98702B6A39D7F285B1FF2D9BE1D6F863A0
Boot done!

CMT : Read PASUBTOC certificate...

PA_INFO :
DETECTED SL : PA_SL3

Done

Ready for operations...

Поключен через JAF. Нажимаю Rd Key:
Ready for operations...

Opening Connection...
Device Location: 00000031
Connect Ok!
Initializing Connection...
JAF Firmware: 01.B4
Authentificate JAF BOX...
TEA Authentication Completed...

JAF S/N ODJAF000 boot - Ok

Connect phone on selected interface...

Ready for operations...

Read Uniq key data started...

Checking BUS...
Switch jaf to FlashMode...
FlashMode set Ok
Booting phone...

BOOT 1ST : C0

CMT part info :
CMT ASICID : 000000010000022600010006400C192101051103
CMT EM0 ID : 00000296
CMT EM1 ID : 00000B22
CMT PUB ID : 1A20010FE88E00523CEA1E67AC01E4414CC5885F
CMT MODE ID : 00
CMT R_HASH : 479C6DDE3942E12C429C1D6ADED80371
CMT ROM ID : 4B9B75103E691FF8

Error finding required loader... :(

Ready for operations...

Error fetching data... :(

Read fail...!

Ready for operations...

То есть разлочить этот TA BEST-ом я не смогу? Только ATF, я правильно понимаю?

vano

18.03.2011, 19:22

То есть разлочить этот TA BEST-ом я не смогу? Только ATF, я правильно понимаю?
разлочить BEST-ом можно, но для этого надо вычитать из него файл ("*.sha" или "*.bcl") при помощи ATF

AABBCC

18.03.2011, 19:31

разлочить BEST-ом можно, но для этого надо вычитать из него файл ("*.sha" или "*.bcl") при помощи ATF
Жаль, что пока не получается полностью избавиться от ATF-зависимости. Уже чуть-чуть осталось)).

JayDi

18.03.2011, 20:27

AABBCC, Get Pa работает
UFS - RAP3, RAPIDO (OLD hashes)
JAF - Все, кроме BCM(USB only) и новых RAPU
USB - BCM/RAPU/RAP4

а с хэшами - разбираемся потиху.

PANsoft

18.03.2011, 22:12

Сорри за оффтоп, но всеж хочу сразу предупредить любителей задать в аське вопрос типа "а когда" "а будет" и т.п. все без исключения на подобные вопросы будут посланы на три буквы. Без обьяснения причин. Т.ч. без обид господа. В софте будет все, а когда и как - вот когда сделаем, тогда и будет. И никак иначе.
ЗЫ: Касается не только новых хешей... А и всего остального.

Alva

18.03.2011, 23:25

можно полюбопытствовать, каким образом в N8 можно пролить заводской rpl?

DrManila

19.03.2011, 00:26

Alva, в N8 не лил, а в C7 пролился без проблем. Думаю разницы между ними нет особой.
1.18 beta
пролил сегодня ей RPL в 5130 через UFS, прошло со второго раза, но в итоге результат положительный.

JayDi

19.03.2011, 04:00

DrManila, логи, плиз.

Alva, выбираем ключи для записи, жмем write RPL, кабель в тело.
Все.

leomin

19.03.2011, 08:43

Nokia 6303 RM-443, версия BEST 1.18.5, запись RPL с помощью UFS:
card found: S/N
registered to: leomin

Connect phone on selected interface...

UFS S/N 56*** boot - Ok

Connect phone on selected interface...

Read and Check phone data...
BB5 bus checking...
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000010000022600010006030C192101033000
CMT EM0 ID : 00000295
CMT EM1 ID : 00000B22
CMT PUB ID : 0FF00003B5757F56D59175740913287058C29487
CMT MODE ID : 00
CMT R_HASH : 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT ROM ID : 273F6D55DFAAF68F

CMT : Sending 2nd loader...
Use : RAP3Gv3_2nd.fg , Rev : 0.0 Ver : 10.42.0
CMT Loader sent, Boot Ok
MCU Configuration
FLASHID : 89820089 , CMT , NOR
CMT Flash ID : 89820089 < INTEL => 0046L0Y1GG/NU48F512
FLCNT : 00000000000000000000000000000000000000
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAP3Gv3_algo_v1331.fg , Rev : 0.0 Ver : 1.33.1
CMT Algo sent
CMT PAPUB : E6E2AB6C2D394BC82633D2B4965E7E519E2FB25E00
Transmission mode : Dual (Ddr, TX2)

Boot Done!

Init Service mode... Wait...

SimLock status : SimLock is Ok
Security status : Security is Ok
SDD Key status : SDData Damaged!!!!! :(

PA_SimLock Version :
PA_SL phone detected

Done!

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Will Write RPL keys now...
Check RPL file...
NMP RPL Detected, converting...
Convert done!
NPC Data found!
CCC Data found!
HWC Data found!
SimLock Data found!
SimLock key found!
SuperDongle Key found!
CMLA key found!
WMDRM key found!
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000010000022600010006030C192101033000
CMT EM0 ID : 00000295
CMT EM1 ID : 00000B22
CMT PUB ID : 0FF00003B5757F56D59175740913287058C29487
CMT MODE ID : 00
CMT R_HASH : 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT ROM ID : 273F6D55DFAAF68F

CMT : Sending 2nd loader...
Use : RAP3Gv3_2nd.fg , Rev : 0.0 Ver : 10.42.0
CMT Loader sent, Boot Ok
MCU Configuration
FLASHID : 89820089 , CMT , NOR
CMT Flash ID : 89820089 < INTEL => 0046L0Y1GG/NU48F512
FLCNT : 00000000000000000000000000000000000000
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAP3Gv3_algo_v1331.fg , Rev : 0.0 Ver : 1.33.1
CMT Algo sent
CMT PAPUB : E6E2AB6C2D394BC82633D2B4965E7E519E2FB25E00
Transmission mode : Dual (Ddr, TX2)

Boot Done!

Preparing for write certificates...

CMT : NPC erase Ok
Writing NPC... Ok

CMT : CCC erase Ok
Writing CCC... Ok

CMT : HWC erase Ok
Writing HWC... Ok

Init Service mode... Wait...

Check phone mode...
Phone in Local mode
Seting Test mode... wait...
Test mode set

Writing SimLock Key... Ok!
Writing SimLock Data... Ok!
Writing Super Dongle Key... Ok

SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!! :(

Done!

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Local SX4 procedure started...

Phone Imei: 353**********
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000010000022600010006030C192101033000
CMT EM0 ID : 00000295
CMT EM1 ID : 00000B22
CMT PUB ID : 0FF00003B5757F56D59175740913287058C29487
CMT MODE ID : 00
CMT R_HASH : 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT ROM ID : 273F6D55DFAAF68F

CMT : Sending 2nd loader...
CMT Loader sent, Boot Ok
rap= 0FF00003B5757F56D59175740913287058C29487
hash= 9DDBFCFE6E73CED7D8C6268C8EB85723
key= 89645A9B31B41E9F3C6EB56667B6B7B7F9F254F2
Init Service mode... Wait...

Key file updated...
Step 1...
Step 2...
Step 3...
SX4 Auth - Ok
Done!

Uploading RF/Battery tune to phone...
Using : RM-443.pm
Operating mode is OK, no need change...

Field 1
Record 0 write - Ok
Record 2 write - Ok
Record 4 write - Ok
Record 6 write - Ok
Record 8 write - Ok
Record 11 write - Ok
Record 12 write - Ok
Record 13 write - Ok
Record 16 write - Ok
Record 18 write - Ok
Record 21 write - Ok
Record 29 write - Ok
Field 309
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 4 write - Ok
Record 7 write - Ok
Record 17 write - Ok

Check ST_SECURITY now...
Security status : ST_SECURITY => OK

Done!

Elapsed: 00:00:03

Read and Check phone data...
SimLock status : SimLock is Ok
Security status : Security is Ok
SDD Key status : SD Data is Ok

PA_SimLock Version :
PA_SL3 phone detected

Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000010000022600010006030C192101033000
CMT EM0 ID : 00000295
CMT EM1 ID : 00000B22
CMT PUB ID : 0FF00003B5757F56D59175740913287058C29487
CMT MODE ID : 00
CMT R_HASH : 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT ROM ID : 273F6D55DFAAF68F

CMT : Sending 2nd loader...
Use : RAP3Gv3_2nd.fg , Rev : 0.0 Ver : 10.42.0
CMT Loader sent, Boot Ok
MCU Configuration
FLASHID : 89820089 , CMT , NOR
CMT Flash ID : 89820089 < INTEL => 0046L0Y1GG/NU48F512
FLCNT : 00000000000000000000000000000000000000
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAP3Gv3_algo_v1331.fg , Rev : 0.0 Ver : 1.33.1
CMT Algo sent
CMT PAPUB : E6E2AB6C2D394BC82633D2B4965E7E519E2FB25E00
Transmission mode : Dual (Ddr, TX2)

Boot Done!

Init Service mode... Wait...

Connect phone on selected interface...

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Reading Phone Info....
Connected phone - Nokia 6303 classic
Software ver : V 10.10 18-11-09 RM-443 (c) Nokia
IMEI : 353**********
Ape Ver :
APE Var :
APE ADSP:
DSP Ver : ICPR81_09w37
APE Test:
PPM : V 10.10
18-11-09
RM-443
(c) Nokia
I
CNT : Content: i_ru_steel
V 10.10
18-11-09
RM-443
(c) Nokia

Product SN : DQH799296
Product code : 0568856
Base Prd.code: 0575069
Module code : 0204197
Long Prod.SN : 0
Hardware info=======
HWID : 1000
Retu : 15
Tahvo : 22
Batery: 4717 mV
Camera:
CMT BT: 410B-v170
APE BT:
APE HW:
LCDVer: SHARP
RF ic : 0831
Lock info ===========
IMEI : 353************
IMEI spNet :
IMEI svNet :

Conf key : 0000000000000000
Provider key : 2440700000000000
Provider : AT&T;U.S.A. (3650)
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 7

LOCK STATUS :
=============================
BLK : 1
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS : All Open
=============================
User code : Crypted
MMC pwd : no any record found
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery]

Done!
Все ОК. :)

DrManila

19.03.2011, 22:27

JayDi,
первый раз:

Will Write RPL keys now...
Check RPL file...
NPC Data found!
CCC Data found!
HWC Data found!
SimLock Data found!
SimLock key found!
SuperDongle Key found!
CMLA key found!
WMDRM key found!
No any FLASH keys selected, Skip FLASH part
Init Service mode... Wait...

Check phone mode...
Phone already in Test mode, skip change...

Writing SimLock Key... Error!
Writing SimLock Data... Error!
Writing Super Dongle Key... Error

SDD Key status : SDData Damaged!!!!! :(
SimLock status : SimLock Damaged!!!!! :(
Security status : Security is Ok

Done!

Второй раз:

Will Write RPL keys now...
Check RPL file...
NPC Data found!
CCC Data found!
HWC Data found!
SimLock Data found!
SimLock key found!
SuperDongle Key found!
CMLA key found!
WMDRM key found!
No any FLASH keys selected, Skip FLASH part
Check phone mode...
Phone in Charging mode
Seting Test mode... wait...
Test mode set

Writing SimLock Key... Ok!
Writing SimLock Data... Ok!
Writing Super Dongle Key... Ok

SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!! :(

Done!

Taliik

19.03.2011, 22:32

как можно загрузить на сервер телефон для разлока а то уже неделю не могу загрузить все нет свободны слотов?

PANsoft

19.03.2011, 23:19

как можно загрузить на сервер телефон для разлока а то уже неделю не могу загрузить все нет свободны слотов?

Так и грузим... пытаемся время от времени... Проще конечно в ночное время...

JayDi

20.03.2011, 07:02

DrManila, сорри, сначала подумал, что Вы о USB режиме.
Спасибо за логи, проблема, видимо в сменен режима, через UFS - телефон не корректно подхватился. попробуем улучшить этот момент.

alexi

22.03.2011, 03:38

6303ci RM-638 версия 1.18beta, из папки с 1.17.1:
чтение RD Key через UFS, кабель с сдвоенным MBUS:
Сразу предупреждаю: если программа ругается на невозможность открытия файла "Cboot_R2" - переименуйте файл, в нем первая буква C - "С" русская. (лежит в Flash/UFS/Special)

У меня тоже прочитался через УФС. Но после того как прошло 100 % процентов безуспешного брутфорса выяснилось что ключ неправильный.

Layder

22.03.2011, 07:57

alexi, у самого вчера закончило считать LBF, тоже не нашло код. Сегодня утром списался с разработчиками, они проблему подтвердили.
На 6303ci данные для расчета читаются неверно.

JayDi

22.03.2011, 13:46

скорее всего на всех rap4, с rapuyama проблем нет.
Тушки достал, проверим и исправим.

KonstantinVoskr

23.03.2011, 19:51

Кто нибудь пробовал понижать X3-02 с помощью BEST-а?
А то есть такой аппарат, пришедший трупом, после манипуляций с HW аппарата и потом дальнейшей проливкой ПО- аппарат завелся- но моргаликом( было прошита версия 5.60), мною было принято решение повысить еще версию аппарата до 05.68 с целью узнать, не дефектна ли микросхема FLASH( или что то по железу еще, дабы исключит SF часть). Данная манипуляция привела к полноценной работоспособности аппарата.
Было принято решение сделать бекап сертификатов с помощью Cyclone-box, но к сож-ю, заявленная функция бекапа полноценного RPL ( включая SD) не увенчалась успехом- все было забекаплено кроме SD.

Вот и теперь главный вопрос- возможно ли с помощью BEST безопасно откатится на версию 05.60?

JayDi

24.03.2011, 08:27

KonstantinVoskr, конечная цель - русский? Шьем только PPM - должно сработать.
Понижать бесполезно, только через полное стирание.

KonstantinVoskr

24.03.2011, 12:07

В общем пролил с помощью BEST ppm_i 05.60 -все работает нормально, аппарат с русским и не отрубается . Сертификаты все целы. Цель достигнута.
card found: S/N *********
registered to: KonstantinVoskr

Connect phone on selected interface...

Core version : 1.18 , Rev : 3.0

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

-> Flash Files are NOT selected!
You can Select:
S40 : Any, but MCU need present in filelist
S60 : Any, but CORE/MCU need present in filelist
S60 APE : MCU+PPM, MCU+PPM+CNT

Core version : 1.18 , Rev : 3.0

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
PPM : rm639__05.60.ppm_i
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000030000022600010007600C192102031104
EM0 ID: 00001051
EM1 ID: 00001060
PUBLIC ID: 11300110EC8E0344717A815F55F5DA654FAB92B5
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 11.4.0
Processing RAWLOADER...
FLIC : 003000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 11.4.0
Boot Done! :)
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
ADL: phone is in flash mode
===Flashing [PPM]===
Erase : Processing rm639__05.60.ppm_i
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm639__05.60.ppm_i
Total writen 60 blocks
TIME : Write time : 00:00:01
PPM Write done
ADL: Request programm status
NAND status : 00000002 / 00000002 / 00000000

ADL: Close_Session
Content: 000300000000020000000200000000
ADL: Reboot

Flashing done!
Total flash time : 00:00:01
Reboot phone now...

Afterflash not selected, skip
Done!

Elapsed: 00:00:14
Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Reading Phone Info....
Connected phone - Nokia X3-02
Software ver : V 05.68 10-12-10 RM-639 (c) Nokia
IMEI : 355380043676961
Ape Ver :
APE Var :
APE ADSP:
DSP Ver : 92_MP2.2_5.67
APE Test:
PPM : V 05.60 06-10-10 RM-639 (c) Nokia I
CNT : Content: ctv DE V 05.68 10-12-10 RM-639 (c) Nokia
Product SN : C9D327648
Product code : 059D6L2
Base Prd.code: 0593642
Module code : 0204600
Long Prod.SN : 0
Hardware info=======
HWID : 1001
Retu : 51
Tahvo : 00
Batery: 3918 mV
Camera:
CMT BT: 4217-v529
APE BT:
APE HW:
LCDVer: TPO
RF ic :
Lock info ===========
IMEI : *****************
IMEI spNet : *****************
IMEI svNet : *****************

Conf key : 0000000000000000
Provider key : 2440700000000000
Provider : AT&T;U.S.A. (3650)
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 7

LOCK STATUS :
=============================
BLK : 1
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS : All Open
=============================
CRT308 Backup Created... :)

User Code : 12345
MMC pwd : no any record found
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery]

Done!

Phone disconected!

Connect phone on selected interface...

Скорость, с которой все это в ТА влетает просто поражает...

Mantikor

24.03.2011, 16:15

Протестировано флеширование dead-usb:
C6-01 RM-718
C3-01 RM-640
C5-03 RM-697
Все аппараты без проблем, прикладываю отчитаные полные PM, возможно кому-то пригодятся.

Layder

26.03.2011, 00:44

Версия 1.18.5 и 1.18 бета не бутят нормально nokia 1800:
причем это я узнал уже после того, как появился свободный слот... ненадолго.
v 1.17.1, запущенная сразу же, но слот забрали... :)

p.s. 3-й лог. 1.18.5 ничего не вычитала.

Server have 1 free slot(s)

Connecting to server...

Server have 1 free slot(s)
Upload Job procedure started...

Phone Imei: 354857046551821
Checking locks...
Infineon XGOLD phone found...
Sl Conf : 262-02-00000000000
Sl Prof : 800000000003000-2
Sl Aux : 000B0000
Hw Sig : 062F53803654A08E
Provider : Vodafone D2 (DCT3 3210);Germany

Lock info:
Block 1
L1:Close;
Block 2
L1:Close;
Block 3
L1:Close;
Block 4
L1:Close;
Block 5
L1:Close;
Block 6
L1:Close;

Booting phone now....
Sync Ok , A2
CPU ID : XGOLD , A200341100
Boot Ok , 01
Error booting phone...

Upload Job fail...!

Phone disconected!

Phone found!
Series 40 Device detected!
read info... - Ok

Upload Job procedure started...

Phone Imei: 354857046551821
Checking locks...
Infineon XGOLD phone found...
Sl Conf : 262-02-00000000000
Sl Prof : 800000000003000-2
Sl Aux : 000B0000
Hw Sig : 062F53803654A08E
Provider : Vodafone D2 (DCT3 3210);Germany

Lock info:
Block 1
L1:Close;
Block 2
L1:Close;
Block 3
L1:Close;
Block 4
L1:Close;
Block 5
L1:Close;
Block 6
L1:Close;

Booting phone now....
Sync Ok , A2
CPU ID : XGOLD , A200341100
Boot Ok , 01
PBL : SE0_091125 F11
Algo Ok , 01
SBL mode Ok
SBL : Default_RAM_Bootloader
Trying dump eeprom....
Connecting to server...
Error 6
Server version:
Error in hash string
Credit left:
Upload Job fail...!

Phone disconected!

Server have 1 free slot(s)
Upload Job procedure started...

Phone Imei: 354857046551821
Checking locks...
Infineon XGOLD phone found...
Sl Conf : 262-02-00000000000
Sl Prof : 800000000003000-2
Sl Aux : 000B0000
Hw Sig : 062F53803654A08E
Provider : Vodafone D2 (DCT3 3210);Germany

Lock info:
Block 1
L1:Close;
Block 2
L1:Close;
Block 3
L1:Close;
Block 4
L1:Close;
Block 5
L1:Close;
Block 6
L1:Close;

Booting phone now....
Sync Ok , A2
CPU ID : XGOLD , A200341100
Boot Ok , 01
PBL : SE0_091125 F11
Algo Ok , 01
SBL mode Ok
SBL : Default_RAM_Bootloader
Trying dump eeprom....
Connecting to server...
Error 6
Server version:
Error in hash string
Credit left:
Upload Job fail...!

McAlister

26.03.2011, 01:33

Владимир, у меня нормально бутится 1800 RM-653 BEST'ом ver.1.18.5. Только что специально проверил

Phone found!
Series 40 Device detected!
read info... - Ok

Read and Check phone data...
Infineon checking...

SIMLOCK TEST : Ok
RUN TEST : Ok

Booting phone now....
Sync Ok , A2
CPU ID : XGOLD , A200341100
Boot Ok , 01
PBL : SE0_091125 F11
Algo Ok , 01
SBL mode Ok
SBL : Default_RAM_Bootloader
EPP CFG [Bering]...
FLASH ID : 0020000000C08800
FLASH ID : ST, M58WR064
Boot Done!

Done!

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Reading Phone Info....
SW ver : V 04.10 24-04-10 RM-653 (c) Nokia
IMEI : 35485704xxxxxxxx
PPM : V 04.10
24-04-10
RM-653
(c) Nokia
AD
PCode : 059B6X4
BPCode : 0595254
HWID : 1000
LCDVer : WIN:BOHAIv94
NT39121
IMEI : 35485704xxxxxxx
Sl Conf : 262-02-00000000000
Sl Prof : 800000000003000-2
Sl Aux : 000B0000
Hw Sig : 6EE1D8B6162E95F2
Provider : Vodafone D2 (DCT3 3210);Germany

Lock info:
Block 1
L1:Close;
Block 2
L1:Close;
Block 3
L1:Close;
Block 4
L1:Close;
Block 5
L1:Close;
Block 6
L1:Close;

Done!

Layder

26.03.2011, 03:43

да бутит - то бутит. только батник для LBF не получился. 2 раза... а свободных слотов опять нет.

PANsoft

26.03.2011, 16:51

да бутит - то бутит. только батник для LBF не получился. 2 раза... а свободных слотов опять нет.

а зачем свободные слоты для батника?

bmw

26.03.2011, 16:59

а зачем свободные слоты для батника?Думаю, имелось ввиду, что на момент чтения данных из 1800 был свободный слот на сервере, а сейчас его опять нет. А так как считать быстро не получилось, то и слот забрали.

PANsoft

26.03.2011, 17:09

Думаю, имелось ввиду, что на момент чтения данных из 1800 был свободный слот на сервере, а сейчас его опять нет. А так как считать быстро не получилось, то и слот забрали.

Лог читается и без свободных слотов.

bmw

26.03.2011, 17:17

Лог читается и без свободных слотов.Да это понятно. Пока был слот не получилось считать версиями 1.18.5 и 1.18 бета, а когда откатился до 1.17.1 и считал, то слот пропал, вот что имелось ввиду, как я понял :) Речь о том, что новые версии не вычитывают ключ из 1800, а 1.17.1 считала.

Layder

26.03.2011, 19:00

Лог читается и без свободных слотов.
Простите, как? А это что?

Connect phone on selected interface...
Phone found!
Series 40 Device detected!
read info... - Ok

Connecting to server...
no free slot(s) available
Error in job...

Connecting to server...
no free slot(s) available
Error in job...

Connecting to server...
no free slot(s) available
Error in job...

Connecting to server...
no free slot(s) available
Error in job...

Connecting to server...
Server have 1 free slot(s)
Upload Job procedure started...
Phone Imei: 354857046551821
Checking locks...
Infineon XGOLD phone found...
Sl Conf : 262-02-00000000000
Sl Prof : 800000000003000-2
Sl Aux : 000B0000
Hw Sig : 062F53803654A08E
Provider : Vodafone D2 (DCT3 3210);Germany
Lock info:
Block 1
L1:Close;
Block 2
L1:Close;
Block 3
L1:Close;
Block 4
L1:Close;
Block 5
L1:Close;
Block 6
L1:Close;
Booting phone now....
Sync Ok , A2
CPU ID : XGOLD , A200341100
Boot Ok , 01
PBL : SE0_091125 F11
Algo Ok , 01
SBL mode Ok
SBL : Default_RAM_Bootloader
Trying dump eeprom....
Connecting to server...
Error 6
Server version:
Error in hash string
Credit left:
Upload Job fail...!
Phone disconected!
Connect phone on selected interface...

Connecting to server...
Server have 1 free slot(s)
Upload Job procedure started...

Phone Imei: 354857046551821
Checking locks...
Infineon XGOLD phone found...
Sl Conf : 262-02-00000000000
Sl Prof : 800000000003000-2
Sl Aux : 000B0000
Hw Sig : 062F53803654A08E
Provider : Vodafone D2 (DCT3 3210);Germany
Lock info:
Block 1
L1:Close;
Block 2
L1:Close;
Block 3
L1:Close;
Block 4
L1:Close;
Block 5
L1:Close;
Block 6
L1:Close;
Booting phone now....
Sync Ok , A2
CPU ID : XGOLD , A200341100
Boot Ok , 01
PBL : SE0_091125 F11
Algo Ok , 01
SBL mode Ok
SBL : Default_RAM_Bootloader
Trying dump eeprom....
Connecting to server...
Error 6
Server version:
Error in hash string
Credit left:
Upload Job fail...!
Phone disconected!

Connecting to server...
no free slot(s) available
Error in job...

Connecting to server...
no free slot(s) available
Error in job...

Connecting to server...
no free slot(s) available
Error in job...

Connecting to server...
no free slot(s) available
Error in job...

Connecting to server...
no free slot(s) available
Error in job...

со вчерашнего вечера не могу найти дырку, чтобы сделать батник....

Nics

26.03.2011, 19:45

Phone found!
Series 40 Device detected!
read info... - Ok

Connecting to server...

no free slot(s) available
Error in job...

Connecting to server...

no free slot(s) available
Error in job...

то же самое.. первая попытка - с галrой LBF, вторая - без.
версия 1.18.5

Layder

27.03.2011, 11:21

Ни одной из версий 1.15 - 1.18.5 не получается загрузить для расчета кода 1800:

Upload Job procedure started...

Phone Imei: 354857046551821
Checking locks...
Infineon XGOLD phone found...
Sl Conf : 262-02-00000000000
Sl Prof : 800000000003000-2
Sl Aux : 000B0000
Hw Sig : 062F53803654A08E
Provider : Vodafone D2 (DCT3 3210);Germany

Lock info:
Block 1
L1:Close;
Block 2
L1:Close;
Block 3
L1:Close;
Block 4
L1:Close;
Block 5
L1:Close;
Block 6
L1:Close;

Booting phone now....
Sync Ok , A2
CPU ID : XGOLD , A200341100
Boot Ok , 01
PBL : SE0_091125 F11
Algo Ok , 01
SBL mode Ok
SBL : Default_RAM_Bootloader
Trying dump eeprom....
Connecting to server...
Error 6
Server version:
Error in hash string
Credit left:
Upload Job fail...!

Phone disconected

p.s. Объясните пожалуйста, мне перед клиентом как бы некрасиво получается..... 3-й день неизвестности. плюс еще расчет....

PANsoft

27.03.2011, 12:28

Простите, как? А это что?
со вчерашнего вечера не могу найти дырку, чтобы сделать батник....

А это - скачать 1.18.5 с сапорта. Еще раз говорю, свободных слотов для LBF не требуется.

Connecting to server...
Error 6

А это у вас кредитов маловать... Либо отсутствут такой юзер в базе сервера.

Layder

27.03.2011, 15:35

я и пользуюсь версией 1.18.5
раньше было 20 кредитов, начисленных бесплатно, мне их надо купить?
эти логи версии 1.18.5, которая прежде чем что-либо делать, сначала лезет на сервер, проверяет если там слоты, и говорит: дайте слот.
и мои последние 3-4 сообщения как раз об этом. мне надо видео с экрана записать?

DrManila

27.03.2011, 15:38

Layder,
Должен довести до сведения наших пользователей следующее:

Для создания файла LBF на сегодняшний день нужно иметь только 1 кредит на аккаунте. В связи с этим автоматически были списаны 19 кредитов выданые вам бесплатно для этих целей.
http://www.mcrf.ru/forum/showpost.php?p=226127&postcount=35
Кредитов нет поэтому.

JayDi

27.03.2011, 15:54

Версия 1.18.5 - перекачайте с саппорта. В ней исправлена проблема LBF.
Через час после релиза это было сделано. И даже дет напоминали об этом.

Layder

27.03.2011, 16:07

Версия 1.18.5 - перекачайте с саппорта. В ней исправлена проблема LBF.
Через час после релиза это было сделано. И даже дет напоминали об этом.
неплохо бы тогда менять номер версии, чтобы было меньше таких недоразумений

PANsoft

27.03.2011, 21:50

неплохо бы тогда менять номер версии, чтобы было меньше таких недоразумений

За это тоже минус влепить? Я помоему ясно ответил на вопрос, и об этом писалось...

Layder

27.03.2011, 23:00

За это тоже минус влепить? Я помоему ясно ответил на вопрос, и об этом писалось...
1) ну репутацию он все равно Вам не испортит.
2) если бы у вас не было 2-х версий 1.18.5, то и вопроса бы не возникло.
когда я вижу, что у меня версия лезет на сервак и не делает батник, а мне говорят, что такого быть не может, я начинаю чувствовать себя дураком, и не могу понять, что я делаю не так.
3) про сторку с Error Hash Вы также не ответили, а мне ответил JayDi в асе, что это просто пока еще неподдерживаемый новый Hash. Все же беспокоить людей в асе по сложившимся у меня вопросам я стараюсь в последнюю очередь.
4) наличие аккаунта и кредитов на нем кнопкой проверить не сложно, и естественно я это делал.

исходя из перечисленного, и кол-ва глупых вопросов самому себе, что я делаю не так, а так же что Вы не ответили на вопрос, я посчитал Ваше сообщение, как суппортера продукта, бессмысленным и поставил минус.

PANsoft

28.03.2011, 11:50

Что значит неподдерживаемый новых хеш в инфинеоне? Нет там такого.

Layder

28.03.2011, 13:17

Что значит неподдерживаемый новых хеш в инфинеоне? Нет там такого.

С Ваших слов, получается, что то, что у меня прога лезла на сервак и не генерировался батник для расчета кода - это инопланентые вмешательства?
Вы мне ничем не помогли в 3-4 сообщениях, а JayDi и про версию расписал (что у вас 2 версии с одним номером есть оказывается), и про то, что надо подождать новый версий, в которых будет поддержка этих моделей.

Мы здесь пустым трепом занимаемся, вместо того, чтобы одним сообщением закрыть возникшие вопросы.

PANsoft

28.03.2011, 14:33

Я повторю еще раз. Нет неподдерживаемых хеш для инфинеона, там нет такого понятия. У вас произошел сбой при обмене с сервером. Попробуйте еще раз.

Layder

28.03.2011, 14:43

PANsoft, я пробовал много раз.... и всегда одно и тоже.
я теперь кусок переписки из аси:
========
27.03.2011 16:16:51 Layder пишет:
слушай, а что у меня с это 1800
27.03.2011 16:18:31 Dzirt пишет:
либо тушка с новым типом хэша, либо что-то с серваком, хотя, если другие тела норм - то скорее всего тушка с новым типом
27.03.2011 16:18:49 Dzirt пишет:
Андрей вроде получил пару таких. Добавляет.
27.03.2011 16:18:53 Dzirt пишет:
Версию перекачивали?
27.03.2011 16:19:05 Layder пишет:
да
27.03.2011 16:19:11 Dzirt пишет:
на серваке лежит инсталлер, через часа два после оффа ложили
27.03.2011 16:19:16 Layder пишет:
теперь сразу читает тело, а не ломится на сервак
27.03.2011 16:19:32 Dzirt пишет:
значит новый тип
27.03.2011 16:19:47 Dzirt пишет:
на днях апдейт, исправим/добавим
27.03.2011 16:20:14 Dzirt пишет:
или добавим просто чтение куска Рмм и все
=======

расскажите мне, пожалуйста... Вы сначала утверждали, что версия 1.18.5 не ломится на сервак, а оказалось ломится, если версия "неправильная". теперь утверждается, об ошибке обмена с серваком...
я пару часов сидел с версией, которая ломилась на сервак, для того, чтобы найти слот. потом еще некоторое время чтобы найти еще один. потом в воскресение я нашел 2 свободных слота и понял, что ошибка:
===
Connecting to server...
Error 6
Server version:
Error in hash string
===
постоянна.
А теперь мне нужно много раз пробовать повторять "Upload Job" пытаясь создать батник?...

Мне хочется спросить: или Вы не в курсе, того, что делается у вас в команде или просто издеваетесь?

PANsoft

28.03.2011, 14:47

Читать нужно то, что пишем мы... Мог меня спросить в аське, я бы давно ответил. А не разводить срач...

turbo

03.04.2011, 19:44

Подскажите, как понизить версию в 6600f(RM-325)? Проблема в том, что клиент обновил с версии 6.18 до 6.20, после этого возникла проблема с кнопкой 6 (зависает,перезагружается). При попытке downgrade BEST пишет:
-> Failed to prepare > protected data > break!
-> Downgrade not possible for that phone... :(
Но это вроде SL2? Как быть?

DrManila

03.04.2011, 20:09

turbo, дело не в SL2 или SL3, а в том, что защищено 308-е. Если это телефон SL2, то думаю как его понижать и так понятно.

JayDi

03.04.2011, 20:35

ufs -
Read pm
Read rpl
erase flash
flash
restore rpl
repair ( if need ) sd/sld
sx4
upload tune

Alva

03.04.2011, 20:55

проблема с кнопкой 6
железячная это проблема, никак не софтовая

turbo

03.04.2011, 21:02

железячная это проблема, никак не софтоваяКлиент утверждает, что проявилась после обновления...

JayDi

03.04.2011, 21:25

Да, нокия вроде как подтвердила этот баг, но исправлять не спешит. Если память не изменяет, тел зависает при нажатии 6ки.

P.S. Необходим тестер с C7/N8 на проверку прошивки контента в нихх ( eMMC)
У кого будет пяток новых - x2, x2-01, c3, 6700, X3-2, C3-01 и подобные свежие S40 - на премет нового движка чтения телефонной проверить нужно.

Alva

03.04.2011, 21:40

Да, нокия вроде как подтвердила этот баг, но исправлять не спешит. Если память не изменяет, тел зависает при нажатии 6ки.
Так а Nokia признала это как аппаратную проблему или же софтовую?

JayDi

03.04.2011, 21:48

Вроде как софтовую, хотя, поднимал для эксперимента подобный, проблем не замечал, так что трабла не во всех телефонах. Причины понять точной - возможности не было.

turbo

03.04.2011, 22:12

Вроде как Нокиа рекомендовала либо прошивать, либо менять шлейф - но не одновременно, т.е. если помогла замена шлейфа, то прошивать не нужно, и наоборот.

mixanik

10.04.2011, 23:39

телефон 5230, в телефоне отсутствует D3300(КЗ по питанию),телефон полностью рабочий за исключением USB. Телефон подключен через JAF
лог Rd key JAF S/N ODJAF000 boot - Ok

Connect phone on selected interface...

Ready for operations...

Read Uniq key data started...

Checking BUS...
Switch jaf to FlashMode...
FlashMode set Ok
Booting phone...

BOOT 1ST : C0

CMT part info :
CMT ASICID : 000000010000022600010006400C192101051103
CMT EM0 ID : 00000296
CMT EM1 ID : 00000B22
CMT PUB ID : 06A00004279D005271A6A8799B8F5D36E6EABCC9
CMT MODE ID : 00
CMT R_HASH : 479C6DDE3942E12C429C1D6ADED80371
CMT ROM ID : 4B9B75103E691FF8

Error finding required loader... :(

Ready for operations...

Error fetching data... :(

Read fail...!

чтение RPL Ready for operations...

Backup Certificates now...
Checking BUS...
Switch jaf to FlashMode...
FlashMode set Ok
Booting phone...

BOOT 1ST : C0

CMT part info :
CMT ASICID : 000000010000022600010006400C192101051103
CMT EM0 ID : 00000296
CMT EM1 ID : 00000B22
CMT PUB ID : 06A00004279D005271A6A8799B8F5D36E6EABCC9
CMT MODE ID : 00
CMT R_HASH : 479C6DDE3942E12C429C1D6ADED80371
CMT ROM ID : 4B9B75103E691FF8

Change Protocol : NEW

Using NEW Flashing Protocol

CMT : Sending 2nd loader...
Use : RAPIDOv11_2nd.fg
CMT Loader sent, Boot Ok
Trans Req : 32 bit, DualLine, Set : 32 bit, DualLine
CMT Flash ID : 004000EC < SAMSUNG [SEC] => KAT00F00RA [NAND]
FLIC : 004000EC , NAND , CMT

Sending Algo...
Use RAPIDOv11_XSR17_alg.fg
Finalize done, Algo sent!
Trans Req : 32 bit, DualLine, Set : 32 bit, DualLine
PapubKeysReq : 7DC72D3FDC552426A4479BC820097D304CFB6C15A8
Boot done!

CMT : Read NPC certificate...
IMEI : 353791046331978
CMT : Read CCC certificate...
CMT : Read HWC certificate...
Cert Read done!

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : c:\InfinityBox\BEST\Backup\Cert\353791046331978_CR T.rpl

Get PA_Ver Checking SL version now...
Checking BUS...
Switch jaf to FlashMode...
FlashMode set Ok
Booting phone...

BOOT 1ST : C0

CMT part info :
CMT ASICID : 000000010000022600010006400C192101051103
CMT EM0 ID : 00000296
CMT EM1 ID : 00000B22
CMT PUB ID : 06A00004279D005271A6A8799B8F5D36E6EABCC9
CMT MODE ID : 00
CMT R_HASH : 479C6DDE3942E12C429C1D6ADED80371
CMT ROM ID : 4B9B75103E691FF8

Change Protocol : NEW

Using NEW Flashing Protocol

CMT : Sending 2nd loader...
Use : RAPIDOv11_2nd.fg
CMT Loader sent, Boot Ok
Trans Req : 32 bit, DualLine, Set : 32 bit, DualLine
CMT Flash ID : 004000EC < SAMSUNG [SEC] => KAT00F00RA [NAND]
FLIC : 004000EC , NAND , CMT

Sending Algo...
Use RAPIDOv11_XSR17_alg.fg
Finalize done, Algo sent!
Trans Req : 32 bit, DualLine, Set : 32 bit, DualLine
PapubKeysReq : 7DC72D3FDC552426A4479BC820097D304CFB6C15A8
Boot done!

CMT : Read PASUBTOC certificate...

PA_INFO :
DETECTED SL : PA_SL3

Done

Check Read and Check phone data...
Checking BUS...
Switch jaf to FlashMode...
FlashMode set Ok
Booting phone...

BOOT 1ST : C0

CMT part info :
CMT ASICID : 000000010000022600010006400C192101051103
CMT EM0 ID : 00000296
CMT EM1 ID : 00000B22
CMT PUB ID : 06A00004279D005271A6A8799B8F5D36E6EABCC9
CMT MODE ID : 00
CMT R_HASH : 479C6DDE3942E12C429C1D6ADED80371
CMT ROM ID : 4B9B75103E691FF8

Change Protocol : NEW

Using NEW Flashing Protocol

CMT : Sending 2nd loader...
Use : RAPIDOv11_2nd.fg
CMT Loader sent, Boot Ok
Trans Req : 32 bit, DualLine, Set : 32 bit, DualLine
CMT Flash ID : 004000EC < SAMSUNG [SEC] => KAT00F00RA [NAND]
FLIC : 004000EC , NAND , CMT

Sending Algo...
Use RAPIDOv11_XSR17_alg.fg
Finalize done, Algo sent!
Trans Req : 32 bit, DualLine, Set : 32 bit, DualLine
PapubKeysReq : 7DC72D3FDC552426A4479BC820097D304CFB6C15A8
Boot done!

Switch jaf to FBUS...
FbusMode set Ok

Phone connected
IMEI : 353791046331978
Simlock status : Simlock is Ok
Security status : Security is Ok

Ready for operations...

hank6

11.04.2011, 10:28

последняя бета врод повеселее работает под 7ос...вчера пытался ею организовать батник для lbf....оч захотелось 1616:) разлочить...и все никак...ломицца на сервер, файл не создает...даж накинул xp на вторую машину...думал лыжи не едут...те же ...только вид сбоку:wow:...оч был разочарован...устал я с ней бороцца...это как жигули сравнить с ауди....обнять и плакать...
вот сегодня прочел посты и понял что не я один такой...:kos:
не хочу показаться нескромным, но кривая пограммулина совсем...:(...по верхам она...
можно говорить все что угодно, но реальность такова...

JayDi

11.04.2011, 10:35

если не читает только 1616 - то вся программулина кривая? так выкиньте донгл нах.
циклон вон держит - им хоть зачитайтесь.

hank6

11.04.2011, 10:45

JayDi, не в обиду сказано...
но зачем добавлять что то новое не поправив старое...?
вступать в полемику не думаю что есть смысл...каждый сам сделает свой вывод о функциональности и стабильности программы...но со своей стороны считаю возможным сказать то что сказал...

DrManila

11.04.2011, 10:48

кривая пограммулина совсем
BEST отличный софт за свои деньги, да есть недочеты, но нет ПО без них. А большой плюс, то что есть возможность вести диалог с разработчиком, который прислушается к мнению и софт будет удобнее, а не просто постить багрепорты, на которые всем "накласть". IMHO.

Layder

11.04.2011, 10:50

hank6, с тем, что не логгятся инфенионы ребята разобраться пока не могут. телефон, который у человека не читался дома был отправлен Андрею, и у него нормально прочитался.
т.е. затык похоже связан с каким-то глюком отправки данных на сервер.

p.s. С проблемой разобрались. Андрей отпишет, как поправит.

hank6

11.04.2011, 11:28

Layder, Вова, я устал бороться...постоянные ошибки, подвисоны, дисконнекты, откаты, накаты, окно статик....все какое то полу....ощущение неприятное...толи я дебил, толи лыжи не едуць...и постоянное чувство, что все юзеры-бетатестеры...и должны саппортерам...

телефон, который у человека не читался дома был отправлен Андрею, и у него нормально прочитался.
т.е. затык похоже связан с каким-то глюком отправки данных на сервер.
Вов...у Андрея что сервер какой то спец...?

Layder

11.04.2011, 11:59

hank6, хочу предложить перестать всем бузеть. Заметьте, что, даже мои сообщения по теме, что свою 1800 я не закконектил, не влияют на мое отношение к людям, кто делает данный продукт.

Есть случай, есть конкретная ситуация. Есть проблема, есть решение. Все можно решить. В конце концов у людей, кто пишет софт, хватает объема работ, и есть приоритеты, что важнее, а что нет.

И при желании можно понять, что у разработчиков нету времени долбаться с теми-же инфенионами, с которых им никакой прибыли, в то время, когда наверняка есть более важные задачи, о которых мы не знаем, и стоит другая работа.

Мало знать. Важно понимать. Понимание выше знания. Помните это.

hank6

11.04.2011, 12:11

это мое имхо...не более...оно таково, и основано на реальных фактах...
а понимание:) это хорошо...и если софт кривой, не могу говорить что он супер...

Layder

11.04.2011, 12:17

hank6, вот, собственно, полчаса назад с Андреем лог делали, я думаю причина очевидна:

Connecting to server...

user: 12016683.03
credit: 1
jobs in progress: 0
jobs done: 0

Phone found!
Series 40 Device detected!
read info... - Ok

Upload Job procedure started...

Phone Imei: 354857046551821
Checking locks...
Infineon XGOLD phone found...
Sl Conf : 262-02-00000000000
Sl Prof : 800000000003000-2
Sl Aux : 000B0000
Hw Sig : 062F53803654A08E
Provider : Vodafone D2 (DCT3 3210);Germany

Lock info:
Block 1
L1:Close;
Block 2
L1:Close;
Block 3
L1:Close;
Block 4
L1:Close;
Block 5
L1:Close;
Block 6
L1:Close;

Booting phone now....
Sync Ok , A2
CPU ID : XGOLD , A200341100
Boot Ok , 01
PBL : SE0_091125 F11
Algo Ok , 01
SBL mode Ok
SBL : Default_RAM_Bootloader
Trying dump eeprom....
Connecting to server...
Error 6
Server version:
Error in hash string
Credit left:
Upload Job fail...!

Phone disconected!

Upload Job procedure started...

Phone Imei: 354857046551821
Checking locks...
Infineon XGOLD phone found...
Sl Conf : 262-02-00000000000
Sl Prof : 800000000003000-2
Sl Aux : 000B0000
Hw Sig : 062F53803654A08E
Provider : Vodafone D2 (DCT3 3210);Germany

Lock info:
Block 1
L1:Close;
Block 2
L1:Close;
Block 3
L1:Close;
Block 4
L1:Close;
Block 5
L1:Close;
Block 6
L1:Close;

Booting phone now....
Sync Ok , A2
CPU ID : XGOLD , A200341100
Boot Ok , 01
PBL : SE0_091125 F11
Algo Ok , 01
SBL mode Ok
SBL : Default_RAM_Bootloader
Trying dump eeprom....
Connecting to server...
Server version: 0.2.700
Request Submited
Credit left: 101
Create Log file for local calculation...
File D:\GSM\Nokia\Best\Local_calc\354857046551821.bcl created - Ok
Done!

Phone disconected!

p.s. свою позицию я отписал сообщением выше. У меня есть один хороший знакомый. И у него есть хорошая поговорка "Хочешь сделать лучше - сделай вместо"

AVL

11.04.2011, 12:36

Парни, предложение:
М.б. по проблемам коннекта и работе с сервером, стоит создать отдельную тему? Разнести вопросы флеширования, работы с контентом и вопросы по восстановлению, разблокировки по разным темам?
Продукт ориентирован не только на разлок.. и искать в теме, особенности работы, с этим не связанные(отвязкой от оператора), становится все труднее :)
Огромная часть юзеров с этим вообще не сталкивается (два-три тел в год), те кто далеко от границ..

Пожелание: Пробуем все же придерживать эмоции и "травмирующие" самолюбие выражения.. Я , отлично понимаю. что в этих дебатах рождается истина, но все же, давайте будем аккуратнее.. ?
зы: Мне, как и многим др. пользователям, ИМХО.. BEST - удобный инструмент для флеширования, работы с контентом.. Я бы сказал, очень удобный... я, даже гарантийные тел, в последнее время флеширую BEST-ом, гораздо удобнее и быстрее получается..

bmw

11.04.2011, 12:53

Layder
У меня такая же 1616 лежит, ждёт решения:
Booting phone now....
Sync Ok , A2
CPU ID : XGOLD , A200341100
Boot Ok , 01
PBL : SE0_091125 F11
Algo Ok , 01
SBL mode Ok
SBL : Default_RAM_Bootloader
Trying dump eeprom....
Connecting to server...
Error 6
Server version:
Error in hash string
Credit left:
Upload Job fail...!
А как удалось считать .bcl? Я думал, уже что-то поправили, вот попробовал - те же пироги... И почему во втором логе показывает версию сервера 0.2.700, а в первом нет, ошибка 6 сразу после обращения к серверу. Или это просто лог так показывает не совсем понятно?

hank6

11.04.2011, 12:58

bmw, Андрюх...те же яйца:) только что перекачал две инсталляции с саппорта...и на обоих лог один в один как у тя...
видимо софт не для всех:) одинаковый...как это еще понимать...как считать-бьюсь уже второй день...сотня попыток-результата ноль...

Layder

11.04.2011, 14:25

горячие парни не увидели разницы между 2 логами. разводить треп - норма, а смотреть логи - нет.
сервер просто считает, что не хватает кредитов для создания батника...

p.s. как исправят ситуацию, Вам сообщат.

bmw

11.04.2011, 14:51

горячие парни не увидели разницы между 2 логами. разводить треп - норма, а смотреть логи - нет.Ну я абсолютно спокоен и не горячусь, и написАл сообщение не для потрепаться. Пару дней назад об этом разговаривал с авторами продукта, сказали подождать несколько дней, и всё будет поправлено. Просто увидел второй лог и подумал, что уже поправили.
И разницу в логах видел ещё до написания своего поста, мысль про нехватку логов тоже в голову приходила.

PANsoft

11.04.2011, 17:24

bmw, то, что я просил подождать пару дней - думал траблы в софте и ждал приезда тела с такой ошибкой. Тело приехало и ошибок ненашлось... Сегодня с Layder, вот понял где грабли, они на стороне сервера. Вечером исправлю.

PANsoft

11.04.2011, 21:35

По идее поправил, пробуем.

bmw

12.04.2011, 10:00

Уря, заработало! :)
Booting phone now....
Sync Ok , A2
CPU ID : XGOLD , A200341100
Boot Ok , 01
PBL : SE0_091125 F11
Algo Ok , 01
SBL mode Ok
SBL : Default_RAM_Bootloader
Trying dump eeprom....
Connecting to server...
Server version: 0.2.700
Request Submited
Credit left: 1
Create Log file for local calculation...
File c:\InfinityBox\BEST\Local_calc\3548260409xxxxx.bcl created - Ok
Done!

komayo

12.04.2011, 13:06

:appl: Респект BEST-у только что восстановил сертификат через УСБ полет нормальный

card found: S/N *******
registered to: komyor

Connect phone on selected interface...

Core version : 1.18 , Rev : 3.0

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm443__10.12.mcusw
PPM : rm443__10.12.ppm_cib
CNT : rm443__10.12.image_cib_mn_tj_illuvial
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Getting product info...
Dead Mode is Selected
Waiting for USB device...
--- Press phone's power button or insert cable & charger! ---
Connection opened successfully
Waiting for communication response.
[BB5 FLASH]: Bootrom Ok!
RAP_PUB: 0D800014FB157E5694212EBC3CA1441ED8AD5404
CMT_ROOT: 9DDBFCFE6E73CED7D8C6268C8EB85723
PatchRAWLoader: Patched OK
Processing RAWLOADER...
Processing UPDAPP...
Processing PASUBTOC...
TIME : Boot time : 00:00:08
Reopening the connection...
Waiting for response: 30
ADL -> [2nd] changing...
ADL Server confirm flashmode!
ADL : Check data
ADL : Data accepted
ADL : ASIC CMT select Ok
===Flashing [MCU]===
Erase : Processing rm443__10.12.mcusw
Found 8 areas to erase
Erasing area 0x00000000 - 0x0001FFFF, NOR, CMT
Result: 0000
Erasing area 0x00040000 - 0x0005FFFF, NOR, CMT
Result: 0000
Erasing area 0x00060000 - 0x0007FFFF, NOR, CMT
Result: 0000
Erasing area 0x00080000 - 0x0015FFFF, NOR, CMT
Result: 0000
Erasing area 0x00160000 - 0x0023FFFF, NOR, CMT
Result: 0000
Erasing area 0x01740000 - 0x0191FFFF, NOR, CMT
Result: 0000
Erasing area 0x00240000 - 0x0173FFFF, NOR, CMT
Result: 0000
Erasing area 0x022E0000 - 0x0261FFFF, NOR, CMT
Result: 0000
TIME : Erase time : 00:03:34
Write : Processing rm443__10.12.mcusw
Total 1597 [1597/0/0] blocks to write, writing...
CMT : Writing Hash CERT [NOLO]
CMT : Writing Hash CERT [KEYS]
CMT : Writing Hash CERT [PRIMAPP]
CMT : Writing Hash CERT [PASUBTOC]
CMT : Writing Hash CERT [PAPUBKEYS]
CMT : Writing Hash CERT [UPDAPP]
CMT : Writing Hash CERT [DSP0]
CMT : Writing Hash CERT [MCUSW]
CMT : Writing Hash CERT [ISA+DYNSW]
TIME : Write time : 00:01:24
MCU Write done
===Flashing [PPM]===
Erase : Processing rm443__10.12.ppm_cib
Found 1 areas to erase
Erasing area 0x01920000 - 0x022DFFFF, NOR, CMT
Result: 0000
TIME : Erase time : 00:01:12
Write : Processing rm443__10.12.ppm_cib
Total 398 [398/0/0] blocks to write, writing...
TIME : Write time : 00:00:21
PPM Write done
===Flashing [CNT]===
Erase : Processing rm443__10.12.image_cib_mn_tj_illuvial
Found 2 areas to erase
Erasing area 0x02620000 - 0x029BFFFF, NOR, CMT
Result: 0000
Erasing area 0x029C0000 - 0x03FBFFFF, NOR, CMT
Result: 0000
TIME : Erase time : 00:04:23
Checking content info...
Check Image : Content size is 128k, use direct write mode
Write : Processing rm443__10.12.image_cib_mn_tj_illuvial
Total 592 [592/0/0] blocks to write, writing...
TIME : Write time : 00:00:31
CNT Write done
ADL : End flashing

Flashing done!
Total flash time : 00:11:28
Reboot phone now...

Reading Phone Info....
Connected phone - Nokia 6303 classic
Software Info: V 10.12 08-04-10 RM-443 (c) Nokia
IMEI: 353199032485479
PPM version : V 10.12 08-04-10 RM-443 (c) Nokia CIB
Product code: 0583562
Checking...
SimLock status : SimLock Damaged!!!!! :(
Security status : Security is Ok
Read Info Done!
Checking User Certificates...
Total - 34 certs
Data exist, skip certificate repair...
AfterFlash operations done... Reconnect, wait...
Done!

Elapsed: 00:12:23

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Reading Phone Info....
Connected phone - Nokia 6303 classic
Software ver : V 10.12 08-04-10 RM-443 (c) Nokia
IMEI : 353************
Ape Ver :
APE Var :
APE ADSP:
DSP Ver : ICPR81_09w37
APE Test:
PPM : V 10.12 08-04-10 RM-443 (c) Nokia CIB
CNT : Content: cib_mn_tj_illuvial V 10.12 08-04-10 RM-443 (c) Nokia
Product SN : 0
Product code : 0583562
Base Prd.code:
Module code :
Long Prod.SN : 0
Hardware info=======
HWID :
Retu : 15
Tahvo : 22
Batery: 3490 mV
Camera:
CMT BT: 410B-v190
APE BT:
APE HW:
LCDVer: SHARP
RF ic :
Lock info ===========
IMEI : 353************
IMEI spNet : 3A 35 91 09 23 84 45 07
IMEI svNet : 33 35 91 09 23 84 45 47 F5

Unable to read Lock table... :(
CRT308 Backup Created... :)

User code : Crypted
MMC pwd : no any record found
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery]

Done!

Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
SimLock Data found!
SimLock key found!
SuperDongle Key found!
CMLA key found!
WMDRM key found!
-> Skip Flash keys Part, for Flash Part use Dead Mode or Fbus
Check phone mode...
Phone already in Test mode, skip change...

Writing SimLock Key... Ok!
Writing SimLock Data... Ok!
Writing Super Dongle Key... Ok!

SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security is Ok

CMLA key sent... Ok
WMDRM_PD key sent... Ok

Done!

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Reading Phone Info....
Connected phone - Nokia 6303 classic
Software ver : V 10.12 08-04-10 RM-443 (c) Nokia
IMEI : 353***************
Ape Ver :
APE Var :
APE ADSP:
DSP Ver : ICPR81_09w37
APE Test:
PPM : V 10.12 08-04-10 RM-443 (c) Nokia CIB
CNT : Content: cib_mn_tj_illuvial V 10.12 08-04-10 RM-443 (c) Nokia
Product SN : 0
Product code : 0583562
Base Prd.code:
Module code :
Long Prod.SN : 0
Hardware info=======
HWID :
Retu : 15
Tahvo : 22
Batery: 3490 mV
Camera:
CMT BT: 410B-v190
APE BT:
APE HW:
LCDVer: SHARP
RF ic :
Lock info ===========
IMEI : 353************
IMEI spNet : 3A 35 91 09 23 84 45 07
IMEI svNet : 33 35 91 09 23 84 45 47 F5

Conf key : 0000000000000000
Provider key : 2440700000000000
Provider : AT&T;U.S.A. (3650)
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 7

LOCK STATUS :
=============================
BLK : 1
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS : All Open
=============================
CRT308 Backup Created... :)

User code : Crypted
MMC pwd : no any record found
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery]

Done!
Спасибо за проект!

Olimjon

12.04.2011, 14:57

Best 1.19.1 beta + UFS
Nokia 6700c восстановлен без проблем.
SDData Damaged!!!!!

card found: S/N *******
registered to: Olimjon

DLL not found...
Connect phone on selected interface...

UFS S/N 82070 boot - Ok

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Read Uniq key data started...

Phone Imei: 358238030399756
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000030000022600010007600C192102011104
CMT EM0 ID : 00000C34
CMT EM1 ID : 00000C30
CMT PUB ID : 1530010E2A63034495EEA8AA2D62B9F331395058
CMT MODE ID : 00
CMT R_HASH : 25B977A055BE9B5DEC0C38A2A279C695
CMT ROM ID : 3E273BF637BE26FA

CMT : Sending 2nd loader...
Use : RAPUv11_2nd.fg
rap= 1530010E2A63034495EEA8AA2D62B9F331395058
hash= 25B977A055BE9B5DEC0C38A2A279C695
key= 97FA200683D50C7B9D135DAF1A1ECDB876F22334
Init Service mode... Wait...

Key file updated...
Done!

Checking StartUp data ...
-----------------------
SDD Key status : SDData Damaged!!!!! :(
SimLock status : SimLock is Ok
Security status : Security is Ok
-----------------------

PA_SimLock Version :
PA_SL3 phone detected

Done!

Repair SD procedure started...

Phone Imei: 358238030399756
Key file exists, no need to read...
Operating mode is OK, no need change...
Writing Super Dongle Key... Ok
Done!

Checking StartUp data ...
-----------------------
SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security is Ok
-----------------------

PA_SimLock Version :
PA_SL3 phone detected

Done!

Reading Phone Info....
Connected phone - Nokia 6700 classic
Software ver : V 13.10 16-06-10 RM-470 (c) Nokia
IMEI : 358238030399756
Ape Ver :
APE Var :
APE ADSP:
DSP Ver : ICPR81_10w09
APE Test:
PPM : V 13.10
16-06-10
RM-470
(c) Nokia
I
CNT : Content: i_ru_gold
V 13.10
16-06-10
RM-470
(c) Nokia
Product SN : KQC832795
Product code : 0571158
Base Prd.code: 0590482
Module code : 0204199
Long Prod.SN : 0
Hardware info=======
HWID : 1002
Retu : 34
Tahvo : 00
Batery: 4521 mV
Camera:
CMT BT: 410B-v190
APE BT:
APE HW:
LCDVer: TPO
RF ic : |Vapaus_5.1 | Aura_?.?
Lock info ===========
IMEI : 358238030399756
IMEI spNet :
IMEI svNet :

Conf key : 8000000000000002
Provider key : 2440700000000000
Provider : AT&T;U.S.A. (3650)
Counters : Key 1 [3] , Fbus 0 [10]
Blocks : 7

LOCK STATUS :
=============================
BLK : 1
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS : All Open
=============================
User Code : 12345
MMC pwd : no any record found
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery]

Done!

Reading User code...
User Code is: 12345
Done!

Backup Certificates now...
CRT308 Backup Created... :)
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000030000022600010007600C192102011104
CMT EM0 ID : 00000C34
CMT EM1 ID : 00000C30
CMT PUB ID : 1530010E2A63034495EEA8AA2D62B9F331395058
CMT MODE ID : 00
CMT R_HASH : 25B977A055BE9B5DEC0C38A2A279C695
CMT ROM ID : 3E273BF637BE26FA

CMT : Sending 2nd loader...
Use : RAPUv11_2nd.fg , Rev : 0.0 Ver : 1.37.1
CMT Loader sent, Boot Ok
MCU Configuration
FLASHID : 004000EC , CMT , NAND
CMT Flash ID : 004000EC < SAMSUNG [SEC] => KAT00F00RA [NAND]
FLCNT : 00030000000000000000000000000000000000
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAPUv11_algo_xsr16.fg , Rev : 0.0 Ver : 1.40.0
CMT Algo sent
CMT PAPUB : BA40E42B6F3B8A6EFEE35B4A9D15924EB132C68900
Transmission mode : Dual (Ddr, TX2)

Boot Done!

CMT : Read NPC certificate...
Cert size : 2048 byte(s)
IMEI : 358238030399756
CMT : Read CCC certificate...
Cert size : 1024 byte(s)
CMT : Read HWC certificate...
Cert size : 1024 byte(s)
CMT : Read VARIANT certificate...
Cert size : 0 byte(s)
Cert Read done!

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
SimLock Data saved...
SimLock Key saved...
WMDRM_PD Data saved...

RPL saved : C:\InfinityBox\BEST\Backup\Cert\358238030399756.rp l

Connect phone on selected interface...

Phone disconected!

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Read and Check phone data...
SimLock status : SimLock is Ok
Security status : Security is Ok
SDD Key status : SD Data is Ok

PA_SimLock Version :
PA_SL3 phone detected

Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000030000022600010007600C192102011104
CMT EM0 ID : 00000C34
CMT EM1 ID : 00000C30
CMT PUB ID : 1530010E2A63034495EEA8AA2D62B9F331395058
CMT MODE ID : 00
CMT R_HASH : 25B977A055BE9B5DEC0C38A2A279C695
CMT ROM ID : 3E273BF637BE26FA

CMT : Sending 2nd loader...
Use : RAPUv11_2nd.fg , Rev : 0.0 Ver : 1.37.1
CMT Loader sent, Boot Ok
MCU Configuration
FLASHID : 004000EC , CMT , NAND
CMT Flash ID : 004000EC < SAMSUNG [SEC] => KAT00F00RA [NAND]
FLCNT : 00030000000000000000000000000000000000
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAPUv11_algo_xsr16.fg , Rev : 0.0 Ver : 1.40.0
CMT Algo sent
CMT PAPUB : BA40E42B6F3B8A6EFEE35B4A9D15924EB132C68900
Transmission mode : Dual (Ddr, TX2)

Boot Done!

Init Service mode... Wait...

Connect phone on selected interface...

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

:appl::appl::appl::appl:

leomin

13.04.2011, 18:19

Вот и ко мне попал С7-00 RM-675. Прошивка из deadmode c файлом мassмemory RM675_010_000_M008_8GB.fpsx, BEST 1.19
Files Set for Flashing :
MCU : RM-675_014.002_79.92_prd.core.fpsx
PPM : RM-675_014.002_04.01_Russian_79.92_prd.rofs2.fpsx
PPM2 : RM-675_014.002_00.01_79.92_prd.rofs3.fpsx
CNT : RM-675_014.002_U01.01_79.92_prd.uda.fpsx
APE : RM675_010_000_M008_8GB.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000030000022600010007600C192102031104
EM0 ID: 00001040
EM1 ID: 00001030
PUBLIC ID: 11D0010F17A70344064ACFA7281953EA83F1F66F
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 11.4.0
Processing RAWLOADER...
FLIC : 006800EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 11.4.0
Boot Done! :)
TIME : Boot time : 00:00:03
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
ADL: phone is in flash mode

Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 355************
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Cert Read done!

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : C:\InfinityBox\BEST\Backup\Cert\355**********_CRT. rpl

===Flashing [MCU]===
Erase : Processing RM-675_014.002_79.92_prd.core.fpsx
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:02
Write : Processing RM-675_014.002_79.92_prd.core.fpsx
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [SOS+PMML]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [SOS*UPDAPP]
CMT: Writing Hash CERT [SOS*DSP0]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [SOS*ISASW]
CMT: Writing Hash CERT [SOS+CORE]
CMT: Writing Hash CERT [SOS+ROFS1]
Total writen 540 blocks
TIME : Write time : 00:00:17
MCU Write done
ADL: Request programm status
NAND status : 00000004 / 00000004 / 00000000

===Flashing [PPM]===
Erase : Processing RM-675_014.002_04.01_Russian_79.92_prd.rofs2.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing RM-675_014.002_04.01_Russian_79.92_prd.rofs2.fpsx
CMT: Writing Hash CERT [SOS+ROFS2]
Total writen 159 blocks
TIME : Write time : 00:00:05
PPM Write done
ADL: Request programm status
NAND status : 00000004 / 00000004 / 00000000

===Flashing [PPM2]===
Erase : Processing RM-675_014.002_00.01_79.92_prd.rofs3.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing RM-675_014.002_00.01_79.92_prd.rofs3.fpsx
CMT: Writing Hash CERT [SOS+ROFS3]
Total writen 2 blocks
TIME : Write time : 00:00:00
PPM Write done
ADL: Request programm status
NAND status : 00000004 / 00000004 / 00000000

===Flashing [CNT]===
Erase : Processing RM-675_014.002_U01.01_79.92_prd.uda.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:02
Write : Processing RM-675_014.002_U01.01_79.92_prd.uda.fpsx
Total writen 348 blocks
TIME : Write time : 00:00:14
CNT Write done
ADL: Request programm status
NAND status : 00000004 / 00000004 / 00000000

===Flashing [APE]===
Erase : Processing RM675_010_000_M008_8GB.fpsx
Partitioning eMMC area....
ADL: Request programm status
NAND status : 00000004 / 00000004 / 00000000

Partitioning Ok...
Erase : No any region, skip erase
TIME : Erase time : 00:00:00
Write : Processing RM675_010_000_M008_8GB.fpsx
Total writen 4963 blocks
TIME : Write time : 00:02:22
APE Write done
ADL: Request programm status
NAND status : 00000004 / 00000004 / 00000000

ADL: Close_Session
Content: 000300000000040000000400000000
ADL: Reboot

Flashing done!
Total flash time : 00:03:06
Reboot phone now...

Reading Phone Info....
Connected phone - Nokia C7-00
Software Info: V 92PS1_10w46.9 01-03-11 RM-675 (c) Nokia
IMEI: 355**********
Ape Version: 014.002
Product code: 059D494
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
FullFactorySet...OK!
ProductTuneSet...OK!
SwUpgradeSet...OK!
AfterFlash operations done... Reconnect, wait...
Done!

Elapsed: 00:03:52
Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Phone disconected!

Connect phone on selected interface...

Все отлично. :appl:

Layder

14.04.2011, 09:42

У кого будет пяток новых - x2, x2-01, c3, 6700, X3-2, C3-01 и подобные свежие S40 - на премет нового движка чтения телефонной проверить нужно.

X2-00:

Phone found!
Series 40 Device detected!
read info... - Ok

BackUp UserData : [PhoneBook]
Generation mode : [S40]
Cnt Server Info : 18/1982/2000
Using search engine...
Data proceed ok...
18 phonebook records are found!
VCF Records saved to : BEST\Phones_Data\IMEI\
File saved to : D:\GSM\Nokia\Best\RM-618 Nokia X2-00_356236046457933.S4pb
Read done ;)
Done...

x3-02

Phone found!
Series 40 Device detected!
read info... - Ok

Restoring UserData : [PhoneBook]
Generation mode : [S40]
S40 New Generation Detected
Cnt Server Info : 0/2000/2000
Writing Phonebook...
42 phonebook records write ok!
Done...

BackUp UserData : [PhoneBook]
Generation mode : [S40]
Cnt Server Info : 42/1958/2000
Using search engine...
Data proceed ok...
42 phonebook records are found!
VCF Records saved to : BEST\Phones_Data\IMEI\
File saved to : D:\GSM\Nokia\Best\RM-639 Nokia X3-02_353764042942197.S4pb
Read done ;)
Done...

Phone disconected!

JayDi

14.04.2011, 10:03

Ну, в общем с S40 окончательно разобрались, больше проблем с недочитанными контактами не будет.

Один момент - если читаем книгу по Fbus - внимательно смотрим лог, если увидим строчку с Error - пробуем операцию снова, так как извлекутся не все контакты, которые есть в телефоне.

Ну и потихоньку начали делать miriel под S60. B-)

JayDi

16.04.2011, 16:29

Connect phone on selected interface...

1st boot Ok , UPP : 3168
Sending 2nd...
Use : u3_2nd.fia
2nd patched Ok
2nd boot sent
MCUcfg Ok , 03
FL [01] : ID 0020883C , rev 00009321 , ST , Not In Base
FL [02] : ID 0020883C , rev 00009321 , ST , Not In Base
FLCNT : AD7EB61B23100340C605E40120A20000
Sending Algo...
Use : u3_intel.fia
Algo patched Ok
Algorithm sent
Claudia Ok
MSID : 843D7BC8C98DAF7BAFC78F2FF552
DMSID : 2C40BAE9000493D2AA000000
EFAID : 4E33FB3DDEAE08646D20ADE5
Set FAID Ok
Erase : Processing rm590__10.20.mcusw
Erasing area 0x01000000 - 0x0101FFFF
Erasing area 0x01020000 - 0x01CFFFFF
Erase done , in 00:02:04

Write : Processing rm590__10.20.mcusw
Init Write Mode Ok
Write done , in 00:01:12

Perm.Data restored Ok

1st boot Ok , UPP : 3168
Sending 2nd...
Use : u3_2nd.fia
2nd patched Ok
2nd boot sent
MCUcfg Ok , 03
FL [01] : ID 0020883C , rev 00009321 , ST , Not In Base
FL [02] : ID 0020883C , rev 00009321 , ST , Not In Base
FLCNT : AD7EB61B23100340C605E40120A20000
Sending Algo...
Use : u3_intel.fia
Algo patched Ok
Algorithm sent
Claudia Ok
MSID : 84E23C9F926EFBB2D2F2D277B351
DMSID : 3E4EBAE9000493D2AA000000
EFAID : FACCF794AB480D6983322334
Set FAID Ok
Erase : Processing rm590__10.20.ppm_el
Erasing area 0x01D00000 - 0x0217FFFF
Erase done , in 00:00:43

Write : Processing rm590__10.20.ppm_el
Init Write Mode Ok
Write done , in 00:00:11

Perm.Data restored Ok

1st boot Ok , UPP : 3168
Sending 2nd...
Use : u3_2nd.fia
2nd patched Ok
2nd boot sent
MCUcfg Ok , 03
FL [01] : ID 0020883C , rev 00009321 , ST , Not In Base
FL [02] : ID 0020883C , rev 00009321 , ST , Not In Base
FLCNT : AD7EB61B23100340C605E40120A20000
Sending Algo...
Use : u3_intel.fia
Algo patched Ok
Algorithm sent
Claudia Ok
MSID : 842A69B3AF60093152FB3BF5422D
DMSID : D26EBAF1000493D2AA000610
EFAID : BBC718E110A4C7081E7F1F57
Set FAID Ok
Erase : Processing rm590__10.20.image_el_purp
Erasing area 0x02180000 - 0x02E7FFFF
Erasing area 0x02E80000 - 0x02FBFFFF
Erase done , in 00:02:15

Write : Processing rm590__10.20.image_el_purp
Init Write Mode Ok
Write done , in 00:00:37

Perm.Data restored Ok

Switch jaf to FBUS...
FbusMode set Ok

Connect phone on selected interface...

Phone found!
Series 40 Device detected! [DCT4+]
read info... - Ok

Reading Phone Info....
SW ver : V 10.20 04-05-10 RM-590 (c) Nokia
IMEI : 358009036488228
PPM : V 10.20
04-05-10
RM-590
(c) Nokia
EL
CNT : Content: el_purp
V 10.20
04-05-10
RM-590
(c) Nokia

DSP Ver : PR72_09w52_U
PCode : 0588278
BPCode : 0582851
HWID : 1000
LCDVer : SUEZ
IMEI : 358009036488228
Sl Conf : 001-01-00000000000
Sl Prof : 800000000003000-B
Sl Aux : 000B5555
Hw Sig : 337260F4514C49DA
Provider : Default Test Operator

Lock info:
Block 1
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
Block 2
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
Block 3
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
Block 4
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
Block 5
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
Block 6
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
Block 7
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;

Done!
2220s
:)

Gatin

21.04.2011, 12:36

Отлично опробовал на 7510s rm-398 Contact service
Reading Phone Info....
Connected phone - Nokia 7510 Supernova
Software Info: V 06.65 04-06-09 RM-398 (c) Nokia
IMEI: 356394022533001
PPM version : V 06.65 04-06-09 RM-398 (c) Nokia E
Product code: 0566106
Checking...
SimLock status : SimLock Damaged!!!!! :(
Security status : Security is Ok
Read Info Done!
Checking User Certificates...
Total - 34 certs
Data exist, skip certificate repair...
AfterFlash operations done... Reconnect, wait...
Done!

Elapsed: 00:11:10

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Reading Phone Info....
Connected phone - Nokia 7510 Supernova
Software ver : V 06.65 04-06-09 RM-398 (c) Nokia
IMEI : 356394022533001
Ape Ver :
APE Var :
APE ADSP:
DSP Ver : ICPR81_09w10_pre
APE Test:
PPM : V 06.65 04-06-09 RM-398 (c) Nokia E
CNT : Content: e V 06.65 04-06-09 RM-398 (c) Nokia
Product SN : 0
Product code : 0566106
Base Prd.code:
Module code :
Long Prod.SN : 0
Hardware info=======
HWID :
Retu : 15
Tahvo : 22
Batery: 4052 mV
Camera:
CMT BT: 410B-v170
APE BT:
APE HW:
LCDVer: SEIKO
RF ic :
Lock info ===========
IMEI : 356394022533001
IMEI spNet : 3A 65 93 04 22 35 03 00
IMEI svNet : 33 65 93 04 22 35 03 20 F1

Unable to read Lock table... :(
CRT308 Backup Created... :)

User Code : 12345
MMC pwd : no any record found
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery]

Done!

Checking SL version now...
Check communication with phone....
ADL not support USB mode, check impossible, use fbus

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Checking StartUp data ...
-----------------------
SDD Key status : SDData Damaged!!!!! :(
SimLock status : SimLock Damaged!!!!! :(
Security status : Security is Ok
-----------------------

PA_SimLock Version :
PA_SL phone detected

Done!

Phone disconected!

Connect phone on selected interface...

UFS S/N 38442 boot - Ok

Connect phone on selected interface...

Read and Check phone data...
BB5 bus checking...
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000010000022600010006030C192101033000
CMT EM0 ID : 00000295
CMT EM1 ID : 00000B22
CMT PUB ID : 26D001021FAD7D5654DF4A65706A3FAA5C5CBA09
CMT MODE ID : 00
CMT R_HASH : 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT ROM ID : 273F6D55DFAAF68F

CMT : Sending 2nd loader...
Use : RAP3Gv3_2nd.fg , Rev : 0.0 Ver : 10.42.0
CMT Loader sent, Boot Ok
MCU Configuration
FLASHID : 89820089 , CMT , NOR
CMT Flash ID : 89820089 < INTEL => 0046L0Y1GG/NU48F512
FLCNT : 00000000000000000000000000000000000000
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAP3Gv3_algo_v1331.fg , Rev : 0.0 Ver : 1.33.1
CMT Algo sent
CMT PAPUB : F71CF6D1FC422794671654A7A95308F55F71E69100
Transmission mode : Dual (Ddr, TX2)

Boot Done!

Init Service mode... Wait...

Error open UFS #38442
Init Service Mode Failed, can't proceed checking... :(

Connect phone on selected interface...

UFS S/N 38442 boot - Ok

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Reading Phone Info....
Connected phone - Nokia 7510 Supernova
Software ver : V 06.65 04-06-09 RM-398 (c) Nokia
IMEI : 356394022533001
Ape Ver :
APE Var :
APE ADSP:
DSP Ver : ICPR81_09w10_pre
APE Test:
PPM : V 06.65
04-06-09
RM-398
(c) Nokia
E
CNT : Content: e
V 06.65
04-06-09
RM-398
(c) Nokia

Product SN : 0
Product code : 0566106
Base Prd.code:
Module code :
Long Prod.SN : 0
Hardware info=======
HWID :
Retu : 15
Tahvo : 22
Batery: 4624 mV
Camera:
CMT BT: Error
APE BT: Error
APE HW: Error
LCDVer: Error
RF ic : Error
Lock info ===========
IMEI : 356394022533001
IMEI spNet :
IMEI svNet :

Unable to read Lock table... :(
User Code : 12345
MMC pwd : no any record found
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery]

Done!

Read Uniq key data started...

Phone Imei: 356394022533001
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000010000022600010006030C192101033000
CMT EM0 ID : 00000295
CMT EM1 ID : 00000B22
CMT PUB ID : 26D001021FAD7D5654DF4A65706A3FAA5C5CBA09
CMT MODE ID : 00
CMT R_HASH : 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT ROM ID : 273F6D55DFAAF68F

CMT : Sending 2nd loader...
CMT Loader sent, Boot Ok
rap= 26D001021FAD7D5654DF4A65706A3FAA5C5CBA09
hash= 9DDBFCFE6E73CED7D8C6268C8EB85723
key= 24929AAFB47F3D7AD652BB6D20A58F770987641D
Init Service mode... Wait...

Key file updated...
Done!

Repair SD procedure started...

Phone Imei: 356394022533001
Key file exists, no need to read...
Operating mode is OK, no need change...
Writing Super Dongle Key... Ok
Done!

Local SX4 procedure started...

Phone Imei: 356394022533001
Key file exists, no need to read...
Step 1...
Step 2...
Step 3...
SX4 Auth - Ok
Done!

Uploading RF/Battery tune to phone...
Using : RM-398.pm
Operating mode is OK, no need change...

Field 1
Record 0 write - Ok
Record 2 write - Ok
Record 4 write - Ok
Record 6 write - Ok
Record 8 write - Ok
Record 11 write - Ok
Record 12 write - Ok
Record 13 write - Ok
Record 16 write - Ok
Record 18 write - Ok
Record 21 write - Ok
Record 26 write - Ok
Record 28 write - Ok
Record 29 write - Ok
Record 31 write - Ok
Field 309
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 4 write - Ok
Record 7 write - Ok
Record 17 write - Ok

Check ST_SECURITY now...
Security status : ST_SECURITY => OK

Done!

Elapsed: 00:00:03

Reading Phone Info....
Connected phone - Nokia 7510 Supernova
Software ver : V 06.65 04-06-09 RM-398 (c) Nokia
IMEI : 356394022533001
Ape Ver :
APE Var :
APE ADSP:
DSP Ver : ICPR81_09w10_pre
APE Test:
PPM : V 06.65
04-06-09
RM-398
(c) Nokia
E
CNT : Content: e
V 06.65
04-06-09
RM-398
(c) Nokia

Product SN : 0
Product code : 0566106
Base Prd.code:
Module code :
Long Prod.SN : 0
Hardware info=======
HWID :
Retu : 15
Tahvo : 22
Batery: 4629 mV
Camera:
CMT BT: Error
APE BT: Error
APE HW: Error
LCDVer: Error
RF ic : 0831
Lock info ===========
IMEI : 356394022533001
IMEI spNet :
IMEI svNet :

Unable to read Lock table... :(
User Code : 12345
MMC pwd : no any record found
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery]

Done!

Checking StartUp data ...
-----------------------
SDD Key status : SD Data is Ok
SimLock status : SimLock Damaged!!!!! :(
Security status : Security is Ok
-----------------------

PA_SimLock Version :
PA_SL phone detected

Done!

Repair SL procedure started...

Phone Imei: 356394022533001
Key file exists, no need to read...
Operating mode is OK, no need change...
Writing SimLock Data... Ok
Writing SimLock Key... Ok
Done!

LASDORF

22.04.2011, 08:07

Работа с BEST версии 1.20

подопытное тело - Nokia 5530XM RM-504

запись RPL через интерфейс UFS
Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
SimLock Data found!
SimLock key found!
SuperDongle Key found!
CMLA key found!
WMDRM key found!
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000010000022600010006400C192101051105
CMT EM0 ID : 00000296
CMT EM1 ID : 00000B22
CMT PUB ID : 18700116ED7B00527B16C300A05BDCDF97665AFC
CMT MODE ID : 00
CMT R_HASH : B8C3ADECFC997FCD8081D3DEAF870B8C
CMT ROM ID : 4B9B75103E691FF8

UFSx doesn't support New Protocol :(

Boot failed! :(
If phone RAPUYAMA, RAP3Gv4 or BroadComm - Use USB cable ;)

Init Service mode... Wait...

Phone disconected!

Connect phone on selected interface...

Check phone mode...
Phone in Local mode
Seting Test mode... wait...
Phone found!
Series 60 Device detected!
read info... - Ok

Test mode set

Writing SimLock Key... Ok!
Writing SimLock Data... Ok!
Writing Super Dongle Key... Ok

SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Phone disconected!

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Чек SimLock Data/SD Data

Checking StartUp data ...
-----------------------
SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security is Ok
-----------------------

PA_SimLock Version :
PA_SL3 phone detected

Done!

Попытка записать прошивку через UFS-интерфейс окончилась тем, что BEST сообщил о неподдерживаемом новом протоколе:
UFS S/N 70*** boot - Ok

Connect phone on selected interface...

Core version : 1.20 , Rev : 4.0

Selected FlashSettings : Manual
Files Set for Flashing :
MCU : RM-504_11.0.054_prd.core.C00
PPM : RM-504_11.0.054_prd.rofs2.V05
PPM2 : RM-504_11.0.054_C03_prd.rofs3.fpsx
CNT : RM504_11.0.054_002_000_U001.uda.fpsx
Check FlashFiles, Please, wait...
-> SWversion check skipped : Dead mode selected

Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000010000022600010006400C192101051105
CMT EM0 ID : 00000296
CMT EM1 ID : 00000B22
CMT PUB ID : 18700116ED7B00527B16C300A05BDCDF97665AFC
CMT MODE ID : 00
CMT R_HASH : B8C3ADECFC997FCD8081D3DEAF870B8C
CMT ROM ID : 4B9B75103E691FF8

UFSx doesn't support New Protocol :(

Connect phone on selected interface...

Попытка записать прошивку через JAF-интерфейс приводит к зависанию программы:
card found: S/N ******
registered to: ********

Connect phone on selected interface...

Opening Connection...
Device Location: 00000571
Connect Ok!
Initializing Connection...
JAF Firmware: 01.B5

JAF S/N OD***** boot - Ok
Switch jaf to FBUS...
FbusMode set Ok

Connect phone on selected interface...

Core version : 1.20 , Rev : 4.0

Selected FlashSettings : Manual
Files Set for Flashing :
MCU : RM-504_11.0.054_prd.core.C00
PPM : RM-504_11.0.054_prd.rofs2.V05
PPM2 : RM-504_11.0.054_C03_prd.rofs3.fpsx
CNT : RM504_11.0.054_002_000_U001.uda.fpsx
Checking BUS...
Switch jaf to FlashMode...
FlashMode set Ok
Booting phone...

BOOT 1ST : C0

CMT part info :
CMT ASICID : 000000010000022600010006400C192101051105
CMT EM0 ID : 00000296
CMT EM1 ID : 00000B22
CMT PUB ID : 18700116ED7B00527B16C300A05BDCDF97665AFC
CMT MODE ID : 00
CMT R_HASH : B8C3ADECFC997FCD8081D3DEAF870B8C
CMT ROM ID : 4B9B75103E691FF8

Change Protocol : NEW

Using NEW Flashing Protocol

CMT : Sending 2nd loader...
Use : RAPIDOv11_2nd.fg
CMT Loader sent, Boot Ok
Trans Req : 32 bit, DualLine, Set : 32 bit, DualLine
В статусной строке ПО горит JAF: CMT 2ND boot...

Может, поддержка HASH B8C3ADECFC997FCD8081D3DEAF870B8C еще не реализована должным образом?
При нажатии кнопки CHECK на вкладке Flashing происходит аналогичное зависание...

Прошивка по USB в режиме DeadMode:
Core version : 1.20 , Rev : 4.0

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : RM-504_32.0.007_prd.core.C00
PPM : RM-504_32.0.007_prd.rofs2.V05
PPM2 : RM-504_32.0.007.298.01_prd.rofs3.fpsx
CNT : RM504_32.0.007_001_U229.uda.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Press phone's power button or insert cable & charger! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000010000022600010006400C192101051105
CPU ID : RAPIDO v11 , Features : Dead-Test
EM0 ID: 00000296
EM1 ID: 00000B22
PUBLIC ID: 18700116ED7B00527B16C300A05BDCDF97665AFC
ASIC MODE ID: 00
ROOT KEY HASH: B8C3ADECFC997FCD8081D3DEAF870B8C
ROM ID: 4B9B75103E691FF8
PatchRAWLoader: Patched OK
Processing RAWLOADER...
Processing RAP3NAND ...
Processing PASUBTOC ...
Processing PAPUBKEYS...
Processing UPDAPP ...
Boot Done! :)
TIME : Boot time : 00:00:06
Reopening the connection...
Waiting for response: 30
ADL -> [2nd] changing...
ADL Server confirm flashmode!
ADL : Auth done...
ADL : ASIC CMT select Ok
===Flashing [MCU]===
Erase : Processing RM-504_32.0.007_prd.core.C00
Found 5 areas to erase
Erasing area 0x00040000 - 0x00082FFF, NAND, CMT
Result: 0000
Erasing area 0x00083400 - 0x003FFFFF, NAND, CMT
Result: 0000
Erasing area 0x00400000 - 0x007FFFFF, NAND, CMT
Result: 0000
Erasing area 0x00800000 - 0x00D5FFFF, NAND, CMT
Result: 0000
Erasing area 0x00D60000 - 0x09E5FFFF, NAND, CMT
Result: 0000
Erase partition 0x0A
Partition erase Ok
Partitioning : Ok [5]
TIME : Erase time : 00:00:01
Write : Processing RM-504_32.0.007_prd.core.C00
Total 434 [434/0/0] blocks to write, writing...
CMT : Writing Hash CERT [ADA]
CMT : Writing Hash CERT [KEYS]
CMT : Writing Hash CERT [PRIMAPP]
CMT : Writing Hash CERT [RAP3NAND]
CMT : Writing Hash CERT [PASUBTOC]
CMT : Writing Hash CERT [PAPUBKEYS]
CMT : Writing Hash CERT [SOS*UPDAPP]
CMT : Writing Hash CERT [SOS*ENO]
CMT : Writing Hash CERT [SOS*DSP0]
CMT : Writing Hash CERT [SOS*ISASW]
CMT : Writing Hash CERT [SOS+CORE]
CMT : Writing Hash CERT [SOS+ROFS1]
TIME : Write time : 00:01:36
MCU Write done
===Flashing [PPM]===
Erase : Processing RM-504_32.0.007_prd.rofs2.V05
Found 1 areas to erase
Erasing area 0x07260000 - 0x0935FFFF, NAND, CMT
Result: 0000
TIME : Erase time : 00:00:00
Write : Processing RM-504_32.0.007_prd.rofs2.V05
Total 114 [114/0/0] blocks to write, writing...
CMT : Writing Hash CERT [SOS+ROFS2]
TIME : Write time : 00:00:21
PPM Write done
===Flashing [PPM2]===
Erase : Processing RM-504_32.0.007.298.01_prd.rofs3.fpsx
Found 1 areas to erase
Erasing area 0x09360000 - 0x09E5FFFF, NAND, CMT
Result: 0000
TIME : Erase time : 00:00:00
Write : Processing RM-504_32.0.007.298.01_prd.rofs3.fpsx
Total 23 [23/0/0] blocks to write, writing...
CMT : Writing Hash CERT [SOS+ROFS3]
TIME : Write time : 00:00:02
PPM Write done
===Flashing [CNT]===
Erase : Processing RM504_32.0.007_001_U229.uda.fpsx
Found 1 areas to erase
Erasing area 0x09E60000 - 0x0F71FFFF, NAND, CMT
Result: 0000
TIME : Erase time : 00:00:00
Write : Processing RM504_32.0.007_001_U229.uda.fpsx
Total 44 [44/0/0] blocks to write, writing...
TIME : Write time : 00:00:05
CNT Write done
=================
ADL : End flashing
ADL : Finalize...

Flashing done!
Total flash time : 00:02:05
Reboot phone now...

Settings After Flash Defaults...
FullFactorySet...OK!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Set phone to Normal mode...
AfterFlash operations done...
Done!

Elapsed: 00:02:26
Connect phone on selected interface...

JayDi

22.04.2011, 09:00

LASDORF

22.04.2011, 10:24

Либо версия прошивки в JAF-е не подходит (честно скажу с 1.B5 не пробовал, 1.B2, 1.B4, 1.B6 - шил 5530, читал/писал RPL) Если есть возмождность, опробуйте с другими версиями прошивки коробки.

Понизил прошивку в адаптере JAF до 01.B2 - BEST перестала его переключать в режим Flashmode.
Повысил до версии 01.B4 - та же история, что и с 01.B5 - виснет...

Камрады, поделитесь прошивкой для JAF - 01.B6, пожалуйста. Может, с нею прокатит.

Кстати, тестил на двух разных компах с одинаковым результатом. Затирать и шить? проливать RPL в тело через JAF BEST отказывается.

Yutex

22.04.2011, 10:32

Версия Best 1.20
Не записался заводской rpl через UFS в 5130 (RM-495)
Через USB - нормально

Connect phone on selected interface...

UFS S/N xxxxx boot - Ok

Connect phone on selected interface...

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Reading Phone Info....
Connected phone - Nokia 5130c-2
Software ver : V 06.65 01-04-09 RM-495 (c) Nokia
IMEI : 355xxxxxxxxxxxxx
Ape Ver :
APE Var :
APE ADSP:
DSP Ver : ICPR72_09w03
APE Test:
PPM : V 06.65
01-04-09
RM-495
(c) Nokia
EL
CNT : Content: el_blu
V 06.65
01-04-09
RM-495
(c) Nokia

Product SN : 0
Product code :
Base Prd.code:
Module code :
Long Prod.SN : 0
Hardware info=======
HWID :
Retu : 16
Tahvo : 22
Batery: 4688 mV
Camera:
CMT BT: 2222-143C
APE BT:
APE HW:
LCDVer: SEIKO
RF ic : 06540601
Lock info ===========
IMEI : 355xxxxxxxxxxxx
IMEI spNet :
IMEI svNet :

Unable to read Lock table... :(
User code : Crypted
MMC pwd : Backup saved
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery]

Done!

Will Write RPL keys now...
Check RPL file...
NMP RPL Detected, converting...
Convert done!
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
SimLock Data found!
SimLock key found!
SuperDongle Key found!
CMLA key found!
WMDRM key found!
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000010000022600010006030C192101033000
CMT EM0 ID : 00000296
CMT EM1 ID : 00000B22
CMT PUB ID : 11600213220A7E56117DFCA35A5D43122A0BA1C7
CMT MODE ID : 00
CMT R_HASH : 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT ROM ID : 273F6D55DFAAF68F

CMT : Sending 2nd loader...
Use : RAP3Gv3_2nd.fg , Rev : 0.0 Ver : 10.42.0
CMT Loader sent, Boot Ok
MCU Configuration
FLASHID : 89820089 , CMT , NOR
CMT Flash ID : 89820089 < INTEL => 0046L0Y1GG/NU48F512
FLCNT : 00000000000000000000000000000000000000
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAP3Gv3_algo.fg , Rev : 0.0 Ver : 10.40.0
CMT Algo sent
CMT PAPUB : 917F11196FDB7378C18EF7260698CA4489DCA02700
Transmission mode : Dual (Ddr, TX2)

Boot Done!

Preparing for write certificates...

Switching to CMT...

CMT : NPC erase Ok
Programming report : Error
Writing NPC... Ok

CMT : CCC erase Ok
Programming report : Error
Writing CCC... Ok

CMT : HWC erase Ok
Programming report : Error
Writing HWC... Ok

Init Service mode... Wait...

Check phone mode...
Phone already in Test mode, skip change...

Writing SimLock Key... Error!
Writing SimLock Data... Error!
Writing Super Dongle Key... Ok

SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!! :(

Done!

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Reading Phone Info....
Connected phone - Nokia 5130c-2
Software ver : V 06.65 01-04-09 RM-495 (c) Nokia
IMEI : 12345610654321?
Ape Ver :
APE Var :
APE ADSP:
DSP Ver : ICPR72_09w03
APE Test:
PPM : V 06.65
01-04-09
RM-495
(c) Nokia
EL
CNT : Content: el_blu
V 06.65
01-04-09
RM-495
(c) Nokia

Product SN : 0
Product code :
Base Prd.code:
Module code :
Long Prod.SN : 0
Hardware info=======
HWID :
Retu : 16
Tahvo : 22
Batery: 4680 mV
Camera:
CMT BT: 2222-143C
APE BT:
APE HW:
LCDVer: SEIKO
RF ic : 06540601
Lock info ===========
IMEI : 12345610654321?
IMEI spNet :
IMEI svNet :

Unable to read Lock table... :(
User code : Crypted
MMC pwd : Backup saved

ildar

22.04.2011, 10:36

Понизил прошивку в адаптере JAF до 01.B2 - BEST перестала его переключать в режим FBUS.
Повысил до версии 01.B4 - та же история, что и с 01.B5 - виснет...

Камрады, поделитесь прошивкой для JAF - 01.B6, пожалуйста. Может, с нею прокатит.

Кстати, тестил на двух разных компах с одинаковым результатом. Затирать и шить? проливать RPL в тело через JAF BEST отказывается.

Прошу.

JayDi

22.04.2011, 10:56

Yutex, пробовали один раз? лог странный очень.

LASDORF, Поставил 5530 на прошивку

Connect phone on selected interface...

Opening Connection...
Device Location: 00000012
Connect Ok!
Initializing Connection...
JAF Firmware: 01.B6

JAF S/N ODJAF000 boot - Ok
Switch jaf to FBUS...
FbusMode set Ok

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Core version : 1.20 , Rev : 4.0

Selected FlashSettings :
Files Set for Flashing :
MCU : RM-504_32.0.007_prd.core.C00
PPM : RM-504_32.0.007_prd.rofs2.V05
PPM2 : RM-504_32.0.007_C01_prd.rofs3.fpsx
CNT : RM-504_32.0.007_007_000_U001.uda.fpsx
Checking BUS...
Switch jaf to FlashMode...
FlashMode set Ok
Booting phone...

BOOT 1ST : C0

CMT part info :
CMT ASICID : 000000010000022600010006400C192101051105
CMT EM0 ID : 00000296
CMT EM1 ID : 00000B22
CMT PUB ID : 03200108B49E00527F73549FB5442598B49546E8
CMT MODE ID : 00
CMT R_HASH : B8C3ADECFC997FCD8081D3DEAF870B8C
CMT ROM ID : 4B9B75103E691FF8

Change Protocol : NEW

Using NEW Flashing Protocol

CMT : Sending 2nd loader...
Use : RAPIDOv11_2nd.fg
CMT Loader sent, Boot Ok
Trans Req : 32 bit, DualLine, Set : 32 bit, DualLine
CMT Flash ID : 00400020 < ST => M39BORBOAD
FLIC : 00400020 , NAND , CMT

Sending Algo...
Use RAPIDOv11_XSR17_alg.fg
Finalize done, Algo sent!
Trans Req : 32 bit, DualLine, Set : 32 bit, DualLine
PapubKeysReq : F2B05364E563A348608C1C3C9E54FE42AAAA1ACF80
Boot done!

CMT : Read NPC certificate...
IMEI : 358304035965130
CMT : Read CCC certificate...
CMT : Read HWC certificate...
Cert Read done!

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : c:\InfinityBox\BEST\Backup\Cert\358304035965130_CR T_2nd.rpl

Checking BUS...
Switch jaf to FlashMode...
FlashMode set Ok
Booting phone...

BOOT 1ST : C0

CMT part info :
CMT ASICID : 000000010000022600010006400C192101051105
CMT EM0 ID : 00000296
CMT EM1 ID : 00000B22
CMT PUB ID : 03200108B49E00527F73549FB5442598B49546E8
CMT MODE ID : 00
CMT R_HASH : B8C3ADECFC997FCD8081D3DEAF870B8C
CMT ROM ID : 4B9B75103E691FF8

Change Protocol : NEW

Using NEW Flashing Protocol

CMT : Sending 2nd loader...
Use : RAPIDOv11_2nd.fg
CMT Loader sent, Boot Ok
Trans Req : 32 bit, DualLine, Set : 32 bit, DualLine
CMT Flash ID : 00400020 < ST => M39BORBOAD
FLIC : 00400020 , NAND , CMT

Sending Algo...
Use RAPIDOv11_XSR17_alg.fg
Finalize done, Algo sent!
Trans Req : 32 bit, DualLine, Set : 32 bit, DualLine
PapubKeysReq : F2B05364E563A348608C1C3C9E54FE42AAAA1ACF80
Boot done!

SC : StoreCert Ok

Partitioning....
Partitioning Ok...
Erase : Processing RM-504_32.0.007_prd.core.C00
Init Erase Mode Ok
Found 2 data types
Erasing Data....
Erase area : 0x00040000 - 0x00082FFF , CMT , NAND
Erase area : 0x00083400 - 0x003FFFFF , CMT , NAND
Erase area : 0x00400000 - 0x007FFFFF , CMT , NAND
Erase area : 0x00800000 - 0x00D5FFFF , CMT , NAND
Erase area : 0x00D60000 - 0x09E5FFFF , CMT , NAND
Erase Ok...
Erasing Partition....
Partition 0x0A
Erase Ok...
TIME : Erase time : 00:00:01
Write : Processing RM-504_32.0.007_prd.core.C00
Init Write Mode Ok
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [SOS*UPDAPP]
CMT: Writing Hash CERT [SOS*ENO]
CMT: Writing Hash CERT [SOS*DSP0]
CMT: Writing Hash CERT [SOS*ISASW]
CMT: Writing Hash CERT [SOS+CORE]
CMT: Writing Hash CERT [SOS+ROFS1]

ildar

22.04.2011, 11:44

При попытки RD Key (6700 rm-470)
JAF ошибка

registered to: ajab_dongl

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Checking StartUp data ...
-----------------------
SDD Key status : SDData Damaged!!!!! :(
SimLock status : SimLock is Ok
Security status : Security is Ok
-----------------------

PA_SimLock Version :
PA_SL3 phone detected

Done!

Phone disconected!

Connect phone on selected interface...

Opening Connection...
Device Location: 00000061
Connect Ok!
Initializing Connection...
JAF Firmware: 01.B6

JAF S/N ODJAF000 boot - Ok
Switch jaf to FBUS...
FbusMode set Ok

Connect phone on selected interface...

Read Uniq key data started...

Checking BUS...
Switch jaf to FlashMode...
FlashMode set Ok
Booting phone...
Switch jaf to FlashMode...
FlashMode set Ok
Booting phone...
Switch jaf to FlashMode...
FlashMode set Ok
Booting phone...
Switch jaf to FlashMode...
FlashMode set Ok
Booting phone...
Switch jaf to FlashMode...
FlashMode set Ok
Booting phone...
Switch jaf to FlashMode...
FlashMode set Ok
Booting phone...
Error Get Root
Error fetching data... :(

Read fail...!

Switch jaf to FBUS...
FbusMode set Ok

Phone found!
Series 40 Device detected!
read info... - Ok

BEST ver 1.20

UFS все прошло с первого раза
registered to: ajab

Connect phone on selected interface...

UFS S/N 79236 boot - Ok

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Read Uniq key data started...

Phone Imei: 358238038930412
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000030000022600010007600C192102011104
CMT EM0 ID : 00000C34
CMT EM1 ID : 00000C30
CMT PUB ID : 2890000BE36103447741E4B94D13296882852B2F
CMT MODE ID : 00
CMT R_HASH : 25B977A055BE9B5DEC0C38A2A279C695
CMT ROM ID : 3E273BF637BE26FA

CMT : Sending 2nd loader...
Use : RAPUv11_2nd.fg
rap= 2890000BE36103447741E4B94D13296882852B2F
hash= 25B977A055BE9B5DEC0C38A2A279C695
key= 21120781AE77BBCD680A50BA8BA30099D92FE6B4
Init Service mode... Wait...

Key file updated...
Done!

а вот Local SX4 не проходит
Checking StartUp data ...
-----------------------
SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!! :(
-----------------------

PA_SimLock Version :
PA_SL3 phone detected

Done!

Local SX4 procedure started...

Phone Imei: 358238038930412
Key file exists, no need to read...
Step 1...
Step 2...
SX4 Auth fail...

PANsoft

22.04.2011, 12:40

а вот Local SX4 не проходит
Checking StartUp data ...
-----------------------
SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!! :(
-----------------------

PA_SimLock Version :
PA_SL3 phone detected

Done!

Local SX4 procedure started...

Phone Imei: 358238038930412
Key file exists, no need to read...
Step 1...
Step 2...
SX4 Auth fail...

Учим матчасть, сначала репеер SDD потом Autch с галкой custom key

ildar

22.04.2011, 13:10

Учим матчасть, сначала репеер SDD потом Autch с галкой custom key

Спасибо. Все сделано

card found: S/N
registered to: ajab

Connect phone on selected interface...

UFS S/N 79236 boot - Ok

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Backup Certificates now...
CRT308 Backup Created... :)
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000030000022600010007600C192102011104
CMT EM0 ID : 00000C34
CMT EM1 ID : 00000C30
CMT PUB ID : 2890000BE36103447741E4B94D13296882852B2F
CMT MODE ID : 00
CMT R_HASH : 25B977A055BE9B5DEC0C38A2A279C695
CMT ROM ID : 3E273BF637BE26FA

CMT : Sending 2nd loader...
Use : RAPUv11_2nd.fg , Rev : 0.0 Ver : 1.37.1
CMT Loader sent, Boot Ok
MCU Configuration
FLASHID : 004000EC , CMT , NAND
CMT Flash ID : 004000EC < SAMSUNG [SEC] => KAT00F00RA [NAND]
FLCNT : 00030000000000000000000000000000000000
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAPUv11_algo_xsr16.fg , Rev : 0.0 Ver : 1.40.0
CMT Algo sent
CMT PAPUB : BA40E42B6F3B8A6EFEE35B4A9D15924EB132C68900
Transmission mode : Dual (Ddr, TX2)

Boot Done!

CMT : Read NPC certificate...
Cert size : 2048 byte(s)
IMEI : 358238038930412
CMT : Read CCC certificate...
Cert size : 1024 byte(s)
CMT : Read HWC certificate...
Cert size : 1024 byte(s)
CMT : Read VARIANT certificate...
Cert size : 0 byte(s)
Cert Read done!

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
SimLock Data saved...
SimLock Key saved...

RPL saved : D:\BEST\Backup\Cert\358238038930412_2nd.rpl

Connect phone on selected interface...

Phone disconected!

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

User ACCEPTED FULL ERASE
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000030000022600010007600C192102011104
CMT EM0 ID : 00000C34
CMT EM1 ID : 00000C30
CMT PUB ID : 2890000BE36103447741E4B94D13296882852B2F
CMT MODE ID : 00
CMT R_HASH : 25B977A055BE9B5DEC0C38A2A279C695
CMT ROM ID : 3E273BF637BE26FA

CMT : Sending 2nd loader...
Use : RAPUv11_2nd.fg , Rev : 0.0 Ver : 1.37.1
CMT Loader sent, Boot Ok
MCU Configuration
FLASHID : 004000EC , CMT , NAND
CMT Flash ID : 004000EC < SAMSUNG [SEC] => KAT00F00RA [NAND]
FLCNT : 00030000000000000000000000000000000000
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAPUv11_algo_xsr16.fg , Rev : 0.0 Ver : 1.40.0
CMT Algo sent
CMT PAPUB : BA40E42B6F3B8A6EFEE35B4A9D15924EB132C68900
Transmission mode : Dual (Ddr, TX2)

Boot Done!

Full Erase started...
Asic : CMT , Sub : NAND
Erase Area 0x00000000-0x0FFFFFFF
Erasing, wait.....
CMT : Erase Ok
Done

Phone disconected!

Connect phone on selected interface...

Connect phone on selected interface...

Core version : 1.20 , Rev : 4.0

Selected FlashSettings : FullFlash
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm470__13.10.mcusw
PPM : rm470__13.10.ppm_i
CNT : rm470__13.10_ISM_020.image_i_ru_chrome
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000030000022600010007600C192102011104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00000C34
EM1 ID: 00000C30
PUBLIC ID: 2890000BE36103447741E4B94D13296882852B2F
ASIC MODE ID: 00
ROOT KEY HASH: 25B977A055BE9B5DEC0C38A2A279C695
ROM ID: 3E273BF637BE26FA
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 11.10.0
Processing RAWLOADER...
FLIC : 004000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 11.10.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:12
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
ADL: phone is in flash mode
===Flashing [MCU]===
Erase : Processing rm470__13.10.mcusw
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:02
Write : Processing rm470__13.10.mcusw
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [UPDAPP]
CMT: Writing Hash CERT [DSP0]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [MCUSW]
CMT: Writing Hash CERT [ISA+DYNSW]
Total writen 218 blocks
TIME : Write time : 00:00:04
MCU Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

===Flashing [PPM]===
Erase : Processing rm470__13.10.ppm_i
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm470__13.10.ppm_i
Total writen 52 blocks
TIME : Write time : 00:00:01
PPM Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

===Flashing [CNT]===
Erase : Processing rm470__13.10_ISM_020.image_i_ru_chrome
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:02
Write : Processing rm470__13.10_ISM_020.image_i_ru_chrome
Total writen 207 blocks
TIME : Write time : 00:00:03
CNT Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

ADL: Close_Session
Content: 000300000000000000000000000000
ADL: Reboot

Flashing done!
Total flash time : 00:00:13
Reboot phone now...

-> Flashing Failed! :( Maybee HW error, or Downgrade try???!
Anyway - try reinsert battery and PowerUp phone manualy

Connect phone on selected interface...

Done!

Elapsed: 00:02:30
Connect phone on selected interface...

User ACCEPTED FULL ERASE
Setting FlashMode
FlashMode set Ok
No answer from phone... :(
1. Check cable/connection, try again
2. Maybe HW fault or bad cable

Error booting phone...
Check Cable/HW , Try Again

Connect phone on selected interface...

UFS S/N 79236 boot - Ok

Connect phone on selected interface...

User ACCEPTED FULL ERASE
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000030000022600010007600C192102011104
CMT EM0 ID : 00000C34
CMT EM1 ID : 00000C30
CMT PUB ID : 2890000BE36103447741E4B94D13296882852B2F
CMT MODE ID : 00
CMT R_HASH : 25B977A055BE9B5DEC0C38A2A279C695
CMT ROM ID : 3E273BF637BE26FA

CMT : Sending 2nd loader...
Use : RAPUv11_2nd.fg , Rev : 0.0 Ver : 1.37.1
CMT Loader sent, Boot Ok
MCU Configuration
FLASHID : 004000EC , CMT , NAND
CMT Flash ID : 004000EC < SAMSUNG [SEC] => KAT00F00RA [NAND]
FLCNT : 00030000000000000000000000000000000000
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAPUv11_algo_xsr16.fg , Rev : 0.0 Ver : 1.40.0
CMT Algo sent
PAPUBkeys blank (erased or HW failure)
Transmission mode : Dual (Ddr, TX2)

Boot Done!

Full Erase started...
Asic : CMT , Sub : NAND
Erase Area 0x00000000-0x0FFFFFFF
Erasing, wait.....
CMT : Erase Ok
Done

Connect phone on selected interface...

UFS S/N 79236 boot - Ok

Connect phone on selected interface...

User ACCEPTED FULL ERASE
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000030000022600010007600C192102011104
CMT EM0 ID : 00000C34
CMT EM1 ID : 00000C30
CMT PUB ID : 2890000BE36103447741E4B94D13296882852B2F
CMT MODE ID : 00
CMT R_HASH : 25B977A055BE9B5DEC0C38A2A279C695
CMT ROM ID : 3E273BF637BE26FA

CMT : Sending 2nd loader...
Use : RAPUv11_2nd.fg , Rev : 0.0 Ver : 1.37.1
CMT Loader sent, Boot Ok
MCU Configuration
FLASHID : 004000EC , CMT , NAND
CMT Flash ID : 004000EC < SAMSUNG [SEC] => KAT00F00RA [NAND]
FLCNT : 00030000000000000000000000000000000000
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAPUv11_algo_xsr16.fg , Rev : 0.0 Ver : 1.40.0
CMT Algo sent
PAPUBkeys blank (erased or HW failure)
Transmission mode : Dual (Ddr, TX2)

Boot Done!

Full Erase started...
Asic : CMT , Sub : NAND
Erase Area 0x00000000-0x0FFFFFFF
Erasing, wait.....
Erase CMT Finished , [FF]
CMT : Erase Ok
Done

Core version : 1.20 , Rev : 4.0

Selected FlashSettings : FullFlash
Files Set for Flashing :
MCU : rm470_va07.60_eno_0.17060.mcusw_combined
PPM : rm470__07.60.ppm_a
CNT : rm470__07.60_ISM_999.image_a_Test
Check FlashFiles, Please, wait...
-> SWversion check skipped : Dead mode selected

Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000030000022600010007600C192102011104
CMT EM0 ID : 00000C34
CMT EM1 ID : 00000C30
CMT PUB ID : 2890000BE36103447741E4B94D13296882852B2F
CMT MODE ID : 00
CMT R_HASH : 25B977A055BE9B5DEC0C38A2A279C695
CMT ROM ID : 3E273BF637BE26FA

CMT : Sending 2nd loader...
Use : RAPUv11_2nd.fg , Rev : 0.0 Ver : 1.37.1
CMT Loader sent, Boot Ok
MCU Configuration
FLASHID : 004000EC , CMT , NAND
CMT Flash ID : 004000EC < SAMSUNG [SEC] => KAT00F00RA [NAND]
FLCNT : 00030000000000000000000000000000000000
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAPUv11_algo_xsr16.fg , Rev : 0.0 Ver : 1.40.0
CMT Algo sent
PAPUBkeys blank (erased or HW failure)
Transmission mode : Dual (Ddr, TX2)

Boot Done!

Transmission mode : Dual (Ddr, TX2)
Erase : Processing rm470_va07.60_eno_0.17060.mcusw_combined
Erase CRTFL : ADA
CMT : CRTFL erase Ok
Erase CRTFL : RAP3NAND
CMT : CRTFL erase Ok
Erase CRTFL : DSP0
CMT : CRTFL erase Ok
Erase CRTFL : MCUSW
CMT : CRTFL erase Ok
Erase Partition 0x08 , CMT , NAND
CMT : Partition erase Ok
Erase Partition 0x0A , CMT , NAND
CMT : Partition erase Ok
Erase Partition 0x0B , CMT , NAND
CMT : Partition erase Ok
TIME : Erase time : 00:00:02
Programming report : Error MCUS
Transmission mode : Dual (Ddr, TX2)
Write : Processing rm470_va07.60_eno_0.17060.mcusw_combined
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [DSP0]
CMT: Writing Hash CERT [MCUSW]
Total writen 42 blocks
TIME : Write time : 00:00:21

Partitioning....
Partitioning Ok...
Transmission mode : Dual (Ddr, TX2)
Erase : Processing rm470__07.60.ppm_a
Found 1 areas to erase, erase group
Asic : CMT , Sub : NAND
CMT , NAND , Area : 0x01F20000 - 0x028FFFFF
Erasing, wait.....
CMT : Group erase Ok
TIME : Erase time : 00:00:00
Transmission mode : Dual (Ddr, TX2)
Write : Processing rm470__07.60.ppm_a
Total writen 50 blocks
TIME : Write time : 00:00:34

Partitioning....
Partitioning Ok...
Transmission mode : Dual (Ddr, TX2)
Erase : Processing rm470__07.60_ISM_999.image_a_Test
Found 1 areas to erase, erase group
Asic : CMT , Sub : NAND
CMT , NAND , Area : 0x02FC0000 - 0x0F2BFFFF
Erasing, wait.....
CMT : Group erase Ok
Erase Partition 0x08 , CMT , NAND
CMT : Partition erase Ok
TIME : Erase time : 00:00:02
Transmission mode : Dual (Ddr, TX2)
Write : Processing rm470__07.60_ISM_999.image_a_Test
Total writen 194 blocks
TIME : Write time : 00:02:14

Init Service mode... Wait...

Init Service mode Failed! Skip AfterFlash :(
Connect phone on selected interface...

Elapsed: 00:00:08
Connect phone on selected interface...

Core version : 1.20 , Rev : 4.0

Selected FlashSettings : FullFlash
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm470__13.10.mcusw
PPM : rm470__13.10.ppm_i
CNT : rm470__13.10_ISM_020.image_i_ru_chrome
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000030000022600010007600C192102011104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00000C34
EM1 ID: 00000C30
PUBLIC ID: 2890000BE36103447741E4B94D13296882852B2F
ASIC MODE ID: 00
ROOT KEY HASH: 25B977A055BE9B5DEC0C38A2A279C695
ROM ID: 3E273BF637BE26FA
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 11.10.0
Processing RAWLOADER...
FLIC : 004000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 11.10.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:01
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
ADL: phone is in flash mode
===Flashing [MCU]===
Erase : Processing rm470__13.10.mcusw
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm470__13.10.mcusw
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [UPDAPP]
CMT: Writing Hash CERT [DSP0]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [MCUSW]
CMT: Writing Hash CERT [ISA+DYNSW]
Total writen 218 blocks
TIME : Write time : 00:00:04
MCU Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

===Flashing [PPM]===
Erase : Processing rm470__13.10.ppm_i
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm470__13.10.ppm_i
Total writen 52 blocks
TIME : Write time : 00:00:01
PPM Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

===Flashing [CNT]===
Erase : Processing rm470__13.10_ISM_020.image_i_ru_chrome
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:02
Write : Processing rm470__13.10_ISM_020.image_i_ru_chrome
Total writen 207 blocks
TIME : Write time : 00:00:03
CNT Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

ADL: Close_Session
Content: 000300000000000000000000000000
ADL: Reboot

Flashing done!
Total flash time : 00:00:12
Reboot phone now...

Reading Phone Info....
Connected phone - Nokia 6700 classic
Software Info: V 13.10 16-06-10 RM-470 (c) Nokia
IMEI: 12345610654321?
PPM version : V 13.10 16-06-10 RM-470 (c) Nokia I
Product code:
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
FullFactorySet...OK!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Product code update...
Checking User Certificates...
Total - 34 certs
Data exist, skip certificate repair...
Set phone to Normal mode...
AfterFlash operations done...
Done!

Elapsed: 00:00:40
Connect phone on selected interface...

UFS S/N 79236 boot - Ok

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Reading Phone Info....
Connected phone - Nokia 6700 classic
Software ver : V 13.10 16-06-10 RM-470 (c) Nokia
IMEI : 12345610654321?
Ape Ver :
APE Var :
APE ADSP:
DSP Ver : ICPR81_10w09
APE Test:
PPM : V 13.10
16-06-10
RM-470
(c) Nokia
I
CNT : Content: i_ru_chrome
V 13.10
16-06-10
RM-470
(c) Nokia
Product SN : 0
Product code :
Base Prd.code:
Module code :
Long Prod.SN : 0
Hardware info=======
HWID :
Retu : 34
Tahvo : 00
Batery: 4810 mV
Camera:
CMT BT: 410B-v190
APE BT:
APE HW:
LCDVer: TPO
RF ic : |Vapaus_5.1 | Aura_?.?
Lock info ===========
IMEI : 12345610654321?
IMEI spNet :
IMEI svNet :

Unable to read Lock table... :(
User Code : 12345
MMC pwd : no any record found
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery]

Done!

Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
SimLock Data found!
SimLock key found!
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000030000022600010007600C192102011104
CMT EM0 ID : 00000C34
CMT EM1 ID : 00000C30
CMT PUB ID : 2890000BE36103447741E4B94D13296882852B2F
CMT MODE ID : 00
CMT R_HASH : 25B977A055BE9B5DEC0C38A2A279C695
CMT ROM ID : 3E273BF637BE26FA

CMT : Sending 2nd loader...
Use : RAPUv11_2nd.fg , Rev : 0.0 Ver : 1.37.1
CMT Loader sent, Boot Ok
MCU Configuration
FLASHID : 004000EC , CMT , NAND
CMT Flash ID : 004000EC < SAMSUNG [SEC] => KAT00F00RA [NAND]
FLCNT : 00030000000000000000000000000000000000
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAPUv11_algo_xsr16.fg , Rev : 0.0 Ver : 1.40.0
CMT Algo sent
CMT PAPUB : BA40E42B6F3B8A6EFEE35B4A9D15924EB132C68900
Transmission mode : Dual (Ddr, TX2)

Boot Done!

Preparing for write certificates...

Switching to CMT...

CMT : NPC erase Ok
Writing NPC... Ok

CMT : CCC erase Ok
Writing CCC... Ok

CMT : HWC erase Ok
Writing HWC... Ok

Init Service mode... Wait...

Check phone mode...
Phone in Local mode
Seting Test mode... wait...
Test mode set

Writing SimLock Key... Ok!
Writing SimLock Data... Ok!

SDD Key status : SDData Damaged!!!!! :(
SimLock status : SimLock is Ok
Security status : Security is Ok

Done!

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Checking StartUp data ...
-----------------------
SDD Key status : SDData Damaged!!!!! :(
SimLock status : SimLock is Ok
Security status : Security is Ok
-----------------------

PA_SimLock Version :
PA_SL3 phone detected

Done!

Repair SD procedure started...

Phone Imei: 358238038930412
Key file exists, no need to read...
Operating mode is OK, no need change...
Writing Super Dongle Key... Ok
Done!

Checking StartUp data ...
-----------------------
SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!! :(
-----------------------

PA_SimLock Version :
PA_SL3 phone detected

Done!

Local SX4 procedure started...

Phone Imei: 358238038930412
Use custom key...
Step 1...
Step 2...
Step 3...
SX4 Auth - Ok
Done!

Uploading RF/Battery tune to phone...
Using : RM-470.pm
Operating mode is OK, no need change...

Field 1
Record 0 write - Ok
Record 2 write - Ok
Record 4 write - Ok
Record 6 write - Ok
Record 7 write - Ok
Record 8 write - Ok
Record 13 write - Ok
Record 16 write - Ok
Record 18 write - Ok
Record 20 write - Ok
Record 22 write - Ok
Record 23 write - Ok
Record 24 write - Ok
Record 26 write - Ok
Record 28 write - Ok
Record 29 write - Ok
Record 31 write - Ok
Record 33 write - Ok
Record 34 write - Ok
Record 35 write - Ok
Record 37 write - Ok
Record 39 write - Ok
Record 40 write - Ok
Record 41 write - Ok
Record 42 write - Ok
Record 43 write - Ok
Record 44 write - Ok
Record 45 write - Ok
Record 46 write - Ok
Field 2
Record 0 write - Ok
Field 309
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 3 write - Ok
Record 4 write - Ok
Record 5 write - Ok
Record 7 write - Ok
Record 17 write - Ok

Check ST_SECURITY now...
Security status : ST_SECURITY => OK

Done!

Elapsed: 00:00:02

Operating mode is OK, no need change...

Field 1
Record 0 write - Ok
Record 2 write - Ok
Record 4 write - Ok
Record 6 write - Ok
Record 7 write - Ok
Record 8 write - Ok
Record 13 write - Ok
Record 16 write - Ok
Record 18 write - Ok
Record 20 write - Ok
Record 22 write - Ok
Record 23 write - Ok
Record 24 write - Ok
Record 26 write - Ok
Record 28 write - Ok
Record 29 write - Ok
Record 31 write - Ok
Record 33 write - Ok
Record 34 write - Ok
Record 35 write - Ok
Record 37 write - Ok
Record 39 write - Ok
Record 40 write - Ok
Record 41 write - Ok
Record 42 write - Ok
Record 43 write - Ok
Record 44 write - Ok
Record 45 write - Ok
Record 46 write - Ok
Field 2
Record 0 write - Ok
Field 4
Record 1 write - Ok
Record 3 write - Ok
Record 4 write - Ok
Record 5 write - Ok
Record 8 write - Ok
Record 9 write - Ok
Record 18 write - Ok
Record 19 write - Ok
Record 28 write - Ok
Field 8
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 3 write - Ok
Record 4 write - Ok
Record 7 write - Ok
Record 8 write - Ok
Record 9 write - Ok
Record 10 write - Ok
Record 11 write - Ok
Record 12 write - Ok
Field 11
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 3 write - Ok
Record 4 write - Ok
Record 5 write - Ok
Record 6 write - Ok
Record 7 write - Ok
Record 8 write - Ok
Record 9 write - Ok
Record 10 write - Ok
Record 11 write - Ok
Record 12 write - Ok
Record 13 write - Ok
Record 14 write - Ok
Record 15 write - Ok
Record 16 write - Ok
Record 17 write - Ok
Record 18 write - Ok
Record 19 write - Ok
Record 20 write - Ok
Record 21 write - Ok
Record 22 write - Ok
Record 23 write - Ok
Record 24 write - Ok
Record 25 write - Ok
Record 26 write - Ok
Record 27 write - Ok
Record 28 write - Ok
Record 29 write - Ok
Record 30 write - Ok
Record 31 write - Ok
Record 32 write - Ok
Record 33 write - Ok
Record 34 write - Ok
Record 35 write - Ok
Record 36 write - Ok
Record 37 write - Ok
Record 38 write - Ok
Record 39 write - Ok
Record 40 write - Ok
Record 41 write - Ok
Record 42 write - Ok
Record 43 write - Ok
Record 44 write - Ok
Record 45 write - Ok
Record 46 write - Ok
Record 47 write - Ok
Record 48 write - Ok
Record 49 write - Ok
Record 50 write - Ok
Record 51 write - Ok
Record 52 write - Ok
Record 53 write - Ok
Record 54 write - Ok
Record 55 write - Ok
Record 56 write - Ok
Record 57 write - Ok
Record 58 write - Ok
Record 59 write - Ok
Record 60 write - Ok
Record 61 write - Ok
Record 62 write - Ok
Record 63 write - Ok
Record 64 write - Ok
Record 65 write - Ok
Record 66 write - Ok
Record 67 write - Ok
Record 68 write - Ok
Field 12
Record 0 write - Ok
Field 13
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 3 write - Ok
Record 4 write - Ok
Record 5 write - Ok
Record 6 write - Ok
Record 7 write - Ok
Record 8 write - Ok
Record 9 write - Ok
Record 10 write - Ok
Record 11 write - Ok
Record 12 write - Ok
Record 13 write - Ok
Record 14 write - Ok
Record 15 write - Ok
Record 16 write - Ok
Record 17 write - Ok
Record 18 write - Ok
Record 19 write - Ok
Record 20 write - Ok
Record 21 write - Ok
Record 22 write - Ok
Record 23 write - Ok
Record 24 write - Ok
Record 25 write - Ok
Record 26 write - Ok
Record 27 write - Ok
Record 28 write - Ok
Record 29 write - Ok
Record 30 write - Ok
Record 31 write - Ok
Record 32 write - Ok
Record 33 write - Ok
Record 34 write - Ok
Record 35 write - Ok
Record 36 write - Ok
Record 37 write - Ok
Record 38 write - Ok
Record 39 write - Ok
Record 40 write - Ok
Record 41 write - Ok
Record 42 write - Ok
Record 43 write - Ok
Record 44 write - Ok
Record 45 write - Ok
Record 46 write - Ok
Record 47 write - Ok
Record 48 write - Ok
Record 49 write - Ok
Record 50 write - Ok
Record 51 write - Ok
Record 52 write - Ok
Record 53 write - Ok
Record 54 write - Ok
Record 55 write - Ok
Record 56 write - Ok
Record 57 write - Ok
Record 58 write - Ok
Record 59 write - Ok
Record 60 write - Ok
Record 61 write - Ok
Record 62 write - Ok
Record 63 write - Ok
Record 64 write - Ok
Record 65 write - Ok
Record 66 write - Ok
Record 67 write - Ok
Record 68 write - Ok
Record 69 write - Ok
Record 70 write - Ok
Record 71 write - Ok
Record 72 write - Ok
Record 73 write - Ok
Record 74 write - Ok
Record 75 write - Ok
Record 76 write - Ok
Record 77 write - Ok
Record 78 write - Ok
Record 79 write - Ok
Record 80 write - Ok
Record 81 write - Ok
Record 82 write - Ok
Record 83 write - Ok
Record 84 write - Ok
Record 85 write - Ok
Record 86 write - Ok
Record 87 write - Ok
Record 88 write - Ok
Record 89 write - Ok
Record 90 write - Ok
Record 91 write - Ok
Record 92 write - Ok
Record 93 write - Ok
Record 94 write - Ok
Record 95 write - Ok
Record 96 write - Ok
Record 97 write - Ok
Record 98 write - Ok
Record 99 write - Ok
Record 100 write - Ok
Record 101 write - Ok
Record 102 write - Ok
Record 103 write - Ok
Record 104 write - Ok
Record 105 write - Ok
Record 106 write - Ok
Record 107 write - Ok
Record 108 write - Ok
Record 109 write - Ok
Record 110 write - Ok
Record 111 write - Ok
Record 112 write - Ok
Record 113 write - Ok
Record 114 write - Ok
Record 115 write - Ok
Record 116 write - Ok
Record 117 write - Ok
Record 118 write - Ok
Record 119 write - Ok
Record 120 write - Ok
Record 121 write - Ok
Record 122 write - Ok
Record 123 write - Ok
Record 124 write - Ok
Record 125 write - Ok
Record 126 write - Ok
Record 127 write - Ok
Record 128 write - Ok
Record 129 write - Ok
Record 130 write - Ok
Record 131 write - Ok
Record 132 write - Ok
Record 133 write - Ok
Record 134 write - Ok
Record 135 write - Ok
Record 136 write - Ok
Record 137 write - Ok
Record 138 write - Ok
Record 139 write - Ok
Record 140 write - Ok
Record 141 write - Ok
Record 142 write - Ok
Record 143 write - Ok
Record 144 write - Ok
Record 145 write - Ok
Record 146 write - Ok
Record 147 write - Ok
Record 148 write - Ok
Record 149 write - Ok
Record 150 write - Ok
Record 151 write - Ok
Record 152 write - Ok
Record 153 write - Ok
Record 154 write - Ok
Record 155 write - Ok
Record 156 write - Ok
Record 157 write - Ok
Record 158 write - Ok
Record 159 write - Ok
Record 160 write - Ok
Record 161 write - Ok
Record 162 write - Ok
Record 163 write - Ok
Record 164 write - Ok
Record 165 write - Ok
Record 166 write - Ok
Field 31
Record 4 write - Ok
Field 42
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 3 write - Ok
Record 4 write - Ok
Record 5 write - Ok
Record 6 write - Ok
Record 7 write - Ok
Record 8 write - Ok
Record 9 write - Ok
Record 10 write - Ok
Record 11 write - Ok
Record 12 write - Ok
Record 13 write - Ok
Record 14 write - Ok
Record 15 write - Ok
Record 16 write - Ok
Record 17 write - Ok
Record 18 write - Ok
Record 19 write - Ok
Record 20 write - Ok
Record 21 write - Ok
Record 22 write - Ok
Record 23 write - Ok
Record 24 write - Ok
Record 25 write - Ok
Record 26 write - Ok
Field 44
Record 0 write - Ok
Field 50
Record 0 write - Ok
Field 54
Record 0 write - Ok
Field 88
Record 0 write - Ok
Field 96
Record 0 write - Ok
Record 1 write - Ok
Field 107
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 3 write - Ok
Record 25 write - Ok
Record 26 write - Ok
Field 116
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 3 write - Ok
Record 4 write - Ok
Record 5 write - Ok
Record 6 write - Ok
Record 7 write - Ok
Record 8 write - Ok
Record 9 write - Ok
Record 10 write - Ok
Record 11 write - Ok
Record 12 write - Ok
Record 13 write - Ok
Record 14 write - Ok
Record 15 write - Ok
Record 16 write - Ok
Field 193
Record 2 write - Ok
Record 3 write - Ok
Record 4 write - Ok
Record 9 write - Ok
Field 218
Record 0 write - Ok
Field 232
Record 0 write - Ok
Record 2 write - Ok
Record 3 write - Ok
Field 238
Record 1 write - Ok
Field 250
Record 1 write - Ok
Record 2 write - Ok
Record 3 write - Ok
Record 4 write - Ok
Field 301
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 3 write - Ok
Record 4 write - Ok
Record 5 write - Ok
Record 6 write - Ok
Record 7 write - Ok
Record 8 write - Ok
Record 9 write - Ok
Record 10 write - Ok
Record 11 write - Ok
Record 12 write - Ok
Record 13 write - Ok
Record 14 write - Ok
Record 15 write - Ok
Record 16 write - Ok
Field 309
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 3 write - Ok
Record 4 write - Ok
Record 5 write - Ok
Record 7 write - Ok
Record 17 write - Ok
Field 320
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 3 write - Ok
Record 4 write - Ok
Record 5 write - Ok
Record 6 write - Ok
Record 7 write - Ok
Record 8 write - Ok
Record 9 write - Ok
Record 10 write - Ok
Record 11 write - Ok
Record 12 write - Ok
Record 13 write - Ok
Record 14 write - Ok
Record 15 write - Ok
Record 16 write - Ok
Record 17 write - Ok
Record 18 write - Ok
Record 19 write - Ok
Record 20 write - Ok
Record 21 write - Ok
Record 22 write - Ok
Record 23 write - Ok
Record 24 write - Ok
Record 25 write - Ok
Record 26 write - Ok
Record 27 write - Ok
Record 28 write - Ok
Record 29 write - Ok
Record 30 write - Ok
Record 31 write - Ok
Record 32 write - Ok
Record 33 write - Ok
Record 34 write - Ok
Record 35 write - Ok
Record 36 write - Ok
Record 37 write - Ok
Record 38 write - Ok
Field 322
Record 0 write - Ok
Field 341
Record 0 write - Ok
Record 3 write - Ok
Record 4 write - Ok
Field 354
Record 0 write - Ok
Field 355
Record 0 write - Ok
Field 356
Record 0 write - Ok
Record 1 write - Ok
Field 362
Record 0 write - Ok
Record 1 write - Ok
Field 364
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 3 write - Ok
Record 4 write - Ok
Record 5 write - Ok
Record 6 write - Ok
Record 7 write - Ok
Record 8 write - Ok
Record 9 write - Ok
Record 10 write - Ok
Record 11 write - Ok
Record 12 write - Ok
Record 13 write - Ok
Record 14 write - Ok
Record 15 write - Ok
Record 16 write - Ok
Record 17 write - Ok
Record 18 write - Ok
Record 19 write - Ok
Record 20 write - Ok
Record 21 write - Ok
Record 22 write - Ok
Record 23 write - Ok
Record 24 write - Ok
Record 25 write - Ok
Record 26 write - Ok
Field 365
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 3 write - Ok
Record 4 write - Ok
Record 5 write - Ok
Record 6 write - Ok
Record 7 write - Ok
Record 8 write - Ok
Record 9 write - Ok
Record 10 write - Ok
Record 11 write - Ok
Record 12 write - Ok
Record 13 write - Ok
Record 14 write - Ok
Record 15 write - Ok
Record 16 write - Ok
Field 369
Record 0 write - Ok

Done!

Elapsed: 00:00:18

Checking Camera Configuration...
Operating mode is OK, no need change...

CAM1 HW : ISL2TI020000093E2F30
CAM1 SW ver : XXXXXX [ SW damaged ]
Updating Camera #1 Configuration...
Upload done, checking...
CAM1 SW ver : 001006
Configuration Ok!

Secondary Camera #2 configuration info not exist

Done!

Phone disconected!

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Checking StartUp data ...
-----------------------
SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security is Ok
-----------------------

PA_SimLock Version :
PA_SL3 phone detected

Done!

Yutex

22.04.2011, 15:13

да один раз
Yutex, пробовали один раз? лог странный очень.

fomen

25.04.2011, 09:30

Best версия 1.20 backup RPL по Fbus рабоает?

card found: S/N 10EA:0116
registered to:

Connect phone on selected interface...

UFS S/N 57751 boot - Ok

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Backup Certificates now...
CRT308 Backup Created... :)
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000030000022600010007600C192102011104
CMT EM0 ID : 00000C34
CMT EM1 ID : 00000C30
CMT PUB ID : 1CB001117B880344D6CDD0F833DA6C6932CDB174
CMT MODE ID : 00
CMT R_HASH : 25B977A055BE9B5DEC0C38A2A279C695
CMT ROM ID : 3E273BF637BE26FA

CMT : Sending 2nd loader...
Use : RAPUv11_2nd.fg , Rev : 0.0 Ver : 1.37.1
CMT Loader sent, Boot Ok
MCU Configuration
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAPUv11_algo_xsr16.fg , Rev : 0.0 Ver : 1.40.0
CMT Algo sent
PAPUBkeys blank (erased or HW failure)
Transmission mode : Dual (Ddr, TX2)

Boot Done!

CMT : Read NPC certificate...
Cert size : 0 byte(s)
CMT : Read CCC certificate...
Cert size : 0 byte(s)
CMT : Read HWC certificate...
Cert size : 0 byte(s)
CMT : Read VARIANT certificate...
Cert size : 0 byte(s)
No any CRT data (MCU damaged/CERT erased), skip saving

SimLock Data saved...
SimLock Key saved...
WMDRM_PD Data saved...

RPL saved : c:\InfinityBox\BEST\Backup\Cert\353790043878858_SI M.rpl
По USB вроде делает, на MX Key ни по USB ни по Fbus не получилось
Phone found!
Series 40 Device detected!
read info... - Ok

Reading Phone Info....
Connected phone - Nokia 6700 classic
Software ver : V 13.10 16-06-10 RM-470 (c) Nokia
IMEI : 353790043878858
Ape Ver :
APE Var :
APE ADSP:
DSP Ver : ICPR81_10w09
APE Test:
PPM : V 13.10 16-06-10 RM-470 (c) Nokia CIC
CNT : Content: cic_a _illuvial V 13.10 16-06-10 RM-470 (c) Nokia
Product SN : KIU686560
Product code : 0588904
Base Prd.code: 0590482
Module code : 0204199
Long Prod.SN : 0
Hardware info=======
HWID : 1010
Retu : 34
Tahvo : 00
Batery: 4079 mV
Camera:
CMT BT: 410B-v190
APE BT:
APE HW:
LCDVer: TPO
RF ic :
Lock info ===========
IMEI : 353790043878858
IMEI spNet : 3A 35 97 00 34 78 88 05
IMEI svNet : 33 35 97 00 34 78 88 45 F6

Conf key : 8000000000000002
Provider key : 2440700000000000
Provider : AT&T;U.S.A. (3650)
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 7

LOCK STATUS :
=============================
BLK : 1
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS : All Open
=============================
CRT308 Backup Created... :)

User Code : 12345
MMC pwd : no any record found
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery]

Done!

Checking StartUp data ...
-----------------------
SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security is Ok
-----------------------

PA_SimLock Version :
PA_SL3 phone detected

Done!

Backup Certificates now...
Backup CRT308 data...
CRT308 Backup Created... :)
Check communication with phone....
Reboot....
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000030000022600010007600C192102011104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00000C34
EM1 ID: 00000C30
PUBLIC ID: 1CB001117B880344D6CDD0F833DA6C6932CDB174
ASIC MODE ID: 00
ROOT KEY HASH: 25B977A055BE9B5DEC0C38A2A279C695
ROM ID: 3E273BF637BE26FA
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 11.10.0
Processing RAWLOADER...
FLIC : 00400098
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 11.10.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:08
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
ADL: Reading certificates...

Reading NPC certificate...
IMEI : 353790043878858
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Cert Read done!

ADL: Reading certificates done! :)
ADL: Close_Session
Content: 000300000000000000000000000000
ADL: Reboot

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
SimLock Data saved...
SimLock Key saved...
WMDRM_PD Data saved...

RPL saved : c:\InfinityBox\BEST\Backup\Cert\353790043878858.rp l

All done, Disconnecting

Если я теперь сделаю erase, то потом этим backup RPL без проблем восстановлю телефон. Я правильно понимаю?

И еще вчера приносили C6-00 с кодом телефона, никак его не получалось вогнать в тест локал через Read RPL. Вогнал только когда попробовал шить в режиме Dead, с галочкой backup.
Вопрос: код телефона не считывается, его как то можно снять с сохранением данных, или только Full factory спасает?

JayDi

25.04.2011, 11:53

fomen, если внимательно глянуть логи - то в 6700 новая флэшка, которая не поддерживает старый протокол. Использовать джаф или , как Вы сделали - USB.
Поднять да, можно, останется потом сделать Repair SD, BEST поддерживает данные телефоны для репайра.

по C6 - в важных темах все доступно объяснил по режимам и процессорам - прочтите, плиз.
Данные - пока нет вариантов, но скоро сделаем что-нибудь, сейчас куча других, не менее важных вещей в работе.

DrManila

26.04.2011, 11:18

E55 RM-482 RPL :(

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
SimLock Data found!
SimLock key found!
SuperDongle Key found!
CMLA key found!
WMDRM key found!
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000030000022600010007600C192102011104
CMT EM0 ID : 00001040
CMT EM1 ID : 00001030
CMT PUB ID : 08E0001573690344B1B231C7E1C0415246450228
CMT MODE ID : 00
CMT R_HASH : 25B977A055BE9B5DEC0C38A2A279C695
CMT ROM ID : 3E273BF637BE26FA

CMT : Sending 2nd loader...
Use : RAPUv11_2nd.fg , Rev : 0.0 Ver : 1.37.1
CMT Loader sent, Boot Ok
MCU Configuration
FLASHID : 00400020 , CMT , NOR
CMT Flash ID : 00400020 < ST => M39BORBOAD
FLCNT : 00000049010000000200611004000E00A80700
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAPUv11_algo_xsr16.fg , Rev : 0.0 Ver : 1.40.0
CMT Algo sent
PAPUBkeys blank (erased or HW failure)
Transmission mode : Dual (Ddr, TX2)

Boot Done!

Preparing for write certificates...

Switching to CMT...

CMT : NPC erase Ok
Programming report : Error NPC
Programming report : Error NPC
Writing NPC... Ok

CMT : CCC erase Ok
Programming report : Error CCC
Programming report : Error CCC
Writing CCC... Ok

CMT : HWC erase Ok
Programming report : Error HWC
Programming report : Error HWC
Writing HWC... Ok

Init Service mode... Wait...

Check phone mode...
Phone in Local mode
Seting Test mode... wait...
Test mode set

Writing SimLock Key... Error!
Writing SimLock Data... Error!
Writing Super Dongle Key... Ok

SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!! :(

Done!

JayDi

26.04.2011, 13:14

а USB для него отменили?

DrManila

26.04.2011, 14:09

JayDi, нет, я лишь указал что интерфейс UFS'а в данном случае не работает.

PANsoft

26.04.2011, 14:49

JayDi, нет, я лишь указал что интерфейс UFS'а в данном случае не работает.

какая версия беста то хоть?

DrManila

26.04.2011, 14:54

PANsoft, последняя, 1,20.

JayDi

26.04.2011, 15:43

FLASHID : 00400020 , CMT , NOR
CMT Flash ID : 00400020 < ST => M39BORBOAD
FLCNT : 00000049010000000200611004000E00A80700
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAPUv11_algo_xsr16.fg , Rev : 0.0 Ver : 1.40.0
CMT Algo sent
PAPUBkeys blank (erased or HW failure)
CMT Flash ID : 00400020 < ST => M39BORBOAD
PAPUBkeys blank (erased or HW failure)

Эти два момента -
1. Новая флэшь, которая не поддерживается OLd-загрузчиками
2. Алгоритм не инициализировался на запись, чтение, хотя и запустился внутри тела, но не понимает, куда он попал по причине номер 1.

estonij

29.04.2011, 12:41

Не смог анлокнуть E75
Unlock procedure started...

Phone Imei: 35955xxxxxxxxx
Checking locks...
Conf key : 8000000000000000
Provider key : 2441200058992580
Provider : Finnet Networks Ltd.;Finland
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 2

LOCK STATUS :
=============================
BLK : 1
Lock1:Close Lock2:Close
BLK : 2
Lock1:Close Lock2:Close
=============================
LOCKS : Closed
=============================
PA_SL2 phone detected...
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000010000022600010006400C192101031103
CMT EM0 ID : 00000295
CMT EM1 ID : 00000B22
CMT PUB ID : 20000106A47B0052F1D681EA264D070873D63205
CMT MODE ID : 00
CMT R_HASH : CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT ROM ID : 4B9B75103E691FF8

CMT : Sending 2nd loader...
CMT Loader sent, Boot Ok
rap= 20000106A47B0052F1D681EA264D070873D63205
hash= CAEEBB65D3C48E6DC73B49DC5063A2EE
key= B603CB568DBDF24E2977A2CCD9E602E1AD4C3EB4
Init Service mode... Wait...

Key file updated...
Unlock Error!

JayDi

29.04.2011, 12:45

"Repair SL" просто нажмите.

estonij

29.04.2011, 17:05

Ну откуда же мне об этом знать, если есть кнопка Unlock SL1 SL2. Телефон SL2. Недороботочка :)

JayDi

29.04.2011, 17:58

Не, просто неохота тратить время на то, что и так работает, правда чуток иначе, пару недель. Лучше использовать это время на другое.
Кстати уже писалось об этом ранее. Хотя, просто добавим опцию автоматом или вывод в лог.

estonij

30.04.2011, 11:20

Переделывать не нужно, просто в логе, хотелось бы, после Error видеть подсказку Use то-то.

JayDi

01.05.2011, 14:59

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Processing Server SX4 Auth
Checking SDD key...
Check SD : Key is Ok
Connecting to server...
Connect to server Ok, checking
SX4 Server : Online, Ready
SX4, processing Step #1
SX4, processing Step #2
SX4, processing Step #3
SX4 Result : Ok

Отдельное спасибо комраду Kihmet за тесты :)

komayo

05.05.2011, 08:23

Не могу восстановить имей, 6700 RM-470, RPL заказан, когда ввожу
Writing SimLock Key... Error!
Writing SimLock Data... Error!
Writing Super Dongle Key... Error

эти зоны ошибку выдают!
Вот полный лог:
log info
Reading Phone Info....
Connected phone - Nokia 6700 classic
Software ver : V 13.10 16-06-10 RM-470 (c) Nokia
IMEI : 12345610654321?
Ape Ver :
APE Var :
APE ADSP:
DSP Ver : ICPR81_10w09
APE Test:
PPM : V 13.10
16-06-10
RM-470
(c) Nokia
CIB
CNT : Content: cib_tj_bronze
V 13.10
16-06-10
RM-470
(c) Nokia
Product SN : 0
Product code :
Base Prd.code:
Module code :
Long Prod.SN : 0
Hardware info=======
HWID :
Retu : 34
Tahvo : 00
Batery: 4711 mV
Camera:
CMT BT: 410B-v190
APE BT:
APE HW:
LCDVer: TPO
RF ic : |Vapaus_5.1 | Aura_?.?
Lock info ===========
IMEI : 12345610654321?
IMEI spNet :
IMEI svNet :

Unable to read Lock table... :(
User code : Crypted
MMC pwd : no any record found
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery]

Done!

log chek:
Read and Check phone data...
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!! :(
SDD Key status : SD Data is Ok

PA_SimLock Version :
PA_SL phone detected

Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000030000022600010007600C192102011104
CMT EM0 ID : 00000C34
CMT EM1 ID : 00000C30
CMT PUB ID : 12C0000EDB61034401A300C172D0903DA6A3D124
CMT MODE ID : 00
CMT R_HASH : 25B977A055BE9B5DEC0C38A2A279C695
CMT ROM ID : 3E273BF637BE26FA

CMT : Sending 2nd loader...
Use : RAPUv11_2nd.fg , Rev : 0.0 Ver : 1.37.1
CMT Loader sent, Boot Ok
MCU Configuration
FLASHID : 004000EC , CMT , NAND
CMT Flash ID : 004000EC < SAMSUNG [SEC] => KAT00F00RA [NAND]
FLCNT : 00030000000000000000000000000000000000
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAPUv11_algo_xsr16.fg , Rev : 0.0 Ver : 1.40.0
CMT Algo sent
PAPUBkeys blank (erased or HW failure)
Transmission mode : Dual (Ddr, TX2)

Boot Done!

Init Service mode... Wait...

Connect phone on selected interface...

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

log Write RPL:

Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
SimLock Data found!
SimLock key found!
SuperDongle Key found!
CMLA key found!
WMDRM key found!
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000030000022600010007600C192102011104
CMT EM0 ID : 00000C34
CMT EM1 ID : 00000C30
CMT PUB ID : 12C0000EDB61034401A300C172D0903DA6A3D124
CMT MODE ID : 00
CMT R_HASH : 25B977A055BE9B5DEC0C38A2A279C695
CMT ROM ID : 3E273BF637BE26FA

CMT : Sending 2nd loader...
Use : RAPUv11_2nd.fg , Rev : 0.0 Ver : 1.37.1
CMT Loader sent, Boot Ok
MCU Configuration
FLASHID : 004000EC , CMT , NAND
CMT Flash ID : 004000EC < SAMSUNG [SEC] => KAT00F00RA [NAND]
FLCNT : 00030000000000000000000000000000000000
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAPUv11_algo_xsr16.fg , Rev : 0.0 Ver : 1.40.0
CMT Algo sent
PAPUBkeys blank (erased or HW failure)
Transmission mode : Dual (Ddr, TX2)

Boot Done!

Preparing for write certificates...

Switching to CMT...

CMT : NPC erase Ok
Writing NPC... Ok

CMT : CCC erase Ok
Writing CCC... Ok

CMT : HWC erase Ok
Writing HWC... Ok

Init Service mode... Wait...

Check phone mode...
Phone in Local mode
Seting Test mode... wait...
Test mode set

Writing SimLock Key... Error!
Writing SimLock Data... Error!
Writing Super Dongle Key... Error

SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!! :(

Done!

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Добавляю аск который считал с этого же тела и РПЛ который сделали, если надо!
Что посоветуйте?

bmw

05.05.2011, 10:20

Что посоветуйте?Кажется мне, что вы это делаете через уфс?
По юсб надо. Жмёте "Записать РПЛ" и втыкаете в выключенный телефон кабель, если не стартанёт, то жмёте кнопку включения.
После записи рпл, через UFS сделать Repair SDD и с птичкой Use Custom Key делаете SX4 и потом Upload Tune.

komayo

05.05.2011, 12:43

(((((((
сделал все как вы сказали но результат ноль :kos:
card found: S/N ********
registered to: komyor

Connect phone on selected interface...

Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
SimLock Data found!
SimLock key found!
SuperDongle Key found!
CMLA key found!
WMDRM key found!
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000030000022600010007600C192102011104
EM0 ID: 00000C34
EM1 ID: 00000C30
PUBLIC ID: 12C0000EDB61034401A300C172D0903DA6A3D124
ASIC MODE ID: 00
ROOT KEY HASH: 25B977A055BE9B5DEC0C38A2A279C695
ROM ID: 3E273BF637BE26FA
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 11.4.0
Processing RAWLOADER...
FLIC : 004000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 11.4.0
Boot Done! :)
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
ADL: Preparing for write certificates...

Erase NPC... Ok
Writing NPC... Ok
Erase CCC... Ok
Writing CCC... Ok
Erase HWC... Ok
Writing HWC... Ok

ADL: Writing Flash certs done! :)

ADL: Close_Session
Content: 000300000000000000000000000000
ADL: Reboot
Wait, reconneting...
Check phone mode...
Phone already in Test mode, skip change...

Writing SimLock Key... Error!
Writing SimLock Data... Error!
Writing Super Dongle Key... Error

SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!! :(

CMLA key sent... Ok
WMDRM_PD key sent... Ok

Done!

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Phone disconected!

Connect phone on selected interface...

UFS S/N 38442 boot - Ok

Connect phone on selected interface...

Read and Check phone data...
BB5 bus checking...
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000030000022600010007600C192102011104
CMT EM0 ID : 00000C34
CMT EM1 ID : 00000C30
CMT PUB ID : 12C0000EDB61034401A300C172D0903DA6A3D124
CMT MODE ID : 00
CMT R_HASH : 25B977A055BE9B5DEC0C38A2A279C695
CMT ROM ID : 3E273BF637BE26FA

CMT : Sending 2nd loader...
Use : RAPUv11_2nd.fg , Rev : 0.0 Ver : 1.37.1
Error : 2nd boot not accepted
RX : 0100000000B172000000

Phone found!
Series 40 Device detected!
read info... - Ok

Repair SD procedure started...

Phone Imei: 12345610654321?
Key file exists, no need to read...
Operating mode is OK, no need change...
Writing Super Dongle Key... Ok
Done!

Phone disconected!

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Repair SD procedure started...

Phone Imei: 12345610654321?
Key file exists, no need to read...
Operating mode is OK, no need change...
Writing Super Dongle Key... Ok
Done!

Local SX4 procedure started...

Phone Imei: 12345610654321?
Use custom key...
Step 1...
Step 2...
Step 3...
SX4 Auth - Ok
Done!

Uploading RF/Battery tune to phone...
Using : RM-470.pm
Operating mode is OK, no need change...

Field 1
Record 0 write - Ok
Record 2 write - Ok
Record 4 write - Ok
Record 6 write - Ok
Record 7 write - Ok
Record 8 write - Ok
Record 13 write - Ok
Record 16 write - Ok
Record 18 write - Ok
Record 20 write - Ok
Record 22 write - Ok
Record 23 write - Ok
Record 24 write - Ok
Record 26 write - Ok
Record 28 write - Ok
Record 29 write - Ok
Record 31 write - Ok
Record 33 write - Ok
Record 34 write - Ok
Record 35 write - Ok
Record 37 write - Ok
Record 39 write - Ok
Record 40 write - Ok
Record 41 write - Ok
Record 42 write - Ok
Record 43 write - Ok
Record 44 write - Ok
Record 45 write - Ok
Record 46 write - Ok
Field 2
Record 0 write - Ok
Field 309
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 3 write - Ok
Record 4 write - Ok
Record 5 write - Ok
Record 7 write - Ok
Record 17 write - Ok

Check ST_SECURITY now...
Security status : ST_SECURITY => DAMAGED :(

Done!

Elapsed: 00:00:16

Phone disconected!

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Reading Phone Info....
Connected phone - Nokia 6700 classic
Software ver : V 13.10 16-06-10 RM-470 (c) Nokia
IMEI : 12345610654321?
Ape Ver :
APE Var :
APE ADSP:
DSP Ver : ICPR81_10w09
APE Test:
PPM : V 13.10
16-06-10
RM-470
(c) Nokia
CIB
CNT : Content: cib_tj_bronze
V 13.10
16-06-10
RM-470
(c) Nokia
Product SN : 0
Product code :
Base Prd.code:
Module code :
Long Prod.SN : 0
Hardware info=======
HWID :
Retu : 34
Tahvo : 00
Batery: 4405 mV
Camera:
CMT BT: 410B-v190
APE BT:
APE HW:
LCDVer: TPO
RF ic : |Vapaus_5.1 | Aura_?.?
Lock info ===========
IMEI : 12345610654321?
IMEI spNet :
IMEI svNet :

Unable to read Lock table... :(
User code : Crypted
MMC pwd : no any record found
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery]

Done!

DrManila

05.05.2011, 12:52

Ну давайте обсуждать как восстанавливать Nokia BB5 программно... Стирать пробовали свой 6700с?

komayo

05.05.2011, 13:16

Ну давайте обсуждать как восстанавливать Nokia BB5 программно... Стирать пробовали свой 6700с?

1) стирание (Erase Flash):
card found: S/N ********
registered to: komyor

Connect phone on selected interface...

UFS S/N 38442 boot - Ok

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

User ACCEPTED FULL ERASE
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000030000022600010007600C192102011104
CMT EM0 ID : 00000C34
CMT EM1 ID : 00000C30
CMT PUB ID : 12C0000EDB61034401A300C172D0903DA6A3D124
CMT MODE ID : 00
CMT R_HASH : 25B977A055BE9B5DEC0C38A2A279C695
CMT ROM ID : 3E273BF637BE26FA

CMT : Sending 2nd loader...
Use : RAPUv11_2nd.fg , Rev : 0.0 Ver : 1.37.1
CMT Loader sent, Boot Ok
MCU Configuration
FLASHID : 004000EC , CMT , NAND
CMT Flash ID : 004000EC < SAMSUNG [SEC] => KAT00F00RA [NAND]
FLCNT : 00030000000000000000000000000000000000
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAPUv11_algo_xsr16.fg , Rev : 0.0 Ver : 1.40.0
CMT Algo sent
PAPUBkeys blank (erased or HW failure)
Transmission mode : Dual (Ddr, TX2)

Boot Done!

Full Erase started...
Asic : CMT , Sub : NAND
Erase Area 0x00000000-0x0FFFFFFF
Erasing, wait.....
Erase CMT Finished , [FF]
CMT : Erase Ok
Done

Phone disconected!

2) Флеширование:
Core version : 1.18 , Rev : 3.0

Selected FlashSettings : Manual
Files Set for Flashing :
MCU : rm470__13.10.mcusw
PPM : rm470__13.10.ppm_cib
CNT : rm470__13.10_ISM_012.image_cib_tj_bronze
Check FlashFiles, Please, wait...
-> SWversion check skipped : Dead mode selected

Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000030000022600010007600C192102011104
CMT EM0 ID : 00000C34
CMT EM1 ID : 00000C30
CMT PUB ID : 12C0000EDB61034401A300C172D0903DA6A3D124
CMT MODE ID : 00
CMT R_HASH : 25B977A055BE9B5DEC0C38A2A279C695
CMT ROM ID : 3E273BF637BE26FA

CMT : Sending 2nd loader...
Use : RAPUv11_2nd.fg , Rev : 0.0 Ver : 1.37.1
CMT Loader sent, Boot Ok
MCU Configuration
FLASHID : 004000EC , CMT , NAND
CMT Flash ID : 004000EC < SAMSUNG [SEC] => KAT00F00RA [NAND]
FLCNT : 00030000000000000000000000000000000000
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAPUv11_algo_xsr16.fg , Rev : 0.0 Ver : 1.40.0
CMT Algo sent
PAPUBkeys blank (erased or HW failure)
Transmission mode : Dual (Ddr, TX2)

Boot Done!

Partitioning....
Partitioning Ok...
Transmission mode : Dual (Ddr, TX2)
Erase : Processing rm470__13.10.mcusw
Found 8 areas to erase, erase group
Asic : CMT , Sub : NAND
CMT , NAND , Area : 0x00020000 - 0x000203FF
CMT , NAND , Area : 0x00060000 - 0x0009FFFF
CMT , NAND , Area : 0x000A0000 - 0x0041FFFF
CMT , NAND , Area : 0x00420000 - 0x0069FFFF
CMT , NAND , Area : 0x006A0000 - 0x01F1FFFF
CMT , NAND , Area : 0x02900000 - 0x02FBFFFF
CMT , NAND , Area : 0x0F2C0000 - 0x0F8BFFFF
CMT , NAND , Area : 0x00000000 - 0x0001FFFF
Erasing, wait.....
CMT : Group erase Ok
Erase Partition 0x08 , CMT , NAND
CMT : Partition erase Ok
Erase Partition 0x0A , CMT , NAND
CMT : Partition erase Ok
Erase Partition 0x0B , CMT , NAND
CMT : Partition erase Ok
TIME : Erase time : 00:00:02
Transmission mode : Dual (Ddr, TX2)
Write : Processing rm470__13.10.mcusw
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [UPDAPP]
CMT: Writing Hash CERT [DSP0]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [MCUSW]
CMT: Writing Hash CERT [ISA+DYNSW]
Total writen 229 blocks
TIME : Write time : 00:02:21

Partitioning....
Partitioning Ok...
Transmission mode : Dual (Ddr, TX2)
Erase : Processing rm470__13.10.ppm_cib
Found 1 areas to erase, erase group
Asic : CMT , Sub : NAND
CMT , NAND , Area : 0x01F20000 - 0x028FFFFF
Erasing, wait.....
CMT : Group erase Ok
TIME : Erase time : 00:00:00
Transmission mode : Dual (Ddr, TX2)
Write : Processing rm470__13.10.ppm_cib
Total writen 48 blocks
TIME : Write time : 00:00:33

Partitioning....
Partitioning Ok...
Transmission mode : Dual (Ddr, TX2)
Erase : Processing rm470__13.10_ISM_012.image_cib_tj_bronze
Found 1 areas to erase, erase group
Asic : CMT , Sub : NAND
CMT , NAND , Area : 0x02FC0000 - 0x0F2BFFFF
Erasing, wait.....
CMT : Group erase Ok
Erase Partition 0x08 , CMT , NAND
CMT : Partition erase Ok
TIME : Erase time : 00:00:02
Transmission mode : Dual (Ddr, TX2)
Write : Processing rm470__13.10_ISM_012.image_cib_tj_bronze
Total writen 205 blocks
TIME : Write time : 00:02:22

Init Service mode... Wait...

Reading Phone Info....
Connected phone - Nokia 6700 classic
Software Info: V 13.10
16-06-10
RM-470
(c) Nokia
IMEI: 12345610654321?
Product code:
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Checking User Certificates...
Total - 34 certs
Data exist, skip certificate repair...
AfterFlash operations done... Reconnect, wait...
Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

3) запись РПЛ через УСБ :

Connect phone on selected interface...

Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
SimLock Data found!
SimLock key found!
SuperDongle Key found!
CMLA key found!
WMDRM key found!
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000030000022600010007600C192102011104
EM0 ID: 00000C34
EM1 ID: 00000C30
PUBLIC ID: 12C0000EDB61034401A300C172D0903DA6A3D124
ASIC MODE ID: 00
ROOT KEY HASH: 25B977A055BE9B5DEC0C38A2A279C695
ROM ID: 3E273BF637BE26FA
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 11.4.0
Processing RAWLOADER...
FLIC : 004000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 11.4.0
Boot Done! :)
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
ADL: Preparing for write certificates...

Erase NPC... Ok
Writing NPC... Ok
Erase CCC... Ok
Writing CCC... Ok
Erase HWC... Ok
Writing HWC... Ok

ADL: Writing Flash certs done! :)

ADL: Close_Session
Content: 000300000000000000000000000000
ADL: Reboot
Wait, reconneting...
Check phone mode...
Phone already in Test mode, skip change...

Writing SimLock Key... Error!
Writing SimLock Data... Error!
Writing Super Dongle Key... Error

SDD Key status : SDData Damaged!!!!! :(
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!! :(

CMLA key sent... Ok
WMDRM_PD key sent... Ok

Done!

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Нечего не изменяется!

Nics

05.05.2011, 14:11

SDD Key status : SDData Damaged!!!!! http://www.mcrf.ru/forum/images/smilies/frown.gif
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!! http://www.mcrf.ru/forum/images/smilies/frown.gif
Как не изменяется? На сей раз simlock в норме. Теперь
через UFS сделать Repair SDD и с птичкой Use Custom Key делаете SX4 и потом Upload Tune.

komayo

05.05.2011, 14:27

Как не изменяется? На сей раз simlock в норме. Теперь

вот полный лог после всех этих процедур:
card found: S/N *******
registered to: komyor

Connect phone on selected interface...

UFS S/N 38442 boot - Ok

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Reading Phone Info....
Connected phone - Nokia 6700 classic
Software ver : V 13.10 16-06-10 RM-470 (c) Nokia
IMEI : 12345610654321?
Ape Ver :
APE Var :
APE ADSP:
DSP Ver : ICPR81_10w09
APE Test:
PPM : V 13.10
16-06-10
RM-470
(c) Nokia
CIB
CNT : Content: cib_tj_bronze
V 13.10
16-06-10
RM-470
(c) Nokia
Product SN : 0
Product code :
Base Prd.code:
Module code :
Long Prod.SN : 0
Hardware info=======
HWID :
Retu : 34
Tahvo : 00
Batery: 4658 mV
Camera:
CMT BT: 410B-v190
APE BT:
APE HW:
LCDVer: TPO
RF ic : |Vapaus_5.1 | Aura_?.?
Lock info ===========
IMEI : 12345610654321?
IMEI spNet :
IMEI svNet :

Unable to read Lock table... :(
User code : Crypted
MMC pwd : no any record found
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery]

Done!

PS: Кто скажет по имею что за телефон :
356943038896396.ask
359327030378396.rpl

У меня подозрение на RPL!

NeOnyx

05.05.2011, 15:15

PS: Кто скажет по имею что за телефон :
356943038896396.ask
359327030378396.rpl

356943038896396.ask - 6700с [rm-470]
359327030378396.rpl - E52 [rm-469]

mixanik

05.05.2011, 15:42

356943038896396.ask - 6700с [rm-470]
359327030378396.rpl - E52 [rm-469]

похоже кто-то поменял пару в 6700, вот поэтому RPL и не подходит

NeOnyx

05.05.2011, 15:55

похоже кто-то поменял пару в 6700, вот поэтому RPL и не подходит

Вы сами поняли что сказали, как может быть что с заменённой пары считывается *.ask от 6700?))

komayo

05.05.2011, 15:56

похоже кто-то поменял пару в 6700, вот поэтому RPL и не подходит

Как на заменнёной паре вычитывается ask от 6700?
вот лог который я считал до изменении имея 12345, который я прошил его и считал аск :
это было 2.05.2011:
card found: S/N *******
registered to: komyor

Connect phone on selected interface...

Core version : 1.18 , Rev : 3.0

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm470__13.10.mcusw
PPM : rm470__13.10.ppm_cib
CNT : rm470__13.10_ISM_012.image_cib_tj_bronze
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000030000022600010007600C192102011104
EM0 ID: 00000C34
EM1 ID: 00000C30
PUBLIC ID: 12C0000EDB61034401A300C172D0903DA6A3D124
ASIC MODE ID: 00
ROOT KEY HASH: 25B977A055BE9B5DEC0C38A2A279C695
ROM ID: 3E273BF637BE26FA
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 11.4.0
Processing RAWLOADER...
FLIC : 004000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 11.4.0
Boot Done! :)
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
ADL: phone is in flash mode
===Flashing [MCU]===
Erase : Processing rm470__13.10.mcusw
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm470__13.10.mcusw
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [UPDAPP]
CMT: Writing Hash CERT [DSP0]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [MCUSW]
CMT: Writing Hash CERT [ISA+DYNSW]
Total writen 219 blocks
TIME : Write time : 00:00:04
MCU Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

===Flashing [PPM]===
Erase : Processing rm470__13.10.ppm_cib
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm470__13.10.ppm_cib
Total writen 48 blocks
TIME : Write time : 00:00:01
PPM Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

===Flashing [CNT]===
Erase : Processing rm470__13.10_ISM_012.image_cib_tj_bronze
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:02
Write : Processing rm470__13.10_ISM_012.image_cib_tj_bronze
Total writen 205 blocks
TIME : Write time : 00:00:03
CNT Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

ADL: Close_Session
Content: 000300000000000000000000000000
ADL: Reboot

Flashing done!
Total flash time : 00:00:12
Reboot phone now...

Reading Phone Info....
Connected phone - Nokia 6700 classic
Software Info: V 13.10 16-06-10 RM-470 (c) Nokia
IMEI: 356943038896396
PPM version : V 13.10 16-06-10 RM-470 (c) Nokia CIB
Product code: 0570896
Checking...
SimLock status : SimLock Damaged!!!!! :(
Security status : Security is Ok
Read Info Done!
Checking User Certificates...
Total - 34 certs
Data exist, skip certificate repair...
AfterFlash operations done... Reconnect, wait...
Done!

Elapsed: 00:00:32
Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Reading Phone Info....
Connected phone - Nokia 6700 classic
Software ver : V 13.10 16-06-10 RM-470 (c) Nokia
IMEI : 356943038896396
Ape Ver :
APE Var :
APE ADSP:
DSP Ver : ICPR81_10w09
APE Test:
PPM : V 13.10 16-06-10 RM-470 (c) Nokia CIB
CNT : Content: cib_tj_bron e V 13.10 16-06-10 RM-470 (c) Nokia
Product SN : 0
Product code : 0570896
Base Prd.code:
Module code :
Long Prod.SN : 0
Hardware info=======
HWID :
Retu : 34
Tahvo : 00
Batery: 3571 mV
Camera:
CMT BT: 410B-v190
APE BT:
APE HW:
LCDVer: TPO
RF ic :
Lock info ===========
IMEI : 356943038896396
IMEI spNet : 3A 65 49 03 83 98 36 09
IMEI svNet : 33 65 49 03 83 98 36 49 F6

Unable to read Lock table... :(
CRT308 Backup Created... :)

User Code : 12345
MMC pwd : no any record found
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery]

Done!

Reading ASK request file...
Saved to: C:\Documents and Settings\Admin\Рабочий стол\356943038896396.ask
Done!

Phone disconected!

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Phone disconected!

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Layder

05.05.2011, 16:18

komayo, Вы прописываете RPL под E52, не под ВАШ ask.
даже если он и пропишется с какого либо перепугу, то IMEI в любом случае останется 1234567 и далее по тексту.

komayo

05.05.2011, 16:23

komayo, Вы прописываете RPL под E52, не под ВАШ ask.
даже если он и пропишется с какого либо перепугу, то IMEI в любом случае останется 1234567 и далее по тексту.

Я и об этом
PS: телефон новый, только что вскрыл, нету на нем следов ремонта!

Layder

05.05.2011, 17:18

komayo, что Вы об этом?
Вы что не видите разницу, что ASK у Вас под один IMEI, а RPL под другой?

...и детский сад на страницу обсуждений.

Mumang

05.05.2011, 17:43

6500c по Fbus интерфейс Ufs глюки с записью контента, по Usb всё прошло нормально , логи ниже, телефон полностью работоспособен, контакты по Usb и Fun label залились нормально.

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000010000022600010006010C192101003000
CMT EM0 ID : 00000295
CMT EM1 ID : 00000B22
CMT PUB ID : 20C00004704A515087634114E4061E32ABB04EFF
CMT MODE ID : 00
CMT R_HASH : BAF3A9C3DBFA8454937DB77F2B8852B1
CMT ROM ID : 273F6D55DFAAF68F

CMT : Sending 2nd loader...
Use : RAP3Gv3_2nd.fg , Rev : 0.0 Ver : 10.42.0
CMT Loader sent, Boot Ok
MCU Configuration
FLASHID : 220C00EC , CMT , NOR
CMT Flash ID : 220C00EC < SAMSUNG [SEC] => K5G1257ATM
FLCNT : 00000000000000000000000000000000000000
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAP3Gv3_algo_xsr15.fg
CMT Algo sent
MMC Partitioning....
Partitioning Ok...
CMT PAPUB : D8948DEF333BF18141EF4C3D0FB1B002EB5D882C00
Transmission mode : Dual (Ddr, TX2)

Boot Done!

Transmission mode : Dual (Ddr, TX2)
Erase : Processing rm265__09.48_ISM_016.image_i_ru
Found 2 areas to erase, erase group
Asic : CMT , Sub : NOR
CMT , NOR , Area : 0x01EC0000 - 0x03F9FFFF
CMT , NOR , Area : 0x01BC0000 - 0x01EBFFFF
Using TimeOut : 7 min ( 430 sec )
Erasing, wait.....
CMT : Group erase Ok
TIME : Erase time : 00:01:40
Transmission mode : Dual (Ddr, TX2)
Write : Processing rm265__09.48_ISM_016.image_i_ru
Error write block at : 36
ERR : 000000000000000910000000
Error on Flashing Phone!
Error... :(
Ровно на середине из 72 блоков ошибка
Phone found!
Series 40 Device detected!
read info... - Ok

Core version : 1.20 , Rev : 4.0

Selected FlashSettings :
Check FlashFiles, Please, wait...

Files Set for Flashing :
CNT : rm265__09.48_ISM_016.image_i_ru
Flashing phone now...
Check files done...
-> SWversion check skipped : Custom mode selected
Getting product info...
RAP_BOOT: 0803000002010000
RAP_PUBLIC: 20C00004704A515087634114E4061E32ABB04EFF
CMT_ROOTKEY: BAF3A9C3DBFA8454937DB77F2B8852B1
RAP_PAPUBKEY: D0D8948DEF333BF18141EF4C3D0FB1B002EB5D88
Checking CNT sector PN<>FL
PN CNT sector : 128 kb
ConvertImage: Processing rm265__09.48_ISM_016.image_i_ru
ConvertImage: Page Size is 128K, no need convert
Loader len: 297344, CHK: F600
ADL -> Sending loader...
Update Server code succesfully sent to phone!
TIME : Boot time : 00:00:03
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
Waiting for response: 28
Waiting for response: 27
ADL -> [2nd] changing...
ADL Server confirm flashmode!
ADL : ASIC CMT select Ok
===Flashing [CNT]===
Erase : Processing rm265__09.48_ISM_016.image_i_ru
Found 2 areas to erase
Erasing area 0x01EC0000 - 0x03F9FFFF, NOR, CMT
Result: 0000
Erasing area 0x01BC0000 - 0x01EBFFFF, NOR, CMT
Result: 0000
TIME : Erase time : 00:01:43
Write : Processing rm265__09.48_ISM_016.image_i_ru
Total 72 [72/0/0] blocks to write, writing...
TIME : Write time : 00:01:01
CNT Write done
ADL : End flashing
По Usb всё в норме, файлы те же самые, просто полные логи с mcu и ppm не стал выкладывать ибо там всё нормально.
Шнур не прищепка, колодкой нормальный, попробовал и так и сяк и прищепкой ошибка одна и та же через Ufs.

komayo

06.05.2011, 10:29

Дело было в рпл-е. С первого раза все ок:

card found: S/N ********
registered to: komyor

Connect phone on selected interface...

UFS S/N 38442 boot - Ok

Connect phone on selected interface...

Connect phone on selected interface...

Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
SimLock Data found!
SimLock key found!
SuperDongle Key found!
WMDRM key found!
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000030000022600010007600C192102011104
EM0 ID: 00000C34
EM1 ID: 00000C30
PUBLIC ID: 12C0000EDB61034401A300C172D0903DA6A3D124
ASIC MODE ID: 00
ROOT KEY HASH: 25B977A055BE9B5DEC0C38A2A279C695
ROM ID: 3E273BF637BE26FA
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 11.4.0
Processing RAWLOADER...
FLIC : 004000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 11.4.0
Boot Done! :)
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
ADL: Preparing for write certificates...

Erase NPC... Ok
Writing NPC... Ok
Erase CCC... Ok
Writing CCC... Ok
Erase HWC... Ok
Writing HWC... Ok

ADL: Writing Flash certs done! :)

ADL: Close_Session
Content: 000300000000000000000000000000
ADL: Reboot
Wait, reconneting...
Check phone mode...
Phone already in Test mode, skip change...

Writing SimLock Key... Ok!
Writing SimLock Data... Ok!
Writing Super Dongle Key... Ok!

SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!! :(

WMDRM_PD key sent... Ok

Done!

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Reading Phone Info....
Connected phone - Nokia 6700 classic
Software ver : V 13.10 16-06-10 RM-470 (c) Nokia
IMEI : 356943038896396
Ape Ver :
APE Var :
APE ADSP:
DSP Ver : ICPR81_10w09
APE Test:
PPM : V 13.10 16-06-10 RM-470 (c) Nokia CIB
CNT : Content: cib_tj_bron e V 13.10 16-06-10 RM-470 (c) Nokia
Product SN : 0
Product code : 0588580
Base Prd.code:
Module code :
Long Prod.SN : 0
Hardware info=======
HWID :
Retu : 34
Tahvo : 00
Batery: 3749 mV
Camera:
CMT BT: 410B-v190
APE BT:
APE HW:
LCDVer: TPO
RF ic :
Lock info ===========
IMEI : 356943038896396
IMEI spNet : 3A 65 49 03 83 98 36 09
IMEI svNet : 33 65 49 03 83 98 36 49 F6

Conf key : 8000000000000002
Provider key : 2440700000000000
Provider : AT&T;U.S.A. (3650)
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 7

LOCK STATUS :
=============================
BLK : 1
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS : All Open
=============================
CRT308 Backup Created... :)

User Code : 12345
MMC pwd : no any record found
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery]

Done!

card found: S/N *******
registered to: komyor

Connect phone on selected interface...

UFS S/N 38442 boot - Ok

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Local SX4 procedure started...

Phone Imei: 356943038896396
Use custom key...
Step 1...
Step 2...
SX4 Auth fail...

Repair SD procedure started...

Phone Imei: 356943038896396
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000030000022600010007600C192102011104
CMT EM0 ID : 00000C34
CMT EM1 ID : 00000C30
CMT PUB ID : 12C0000EDB61034401A300C172D0903DA6A3D124
CMT MODE ID : 00
CMT R_HASH : 25B977A055BE9B5DEC0C38A2A279C695
CMT ROM ID : 3E273BF637BE26FA

CMT : Sending 2nd loader...
Use : RAPUv11_2nd.fg
rap= 12C0000EDB61034401A300C172D0903DA6A3D124
hash= 25B977A055BE9B5DEC0C38A2A279C695
key= 0B841707CEBDE786F9908AB66263F465A42AC7DB
Init Service mode... Wait...

Key file updated...
Check phone mode...
Phone in Local mode
Seting Test mode... wait...
Test mode set
Writing Super Dongle Key... Ok
Done!

Local SX4 procedure started...

Phone Imei: 356943038896396
Use custom key...
Step 1...
Step 2...
Step 3...
SX4 Auth - Ok
Done!

Uploading RF/Battery tune to phone...
Using : RM-470.pm
Operating mode is OK, no need change...

Field 1
Record 0 write - Ok
Record 2 write - Ok
Record 4 write - Ok
Record 6 write - Ok
Record 7 write - Ok
Record 8 write - Ok
Record 13 write - Ok
Record 16 write - Ok
Record 18 write - Ok
Record 20 write - Ok
Record 22 write - Ok
Record 23 write - Ok
Record 24 write - Ok
Record 26 write - Ok
Record 28 write - Ok
Record 29 write - Ok
Record 31 write - Ok
Record 33 write - Ok
Record 34 write - Ok
Record 35 write - Ok
Record 37 write - Ok
Record 39 write - Ok
Record 40 write - Ok
Record 41 write - Ok
Record 42 write - Ok
Record 43 write - Ok
Record 44 write - Ok
Record 45 write - Ok
Record 46 write - Ok
Field 2
Record 0 write - Ok
Field 309
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 3 write - Ok
Record 4 write - Ok
Record 5 write - Ok
Record 7 write - Ok
Record 17 write - Ok

Check ST_SECURITY now...
Security status : ST_SECURITY => OK

Done!

Elapsed: 00:00:02

Reading Phone Info....
Connected phone - Nokia 6700 classic
Software ver : V 13.10 16-06-10 RM-470 (c) Nokia
IMEI : 356943038896396
Ape Ver :
APE Var :
APE ADSP:
DSP Ver : ICPR81_10w09
APE Test:
PPM : V 13.10
16-06-10
RM-470
(c) Nokia
CIB
CNT : Content: cib_tj_bronze
V 13.10
16-06-10
RM-470
(c) Nokia
Product SN : 0
Product code : 0588580
Base Prd.code:
Module code :
Long Prod.SN : 0
Hardware info=======
HWID :
Retu : 34
Tahvo : 00
Batery: 4457 mV
Camera:
CMT BT: 410B-v190
APE BT:
APE HW:
LCDVer: TPO
RF ic : |Vapaus_5.1 | Aura_?.?
Lock info ===========
IMEI : 356943038896396
IMEI spNet :
IMEI svNet :

Conf key : 8000000000000002
Provider key : 2440700000000000
Provider : AT&T;U.S.A. (3650)
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 7

LOCK STATUS :
=============================
BLK : 1
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS : All Open
=============================
User Code : 12345
MMC pwd : no any record found
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery]

Done!

mixanik

08.05.2011, 23:05

принесли сегодня N79на железный ремонт(заменить разъем наушников),решил проверить работу с Бестом :
Rd Key:
Read Uniq key data started...

Checking BUS...
Switch jaf to FlashMode...
FlashMode set Ok
Booting phone...

BOOT 1ST : C0

CMT part info :
CMT ASICID : 000000010000022600010006400C192101021103
CMT EM0 ID : 00000295
CMT EM1 ID : 00000B22
CMT PUB ID : 1E7000078563005281B21FDEEEC766DA96C222EF
CMT MODE ID : 00
CMT R_HASH : CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT ROM ID : A8C1D6713E691FF8

CMT : Sending 2nd loader...
CMT Loader sent, Boot Ok

rap= 1E7000078563005281B21FDEEEC766DA96C222EF
hash= CAEEBB65D3C48E6DC73B49DC5063A2EE
key= 776ED51FC36204D49559BABCB97708DBD7FF4F22

Switch jaf to FBUS...
FbusMode set Ok

Can't find phone :(
Enter info in Special.log Manually, please

Read fail...!

после этой ошибки пришлось шить JAF, т.к. стало невозможно делать check.

Berick

10.05.2011, 09:07

E52 после заказа RPL, ST_SECURITY damaged

SX4 с первого раза

Phone found!
Series 60 Device detected!
read info... - Ok

Processing Server SX4 Auth
Checking SDD key...
Check SD : Key is Ok
Operating mode is OK, no need change...
Connecting to server...
Connect to server Ok, checking
SX4 Server : Online, Ready
SX4, processing Step #1
SX4, processing Step #2
SX4, processing Step #3
SX4 Result : Ok

Uploading RF/Battery tune to phone...
Using : RM-469.pm
Operating mode is OK, no need change...

Field 1
Record 0 write - Ok
Record 2 write - Ok
Record 4 write - Ok
Record 6 write - Ok
Record 7 write - Ok
Record 8 write - Ok
Record 13 write - Ok
Record 16 write - Ok
Record 18 write - Ok
Record 20 write - Ok
Record 22 write - Ok
Record 23 write - Ok
Record 24 write - Ok
Record 26 write - Ok
Record 28 write - Ok
Record 29 write - Ok
Record 31 write - Ok
Record 33 write - Ok
Record 34 write - Ok
Record 35 write - Ok
Record 39 write - Ok
Record 40 write - Ok
Record 41 write - Ok
Record 42 write - Ok
Record 43 write - Ok
Record 44 write - Ok
Record 45 write - Ok
Field 309
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 3 write - Ok
Record 4 write - Ok
Record 7 write - Ok
Record 17 write - Ok

Check ST_SECURITY now...
Security status : ST_SECURITY => OK

Done!

Elapsed: 00:00:01

:appl:

NonDel

10.05.2011, 10:34

C7-00 после заказа RPL, ST_SECURITY damaged:
Processing Server SX4 Auth
Checking SDD key...
Check SD : Key is Ok
Check phone mode...
Phone in Charging mode
Seting Local mode... wait...
Local mode set
Connecting to server...
Connect to server Ok, checking
SX4 Server : Online, Ready
SX4, processing Step #1
SX4, processing Step #2
SX4, processing Step #3
SX4 Result : Ok

Uploading RF/Battery tune to phone...
Using : RM-675.pm
Check phone mode...
Phone in Charging mode
Seting Local mode... wait...
Local mode set

Field 1
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 4 write - Ok
Record 6 write - Error
Record 7 write - Error
Record 8 write - Ok
Record 13 write - Error
Record 15 write - Ok
Record 16 write - Ok
Record 17 write - Ok
Record 18 write - Ok
Record 19 write - Ok
Record 22 write - Ok
Record 26 write - Ok
Record 27 write - Ok
Record 28 write - Error
Record 29 write - Ok
Record 30 write - Ok
Record 31 write - Ok
Record 32 write - Error
Record 33 write - Ok
Record 35 write - Ok
Record 36 write - Ok
Record 38 write - Error
Record 39 write - Ok
Record 40 write - Ok
Record 41 write - Error
Record 43 write - Ok
Record 44 write - Error
Record 45 write - Error
Field 2
Record 0 write - Error
Field 309
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 3 write - Ok
Record 4 write - Ok
Record 7 write - Ok
Record 17 write - Ok
Field 382
Record 1 write - Ok

Check ST_SECURITY now...
Security status : ST_SECURITY => DAMAGED :(

Done!

Elapsed: 00:00:56

Phone disconected!

Connect phone on selected interface...

Делаю через UFS, в USB Local - нет

megaduca

10.05.2011, 11:09

C7-00 после заказа RPL, ST_SECURITY damaged:

У меня было тоже самое, поэтому лог не привожу тут. Проблема, скорее всего, в неправильном PM-файле. Я взял файлик с поддержки сервера UO5OQ и у меня все получилось.
Пробуйте

JayDi

10.05.2011, 19:04

NonDel, По данному С7 - в аську стукните, интересно разобраться с данными телефонами в плане локала.

chabrus

10.05.2011, 19:19

5530 RM-504

info с 20 версией

Phone found!
Series 60 Device detected!
read info... - Ok

Reading Phone Info....
Connected phone - Nokia 5530 XpressMusic
Software ver : V ICPR72_09w20.7 25-06-09 RM-504 (c) Nokia
IMEI : 354200030875353
Ape Ver : V 10.0.050
APE Var : V 10.0.050V 10.0.050 10.0.050.228.01
APE ADSP: 256
DSP Ver : ICPR72_09w19_1
APE Test: rm504_ENO_x_09wk19v0.080
PPM :
CNT : V 10.0.050
Product SN : CIP481770
Product code : 0589308
Base Prd.code: 0569346
Module code :
Long Prod.SN : 0
Hardware info=======
HWID : 0802
Retu : 16
Tahvo : 22
Batery: 4966 mV
Camera:
CMT BT:
APE BT:
APE HW: 256
LCDVer:
RF ic :
Lock info ===========
IMEI : 354200030875353
IMEI spNet : 3A 45 02 00 03 78 35 05
IMEI svNet : 33 45 02 00 03 78 35 05 F4

Conf key : 0000000000000000
Provider key : 2440700000000000
Provider : AT&T;U.S.A. (3650)
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 7

LOCK STATUS :
=============================
BLK : 1
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS : All Open
=============================
CRT308 Backup Created... :)

User code : Crypted
UserDataExLevel : Low [Gallery]

Done!

попытка слить телефонную книгу той же версией

BackUp UserData : [PhoneBook]
Generation mode : [S60]
Operating mode is OK, no need change...
SmartPhone algo initialise...
Setup data...
StartUp FileSystem...
Fsrun OK...
Detect Symbian OS Generation...
Detected: [Symbian OS 9.3/9.4] Phone!
Warning! Many [9.3] and [9.4] phones not supported now :(
Running : APE_TEST_SERVER,w45_08,(c)NMP ] Found!
Will read 8 blocks...
Sorry, FS error : Phone not answer... :(
Error during read...

21 версия при подключении телефона, и попытке любой операции зависает намертво. Начинает работать после того, как отсоедините телефон.
При попытке прочитать инфу виснет на этом месте:
Phone found!
Series 60 Device detected!
read info... - Ok

Reading Phone Info....
SW ver : Error
IMEI : Error
PPM : Error
CNT : Error
DSP Ver : Error
PCode : Error
BPCode : Error
HWID : Error
LCDVer : Error
IMEI : Error
Если отсоединить кабель, выходит остальная часть лога:
Sl Conf : --
Sl Prof : -
Sl Aux :
Hw Sig :
Provider : Unknown providers

Lock info:

Done!

Phone disconected!

Connect phone on selected interface...

Проверьте, у кого есть под рукой аналогичный телефон.

JayDi

10.05.2011, 19:26

chabrus, надеюсь, 21 закинули в папку с 20 версией?
Программа Settings.ini не может найти и по дефолту думает, что все вокруг - dct4

chabrus

10.05.2011, 19:29

chabrus, надеюсь, 21 закинули в папку с 20 версией?
Программа Settings.ini не может найти и по дефолту думает, что все вокруг - dct4

Нет пославил отдельно.
Сейчас попробуем.

инфо

Phone found!
Series 60 Device detected!
read info... - Ok

Reading Phone Info....
Connected phone - Nokia 5530 XpressMusic
Software ver : V ICPR72_09w20.7 25-06-09 RM-504 (c) Nokia
IMEI : 354200030875353
Ape Ver : V 10.0.050
APE Var : V 10.0.050V 10.0.050 10.0.050.228.01
APE ADSP: 256
DSP Ver : ICPR72_09w19_1
APE Test: rm504_ENO_x_09wk19v0.080
PPM :
CNT : V 10.0.050
Product SN : CIP481770
Product code : 0589308
Base Prd.code: 0569346
Module code :
Long Prod.SN : 0
Hardware info=======
HWID : 0802
Retu : 16
Tahvo : 22
Batery: 3747 mV
Camera:
CMT BT:
APE BT: HCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12708.
APE HW: 256
LCDVer:
RF ic :
Lock info ===========
IMEI : 354200030875353
IMEI spNet : 3A 45 02 00 03 78 35 05
IMEI svNet : 33 45 02 00 03 78 35 05 F4

Conf key : 0000000000000000
Provider key : 2440700000000000
Provider : AT&T;U.S.A. (3650)
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 7

LOCK STATUS :
=============================
BLK : 1
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS : All Open
=============================
CRT308 Backup Created... :)

User code : Crypted
UserDataExLevel : Low [Gallery]

Done!

Попытка подключения прошла со второго раза
но работает очень быстро.
Авторизация и запись 1-309 блоков РМ

Processing Server SX4 Auth
Checking SDD key...
Check SD : Key is Ok
Operating mode is OK, no need change...
Connecting to server...
Connect to server Ok, checking
SX4 Server : Online, Ready
SX4, processing Step #1
SX4, processing Step #2
SX4, processing Step #3
SX4 Result : Ok

Uploading RF/Battery tune to phone...
Using : RM-504.pm
Operating mode is OK, no need change...

Field 1
Record 0 write - Ok
Record 2 write - Ok
Record 4 write - Ok
Record 6 write - Ok
Record 8 write - Ok
Record 13 write - Ok
Record 16 write - Ok
Record 18 write - Ok
Record 20 write - Ok
Record 24 write - Ok
Record 25 write - Ok
Record 26 write - Ok
Record 28 write - Ok
Record 29 write - Ok
Record 31 write - Ok
Record 34 write - Ok
Field 2
Record 0 write - Ok
Field 309
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 4 write - Ok
Record 5 write - Ok
Record 7 write - Ok
Record 8 write - Ok
Record 17 write - Ok

Check ST_SECURITY now...
Security status : ST_SECURITY => OK

Done!

Elapsed: 00:00:00

Checking StartUp data ...
-----------------------
SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security is Ok
-----------------------

PA_SimLock Version :
PA_SL3 phone detected

Done!

JayDi

10.05.2011, 19:31

5530 в главной роли с 21 версией

Connect phone on selected interface...

Core version : 1.19 , Rev : 4.0

Selected FlashSettings : Dead-Test
Check FlashFiles, Please, wait...

Files Set for Flashing :
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Press phone's power button or insert cable & charger! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000010000022600010006400C192101051105
CPU ID : RAPIDO v11 , Features : Dead-Test
EM0 ID: 00000296
EM1 ID: 00000B22
PUBLIC ID: 03200108B49E00527F73549FB5442598B49546E8
ASIC MODE ID: 00
ROOT KEY HASH: B8C3ADECFC997FCD8081D3DEAF870B8C
ROM ID: 4B9B75103E691FF8
PatchRAWLoader: Patched OK
Processing RAWLOADER...
Processing RAP3NAND ...
Processing PASUBTOC ...
Processing PAPUBKEYS...
Processing UPDAPP ...
Boot Done! :)
TIME : Boot time : 00:00:03
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL -> [2nd] changing...
ADL Server confirm flashmode!
ADL : Auth done...
ADL : ASIC CMT select Ok
=================
ADL : End flashing
ADL : Finalize...

Flashing done!
Total flash time : 00:00:00
Reboot phone now...

Afterflash not selected, skip
Done!

Elapsed: 00:00:07
Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Reading Phone Info....
Connected phone - Nokia 5530 XpressMusic
Software ver : V ICPR72_10w25.3 11-10-10 RM-504 (c) Nokia
IMEI : 358304035965130
Ape Ver : V 32.0.007
APE Var : V 32.0.007V 32.0.007 V 32.0.007
APE ADSP: 256
DSP Ver : ICPR72_10w16
APE Test: 09wk19v0.130
PPM :
CNT : v 30.0.001_001_000_U001 05-03-10 vanilla RM504
Product SN : 038A35FAA
Product code : 0573173
Base Prd.code: 0573512
Module code : 0204038
Long Prod.SN : 0
Hardware info=======
HWID : 0903
Retu : 16
Tahvo : 22
Batery: 4038 mV
Camera:
CMT BT:
APE BT:
APE HW: 256
LCDVer:
RF ic :
Lock info ===========
IMEI : 358304035965130
IMEI spNet : 3A 85 03 04 53 69 15 03
IMEI svNet : 33 85 03 04 53 69 15 13 F8

Conf key : 0000000000000000
Provider key : 2440700000000000
Provider : AT&T;U.S.A. (3650)
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 7

LOCK STATUS :
=============================
BLK : 1
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS : All Open
=============================
CRT308 Backup Created... :)

User code : Crypted
UserDataExLevel : Low [Gallery]

Done!

Processing Server SX4 Auth
Checking SDD key...
Check SD : Key is Ok
Operating mode is OK, no need change...
Connecting to server...
Connect to server Ok, checking
SX4 Server : Online, Ready
SX4, processing Step #1
SX4, processing Step #2
SX4, processing Step #3
SX4 Result : Ok

Uploading RF/Battery tune to phone...
Using : RM-504.pm
Operating mode is OK, no need change...

Field 1
Record 0 write - Ok
Record 2 write - Ok
Record 4 write - Ok
Record 6 write - Ok
Record 8 write - Ok
Record 13 write - Ok
Record 16 write - Ok
Record 18 write - Ok
Record 20 write - Ok
Record 24 write - Ok
Record 25 write - Ok
Record 26 write - Ok
Record 28 write - Ok
Record 29 write - Ok
Record 31 write - Ok
Record 34 write - Ok
Field 2
Record 0 write - Ok
Field 309
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 4 write - Ok
Record 5 write - Ok
Record 7 write - Ok
Record 8 write - Ok
Record 17 write - Ok

Check ST_SECURITY now...
Security status : ST_SECURITY => OK

Done!

Elapsed: 00:00:00

Checking StartUp data ...
-----------------------
SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security is Ok
-----------------------

PA_SimLock Version :
PA_SL3 phone detected

Done!

chabrus

10.05.2011, 19:40

JayDi, я поправил предыдущий пост, Вы оказались правы, все работает.

eniseisila

13.05.2011, 10:26

C2-01 RM-271
Нужна поддержка.
При добавлении в файл settings.ini этой модели
(к примеру RM-721=101100, не знаю какие шесть цифр добавлять, честно)
В Dead-Test режиме программа загоняет в Test Mode и висит на
Connect phone on selected interface...

Core version : 1.19 , Rev : 4.0

Selected FlashSettings : Dead-Test
Check FlashFiles, Please, wait...

Files Set for Flashing :
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000010000022600000001020C192102044100
CPU ID : RAP3Gv4 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001051
EM1 ID: 00001060
PUBLIC ID: 2EF0010EB7B558407654242976628B554C6200E5
ASIC MODE ID: 00
ROOT KEY HASH: 7B045400E1752022F9EB80B0DEA9C65D
ROM ID: 67E82268F29CEA60
Use RAP3Gv40_2nd.fg , Rev : 3.0 Ver : 11.10.0
Processing RAWLOADER...
FLIC : 003000EC
Req : XSR 1.6
Use RAP3Gv40_XSR17_alg.fg , Rev : 3.0 Ver : 11.10.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:05
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
ADL: phone is in flash mode

Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 357012044433559
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Cert Read done!

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : C:\InfinityBox\BEST\Backup\Cert\357012044433559_CR T.rpl

ADL: Close_Session
Content: 000300000000010000000100000000
ADL: Reboot

Flashing done!
Total flash time : 00:00:00
Reboot phone now...

Выдергиваешь кабель все встает на свои места,
Afterflash not selected, skip
Done!

Elapsed: 00:00:14
Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Phone disconected!

обратно вставляешь, аппарат в тэсте, опять "висит".
Необходимо прочитать код телефона.
Можно что нибудь сделать?

Прошит без проблем.

JayDi

13.05.2011, 10:48

Сколько просил, что с удовольствием куплю именно такой телефон - тишина =(
Не могу понять причину, пока на руках не будет тушки...
В данном варианте - это какй-то хитрый SW-глюк. Прошивка MCU / MCU+PPM высшей или текущей версии решают проблему. Данные остаются, есессно (safe flash или вручную настройки - без постфлэшига - чек/рид онли)
Могу сделать так, что ее вообще не будет, как только в руках окажется именно телефон с данной проблемой.
PS : UNI-строчка S40 - 003101
S60 - 111111

JayDi

13.05.2011, 19:55

Завтра, после 16.00 по МСК, у кого валяются мертвые софтовые 5530 и JAF - в аську.
Не факт, что они выживут... Но, других вариантов нет :)

ildar

14.05.2011, 08:31

E52 rm-469

заливка заводского RPL

Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
SimLock Data found!
SimLock key found!
SuperDongle Key found!
CMLA key found!
WMDRM key found!
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000030000022600010007600C192102011104
CMT EM0 ID : 00001040
CMT EM1 ID : 00001030
CMT PUB ID : 15A000140F290E491C76FD67DBEA062FF05D7D98
CMT MODE ID : 00
CMT R_HASH : 25B977A055BE9B5DEC0C38A2A279C695
CMT ROM ID : 3E273BF637BE26FA

CMT : Sending 2nd loader...
Use : RAPUv11_2nd.fg , Rev : 0.0 Ver : 1.37.1
CMT Loader sent, Boot Ok
MCU Configuration
FLASHID : 00400020 , CMT , NOR
CMT Flash ID : 00400020 < ST => M39BORBOAD
FLCNT : 000000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAPUv11_algo_xsr16.fg , Rev : 0.0 Ver : 1.40.0
CMT Algo sent
PAPUBkeys blank (erased or HW failure)
Transmission mode : Dual (Ddr, TX2)

Boot Done!

Preparing for write certificates...

Switching to CMT...

CMT : NPC erase Ok
Programming report : Error NPC
Programming report : Error NPC
Writing NPC... Ok

CMT : CCC erase Ok
Programming report : Error CCC
Programming report : Error CCC
Writing CCC... Ok

CMT : HWC erase Ok
Programming report : Error HWC
Programming report : Error HWC
Writing HWC... Ok

Init Service mode... Wait...

Check phone mode...
Phone in Local mode
Seting Test mode... wait...
Test mode set

Writing SimLock Key... Ok!
Writing SimLock Data... Ok!
Writing Super Dongle Key... Ok

SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!! :(

Done!

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Checking StartUp data ...
-----------------------
SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!! :(
-----------------------

PA_SimLock Version :
PA_SL3 phone detected

Done!

Server Sx4

Done!

Processing Server SX4 Auth
Checking SDD key...
Check SD : Key is Ok
Operating mode is OK, no need change...
Connecting to server...
Connect to server Ok, checking
SX4 Server : Online, Ready
SX4, processing Step #1
SX4, processing Step #2
SX4 error, #1 , 1) Timeout , 2) SDD damaged or non-original

Checking StartUp data ...
-----------------------
SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!! :(
-----------------------

PA_SimLock Version :
PA_SL3 phone detected

Done!

Processing Server SX4 Auth
Checking SDD key...
Check SD : Key is Ok
Operating mode is OK, no need change...
Connecting to server...
Connect to server Ok, checking
SX4 Server : Online, Ready
SX4, processing Step #1
SX4, processing Step #2
SX4, processing Step #3
SX4 Result : Ok

Uploading RF/Battery tune to phone...
Using : RM-469.pm
Operating mode is OK, no need change...

Field 1
Record 0 write - Ok
Record 2 write - Ok
Record 4 write - Ok
Record 6 write - Ok
Record 7 write - Ok
Record 8 write - Ok
Record 13 write - Ok
Record 16 write - Ok
Record 18 write - Ok
Record 20 write - Ok
Record 22 write - Ok
Record 23 write - Ok
Record 24 write - Ok
Record 26 write - Ok
Record 28 write - Ok
Record 29 write - Ok
Record 31 write - Ok
Record 33 write - Ok
Record 34 write - Ok
Record 35 write - Ok
Record 39 write - Ok
Record 40 write - Ok
Record 41 write - Ok
Record 42 write - Ok
Record 43 write - Ok
Record 44 write - Ok
Record 45 write - Ok
Field 309
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 3 write - Ok
Record 4 write - Ok
Record 7 write - Ok
Record 17 write - Ok

Check ST_SECURITY now...
Security status : ST_SECURITY => OK

Phone found!
Series 60 Device detected!
read info... - Ok

Checking StartUp data ...
-----------------------
SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security is Ok
-----------------------

PA_SimLock Version :
PA_SL3 phone detected

Done!

Reading Phone Info....
Connected phone - Nokia E52-1
Software ver : V ICPR82_10w22.10 03-01-11 RM-469 (c) Nokia
IMEI : 355216038215433
Ape Ver : 054.003
APE Var : 054.003054.003.05.01054.003.C00.01
APE ADSP: 256
DSP Ver : ICPR82_10w22.7
APE Test: v0.a087
PPM :
CNT :
Product SN : 0
Product code :
Base Prd.code:
Module code :
Long Prod.SN : 0
Hardware info=======
HWID :
Retu : 40
Tahvo : 00
Batery: 4550 mV
Camera:
CMT BT:
APE BT:
APE HW: 256
LCDVer:
RF ic : |Vapaus_5.1 | Aura_?.?
Lock info ===========
IMEI : 355216038215433
IMEI spNet :
IMEI svNet :

Conf key : 0000000000000000
Provider key : 2440700000000000
Provider : Not Locked
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 7

LOCK STATUS :
=============================
BLK : 1
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS : All Open
=============================
User code : Crypted
UserDataExLevel : Low [Gallery]

Done!

:appl:

Layder

14.05.2011, 11:19

e52 восстанавливал после замены флешки на флешку с 6700, в наличии были бекапы MT-box (NPC/CCC/HWC, PM).

Connect phone on selected interface...

FlashFile verify disabled

Files Set for Flashing :
MCU : rm469_051.018_prd.core.fpsx
PPM : rm469_051.018_04.01_Baltian_prd.rofs2.fpsx
PPM2 : rm469_051.018_C00.01_DEFAULT_prd.rofs3.fpsx
CNT : RM469_ENO_09w23v0.a078.01.fpsx
APE : rm469_051.018_U007.000_prd.uda.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000030000022600010007600C192102011104
EM0 ID: 00001040
EM1 ID: 00001030
PUBLIC ID: 18800101E3610344554F10BCE2F94C95DF86EFE7
ASIC MODE ID: 00
ROOT KEY HASH: 25B977A055BE9B5DEC0C38A2A279C695
ROM ID: 3E273BF637BE26FA
Use RAPUv11_2nd.fg
Processing RAWLOADER...
FLIC : 00400020
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg
Boot Done! :)
TIME : Boot time : 00:00:01
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
ADL: phone is in flash mode

Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 000000000000000
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Cert Read done!

===Flashing [MCU]===
Erase : Processing rm469_051.018_prd.core.fpsx
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm469_051.018_prd.core.fpsx
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [SOS+PMML]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [SOS*UPDAPP]
CMT: Writing Hash CERT [SOS*DSP0]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [SOS*ISASW]
CMT: Writing Hash CERT [SOS+CORE]
CMT: Writing Hash CERT [SOS+ROFS1]
Total writen 425 blocks
TIME : Write time : 00:00:23
MCU Write done
ADL: Request programm status
NAND status : 00000005 / 00000005 / 00000000

===Flashing [PPM]===
Erase : Processing rm469_051.018_04.01_Baltian_prd.rofs2.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm469_051.018_04.01_Baltian_prd.rofs2.fpsx
CMT: Writing Hash CERT [SOS+ROFS2]
Total writen 156 blocks
TIME : Write time : 00:00:07
PPM Write done
ADL: Request programm status
NAND status : 00000005 / 00000005 / 00000000

===Flashing [PPM2]===
Erase : Processing rm469_051.018_C00.01_DEFAULT_prd.rofs3.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm469_051.018_C00.01_DEFAULT_prd.rofs3.fpsx
CMT: Writing Hash CERT [SOS+ROFS3]
Total writen 32 blocks
TIME : Write time : 00:00:01
PPM Write done
ADL: Request programm status
NAND status : 00000005 / 00000005 / 00000000

===Flashing [CNT]===
Erase : Processing RM469_ENO_09w23v0.a078.01.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing RM469_ENO_09w23v0.a078.01.fpsx
CMT: Writing Hash CERT [SOS*ENO]
Total writen 12 blocks
TIME : Write time : 00:00:00
CNT Write done
ADL: Request programm status
NAND status : 00000005 / 00000005 / 00000000

===Flashing [APE]===
Erase : Processing rm469_051.018_U007.000_prd.uda.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm469_051.018_U007.000_prd.uda.fpsx
Total writen 15 blocks
TIME : Write time : 00:00:00
APE Write done
ADL: Request programm status
NAND status : 00000005 / 00000005 / 00000000

ADL: Close_Session
Content: 000300000000050000000500000000
ADL: Reboot

Flashing done!
Total flash time : 00:00:34
Reboot phone now...

Reading Phone Info....
Connected phone - Nokia E52-1
Software Info: V ICPR82_10w22 03-06-10 RM-469 (c) Nokia
IMEI: 12345610654321?
Ape Version: 051.018
Product code: 0578057
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
FullFactorySet...OK!
ProductTuneSet...OK!
SwUpgradeSet...OK!
AfterFlash operations done... Reconnect, wait...
Done!

Phone found!
Series 60 Device detected!
read info... - Ok

Operating mode is OK, no need change...

Field 1
Record 0 write - Ok
Record 2 write - Ok
Record 4 write - Ok
Record 6 write - Ok
Record 7 write - Ok
Record 8 write - Ok
Record 13 write - Ok
Record 16 write - Ok
Record 18 write - Ok
Record 20 write - Ok
Record 22 write - Ok
Record 23 write - Ok
Record 24 write - Ok
Record 26 write - Ok
Record 28 write - Ok
Record 29 write - Ok
Record 31 write - Ok
Record 33 write - Ok
Record 34 write - Ok
Record 35 write - Ok
Record 39 write - Ok
Record 40 write - Ok
Record 41 write - Ok
Record 42 write - Ok
Record 43 write - Ok
Record 44 write - Ok
Record 45 write - Ok
Field 2
Record 0 write - Ok
Field 4
Record 1 write - Ok
Record 3 write - Ok
Record 4 write - Ok
Record 9 write - Ok
Record 28 write - Ok
Field 8
Record 0 write - Ok
Record 3 write - Ok
Record 4 write - Ok
Record 8 write - Ok
Record 10 write - Ok
Field 11
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 3 write - Ok
Record 4 write - Ok
Field 12
Record 0 write - Ok
Field 26
Record 0 write - Ok
Record 1 write - Ok
Field 31
Record 4 write - Ok
Field 44
Record 0 write - Ok
Field 50
Record 0 write - Ok
Field 54
Record 0 write - Ok
Record 2 write - Ok
Field 88
Record 0 write - Ok
Field 96
Record 0 write - Ok
Record 1 write - Ok
Field 107
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 3 write - Ok
Record 25 write - Ok
Record 26 write - Ok
Field 117
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 3 write - Ok
Record 4 write - Ok
Record 5 write - Ok
Record 6 write - Ok
Record 8 write - Ok
Record 13 write - Ok
Record 14 write - Ok
Record 16 write - Ok
Field 120
Record 0 write - Skiped
Record 1 write - Skiped
Record 2 write - Skiped
Record 3 write - Skiped
Field 153
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 3 write - Ok
Record 4 write - Ok
Record 5 write - Ok
Record 6 write - Ok
Field 193
Record 2 write - Ok
Record 3 write - Ok
Record 4 write - Ok
Record 9 write - Ok
Field 217
Record 0 write - Ok
Field 239
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 3 write - Ok
Record 4 write - Ok
Record 5 write - Ok
Record 6 write - Ok
Field 291
Record 0 write - Ok
Field 308
Record 0 write - Skiped
Record 1 write - Skiped
Record 3 write - Skiped
Record 4 write - Skiped
Record 6 write - Skiped
Record 7 write - Skiped
Record 9 write - Skiped
Field 309
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 3 write - Ok
Record 4 write - Ok
Record 7 write - Ok
Record 17 write - Ok
Field 313
Record 0 write - Ok
Field 322
Record 0 write - Ok
Field 329
Record 0 write - Ok
Field 334
Record 0 write - Ok
Field 341
Record 0 write - Ok
Record 3 write - Ok
Record 4 write - Ok
Field 354
Record 0 write - Ok
Field 356
Record 0 write - Ok
Record 1 write - Ok
Field 360
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Field 369
Record 0 write - Ok

Done!

Phone disconected!

Connect phone on selected interface...

Will Write RPL keys now...
Check RPL file...
NPC Data found!
CCC Data found!
HWC Data found!
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000030000022600010007600C192102011104
EM0 ID: 00001040
EM1 ID: 00001030
PUBLIC ID: 18800101E3610344554F10BCE2F94C95DF86EFE7
ASIC MODE ID: 00
ROOT KEY HASH: 25B977A055BE9B5DEC0C38A2A279C695
ROM ID: 3E273BF637BE26FA
Use RAPUv11_2nd.fg
Processing RAWLOADER...
FLIC : 00400020
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg
Boot Done! :)
TIME : Boot time : 00:00:01
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
ADL: Preparing for write certificates...

ADL: Writing Flash certs done! :)

ADL: Close_Session
Content: 000300000000050000000500000000
ADL: Reboot

-> No any Flex keys selected, skip flex part

Done!

Phone disconected!

Phone found!
Series 60 Device detected!
read info... - Ok

Repair SD procedure started...

Phone Imei: 359327033807771
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000030000022600010007600C192102011104
CMT EM0 ID : 00001040
CMT EM1 ID : 00001030
CMT PUB ID : 2BE00101AB6E0344A860A41C76CD0C8EAAF651C9
CMT MODE ID : 00
CMT R_HASH : 25B977A055BE9B5DEC0C38A2A279C695
CMT ROM ID : 3E273BF637BE26FA

CMT : Sending 2nd loader...
Use : RAPUv11_2nd.fg
rap= 2BE00101AB6E0344A860A41C76CD0C8EAAF651C9
hash= 25B977A055BE9B5DEC0C38A2A279C695
key= 996F986E199FCCF541EF5136D5625B321DF62FCC
Init Service mode... Wait...

Key file updated...
Check phone mode...
Phone in Local mode
Seting Test mode... wait...
Test mode set
Writing Super Dongle Key... Ok
Done!

Will Write CCC/HWC keys now...

Using : RM-469.rpl
CCC Data found!
HWC Data found!

Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000030000022600010007600C192102011104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001040
EM1 ID: 00001030
PUBLIC ID: 2BE00101AB6E0344A860A41C76CD0C8EAAF651C9
ASIC MODE ID: 00
ROOT KEY HASH: 25B977A055BE9B5DEC0C38A2A279C695
ROM ID: 3E273BF637BE26FA
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 11.10.0
Processing RAWLOADER...
FLIC : 00400098
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 11.10.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
ADL: Preparing for write certificates...

Erase CCC... Ok
Writing CCC... Ok
Erase HWC... Ok
Writing HWC... Ok

ADL: Writing Flash certs done! :)

ADL: Close_Session
Content: 000300000000000000000000000000
ADL: Reboot
All done, disconneting...

Done!

Elapsed: 00:00:04

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Local SX4 procedure started...

Phone Imei: 359327033807771
Use custom key...
Step 1...
Step 2...
Step 3...
SX4 Auth - Ok
Done!

Uploading RF/Battery tune to phone...
Using : RM-469.pm
Operating mode is OK, no need change...

Field 1
Record 0 write - Ok
Record 2 write - Ok
Record 4 write - Ok
Record 6 write - Ok
Record 7 write - Ok
Record 8 write - Ok
Record 13 write - Ok
Record 16 write - Ok
Record 18 write - Ok
Record 20 write - Ok
Record 22 write - Ok
Record 23 write - Ok
Record 24 write - Ok
Record 26 write - Ok
Record 28 write - Ok
Record 29 write - Ok
Record 31 write - Ok
Record 33 write - Ok
Record 34 write - Ok
Record 35 write - Ok
Record 39 write - Ok
Record 40 write - Ok
Record 41 write - Ok
Record 42 write - Ok
Record 43 write - Ok
Record 44 write - Ok
Record 45 write - Ok
Field 309
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 3 write - Ok
Record 4 write - Ok
Record 7 write - Ok
Record 17 write - Ok

Check ST_SECURITY now...
Security status : ST_SECURITY => OK

Done!

Elapsed: 00:00:02

Checking StartUp data ...
-----------------------
SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security is Ok
-----------------------

PA_SimLock Version :
PA_SL3 phone detected

Done!

1) прошивка
2) запись PM
3) запись RPL (USB)
4) Repair SD (UFS)
5) запись RPL with CCC/HWC (USB)
6) Upload Tune PM (USB)

Mumang

17.05.2011, 17:18

С5-03 Rm-697 Best 1.21 beta:appl:Connect phone on selected interface...

Core version : 1.19 , Rev : 4.0

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : RM-697_12.0.023_prd.core.C00
PPM : RM-697_12.0.023_prd.rofs2.V05
PPM2 : RM-697_12.0.023_C01_prd.rofs3.fpsx
CNT : RM697_12.0.000_009_U001.uda.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000030000022600010007600C192102031104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00000C35
EM1 ID: 00000C30
PUBLIC ID: 0BD0010A85D40344ADB6910A310B7B71796E9187
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 11.10.0
Processing RAWLOADER...
FLIC : 004000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 11.10.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:01
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
ADL: phone is in flash mode

Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 354349044927724
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Cert Read done!

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : C:\InfinityBox\BEST\Backup\Cert\354349044927724_CR T.rpl

===Flashing [MCU]===
Erase : Processing RM-697_12.0.023_prd.core.C00
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01
Write : Processing RM-697_12.0.023_prd.core.C00
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [SOS+PMML]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [SOS*UPDAPP]
CMT: Writing Hash CERT [SOS*DSP0]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [SOS*ISASW]
CMT: Writing Hash CERT [SOS+CORE]
CMT: Writing Hash CERT [SOS+ROFS1]
Total writen 412 blocks
TIME : Write time : 00:00:16
MCU Write done
ADL: Request programm status
NAND status : 00000001 / 00000001 / 00000000

===Flashing [PPM]===
Erase : Processing RM-697_12.0.023_prd.rofs2.V05
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing RM-697_12.0.023_prd.rofs2.V05
CMT: Writing Hash CERT [SOS+ROFS2]
Total writen 113 blocks
TIME : Write time : 00:00:04
PPM Write done
ADL: Request programm status
NAND status : 00000001 / 00000001 / 00000000

===Flashing [PPM2]===
Erase : Processing RM-697_12.0.023_C01_prd.rofs3.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing RM-697_12.0.023_C01_prd.rofs3.fpsx
CMT: Writing Hash CERT [SOS+ROFS3]
Total writen 2 blocks
TIME : Write time : 00:00:00
PPM Write done
ADL: Request programm status
NAND status : 00000001 / 00000001 / 00000000

===Flashing [CNT]===
Erase : Processing RM697_12.0.000_009_U001.uda.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing RM697_12.0.000_009_U001.uda.fpsx
Total writen 65 blocks
TIME : Write time : 00:00:02
CNT Write done
ADL: Request programm status
NAND status : 00000001 / 00000001 / 00000000

ADL: Close_Session
Content: 000300000000010000000100000000
ADL: Reboot

Flashing done!
Total flash time : 00:00:25
Reboot phone now...

Reading Phone Info....
Connected phone - Nokia C5-03
Software Info: V ICPR82_11w03 21-01-11 RM-697 (c) Nokia
IMEI: 354349044927724
Ape Version: V 12.0.023
Product code: 059C5G4
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
FullFactorySet...OK!
ProductTuneSet...OK!
SwUpgradeSet...OK!
AfterFlash operations done... Reconnect, wait...
Done!

estonij

18.05.2011, 16:04

C7-00 пришёл с user code. Cделал Full factory, код перестал запрашивать. Но появилась System error. Перешил, не помогло. Весь контент в галерее битый. Как воскресить?

Alva

18.05.2011, 16:49

estonij, пошейте phoenix'ом файл контента или же просто через update service, должно уйти

JayDi

18.05.2011, 17:06

После формата внутренней памяти, если System error не отпустит - значит - пропаять надо.

пошейте phoenix'ом файл контента или же просто через update service, должно уйти
да как бы и Best все отлично шьет.

estonij

18.05.2011, 19:05

Странно, но почему то в прошивке не было файла контента. Скачал 14ю версию. Всё заколосилось. Остался только вопрос, почему при сбросе кода телефона BESTом, появилась системная ошибка. Ведь не должно.

JayDi

18.05.2011, 20:09

Сделался обычный сброс, а вот что именно там внутри телефона произошло при этом - даже не могу и сказать.

Mumang

18.05.2011, 20:21

chabrus

18.05.2011, 22:03

1202 через интерфейс UFS
Phone found!
Series 40 Device detected! [DCT4+]
read info... - Ok

Reading Phone Info....
SW ver : V 04.03 29-06-09 RH-112 (c) Nokia
IMEI : 351511041061228
PPM : V 04.03
29-06-09
RH-112
(c) Nokia
ER
DSP Ver : PR81_09w22_U ( PCode : 0562273
BPCode : 0558505
HWID : 2006
LCDVer : WIN:SERI:90
NT7542
IMEI : 351511041061228
Sl Conf : 001-01-00000000000
Sl Prof : 000000000003000-2
Sl Aux : 000B0000
Hw Sig : 5D80A69AD4E27292
Provider : Default Test Operator

Lock info:
Block 1
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
Block 2
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
Block 3
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
Block 4
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
Block 5
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
Block 6
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
Block 7
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;

Попытка сбросить юзер код

Resetting User Code to default (12345)...
Clear data : Ok
Result: not set
Done!

После того код не изменился.
После полного сброса код изменился на 12345

Phone found!
Series 40 Device detected! [DCT4+]
read info... - Ok

Resetting selected items...
Check phone mode...
Phone already in Test mode, skip change...
Settings Full Factory Defaults...
Set OK!

Elapsed: 00:00:00

Или я что то делал не так, или нужно проверить программу.

JayDi

19.05.2011, 04:51

JayDi вопрос на всякий случай можно только контент на С7 прошить ситуация неординарная ибо человек не хочет шить полностью, а через бекапы ибо телефонная книга ему нужна, залочено приложение у него KMS в частности, просто с ними дела не имел, можно через Best прошить отдельно файлы cnt ? Понимаю что вопрос дебильный, но и клиент в голову раненый видимо... Full factory наверное проще сделать как я понимаю, платформа лично для меня новая поэтому не судите строго)
Ну, если нужно только CNT, который MassMemory - то шить MCU+PPM+MMC - без сбросов. Книжка останется и приложения - настройки и прочее - тоже должны.
Один только контент - затирает MMC, не прошиваясь. Как достану тушку - может сделаю прошивку только MMC.

chabrus, скорее всего, телефон имеет другую систему хранения, делалось для dct4 s40/infineon/s30 new . Проверю.

Mumang

19.05.2011, 08:38

Книжка останется и приложения - настройки и прочее - тоже должны.
Вот это и не надо, Kaspersky mobile security запаролен, придётся целиком шить, это клиент какой-то придурок попался, завтра придёт по результатам логов выложу по прошивке.

JayDi

19.05.2011, 08:52

в таком случае достаточно прошивки обычной, без ммс-контента. Проблем быть не должно.

NeOnyx

19.05.2011, 15:34

PANsoft

19.05.2011, 22:25

Респект ребята) Работайте в том же духе, сил и успехов Вам.

http://www.mcrf.ru/forum/showpost.php?p=230325&postcount=2
http://www.mcrf.ru/forum/showpost.php?p=230332&postcount=3
http://www.mcrf.ru/forum/showpost.php?p=230337&postcount=4

Только в след. раз убедительно прошу не исправлять ошибок других комманд... Сервис предназначен для "наших" пользователей, а "не наши"...

NeOnyx

20.05.2011, 10:13

Сервис предназначен для "наших" пользователей

Разумеется, просто был небольшой тест сервиса

NeOnyx

20.05.2011, 15:58

Не получилось сделать backup телефонной книги:

Reading Phone Info....
Connected phone - Nokia E75
Software ver : V ICPR72_09w04.3 05-03-09 RM-412 (c) Nokia
IMEI : 359557ХХХХХХХХХ
Ape Ver : 100.48.78
APE Var : 100.48.78_rofs2100.48.78.232.02_rofs3
APE ADSP: 256
DSP Ver : ICPR72_09w04
APE Test: RM412ENOx2008wk50v0.017
PPM :
CNT : 100.48.78
Product SN : STD028194
Product code : 0580618
Base Prd.code: 0558819
Module code :
Long Prod.SN : 0
Hardware info=======
HWID : 0500
Retu : 15
Tahvo : 22
Batery: 4801 mV
Camera:
CMT BT:
APE BT:
APE HW: 256
LCDVer:
RF ic :
Lock info ===========
IMEI : 359557ХХХХХХХХХ
IMEI spNet : 3A 95 55 07 11 48 85 08
IMEI svNet : 33 95 55 07 11 48 85 08 F3

Conf key : 0000000000000000
Provider key : 2440700000000000
Provider : AT&T;U.S.A. (3650)
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 7

LOCK STATUS :
=============================
BLK : 1
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS : All Open
=============================
CRT308 Backup Created... :)

User code : Crypted
UserDataExLevel : Low [Gallery]

Done!

BackUp UserData : [PhoneBook]
Generation mode : [S60]
Operating mode is OK, no need change...
SmartPhone algo initialise...
Setup data...
StartUp FileSystem...
Fsrun OK...
Detect Symbian OS Generation...
Detected: [Symbian OS 9.3/9.4] Phone!
Warning! Many [9.3] and [9.4] phones not supported now :(
Running : APE_TEST_SERVER,w23_08,(c)NMP
Found!
Will read 109 blocks...
Sorry, FS error : Phone not answer... :(
Error during read...

Error during read...

Хотелось бы уточнить чем это вызвано

Turboxxx

20.05.2011, 16:14

Detected: [Symbian OS 9.3/9.4] Phone!
Warning! Many [9.3] and [9.4] phones not supported now :(
В данный момент не поддерживается.

chabrus

22.05.2011, 21:28

N95 RM-159
read info
Reading Phone Info....
Connected phone - Nokia N95
Software ver : V 06wk41v31 05-06-07 RM-159 (c) Nokia
IMEI : 356996014131329
Ape Ver : 12.0.013
APE Var : 12.0.013all.01
APE ADSP: 256
DSP Ver : dsprap_pb06w41v34
APE Test: rm159_eno_2007wk16v0.150
PPM :
CNT :
Product SN : SAN582985
Product code : 0548763
Base Prd.code: 0530865
Module code :
Long Prod.SN : 0
Hardware info=======
HWID : 5900
Retu : 15
Tahvo : 22
Batery: 4897 mV
Camera:
CMT BT:
APE BT: HCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.
APE HW: 1
LCDVer:
RF ic :
Lock info ===========
IMEI : 356996014131329
IMEI spNet : 3A 65 99 06 41 31 31 02
IMEI svNet : 33 65 99 06 41 31 31 02 F6

Conf key : 0000000000000000
Provider key : 2440700000000000
Provider : AT&T;U.S.A. (3650)
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 7

LOCK STATUS :
=============================
BLK : 1
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS : All Open
=============================
CRT308 Backup Created... :)

User Code : 12345
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery]

Done!

бекап телефонной книги

BackUp UserData : [PhoneBook]
Generation mode : [S60]
Operating mode is OK, no need change...
SmartPhone algo initialise...
Setup data...
StartUp FileSystem...
Fsrun OK...
Detect Symbian OS Generation...
Detected: [Symbian OS 9.1/9.2] Phone!
Running : APE_TEST_SERVER,w25_07,(c)NMP
Found!
Will read 34 blocks...
csv file save to C:\InfinityBox\BEST\RM-159 Nokia N95_356996014131329.csv
50 vcf files saved to C:\InfinityBox\BEST\Phones_Data\356996014131329\VC F\
File saved to : C:\InfinityBox\BEST\RM-159 Nokia N95_356996014131329.Bs60pb
Read done ;)
Done...

прошивка и восстановление телефонной книги

card found: S/N 0838:0118
registered to: chabrus

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Reading Phone Info....
Connected phone - Nokia N95
Software ver : V 06wk41v31 05-06-07 RM-159 (c) Nokia
IMEI : 356996014131329
Ape Ver : 12.0.013
APE Var : 12.0.013all.01
APE ADSP: 256
DSP Ver : dsprap_pb06w41v34
APE Test: rm159_eno_2007wk16v0.150
PPM :
CNT :
Product SN : SAN582985
Product code : 0548763
Base Prd.code: 0530865
Module code :
Long Prod.SN : 0
Hardware info=======
HWID : 5900
Retu : 15
Tahvo : 22
Batery: 4897 mV
Camera:
CMT BT:
APE BT: HCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.
APE HW: 1
LCDVer:
RF ic :
Lock info ===========
IMEI : 356996014131329
IMEI spNet : 3A 65 99 06 41 31 31 02
IMEI svNet : 33 65 99 06 41 31 31 02 F6

Conf key : 0000000000000000
Provider key : 2440700000000000
Provider : AT&T;U.S.A. (3650)
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 7

LOCK STATUS :
=============================
BLK : 1
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS : All Open
=============================
CRT308 Backup Created... :)

User Code : 12345
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery]

Done!

BackUp UserData : [PhoneBook]
Generation mode : [S60]
Operating mode is OK, no need change...
SmartPhone algo initialise...
Setup data...
StartUp FileSystem...
Fsrun OK...
Detect Symbian OS Generation...
Detected: [Symbian OS 9.1/9.2] Phone!
Running : APE_TEST_SERVER,w25_07,(c)NMP
Found!
Will read 34 blocks...
csv file save to C:\InfinityBox\BEST\RM-159 Nokia N95_356996014131329.csv
50 vcf files saved to C:\InfinityBox\BEST\Phones_Data\356996014131329\VC F\
File saved to : C:\InfinityBox\BEST\RM-159 Nokia N95_356996014131329.Bs60pb
Read done ;)
Done...

Searching for MMC pwd...
Generation : [S60]
Operating mode is OK, no need change...
SmartPhone algo initialise...
Setup data...
StartUp FileSystem...
Fsrun OK...
Detect Symbian OS Generation...
Detected: [Symbian OS 9.1/9.2] Phone!
Running : APE_TEST_SERVER,w25_07,(c)NMP
Password Base not found at all :(
Error during read...

Backup Certificates now...
Backup CRT308 data...
CRT308 Backup Created... :)
Check communication with phone....
ADL not support backup mode, rpl reading impossible

Elapsed: 00:00:00
Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Backup Certificates now...
Backup CRT308 data...
CRT308 Backup Created... :)
Check communication with phone....
ADL not support backup mode, rpl reading impossible

Elapsed: 00:00:00
Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Backup Certificates now...
Backup CRT308 data...
CRT308 Backup Created... :)
Check communication with phone....
ADL not support backup mode, rpl reading impossible

Elapsed: 00:00:00
Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Backup Certificates now...
Backup CRT308 data...
CRT308 Backup Created... :)
Check communication with phone....
ADL not support backup mode, rpl reading impossible

Elapsed: 00:00:00
Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Core version : 1.19 , Rev : 4.0

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : RM-159_35.0.002_PR.C0R
PPM : RM159_31.0.002_039_U01_uda.fpsx
CNT : RM-159_35.0.002_PR.v05
Flashing phone now...
Check files done...
-> SWversion check skipped : Manual mode selected

-> APE devices are not support boot in test\local mode!
Do all backup operation, and after do reset\format
PowerUp phone in normal mode for flashing

Core version : 1.19 , Rev : 4.0

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : RM-159_35.0.002_PR.C0R
PPM : RM159_31.0.002_039_U01_uda.fpsx
CNT : RM-159_35.0.002_PR.v05
Flashing phone now...
Check files done...
-> SWversion check skipped : Manual mode selected

-> APE devices are not support boot in test\local mode!
Do all backup operation, and after do reset\format
PowerUp phone in normal mode for flashing

Core version : 1.19 , Rev : 4.0

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : RM-159_35.0.002_PR.C0R
PPM : RM159_31.0.002_039_U01_uda.fpsx
CNT : RM-159_35.0.002_PR.v05
Flashing phone now...
Check files done...
-> SWversion check skipped : Manual mode selected

-> APE devices are not support boot in test\local mode!
Do all backup operation, and after do reset\format
PowerUp phone in normal mode for flashing

Phone disconected!

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Phone disconected!

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Core version : 1.19 , Rev : 4.0

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : RM-159_35.0.002_PR.C0R
PPM : RM159_31.0.002_039_U01_uda.fpsx
CNT : RM-159_35.0.002_PR.v05
Flashing phone now...
Check files done...
-> SWversion check skipped : Manual mode selected

-> APE devices are not support boot in test\local mode!
Do all backup operation, and after do reset\format
PowerUp phone in normal mode for flashing

Phone disconected!

Connect phone on selected interface...

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Core version : 1.19 , Rev : 4.0

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : RM-159_35.0.002_PR.C0R
PPM : RM159_31.0.002_039_U01_uda.fpsx
CNT : RM-159_35.0.002_PR.v05
Flashing phone now...
Check files done...
-> SWversion check skipped : Manual mode selected
Backup CRT308 data...
CRT308 Backup Created... :)
Check communication with phone....
ADL Boot req
Communication verify done... Preparing...
Gathering phone info...
RAP_BOOT: 0B01010202010000
RAP_PUBLIC: 17A001030A6E0058DDC16890E6ACE0C5E983D1E1
CMT_ROOTKEY: CAEEBB65D3C48E6DC73B49DC5063A2EE
RAP_PAPUBKEY: 25129A39D9A3B031CA0124E1E90F5A17ED3EFC89
APE_ROOTKEY: BA8710A7E1CD5A2909B9A875DB27AA24
Check communication with phone...
CMT Loader len: 214912, CHK: 6953
Sending CMT boot....
APE Loader len: 1504256, CHK: 421A
Sending APE boot....
Boot done
TIME : Boot time : 00:00:10
Reboot....
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
Waiting for response: 28
Waiting for response: 27
ADL Server confirm flashmode!
ADL : Auth Ok
ADL : ASIC CMT select Ok
ADL : ASIC APE select Ok
===Flashing [MCU]===
Erase : Processing RM-159_35.0.002_PR.C0R
Found 3 areas to erase
Erasing area 0x00080000 - 0x007B1641, NOR, CMT
Result: 0000
Erasing area 0x00000000 - 0x0005FFFF, NOR, CMT
Result: 0000
Erasing area 0x00880000 - 0x00FDFFFF, NOR, CMT
Result: 0000
Found 8 areas to erase
Erasing area 0x00000200 - 0x0000AFFF, NAND, APE
Result: 0000
Erasing area 0x0000B800 - 0x000AFFFF, NAND, APE
Result: 0000
Erasing area 0x00000000 - 0x00000FFF, NAND, APE
Result: 0000
Erasing area 0x0000D800 - 0x0000E9FF, NAND, APE
Result: 0000
Erasing area 0x00080000 - 0x000BFFFF, NAND, APE
Result: 0000
Erasing area 0x000E0000 - 0x0045FFFF, NAND, APE
Result: 0000
Erasing area 0x004C0000 - 0x0073FFFF, NAND, APE
Result: 0000
Erasing area 0x00A40000 - 0x0633FFFF, NAND, APE
Result: 0000
Partitioning : Ok [4]
TIME : Erase time : 00:01:30
Write : Processing RM-159_35.0.002_PR.C0R
Total 458 [80/378/0] blocks to write, writing...
CMT : Writing Hash CERT [NOLO]
CMT : Writing Hash CERT [KEYS]
CMT : Writing Hash CERT [PRIMAPP]
CMT : Writing Hash CERT [PASUBTOC]
CMT : Writing Hash CERT [PAPUBKEYS]
CMT : Writing Hash CERT [UPDAPP]
CMT : Writing Hash CERT [DSP0]
CMT : Writing Hash CERT [MCUSW]
APE : Writing Hash CERT [X-LOADER]
APE : Writing Hash CERT [KEYS]
APE : Writing Hash CERT [PRIMAPP]
APE : Writing Hash CERT [X-LOADER]
APE : Writing Hash CERT [KEYS]
APE : Writing Hash CERT [PRIMAPP]
APE : Writing Hash CERT [SOS+XZIP]
APE : Writing Hash CERT [PASUBTOC]
APE : Writing Hash CERT [PAPUBKEYS]
APE : Writing Hash CERT [SOS+UPDAPP]
APE : Writing Hash CERT [SOS+CORE]
APE : Writing Hash CERT [SOS+ROFS]
TIME : Write time : 00:01:49
MCU Write done
===Flashing [PPM]===
Erase : Processing RM159_31.0.002_039_U01_uda.fpsx
Found 1 areas to erase
Erasing area 0x06340000 - 0x0FA3FFFF, NAND, APE
Result: 0000
TIME : Erase time : 00:00:00
Write : Processing RM159_31.0.002_039_U01_uda.fpsx
Total 3032 [0/3032/0] blocks to write, writing...
TIME : Write time : 00:01:21
PPM Write done
===Flashing [CNT]===
Erase : Processing RM-159_35.0.002_PR.v05
Found 1 areas to erase
Erasing area 0x04C40000 - 0x0633FFFF, NAND, APE
Result: 0000
Partitioning : Ok [4]
TIME : Erase time : 00:00:00
Write : Processing RM-159_35.0.002_PR.v05
Total 98 [0/98/0] blocks to write, writing...
APE : Writing Hash CERT [SOS+ROFX]
TIME : Write time : 00:00:23
CNT Write done
=================
ADL : End flashing
ADL : Close CMT session Ok
ADL : Close APE session Ok

Flashing done!
Total flash time : 00:05:05
Reboot phone now...

Reading Phone Info....
Connected phone - Nokia N95
Software Info: V 06wk41v64.23 05-11-09 RM-159 (c) Nokia
IMEI: 356996014131329
Product code: 0548763
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
FullFactorySet...OK!
ProductTuneSet...OK!
SwUpgradeSet...OK!
AfterFlash operations done... Reconnect, wait...
Done!

Elapsed: 00:05:50

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Restoring UserData : [PhoneBook]
Generation mode : [S60]
Operating mode is OK, no need change...
SmartPhone algo initialise...
Setup data...
StartUp FileSystem...
Fsrun OK...
Detect Symbian OS Generation...
Detected: [Symbian OS 9.1/9.2] Phone!
Running : APE_TEST_SERVER,w25_07,(c)NMP
Searching phonebook

Old phonebook not found, skip earase...
File size is : 33826 bytes
Will write 34 blocks...
Patch header... Writing data...

Write done! Please, start phone in normal mode,
And after that enter in phonebook - phone can once time
Going to reboot - it is normally :)
Done...

Reading LifeTimer data...
LifeTime is: 1987712 seconds
Phone works: 552 Hours; 8 minutes; 32 seconds
Done

Resetting life Timer...
Reset Done!
Done

Phone disconected!

Connect phone on selected interface...

Работает нормально, но непллохо бы прикрутить и бекап СМС.
Бекап там есть, но не в том формате, чтобы залить обратно.

Gatin

22.05.2011, 21:48

а про бекап смс никто и не говрил вроде(в смысле перезаписи), они считываються в текстовом формате, причем на сколько я помню и для s40 и s60.

chabrus

22.05.2011, 21:58

а про бекап смс никто и не говрил вроде(в смысле перезаписи), они считываються в текстовом формате, причем на сколько я помню и для s40 и s60.

На некоторых аппаратах, если в программе активна галочка *.smspkg, и она отмечена во время считывания бекапа, смски можно влить обратно в телефон:)
Было бы отлинчо, если данная функция реализуется на всех моделях.
Для особо привередливых клиентов.

JayDi

23.05.2011, 05:28

Будет, но, немного попозже.
Особенности смартов требуют больше времени.

JayDi

24.05.2011, 16:31

User ACCEPTED FULL ERASE
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000010000022600010006400C192101031103
CPU ID : RAPIDOv11 , Features : Dead-Test, USBRPL, WR/ER-USB
EM0 ID: 00000295
EM1 ID: 00000B22
PUBLIC ID: 1520020E4375005203B1E3DC6649618EA175C650
ASIC MODE ID: 00
ROOT KEY HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID: 4B9B75103E691FF8
Use URAPIDOv11_2nd.fg , Rev : 2.0 Ver : 11.16.0
Processing RAWLOADER...
FLIC : 004000EC
Req : XSR 1.6
Use URAPIDOv11_XSR17_alg.fg , Rev : 2.0 Ver : 11.16.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:00
CFL: Wait for Loader take control ...
ADL: Check mode
Phone ready, boot Ok
TransReq set Ok
PAPUBkeys : 76A20187051C30162EE91C77AE5E6011F5F1BA61

ADL: Preparing for erase...

Full Erase started...
Asic : CMT , Sub : NAND
Erase Area 0x00000000-0x0FFFFFFF
Erasing Ok , [0F]
Erase done , time : 00:00:01

ADL: Erase done

ADL: Close_Session
Content: 000300000000000000000000000000
ADL: Reboot
Phone disconected!

Connect phone on selected interface...

Core version : 1.22 , Rev : 4.5

Selected FlashSettings : Cold Flash
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : RM-356_52.0.007_prd.core.C00
PPM : RM-356_52.0.007_prd.rofs2.V05
PPM2 : RM-356_52.0.007_C01_prd.rofs3.fpsx
CNT : RM-356_52.0.007_026_000_U01.uda.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Forcing ColdFlash mode
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000010000022600010006400C192101031103
CPU ID : RAPIDOv11 , Features : Dead-Test, USBRPL, WR/ER-USB
EM0 ID: 00000295
EM1 ID: 00000B22
PUBLIC ID: 1520020E4375005203B1E3DC6649618EA175C650
ASIC MODE ID: 00
ROOT KEY HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID: 4B9B75103E691FF8
Use URAPIDOv11_2nd.fg , Rev : 2.0 Ver : 11.16.0
Processing RAWLOADER...
FLIC : 004000EC
Req : XSR 1.6
Use URAPIDOv11_XSR17_alg.fg , Rev : 2.0 Ver : 11.16.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:00
Reopening the connection...
CFL: Wait for Loader take control ...
ADL: Check mode
Phone ready, boot Ok
TransReq set Ok
PAPUBkeys : Blank (Erased or HW failure)

ADL: phone is in flash mode
===Flashing [MCU]===
Erase : Processing RM-356_52.0.007_prd.core.C00
Partitioning....
Partitioning Ok...
Erasing....
Erasing Data....
Erase area : 0x00040000 - 0x00082FFF , CMT , NAND
Erase area : 0x00083400 - 0x003FFFFF , CMT , NAND
Erase area : 0x00400000 - 0x007FFFFF , CMT , NAND
Erase area : 0x00800000 - 0x00D5FFFF , CMT , NAND
Erase area : 0x00D60000 - 0x09E5FFFF , CMT , NAND
Erase Partition
Partition 0x0A
Erase Ok...
TIME : Erase time : 00:00:01
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

Write : Processing RM-356_52.0.007_prd.core.C00
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [SOS*UPDAPP]
CMT: Writing Hash CERT [SOS*ENO]
CMT: Writing Hash CERT [SOS*DSP0]
CMT: Writing Hash CERT [SOS*ISASW]
CMT: Writing Hash CERT [SOS+CORE]
CMT: Writing Hash CERT [SOS+ROFS1]
Total writen 441 blocks
TIME : Write time : 00:01:32
MCU Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

===Flashing [PPM]===
Erase : Processing RM-356_52.0.007_prd.rofs2.V05
Erasing....
Erasing Data....
Erase area : 0x07180000 - 0x0915FFFF , CMT , NAND
Erase Ok...
TIME : Erase time : 00:00:00
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

Write : Processing RM-356_52.0.007_prd.rofs2.V05
CMT: Writing Hash CERT [SOS+ROFS2]
Total writen 113 blocks
TIME : Write time : 00:00:24
PPM Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

===Flashing [PPM2]===
Erase : Processing RM-356_52.0.007_C01_prd.rofs3.fpsx
Erasing....
Erasing Data....
Erase area : 0x09160000 - 0x09E5FFFF , CMT , NAND
Erase Ok...
TIME : Erase time : 00:00:00
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

Write : Processing RM-356_52.0.007_C01_prd.rofs3.fpsx
CMT: Writing Hash CERT [SOS+ROFS3]
Total writen 6 blocks
TIME : Write time : 00:00:01
PPM Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

===Flashing [CNT]===
Erase : Processing RM-356_52.0.007_026_000_U01.uda.fpsx
Erasing....
Erasing Data....
Erase area : 0x09E60000 - 0x0F71FFFF , CMT , NAND
Erase Ok...
TIME : Erase time : 00:00:00
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

Write : Processing RM-356_52.0.007_026_000_U01.uda.fpsx
Total writen 29 blocks
TIME : Write time : 00:00:07
CNT Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

ADL: Close_Session
Content: 000300000000000000000000000000
ADL: Reboot

Flashing done!
Total flash time : 00:02:07
Reboot phone now...

Reading Phone Info....
Connected phone - Nokia 5800 XpressMusic
Software Info: V ICPR72_10w25.3 11-10-10 RM-356 (c) Nokia
IMEI: 12345610654321?
Ape Version: V 52.0.007
Product code:
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
FullFactorySet...OK!
ProductTuneSet...OK!
SwUpgradeSet...OK!
AfterFlash operations done... Reconnect, wait...
Done!

Elapsed: 00:02:21
Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Phone disconected!

Connect phone on selected interface...

Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
SimLock Data found!
SimLock key found!
WMDRM key found!
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000010000022600010006400C192101031103
CPU ID : RAPIDOv11 , Features : Dead-Test, USBRPL, WR/ER-USB
EM0 ID: 00000295
EM1 ID: 00000B22
PUBLIC ID: 1520020E4375005203B1E3DC6649618EA175C650
ASIC MODE ID: 00
ROOT KEY HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID: 4B9B75103E691FF8
Use URAPIDOv11_2nd.fg , Rev : 2.0 Ver : 11.16.0
Processing RAWLOADER...
FLIC : 004000EC
Req : XSR 1.6
Use URAPIDOv11_XSR17_alg.fg , Rev : 2.0 Ver : 11.16.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:00
Reopening the connection...
CFL: Wait for Loader take control ...
ADL: Check mode
Phone ready, boot Ok
TransReq set Ok
PAPUBkeys : 76A20187051C30162EE91C77AE5E6011F5F1BA61

ADL: Preparing for write certificates...

Erase NPC... Ok
Writing NPC... Ok
Erase CCC... Ok
Writing CCC... Ok
Erase HWC... Ok
Writing HWC... Ok

ADL: Writing Flash certs done! :)

ADL: Close_Session
Content: 000300000000000000000000000000
ADL: Reboot
Wait, reconneting...
Check phone mode...
Phone in Local mode
Seting Test mode... wait...
Test mode set

Writing SimLock Data... Ok!
Writing SimLock Key... Ok!

SDD Key status : SDData Damaged!!!!! :(
SimLock status : SimLock is Ok
Security status : Security is Ok

WMDRM_PD key sent... Ok

Done!

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Local SX4 procedure started...

Phone Imei: 353205037535109
Use custom key...
Step 1...
Step 2...
SX4 Auth fail...

Repair SD procedure started...

Phone Imei: 353205037535109
Key file exists, no need to read...
Operating mode is OK, no need change...
Writing Super Dongle Key... Ok!
Done!

Local SX4 procedure started...

Phone Imei: 353205037535109
Use custom key...
Step 1...
Step 2...
Step 3...
SX4 Auth - Ok
Upload PM checked
Uploading RF/Battery tune to phone...
Using : RM-356.pm
Operating mode is OK, no need change...

Field 1
Record 0 write - Ok
Record 2 write - Ok
Record 4 write - Ok
Record 6 write - Ok
Record 8 write - Ok
Record 13 write - Ok
Record 16 write - Ok
Record 18 write - Ok
Record 20 write - Ok
Record 22 write - Ok
Record 23 write - Ok
Record 24 write - Ok
Record 25 write - Ok
Record 26 write - Ok
Record 28 write - Ok
Record 29 write - Ok
Record 31 write - Ok
Record 33 write - Ok
Record 34 write - Ok
Record 35 write - Ok
Record 37 write - Ok
Record 39 write - Ok
Record 44 write - Ok
Record 45 write - Ok
Field 309
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 4 write - Ok
Record 5 write - Ok
Record 7 write - Ok
Record 8 write - Ok
Record 17 write - Ok

Check ST_SECURITY now...
Security status : ST_SECURITY => OK

Done!

Elapsed: 00:00:01

Upload done

Checking StartUp data ...
-----------------------
SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security is Ok
-----------------------

PA_SimLock Version :
PA_SL2 phone detected

Done!

Reading Phone Info....
Connected phone - Nokia 5800 XpressMusic
Software ver : V ICPR72_10w25.3 11-10-10 RM-356 (c) Nokia
IMEI : 353205037535109
Ape Ver : V 52.0.007
APE Var : V 52.0.007V 52.0.007 V 52.0.007
APE ADSP: 256
DSP Ver : ICPR72_10w16
APE Test: eno_version
PPM :
CNT :
Product SN : 0
Product code :
Base Prd.code:
Module code :
Long Prod.SN : 0
Hardware info=======
HWID :
Retu : 15
Tahvo : 22
Batery: 3655 mV
Camera:
CMT BT:
APE BT:
APE HW: 256
LCDVer:
RF ic :
Lock info ===========
IMEI : 353205037535109
IMEI spNet : 3A 35 02 05 73 35 15 00
IMEI svNet : 33 35 02 05 73 35 15 70 F0

Conf key : 0000000000000000
Provider key : 2440700000000000
Provider : AT&T;U.S.A. (3650)
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 7

LOCK STATUS :
=============================
BLK : 1
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS : All Open
=============================
CRT308 Backup Created

User code : Crypted
UserDataExLevel : Low [Gallery]

Done!

Phone disconected!

Connect phone on selected interface...

chabrus

24.05.2011, 18:44

3120с считал пароль карты памяти.
Вышло 2 пароля, подошел первый, значит функция работает.:appl:

Phone found!
Series 40 Device detected!
read info... - Ok

Reading MMC password...
MMC pass Record found, saving...
2 MMC pwd records are found! Extracting...
-------------------------------
We have next Pass: 08
We have next Pass: .адим
-------------------------------
Done!

JayDi

24.05.2011, 18:56

Скажу по секрету - она с самого начала работала :)

chabrus

24.05.2011, 19:01

Скажу по секрету - она с самого начала работала :)

Просто был случай с 6500s, в котором правильно считался пароль, о котором я как то писал))

mel0man

25.05.2011, 11:56

софт 1,22 нокия Е75 не захотел повышать версию, грит даунгрейдить будем?
Phone found!
Series 60 Device detected!
read info... - Ok

Reading Phone Info....
Connected phone - Nokia E75
Software ver : V ICPR72_09w09.2 27-05-09 RM-412 (c) Nokia
IMEI : 359557012814113
Ape Ver : 110.48.125
APE Var : 110.48.125_rofs2110.48.125_rofs3
APE ADSP: 256
DSP Ver : ICPR72_09w09
APE Test: RM412ENOx2008wk50v0.017
PPM :
CNT : 110.48.125
Product SN : STD080719
Product code : 0567147
Base Prd.code: 0558819
Module code :
Long Prod.SN : 0
Hardware info=======
HWID : 0500
Retu : 15
Tahvo : 22
Batery: 4131 mV
Camera:
CMT BT:
APE BT: HCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12708.
APE HW: 256
LCDVer:
RF ic :
Lock info ===========
IMEI : 359557012814113
IMEI spNet : 3A 95 55 07 21 18 14 01
IMEI svNet : 33 95 55 07 21 18 14 01 F4

Conf key : 0000000000000000
Provider key : 2440700000000000
Provider : AT&T;U.S.A. (3650)
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 7

LOCK STATUS :
=============================
BLK : 1
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS : All Open
=============================
CRT308 Backup Created

User code : Crypted
UserDataExLevel : Low [Gallery]

Done!

Core version : 1.22 , Rev : 4.5

Selected FlashSettings :
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm412_2111201_prd.c00
PPM : rm412_2111201_prd_prdapps.rofs2.v19
PPM2 : rm412_2111201_prd_prdapps.rofs3.v19
CNT : rm412_2111201.11U
APE : RM412_ENO_A_2009wk42v0.031.fpsx
Flashing phone now...
Check files done...
-> Check SW version...
FlashFile version : 211.12.01
Phone version : 110.48.125
-> Check SW version : Downgrade try
-> Downgrade enabled by user request
Backup CRT308 data...
CRT308 Backup Created
SL2 Simlock read ... ok
WMDRM read ... ok
SimLock Data saved...
SimLock Key saved...
WMDRM_PD Data saved...

RPL saved : C:\Best\Backup\Cert\359557012814113_SIM.rpl

Check communication with phone....
ADL req restart
Communication verify done... Preparing...
Gathering phone info...
Check communication with phone...
DownGr: Prepare phone for downgrade...
-> Failed to prepare > protected data > break!
-> Downgrade not possible for that phone... :(
-> Error while prepare for downgrade!
Break flashing procedure...
Error while flashing... :(

JayDi

25.05.2011, 12:28

Спасибо, добавлю в базу.
Manual Flash гфлку отметьте - все пройдет.
Версия прошивки телефона немного неверно определяется.

Sedy

26.05.2011, 09:44

Версией 1.22 удачно прошил Nokia N8 по УСБ-кабелю, также и считал рпл.
Core version : 1.22 , Rev : 4.5

Selected FlashSettings :
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : RM-596_014.002_79.92_prd.core.fpsx
PPM : RM-596_014.002_04.01_Russian_79.92_prd.rofs2.fpsx
PPM2 : RM-596_014.002_00.01_79.92_prd.rofs3.fpsx
CNT : RM-596_014.002_U01.01_79.92_prd.uda.fpsx
Flashing phone now...
Check files done...
-> Check SW version...
FlashFile version : 014.002
Phone version : 013.016
-> Check SW version : Upgrade
Check communication with phone....
ADL req restart
Communication verify done... Preparing...
Gathering phone info...
Check communication with phone...
Reboot....
Connection opened successfully
Waiting for communication response...
: Bootrom Ok!
ASIC ID: 000000030000022600010007600C192102031104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00000C35
EM1 ID: 00000C30
PUBLIC ID: 1140000858D50344F27A9E2B5A76FC23BACD8CA9
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 11.16.0
Processing RAWLOADER...
FLIC : 005000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 11.16.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
ADL: phone is in flash mode
===Flashing [MCU]===
Erase : Processing RM-596_014.002_79.92_prd.core.fpsx
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01
Write : Processing RM-596_014.002_79.92_prd.core.fpsx
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [SOS+PMML]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [SOS*UPDAPP]
CMT: Writing Hash CERT [SOS*DSP0]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [SOS*ISASW]
CMT: Writing Hash CERT [SOS+CORE]
CMT: Writing Hash CERT [SOS+ROFS1]
Total writen 549 blocks
TIME : Write time : 00:00:24
MCU Write done
ADL: Request programm status
NAND status : 00000003 / 00000003 / 00000000

===Flashing [PPM]===
Erase : Processing RM-596_014.002_04.01_Russian_79.92_prd.rofs2.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing RM-596_014.002_04.01_Russian_79.92_prd.rofs2.fpsx
CMT: Writing Hash CERT [SOS+ROFS2]
Total writen 178 blocks
TIME : Write time : 00:00:08
PPM Write done
ADL: Request programm status
NAND status : 00000003 / 00000003 / 00000000

===Flashing [PPM2]===
Erase : Processing RM-596_014.002_00.01_79.92_prd.rofs3.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing RM-596_014.002_00.01_79.92_prd.rofs3.fpsx
CMT: Writing Hash CERT [SOS+ROFS3]
Total writen 2 blocks
TIME : Write time : 00:00:00
PPM Write done
ADL: Request programm status
NAND status : 00000003 / 00000003 / 00000000

===Flashing [CNT]===
Erase : Processing RM-596_014.002_U01.01_79.92_prd.uda.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01
Write : Processing RM-596_014.002_U01.01_79.92_prd.uda.fpsx
Total writen 228 blocks
TIME : Write time : 00:00:10
CNT Write done
ADL: Request programm status
NAND status : 00000003 / 00000003 / 00000000

ADL: Close_Session
Content: 000300000000030000000300000000
ADL: Reboot

Flashing done!
Total flash time : 00:00:47
Reboot phone now...

Reading Phone Info....
Connected phone - Nokia N8-00
Software Info: V 92PS1_10w46.9 01-03-11 RM-596 (c) Nokia
IMEI: 3569880403ххххх
Ape Version: 014.002
Product code: 0599762
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
AfterFlash operations done... Reconnect, wait...
Done!

Elapsed: 00:01:16

Продукт код только несмог поменять.

Write Product code to phone...
Write done... Check now...
Product code : 0599762
[B]Error change... Need use another way...

Чтения бэкапов.

Backup Certificates now...
Backup CRT308 data...
CRT308 Backup Created
SL3 Simlock read ... ok
WMDRM read ... ok
Check communication with phone....
Reboot....
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000030000022600010007600C192102031104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00000C35
EM1 ID: 00000C30
PUBLIC ID: 1140000858D50344F27A9E2B5A76FC23BACD8CA9
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 11.16.0
Processing RAWLOADER...
FLIC : 005000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 11.16.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
ADL: Reading certificates...

Reading NPC certificate...
IMEI : 3569880403ххххх
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Cert Read done!

ADL: Reading certificates done! :)
ADL: Close_Session
Content: 000300000000030000000300000000
ADL: Reboot

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
SimLock Data saved...
SimLock Key saved...
WMDRM_PD Data saved...

RPL saved : c:\InfinityBox\BEST\Backup\Cert\3569880403хххх х.rpl

JayDi

26.05.2011, 11:54

Увы, смена пк на них - сродни разлоку по сложности - долго, нудно и толком не нужно :(

bmw

26.05.2011, 12:24

Версия 1.21 бета не смогла ввести код по юсб в 5230 RM-593, пробовал и из включенного состояния и из локала, с родной симкой и без - никак
Using F-bus count...
Sending code 835408862298470 Level : 7 to SimLock Server...
Simlock Server Answer: Error
Done!

С клавы тело приняло код нормально.

Dood

26.05.2011, 13:04

bmw, Дык, Андрюх, версия 1.22 вышла.

bmw

26.05.2011, 18:00

Дык, Андрюх, версия 1.22 вышла.А что там действительно в бете есть баг с этим?. Тем более что раньше во все остальные модели и в такую же точно версиями постарше вводился код без проблем. :)

JayDi

26.05.2011, 19:05

Зависит от оператора, или модели/версии ПО.
Точно не понятно, но, в 22 версии проблем быть точно не должно с этим.

ivanych79

27.05.2011, 16:54

N97 вод кода по USB

Reading Phone Info....
Connected phone - Nokia N97
Software ver : V ICPR72_09w28.6 09-09-09 RM-505 (c) Nokia
IMEI : 356064033609112
Ape Ver : v 20.0.019
APE Var : v 20.0.01920.0.019.03.0120.0.019.261.01
APE ADSP: 256
DSP Ver : ICPR72_09w26
APE Test: rm505ENO_09w23v0.010
PPM :
CNT : 11.0.021.uda1_001
Product SN : CUC736657
Product code : 0587375
Base Prd.code: 0570816
Module code :
Long Prod.SN : 0
Hardware info=======
HWID : 4001
Retu : 16
Tahvo : 22
Batery: 3630 mV
Camera:
CMT BT:
APE BT: HCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12708.
APE HW: 256
LCDVer:
RF ic :
Lock info ===========
IMEI : 356064033609112
IMEI spNet : 3A 65 60 04 33 06 19 01
IMEI svNet : 33 65 60 04 33 06 19 01 F6

Conf key : 0000000000000000
Provider key : 2320100000000000
Provider : Mobilkom Austria ;Austria
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 2

LOCK STATUS :
=============================
BLK : 1
Lock1:Close
BLK : 2
Lock1:Close
=============================
LOCKS : Closed
=============================
CRT308 Backup Created... :)

User code : Crypted
UserDataExLevel : Low [Gallery]

Done!

Using F-bus count...
Sending code 221844225979148 Level : 7 to SimLock Server...
Simlock Server Answer: Unlock code Accepted! :)
Done!

Reading Phone Info....
Connected phone - Nokia N97
Software ver : V ICPR72_09w28.6 09-09-09 RM-505 (c) Nokia
IMEI : 356064033609112
Ape Ver : v 20.0.019
APE Var : v 20.0.01920.0.019.03.0120.0.019.261.01
APE ADSP: 256
DSP Ver : ICPR72_09w26
APE Test: rm505ENO_09w23v0.010
PPM :
CNT : 11.0.021.uda1_001
Product SN : CUC736657
Product code : 0587375
Base Prd.code: 0570816
Module code :
Long Prod.SN : 0
Hardware info=======
HWID : 4001
Retu : 16
Tahvo : 22
Batery: 3633 mV
Camera:
CMT BT:
APE BT: HCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12708.
APE HW: 256
LCDVer:
RF ic :
Lock info ===========
IMEI : 356064033609112
IMEI spNet : 3A 65 60 04 33 06 19 01
IMEI svNet : 33 65 60 04 33 06 19 01 F6

Conf key : 0000000000000000
Provider key : 2320100000000000
Provider : Mobilkom Austria ;Austria
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 2

LOCK STATUS :
=============================
BLK : 1
Lock1:Open
BLK : 2
Lock1:Open
=============================
LOCKS : All Open
=============================
CRT308 Backup Created... :)

User code : Crypted
UserDataExLevel : Low [Gallery]

Done!

chabrus

28.05.2011, 20:39

6300, повреждена SDD. Вырубался через 3 минуты.

Checking StartUp data ...
-----------------------
SDD Key status : SDData Damaged!!!!! :(
SimLock status : SimLock is Ok
Security status : Security is Ok
-----------------------
Через интерфейс UFS кнопка Check SL/SD/SECURITY не активна.
Через интерфейс USB она работает, но не активны кнопки Repair SDD, Repair SL и Rd key.
Естественно что и авторизация не прошла, ругнувшись на сбитый SD.
ПроблеМа в моих кривых руках, или в том что в программе есть недоработка?
МХкеу, поднял аппарат с одного раза :(

mixanik

28.05.2011, 21:35

всего навсего нужно было нажать Rd KEY , и подождать немного, кнопка Repair SDD станет активной.Другое дело что кнопка Rd key не на всех телефонах у меня была активной через JAF.

JayDi

28.05.2011, 23:38

Гм...
Через UFS все работает. и с 6300 тоже.
SDD - Damaged - Repair SD
SECURITY - SX4+Upload PM
Для чего делать авторизацию при убитом SDD - не понимаю.

chabrus

29.05.2011, 01:42

mixanik после нажатия этой кнопки, ничего не менялось.

JayDi кнопки были действительно не активны, авторизацию делал уже на удачу, методом тыка.
BEST приобрел недовно. Только осваиваю :)

Никто не пробовал в последние дни, проходить авторизацию?
Вчера на 3 разных телефонах по несколько раз пытался пройти, в ответ получаю

Processing Server SX4 Auth
Checking SDD key...
Check SD : Key is Ok
Operating mode is OK, no need change...
Connecting to server...
Connection error, #2 , Server TimeOut
SX4 Auth error :(

Причем на разных телефонах. (все 3 аппарата 6300) Проверьте у кого есть возможность.

komayo

01.06.2011, 13:54

Отлично! Продукт с первого раза через dead mode восстановил RPL:
аппарат C7-00 RM-675
card found: S/N 1B*******
registered to: komyor

Connect phone on selected interface...

Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
SimLock Data found!
SimLock key found!
SuperDongle Key found!
CMLA key found!
WMDRM key found!
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000030000022600010007600C192102031104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001040
EM1 ID: 00001030
PUBLIC ID: 1F500101EC8E0344CEE3910AF2DF65A5325E7FA3
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 11.4.0
Processing RAWLOADER...
FLIC : 006800EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 11.4.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
ADL: Preparing for write certificates...

Erase NPC... Ok
Writing NPC... Ok
Erase CCC... Ok
Writing CCC... Ok
Erase HWC... Ok
Writing HWC... Ok

ADL: Writing Flash certs done! :)

ADL: Close_Session
Content: 000300000000040000000400000000
ADL: Reboot
Wait, reconneting...
Check phone mode...
Phone already in Test mode, skip change...

Writing SimLock Key... Ok!
Writing SimLock Data... Ok!
Writing Super Dongle Key... Ok!

SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!! :(

CMLA key sent... Ok
WMDRM_PD key sent... Ok

Done!

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Reading Phone Info....
Connected phone - Nokia C7-00
Software ver : V 92PS1_10w46.9 01-03-11 RM-675 (c) Nokia
IMEI : 3537550********
Ape Ver : 014.002
APE Var : 014.002.00.01014.002.04.01014.002.00.01
APE ADSP: 256
DSP Ver : TB92PS1_10w46.4
APE Test: rm675_ENO_v_0.0308
PPM :
CNT :
Product SN : 0
Product code : 059B7V7
Base Prd.code:
Module code :
Long Prod.SN : 0
Hardware info=======
HWID :
Retu : 40
Tahvo : 00
Batery: 3790 mV
Camera:
CMT BT:
APE BT: HCI Version 4 (rev. 0). LMP Version 4 (rev. 7455). Manufacturer 13.
APE HW: 256
LCDVer:
RF ic :
Lock info ===========
IMEI : 35375504********
IMEI spNet : 3A 35 57 05 24 73 82 08
IMEI svNet : 33 35 57 05 24 73 82 08 F8

Conf key : 0000000000000000
Provider key : 2440700000000000
Provider : AT&T;U.S.A. (3650)
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 7

LOCK STATUS :
=============================
BLK : 1
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS : All Open
=============================
CRT308 Backup Created... :)

User code : Crypted
UserDataExLevel : Low [Gallery]

Done!

Processing Server SX4 Auth
Checking SDD key...
Check SD : Key is Ok
Operating mode is OK, no need change...
Connecting to server...
Connect to server Ok, checking
SX4 Server : Online, Ready
SX4, processing Step #1
SX4, processing Step #2
SX4, processing Step #3
SX4 Result : Ok

Uploading RF/Battery tune to phone...
Using : RM-675.pm
Operating mode is OK, no need change...

Field 1
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 4 write - Ok
Record 6 write - Ok
Record 7 write - Ok
Record 8 write - Ok
Record 13 write - Ok
Record 15 write - Ok
Record 16 write - Ok
Record 17 write - Ok
Record 18 write - Ok
Record 19 write - Ok
Record 22 write - Ok
Record 26 write - Ok
Record 27 write - Ok
Record 28 write - Ok
Record 29 write - Ok
Record 30 write - Ok
Record 31 write - Ok
Record 32 write - Ok
Record 33 write - Ok
Record 35 write - Ok
Record 36 write - Ok
Record 38 write - Ok
Record 39 write - Ok
Record 40 write - Ok
Record 41 write - Ok
Record 43 write - Ok
Record 44 write - Ok
Record 45 write - Ok
Field 2
Record 0 write - Ok
Field 309
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 3 write - Ok
Record 4 write - Ok
Record 7 write - Ok
Record 17 write - Ok
Field 382
Record 1 write - Ok

Check ST_SECURITY now...
Security status : ST_SECURITY => OK

Done!

Elapsed: 00:00:02

Reading Phone Info....
Connected phone - Nokia C7-00
Software ver : V 92PS1_10w46.9 01-03-11 RM-675 (c) Nokia
IMEI : 35375504*******
Ape Ver : 014.002
APE Var : 014.002.00.01014.002.04.01014.002.00.01
APE ADSP: 256
DSP Ver : TB92PS1_10w46.4
APE Test: rm675_ENO_v_0.0308
PPM :
CNT :
Product SN : 0
Product code : 059B7V7
Base Prd.code:
Module code :
Long Prod.SN : 0
Hardware info=======
HWID :
Retu : 40
Tahvo : 00
Batery: 3797 mV
Camera:
CMT BT:
APE BT: HCI Version 4 (rev. 0). LMP Version 4 (rev. 7455). Manufacturer 13.
APE HW: 256
LCDVer:
RF ic :
Lock info ===========
IMEI : 353755042******
IMEI spNet : 3A 35 57 05 24 73 82 08
IMEI svNet : 33 35 57 05 24 73 82 08 F8

Conf key : 0000000000000000
Provider key : 2440700000000000
Provider : AT&T;U.S.A. (3650)
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 7

LOCK STATUS :
=============================
BLK : 1
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS : All Open
=============================
CRT308 Backup Created... :)

User code : Crypted
UserDataExLevel : Low [Gallery]

Done!

Phone disconected!

Connect phone on selected interface...

AABBCC

01.06.2011, 14:27

Считал с галкой "ALL" RPL с 5800 RM-356. Версия BEST 1.22. ТА был полностью исправен. Вот что в сохранённом RPL:
[CERT_PROG_DATA_OUT_CMT]
SIMLOCK_DATA_1=8ABC96E3CCAF0FABF80E682A7E933E94151 410690000000000000000244070000000000000180700
SIMLOCK_DATA_2=000000000050000005FFFFFF00B4000005F FFFFF0118000005FFFFFF017C000005FFFFFF01E00000
SIMLOCK_DATA_3=05FFFFFF0244000005FFFFFF02A8000005F FFFFF000000007FFF6F07FFFFFFFFF800030C03000503
SIMLOCK_DATA_4=000000007FFF6F3EFFFFFFFFC000030F020 00103000000007FFF6F3FFFFFFFFFC000031102000103
SIMLOCK_DATA_5=000000007FFF6F07FFFFFFFF07FE0313080 00503000000007FFF6F07FFFFFFFF07FE031B08000503
SIMLOCK_DATA_6=000000007FFF6F07FFFFFFFFF8000323030 00503000000007FFF6F3EFFFFFFFFC000032602000103
SIMLOCK_DATA_7=000000007FFF6F3FFFFFFFFFC0000328020 00103000000007FFF6F07FFFFFFFF07FE032A08000503
SIMLOCK_DATA_8=000000007FFF6F07FFFFFFFF07FE0332080 00503000000007FFF6F07FFFFFFFFF800033A03000503
SIMLOCK_DATA_9=000000007FFF6F3EFFFFFFFFC000033D020 00103000000007FFF6F3FFFFFFFFFC000033F02000103
SIMLOCK_DATA_10=000000007FFF6F07FFFFFFFF07FE034108 000503000000007FFF6F07FFFFFFFF07FE034908000503
SIMLOCK_DATA_11=000000007FFF6F07FFFFFFFFF800035103 000503000000007FFF6F3EFFFFFFFFC000035402000103
SIMLOCK_DATA_12=000000007FFF6F3FFFFFFFFFC000035602 000103000000007FFF6F07FFFFFFFF07FE035808000503
SIMLOCK_DATA_13=000000007FFF6F07FFFFFFFF07FE036008 000503000000003F007F206F07FFFFF800036803000503
SIMLOCK_DATA_14=000000003F007F206F3EFFFFC000036B02 000103000000003F007F206F3FFFFFC000036D02000103
SIMLOCK_DATA_15=000000003F007F206F07FFFF07FE036F08 000503000000003F007F206F07FFFF07FE037708000503
SIMLOCK_DATA_16=000000003F007F206F07FFFFF800037F03 000503000000003F007F206F3EFFFFC000038202000103
SIMLOCK_DATA_17=000000003F007F206F3FFFFFC000038402 000103000000003F007F206F07FFFF07FE038608000503
SIMLOCK_DATA_18=000000003F007F206F07FFFF07FE038E08 000503000000003F007F206F07FFFFF800039603000503
SIMLOCK_DATA_19=000000003F007F206F3EFFFFC000039902 000103000000003F007F206F3FFFFFC000039B02000103
SIMLOCK_DATA_20=000000003F007F206F07FFFF07FE039D08 000503000000003F007F206F07FFFF07FE03A508000503
SIMLOCK_DATA_21=FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
SIMLOCK_DATA_22=FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
SIMLOCK_DATA_23=FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
SIMLOCK_DATA_24=FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
SIMLOCK_DATA_25=FFFFFFFF
SIMLOCK_KEY_DATA_1=010000000000E429DCE1A67A5C715A7 4AAAA93DDB718DF80C1E71F7B713C8A297BD23F8A884E4799
SIMLOCK_KEY_DATA_2=297999665BB23C322DBDEF1C791C0D3 9F0F88FF541EC5D5DE2997749C68D4988FC6F442601830E61
SIMLOCK_KEY_DATA_3=9AD3EB63E01E0389C27E4CC0CAF9E93 A9734EF973A94F6ECD7B6DDD9174A56014F46E26B8110ABE8
SIMLOCK_KEY_DATA_4=06F51F0AA6446E5547610F1E436D1D5 23B085F77A608C0BF67669A3F039C09B052B8BBD63D04A367
SIMLOCK_KEY_DATA_5=F2CB3AEB9B7C0000000000000000000 000000000000000000000394B16B5C9FB7694D15DDF6753A5
SIMLOCK_KEY_DATA_6=CD33070D48C0F2496152A9C3ED26F5C 0EF4DAA3A561F25B87F6FF7C4ED477C7F8E7B1CE34E6459EE
SIMLOCK_KEY_DATA_7=DEBFBA0B1E9FDFE31D1501141858A15 94450360C79DFA66FA452BB2329A3E926B01E0BC26BB63F25
SIMLOCK_KEY_DATA_8=CFAF94F45657860403A26F8E12E62C6 37E7391EC65DA53E54A95E2CD2AB1CAB3E27E
WMDRM_PD_DATA_1=A81100003C004400450056004300450052 0054002000760065007200730069006F006E003D002200
WMDRM_PD_DATA_2=31002E00300022003E003C004300450052 0054004900460049004300410054004500200074007900
WMDRM_PD_DATA_3=700065003D002200440045005600490043 00450022003E003C0044004100540041003E003C005500
WMDRM_PD_DATA_4=4E00490051005500450049004400200070 007200690076006100740065003D002200310022003E00
WMDRM_PD_DATA_5=4400310041004100430074005300440041 0046004C005A00540052004A0051006700410070004B00
WMDRM_PD_DATA_6=35002F00460056004400650059003D003C 002F0055004E004900510055004500490044003E003C00
WMDRM_PD_DATA_7=5000550042004C00490043004B00450059 00200070007200690076006100740065003D0022003100
WMDRM_PD_DATA_8=22003E0058003900670058006B005A007A 004D0034007400410070004D0073003500590031004100
WMDRM_PD_DATA_9=68006B0077005900350071004300430046 006C0058005100570041006B004D005600690043006F00
WMDRM_PD_DATA_10=30006C006B006F0046003200480031004 A006B002F0072006D006F00450077003D003D003C002F00
WMDRM_PD_DATA_11=5000550042004C00490043004B0045005 9003E003C004B004500590044004100540041003E005600
WMDRM_PD_DATA_12=49004200380055006C003900300047006 5004100410075003900460061005200480077004E005400
WMDRM_PD_DATA_13=4E0078006E006200350041003D003C002 F004B004500590044004100540041003E003C002F004400
WMDRM_PD_DATA_14=4100540041003E003C004D00530044005 2004D005F005300490047004E0041005400550052004500
WMDRM_PD_DATA_15=5F00560041004C00550045003E0077004 D00500073006A00360033006E006D0072004B006E004500
WMDRM_PD_DATA_16=2F00730035002B00330079005A0034006 3004D0056005A005300350069004A007000450067004200
WMDRM_PD_DATA_17=590075005700630050006C00550036006 B00360076004D006D007A00450041007A002F0052006900
WMDRM_PD_DATA_18=41003D003D003C002F004D00530044005 2004D005F005300490047004E0041005400550052004500
WMDRM_PD_DATA_19=5F00560041004C00550045003E003C005 30059004D005300490047004E0041005400550052004500
WMDRM_PD_DATA_20=3E00630043006C00300048006C0053005 8004E00620068003700620030004700780059007A004200
WMDRM_PD_DATA_21=34005000520049004100740033006F003 D003C002F00530059004D005300490047004E0041005400
WMDRM_PD_DATA_22=5500520045003E003C002F00430045005 200540049004600490043004100540045003E003C004600
WMDRM_PD_DATA_23=41004C004C004200410043004B003E003 C0053004500430055005200490054005900560045005200
WMDRM_PD_DATA_24=530049004F004E003E0032002E0034002 E003100310031002E00360033003C002F00530045004300
WMDRM_PD_DATA_25=550052004900540059005600450052005 30049004F004E003E003C00430045005200540049004600
WMDRM_PD_DATA_26=490043004100540045002000700072006 90076006100740065003D002200310022003E0058003900
WMDRM_PD_DATA_27=670058006B005A007A004D00340074004 10070004D007300350059003100410068006B0077005900
WMDRM_PD_DATA_28=350071004300430046006C00580051005 70041006B004D005600690043006F0030006C006B006F00
WMDRM_PD_DATA_29=46003200480031004A006B002F0072006 D006F00450077004900450062007A002B00660053006200
WMDRM_PD_DATA_30=5700740043006500710050004A005A005 90043007200660036006B006F00450076004D004D003900
WMDRM_PD_DATA_31=37002B00580045003800730075007A003 900770041006E00430056006A0035007500580076005600
WMDRM_PD_DATA_32=4A003400540054004100500061002F003 10067003C002F0043004500520054004900460049004300
WMDRM_PD_DATA_33=4100540045003E003C002F00460041004 C004C004200410043004B003E003C004300450052005400
WMDRM_PD_DATA_34=490046004900430041005400450020007 4007900700065003D002200470052004F00550050002200
WMDRM_PD_DATA_35=3E003C0044004100540041003E003C004 E0041004D0045003E00350038003000300064002D003100
WMDRM_PD_DATA_36=3C002F004E0041004D0045003E000D000 A0020002000200020003C004D0041004E00550046004100
WMDRM_PD_DATA_37=4300540055005200450052003E004E006 F006B00690061003C002F004D0041004E00550046004100
WMDRM_PD_DATA_38=4300540055005200450052003E000D000 A0020002000200020003C004D0041004B0045003E004E00
WMDRM_PD_DATA_39=6F006B00690061003C002F004D0041004 B0045003E000D000A0020002000200020003C0044004900
WMDRM_PD_DATA_40=53005400520049004200550054004F005 2003E004E006F006B00690061003C002F00440049005300
WMDRM_PD_DATA_41=5400520049004200550054004F0052003 E000D000A0020002000200020003C004D004F0044004500
WMDRM_PD_DATA_42=4C003E0052004D002D003300350036003 C002F004D004F00440045004C003E000D000A0020002000
WMDRM_PD_DATA_43=200020003C00530045004300550052004 900540059004C004500560045004C003E00320030003000
WMDRM_PD_DATA_44=30003C002F00530045004300550052004 900540059004C004500560045004C003E000D000A002000
WMDRM_PD_DATA_45=2000200020003C0048004100520044005 7004100520045005F005600450052005F004D0041004A00
WMDRM_PD_DATA_46=4F0052003E0031003C002F00480041005 200440057004100520045005F005600450052005F004D00
WMDRM_PD_DATA_47=41004A004F0052003E000D000A0020002 000200020003C0048004100520044005700410052004500
WMDRM_PD_DATA_48=5F005600450052005F004D0049004E004 F0052003E0030003C002F00480041005200440057004100
WMDRM_PD_DATA_49=520045005F005600450052005F004D004 9004E004F0052003E000D000A0020002000200020003C00
WMDRM_PD_DATA_50=4600490052004D0057004100520045005 F005600450052005F004D0041004A004F0052003E003100
WMDRM_PD_DATA_51=3C002F004600490052004D00570041005 20045005F005600450052005F004D0041004A004F005200
WMDRM_PD_DATA_52=3E000D000A0020002000200020003C004 600490052004D0057004100520045005F00560045005200
WMDRM_PD_DATA_53=5F004D0049004E004F0052003E0030003 C002F004600490052004D0057004100520045005F005600
WMDRM_PD_DATA_54=450052005F004D0049004E004F0052003 E000D000A0020002000200020003C004600450041005400
WMDRM_PD_DATA_55=55005200450053003E000D000A0020002 0002000200020002000200020003C0043004C004F004300
WMDRM_PD_DATA_56=4B003E0031003C002F0043004C004F004 3004B003E000D000A002000200020002000200020002000
WMDRM_PD_DATA_57=20003C004D00450054004500520049004 E0047003E0031003C002F004D0045005400450052004900
WMDRM_PD_DATA_58=4E0047003E000D000A002000200020002 00020002000200020003C004C004900430045004E005300
WMDRM_PD_DATA_59=45005F004100430051003E0031003C002 F004C004900430045004E00530045005F00410043005100
WMDRM_PD_DATA_60=3E000D000A00200020002000200020002 000200020003C004C004900430045004E00530045005F00
WMDRM_PD_DATA_61=530059004E0043003E0031003C002F004 C004900430045004E00530045005F00530059004E004300
WMDRM_PD_DATA_62=3E000D000A00200020002000200020002 000200020003C0045004E00430052005900500054004900
WMDRM_PD_DATA_63=4F004E003E0031003C002F0045004E004 300520059005000540049004F004E003E000D000A002000
WMDRM_PD_DATA_64=20002000200020002000200020003C005 30059004D004D00450054005200490043005F004F005000
WMDRM_PD_DATA_65=54003E0031003C002F00530059004D004 D00450054005200490043005F004F00500054003E000D00
WMDRM_PD_DATA_66=0A0020002000200020003C002F0046004 5004100540055005200450053003E000D000A0020002000
WMDRM_PD_DATA_67=200020003C004C0049004D00490054005 3003E000D000A0020002000200020002000200020002000
WMDRM_PD_DATA_68=3C004D004100580043004800410049004 E00440045005000540048003E0032003C002F004D004100
WMDRM_PD_DATA_69=580043004800410049004E00440045005 000540048003E000D000A00200020002000200020002000
WMDRM_PD_DATA_70=200020003C004D00410058004C0049004 30045004E0053004500530049005A0045003E0031003000
WMDRM_PD_DATA_71=3200340030003C002F004D00410058004 C004900430045004E0053004500530049005A0045003E00
WMDRM_PD_DATA_72=0D000A002000200020002000200020002 00020003C004D0041005800480045004100440045005200
WMDRM_PD_DATA_73=530049005A0045003E003500310032003 0003C002F004D0041005800480045004100440045005200
WMDRM_PD_DATA_74=530049005A0045003E000D000A0020002 000200020003C002F004C0049004D004900540053003E00
WMDRM_PD_DATA_75=3C005000550042004C00490043004B004 50059003E004A006F0074005500570045005A0032005000
WMDRM_PD_DATA_76=34004600660071005400440076004C006 F00610055006300640062006E007700550033006A007A00
WMDRM_PD_DATA_77=6500650030006700680043007A002B005 6006C00440032004400330076004A004200480075006D00
WMDRM_PD_DATA_78=720032007200670077003D003D003C002 F005000550042004C00490043004B00450059003E003C00
WMDRM_PD_DATA_79=2F0044004100540041003E003C004D005 300440052004D005F005300490047004E00410054005500
WMDRM_PD_DATA_80=520045005F00560041004C00550045003 E005200380079004A0078006200610031004B002F006D00
WMDRM_PD_DATA_81=660079004900730031003100570032005 1007A00690033007500360042006A004300510071003200
WMDRM_PD_DATA_82=420053003500330070003000450057004 7007300610048004F00750061002F007100720042006400
WMDRM_PD_DATA_83=6E00470067003D003D003C002F004D005 300440052004D005F005300490047004E00410054005500
WMDRM_PD_DATA_84=520045005F00560041004C00550045003 E003C002F00430045005200540049004600490043004100
WMDRM_PD_DATA_85=540045003E003C0043004500520054004 90046004900430041005400450020007400790070006500
WMDRM_PD_DATA_86=3D00220041005500540048004F0052004 9005A004100540049004F004E0022003E003C0044004100
WMDRM_PD_DATA_87=540041003E003C0053004500430055005 2004900540059004C004500560045004C003E0032003000
WMDRM_PD_DATA_88=300030003C002F0053004500430055005 2004900540059004C004500560045004C003E003C004100
WMDRM_PD_DATA_89=5500540048005F00490044003E0032003 700320033003C002F0041005500540048005F0049004400
WMDRM_PD_DATA_90=3E003C005000550042004C00490043004 B00450059003E0055006D004C00460061004B0068003800
WMDRM_PD_DATA_91=7200330043002B00770072002B0052004 C0047004800620071006100710065006E00480054005500
WMDRM_PD_DATA_92=56005000380057003600630031006C002 F0067006300790059005300500076005000440069004A00
WMDRM_PD_DATA_93=7100640056004100420067003D003D003 C002F005000550042004C00490043004B00450059003E00
WMDRM_PD_DATA_94=3C002F0044004100540041003E003C004 D005300440052004D005F005300490047004E0041005400
WMDRM_PD_DATA_95=5500520045005F00560041004C0055004 5003E006C0036005700650056005900560076002F003400
WMDRM_PD_DATA_96=31007600370059007600320030005A004 B0032005700550038003400380046006900320045003400
WMDRM_PD_DATA_97=67006B007400510073007100710036002 F004E0073004A00310061004D0047003200450045007300
WMDRM_PD_DATA_98=76006A00460051003D003D003C002F004 D005300440052004D005F005300490047004E0041005400
WMDRM_PD_DATA_99=5500520045005F00560041004C0055004 5003E003C002F0043004500520054004900460049004300
WMDRM_PD_DATA_100=4100540045003E003C00430045005200 540049004600490043004100540045002000740079007000
WMDRM_PD_DATA_101=65003D00220041005500540048004F00 520049005A004100540049004F004E005F0052004F004F00
WMDRM_PD_DATA_102=540022003E003C004400410054004100 3E003C0041005500540048005F00490044003E0031003C00
WMDRM_PD_DATA_103=2F0041005500540048005F0049004400 3E003C005000550042004C00490043004B00450059003E00
WMDRM_PD_DATA_104=61003100740033006800780072006700 2100710062004F0067006B0074006E006200590061004500
WMDRM_PD_DATA_105=45006900340074006500430073006500 210067007A00360052007600540050007500430021007A00
WMDRM_PD_DATA_106=69007A004B004A006C00700055003700 78006F0064007500530077003D003D003C002F0050005500
WMDRM_PD_DATA_107=42004C00490043004B00450059003E00 3C002F0044004100540041003E003C004D00530044005200
WMDRM_PD_DATA_108=4D005F005300490047004E0041005400 5500520045005F00560041004C00550045003E0046003500
WMDRM_PD_DATA_109=45007A004E0046006C0077004F007100 6B0062004B0057006B002B006E00620065007A006C004100
WMDRM_PD_DATA_110=6C0031006A006D0049007A0067006100 6C006800460068004E003400610070005A0041006D006100
WMDRM_PD_DATA_111=2B006700660038006C00410075005900 69005A00430067003D003D003C002F004D00530044005200
WMDRM_PD_DATA_112=4D005F005300490047004E0041005400 5500520045005F00560041004C00550045003E003C002F00
WMDRM_PD_DATA_113=43004500520054004900460049004300 4100540045003E003C002F00440045005600430045005200
WMDRM_PD_DATA_114=54003E00

Это нормально? Такой и должен быть считаный BEST-ом RPL?

JayDi

01.06.2011, 14:45

CLMA / SDD не декриптуется, так, как их можно отрепайрить. Будет времени свободного побольше - будут и они бэкапиться.
Для чтения никакие галки не нужны. Оно читает все, что может. Для RAPIDO по USB NPC/CCC/HWC пока не читается, но, скоро будет.

chabrus, инет какой? по идее вторая ошибка означает, что до сервера достучались, а после произошел разрыв соединения.

AABBCC

01.06.2011, 18:21

renat_d

01.06.2011, 18:42

Слишком громкое название у кнопки "Read RPL", при том что BEST не может вычитать самое главное в TA SL2, это NPC, и при том что NPC из 5800 могут без проблем вычитать большинство продуктов (UFS, MT, Cyclone, MX). Просто из-за того, что слепо доверился BEST, попал сейчас на RPL. Не проверил то, что вычитал BEST из TA и стёр его. В головы не могло даже прийти, что NPC не будет вычитан при использовании функции READ RPL с галкой "All". Какой толк от этой кнопки, совсем не ясно.

Для RAPIDO по USB NPC/CCC/HWC пока не читается, но, скоро будет.
.

Если столько продуктов то почему бы не сохранить бекапы всеми ими ? Это как бы внегласное золотое правило ! Ну и логи естестенно надо тоже просматривать , и сами бекапы.

PS я для чего вы его стирали ? Он что не включался?

BEST отличный продукт :appl:

chabrus

01.06.2011, 19:23

JayDi интернет слабый. 115 килобит.
Сегодня проверил, работает.

JayDi

02.06.2011, 04:22

AABBCC, какой продукт его считает по USB с RAPIDO?????? Скажу - никакой. По фбас читается все, что нужно. Про USB и данные телефоны - Русским, Понятным языком объяснил. При чтении пишется - тип RPL - SIM - значит, что там нет ничего из NPC/CCC/HWC. CRT - значит что там только NPC/CCC/HWC. imei.rpl - значит, что там есть все, что необходимо. И еще в логе пишется что и как прочитано. Разве трудно смотреть в лог? И разве не заметно - что кнопка Read RPL находится в другом блоке? Не нужно ничего выбирать - читает всЕ, что может.
Слепо доверяться и прочее - используйте другие продукты, может там все круче и лучше, не знаю. Ничего в текущем варианте менять не собираюсь. Программа все ясно пишет.

bmw

02.06.2011, 16:51

БЕСТ с 7230 через УФС вообще хоть как-то работает?
Подключаю к уфсу - локал есть. Бест его не видит в упор, жму Check, получаю такое:
1st boot Ok, C0

CMT part info :
CMT ASICID : 000000010000022600000001020C192102044100
CMT EM0 ID : 00001040
CMT EM1 ID : 00001030
CMT PUB ID : 27C0020E059D544089B3D61D1D54463E4E4E6C56
CMT MODE ID : 00
CMT R_HASH : 7B045400E1752022F9EB80B0DEA9C65D
CMT ROM ID : 67E82268F29CEA60

CMT : Sending 2nd loader...
Use : RAP3Gv4_2nd.fg , Rev : 0.0 Ver : 1.42.0
Error : 2nd boot not accepted
RX : F372C007011500000000
После этого опять локал, но бест упорно не видит телефон.

Не вытаскивая кабеля, выключаю Бест, запускаю софт уфса:
MCU SW : V 09.83 21-09-10 RM-604 (c) Nokia
PPM SW : V 09.83 21-09-10 RM-598 (c) Nokia I
Product : Nokia 7230
Prd.Code: 0590228
Bpr.Code: 0585700
Prod.Sn : DKO997061
HW Vers : 1000
EM GAZOO: 40
EM PEARL: 00
RFIC Ver: |Vapaus_5.1 | Mikki_1.1
DSP Vers: ICPR91_10w19_1
LCD Type: SEIKO
CAM Prim: NI00IIIIRR0301035420_003010
IMEI : 355365-04-хххххх-х
SL Serv : SIMLOCK SERVER
SL Conf : 214-01-00000000000
SL Prof : 8000000000000000
SL Count: 00 00
BLK1= L1: CLOS
Provider: Vodafone / Airtel Movil;Spain

Феникс кей его читает, но при попытке считать лог второй бут не проходит:
Powering on the phone
Reading phone info
Product type: RM-604
MCU SW Version:
V 09.83
21-09-10
RM-604
(c) Nokia
PPM Version:
V 09.83
21-09-10
RM-598
(c) Nokia
I
Content Pack Version:
Content: i_0590228
V 09.83
21-09-10
RM-604
(c) Nokia
Imei: 355365040455923
Product code: 0590228
Simlock status:
Profile bits: 8000000000000000
Config key: 2140100000000000
Fbus codes typed: 0
Key codes typed: 0
Block 1:
Lock 1: CLOSED(IMSI); TYPE: 5; DATA: 21 40 1F

Looking for flash files
Flash files found for selected product
Job's finished successfully!

SL3 Unlocking started
Setting flash mode
Reading CMT boot data...

CMT Boot Data
--------------
Asic ID : 000000010000022600000001020C192102044100
Public ID : 27C0020E059D544089B3D61D1D54463E4E4E6C56
Hash : 7B045400E1752022F9EB80B0DEA9C65D
Hardware ID: 020C192102044100

Sending 2ND...
Cannot initialize booting 2ND
Job's finished with errors!

МТ-бокс тем же кабелем с него инфо читает, но не бутит вообще.
Что не нравится бесту? Нужен какой-то спецкабель? Вообще какой-то продукт реально читает из этого гавна лог для локального брутфорса?

JayDi

02.06.2011, 16:56

С нормальным кабелем - работает.

bmw

02.06.2011, 17:16

С нормальным кабелем - работает.Нашёл проблему в кабеле, но вычитать лог для брутфорса не получается:
Phone found!
Series 40 Device detected!
read info... - Ok

Check client version...
Compatible: 1.20.0. or higer...
Upload Job procedure started...

Phone Imei: 3553650404ххххх
Checking locks...
Checking locks...
Conf key : 8000000000000000
Provider key : 2140100000000000
Provider : Vodafone / Airtel Movil;Spain
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 1

LOCK STATUS :
=============================
BLK : 1
Lock1:Close
=============================
LOCKS : Closed
=============================
PA_SL3 phone detected...
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000010000022600000001020C192102044100
CMT EM0 ID : 00001040
CMT EM1 ID : 00001030
CMT PUB ID : 27C0020E059D544089B3D61D1D54463E4E4E6C56
CMT MODE ID : 00
CMT R_HASH : 7B045400E1752022F9EB80B0DEA9C65D
CMT ROM ID : 67E82268F29CEA60

CMT : Sending 2nd loader...
Use : RAP3Gv4_2nd.fg
Init service mode fail :(
Upload Job fail...!

JayDi

02.06.2011, 17:18

Версия 1.22 ? Странно, должен показывать данные ключа при чтении. Их можно вручную вбить в special.log и далее с тушкой по USB работать.
Сделайте просто RdKey.

bmw

02.06.2011, 17:33

Версия 1.22 ? Странно, должен показывать данные ключа при чтении. Их можно вручную вбить в special.log и далее с тушкой по USB работать.
Сделайте просто RdKey.Да, версия 1,22. Не получается считать ключ, не бутит никак :(
1st boot Ok, C0

CMT part info :
CMT ASICID : 000000010000022600000001020C192102044100
CMT EM0 ID : 00001040
CMT EM1 ID : 00001030
CMT PUB ID : 27C0020E059D544089B3D61D1D54463E4E4E6C56
CMT MODE ID : 00
CMT R_HASH : 7B045400E1752022F9EB80B0DEA9C65D
CMT ROM ID : 67E82268F29CEA60

CMT : Sending 2nd loader...
Use : RAP3Gv4_2nd.fg
Read fail...!

JayDi

02.06.2011, 17:50

Опять кабель.
Долго мучился с 7230. После того, как переделал кабель - проблемы исчезли.
Так думаю в ближайшее время по USB все будет, так что проблем будет чуток меньше.

bmw

02.06.2011, 18:00

Опять кабель.
Долго мучился с 7230. После того, как переделал кабель - проблемы исчезли.
Так думаю в ближайшее время по USB все будет, так что проблем будет чуток меньше.Какая же ему схема кабеля нужна? уже 2 схемы пробовал, со второй вообще бута нет.

ivanych79

02.06.2011, 18:05

Какая же ему схема кабеля нужна? уже 2 схемы пробовал, со второй вообще бута нет.

Было у меня такая же проблема пока не переделал по этой схеме.

bmw

02.06.2011, 18:41

Вах!! Она!:appl:
1st boot Ok, C0

CMT part info :
CMT ASICID : 000000010000022600000001020C192102044100
CMT EM0 ID : 00001040
CMT EM1 ID : 00001030
CMT PUB ID : 27C0020E059D544089B3D61D1D54463E4E4E6C56
CMT MODE ID : 00
CMT R_HASH : 7B045400E1752022F9EB80B0DEA9C65D
CMT ROM ID : 67E82268F29CEA60

CMT : Sending 2nd loader...
Use : RAP3Gv4_2nd.fg
rap= 27C0020E059D544089B3D61D1D54463E4E4E6C56
hash= 7B045400E1752022F9EB80B0DEA9C65D
key= 94ABBB0FB97C83FDB65C820D2FB82F52FABB113C

Init Service mode... Wait...

Key file updated...
Done!

leomin

03.06.2011, 12:18

Запись заводского RPL в X3-02 RM-639, версия BEST 1.22 интерфейс USB

Connect phone on selected interface...

Will Write RPL keys now...
Check RPL file...
NMP RPL Detected, converting...
Convert done!
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
SimLock Data found!
SimLock key found!
SuperDongle Key found!
WMDRM key found!
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000030000022600010007600C192102031104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001051
EM1 ID: 00001060
PUBLIC ID: 14F0010273D30344D77A1961BB4B59B940F1AB98
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 11.16.0
Processing RAWLOADER...
FLIC : 003000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 11.16.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:03
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
ADL: Preparing for write certificates...

Erase NPC... Ok
Writing NPC... Ok
Erase CCC... Ok
Writing CCC... Ok
Erase HWC... Ok
Writing HWC... Ok

ADL: Writing Flash certs done! :)

ADL: Close_Session
Content: 000300000000010000000100000000
ADL: Reboot
Wait, reconneting...
Check phone mode...
Phone already in Test mode, skip change...

Writing SimLock Key... Error!
Writing SimLock Data... Error!
Writing Super Dongle Key... Ok!

SDD Key status : SD Data is Ok
SimLock status : SimLock Damaged!!!!! :(
Security status : Security Damaged!!!!! :(

WMDRM_PD key sent... Ok

Done!

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Phone disconected!

Connect phone on selected interface...

Will Write RPL keys now...
Check RPL file...
NMP RPL Detected, converting...
Convert done!
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
SimLock Data found!
SimLock key found!
SuperDongle Key found!
WMDRM key found!
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000030000022600010007600C192102031104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001051
EM1 ID: 00001060
PUBLIC ID: 14F0010273D30344D77A1961BB4B59B940F1AB98
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 11.16.0
Processing RAWLOADER...
FLIC : 003000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 11.16.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:04
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
ADL: Preparing for write certificates...

ADL: Writing Flash certs done! :)

ADL: Close_Session
Content: 000300000000010000000100000000
ADL: Reboot
Wait, reconneting...
Check phone mode...
Phone already in Test mode, skip change...

Writing SimLock Key... Ok!
Writing SimLock Data... Ok!

SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!! :(

Done!

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Processing Server SX4 Auth
Checking SDD key...
Check SD : Key is Ok
Operating mode is OK, no need change...
Connecting to server...
Connect to server Ok, checking
SX4 Server : Online, Ready
SX4, processing Step #1
SX4, processing Step #2
SX4, processing Step #3
SX4 Result : Ok

Uploading RF/Battery tune to phone...
Using : RM-639.pm
Operating mode is OK, no need change...

Field 1
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 4 write - Ok
Record 6 write - Ok
Record 7 write - Ok
Record 8 write - Ok
Record 13 write - Ok
Record 15 write - Ok
Record 16 write - Ok
Record 17 write - Ok
Record 18 write - Ok
Record 19 write - Ok
Record 22 write - Ok
Record 26 write - Ok
Record 27 write - Ok
Record 28 write - Ok
Record 29 write - Ok
Record 30 write - Ok
Record 31 write - Ok
Record 32 write - Ok
Record 33 write - Ok
Record 35 write - Ok
Record 36 write - Ok
Record 38 write - Ok
Record 39 write - Ok
Record 40 write - Ok
Record 41 write - Ok
Record 43 write - Ok
Record 44 write - Ok
Record 45 write - Ok
Field 2
Record 0 write - Ok
Field 309
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 3 write - Ok
Record 4 write - Ok
Record 7 write - Ok
Record 17 write - Ok

Check ST_SECURITY now...
Security status : ST_SECURITY => OK

Done!

Elapsed: 00:00:01

Reading Phone Info....
Connected phone - Nokia X3-02
Software ver : V 06.00 28-03-11 RM-639 (c) Nokia
IMEI : 355************
Ape Ver :
APE Var :
APE ADSP:
DSP Ver : 92_MP2.3_5.96
APE Test:
PPM : V 06.00 28-03-11 RM-639 (c) Nokia I
CNT : Content: i_0598452 V 06.00 28-03-11 RM-639 (c) Nokia
Product SN : 0
Product code :
Base Prd.code:
Module code :
Long Prod.SN : 0
Hardware info=======
HWID :
Retu : 51
Tahvo : 00
Batery: 3853 mV
Camera:
CMT BT: 4217-v610
APE BT:
APE HW:
LCDVer: TPO
RF ic :
Lock info ===========
IMEI : 355************
IMEI spNet : 3A 55 69 03 54 33 50 08
IMEI svNet : 33 55 69 03 54 33 50 38 F3

Conf key : 0000000000000000
Provider key : 2440700000000000
Provider : AT&T;U.S.A. (3650)
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 7

LOCK STATUS :
=============================
BLK : 1
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS : All Open
=============================
CRT308 Backup Created

User code : Crypted
MMC pwd : no any record found
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery]

Done!

Phone disconected!

Connect phone on selected interface...
SimLock зона прописалась со второго раза.

JayDi

03.06.2011, 12:30

Да, такое может быть, писал об этом. Проблема в том, что после бутинга телефон некоторое время может не отвечать на команды. Поэтому иногда достаточно просто прописать RPL когда телефон в локале.

ildar

03.06.2011, 13:33

rm-243 Connected phone - Nokia 6230i

Reading Phone Info....
Connected phone - Nokia 6230i
Software ver : Vp 03.45 03-04-07 RM-243 (c) Nokia
IMEI : 12345610654321?
Ape Ver : 06.51
APE Var : rofs_version_inforofx_version_info
APE ADSP: 256
DSP Ver : pb06w41v34.3_rm243
APE Test: rm243_ENO_x_2007wk24v0.01
PPM :
CNT :
Product SN : 0
Product code :
Base Prd.code:
Module code :
Long Prod.SN : 0
Hardware info=======
HWID :
Retu : 15
Tahvo : 22
Batery: 4697 mV
Camera:
CMT BT:
APE BT:
APE HW: 256
LCDVer:
RF ic : 17141714
Lock info ===========
IMEI : 12345610654321?
IMEI spNet :
IMEI svNet :

Unable to read Lock table... :(
User Code : 12345
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery]

Done!

(rm-243=Nokia 6120c) Ошибка в INI файле?

Repair SL procedure started...

Phone Imei: 356252015409722
Key file exists, no need to read...
Operating mode is OK, no need change...
Writing SimLock Data... Ok
Writing SimLock Key... Ok
Done!

Checking StartUp data ...
-----------------------
SDD Key status : SD Data is Ok
SimLock status : Can't get status
Security status : Security is Ok

SimLock status : Can't get status это нормально?

Gatin

03.06.2011, 14:13

такое ощушение что его не правильно толи стерли, толи зашили.
Опятьже imei в 123 если нет бекапов то RPL.

ildar

03.06.2011, 14:48

Это лог после восстановление бекапов, как видно по логу IMEI на месте и ТА принимает SIM-ку просто хотел уточнит это ошибка в проге или .......?
Repair SL procedure started...

Phone Imei: 356252015409722
Key file exists, no need to read...
Operating mode is OK, no need change...
Writing SimLock Data... Ok
Writing SimLock Key... Ok
Done!

Checking StartUp data ...
-----------------------
SDD Key status : SD Data is Ok
SimLock status : Can't get status
Security status : Security is Ok

вот полный лог восстановления
Phone found!
Series 60 Device detected!
read info... - Ok

Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000010000022600010006400C192101021103
CMT EM0 ID : 00000295
CMT EM1 ID : 00000B22
CMT PUB ID : 1240010F07660058DEBD0203C0C2C3D99CB2C472
CMT MODE ID : 00
CMT R_HASH : CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT ROM ID : A8C1D6713E691FF8

CMT : Sending 2nd loader...
Use : RAPIDOv11_2nd.fg , Rev : 0.0 Ver : 1.37.1
CMT Loader sent, Boot Ok
MCU Configuration
MCU Cfg Ok , 03
FLASHID : 003000EC , CMT , NAND
CMT Flash ID : 003000EC < SAMSUNG [SEC] => K5W1G13ACB
FLCNT : 00030000000000000000000000000000000000
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAPIDOv11_algo.fg , Rev : 0.0 Ver : 1.40.0
CMT Algo sent
CMT PAPUB : 0FE1BA92D924A658E4800780FA6F4868100AC9475A
Transmission mode : Dual (Ddr, TX2)

Boot Done!

Preparing for write certificates...

Switching to CMT...

CMT : NPC erase Ok
Writing NPC... Ok

CMT : CCC erase Ok
Writing CCC... Ok

CMT : HWC erase Ok
Writing HWC... Ok

Done!

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Read Uniq key data started...

Phone Imei: 356252015409722
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000010000022600010006400C192101021103
CMT EM0 ID : 00000295
CMT EM1 ID : 00000B22
CMT PUB ID : 1240010F07660058DEBD0203C0C2C3D99CB2C472
CMT MODE ID : 00
CMT R_HASH : CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT ROM ID : A8C1D6713E691FF8

CMT : Sending 2nd loader...
CMT Loader sent, Boot Ok
rap= 1240010F07660058DEBD0203C0C2C3D99CB2C472
hash= CAEEBB65D3C48E6DC73B49DC5063A2EE
key= 9A4EB8C57D5B7AD2FD0F42CF74F337A496E068E6

Init Service mode... Wait...

Key file updated...
Done!

Checking StartUp data ...
-----------------------
SDD Key status : SDData Damaged!!!!! :(
SimLock status : Can't get status
Security status : Security is Ok
-----------------------

PA_SimLock Version :
PA_SL phone detected

Done!

Repair SD procedure started...

Phone Imei: 356252015409722
Key file exists, no need to read...
Operating mode is OK, no need change...
Writing Super Dongle Key... Ok
Done!

Repair SL procedure started...

Phone Imei: 356252015409722
Key file exists, no need to read...
Operating mode is OK, no need change...
Writing SimLock Data... Ok
Writing SimLock Key... Ok
Done!

Checking StartUp data ...
-----------------------
SDD Key status : SD Data is Ok
SimLock status : Can't get status
Security status : Security Damaged!!!!! :(
-----------------------

PA_SimLock Version :
PA_SL2 phone detected

Done!

Local SX4 procedure started...

Phone Imei: 356252015409722
Key file exists, no need to read...
Step 1...
Step 2...
Step 3...
SX4 Auth - Ok
Upload PM checked
Uploading RF/Battery tune to phone...
Using : RM-243.pm
Operating mode is OK, no need change...

Field 1
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 4 write - Ok
Record 5 write - Ok
Record 6 write - Ok
Record 8 write - Ok
Record 13 write - Ok
Record 15 write - Ok
Record 16 write - Ok
Record 18 write - Ok
Record 20 write - Ok
Record 22 write - Ok
Record 23 write - Ok
Record 24 write - Ok
Record 25 write - Ok
Record 26 write - Ok
Record 27 write - Ok
Record 28 write - Ok
Record 29 write - Ok
Record 31 write - Ok
Record 33 write - Ok
Record 34 write - Ok
Record 40 write - Ok
Record 41 write - Ok
Record 42 write - Ok
Record 43 write - Ok
Record 44 write - Ok
Record 46 write - Ok
Field 309
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 4 write - Ok
Record 5 write - Ok
Record 7 write - Ok
Record 8 write - Ok
Record 17 write - Ok

Check ST_SECURITY now...
Security status : ST_SECURITY => OK

Done!

Elapsed: 00:00:01

Upload done

Checking StartUp data ...
-----------------------
SDD Key status : SD Data is Ok
SimLock status : Can't get status
Security status : Security is Ok
-----------------------

JayDi

03.06.2011, 16:01

Нет, это телефон так прет. Программа берет Internal name из телефона.

NeOnyx

04.06.2011, 06:51

Доброго времени суток, собственно жутко интересуют два вопроса:

1. Когда добавят новые загрузчики (а лучше чтоб всё было по интерфейсу USB)
2. Когда переработают работу с JAF (так как большинство функций не доступно, такие как восстановление SL, SD и т.п., и может ли влиять версия бокса, на данный момент версия стоит 01.B6)

Заранее спасибо за любые вопросы.
С Уважением к команде.

JayDi

04.06.2011, 07:45

1. Гм, как бы USB и так работает с новыми загрузчиками, причем выжимаем все, что можно из него и даже больше. Если про анлок/репайр - это другой вопрос.
2. SD/SL репайр/Unlock/Send NCK работают для JAF'a с 1.22.

ildar

04.06.2011, 08:22

Нет, это телефон так прет. Программа берет Internal name из телефона.

Да и правда :wow:
UFS лог

MCU SW : Vp 03.45 03-04-07 RM-243 (c) Nokia
Product : Nokia 6230i
Prd.Code:
Bpr.Code:
Mod.Code:
Prod.Sn : 0
EM VILMA: 15
EM BETTY: 22
RFIC Ver: 17141714
DSP Ver : pb06w41v34.3_rm243
BT Id : 00 1B AF 54 8C 6C
IMEI : 356252-01-540972-2
SL Conf : 244-07-00000000000
SL Prof : 0000000000000000
SL Count: 00 00
BLK1= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN
BLK2= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN
BLK3= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN
BLK4= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN
BLK5= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN
BLK6= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN
BLK7= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN
Provider: Nokia Test;Finland

а можно как то изменит? (так для себя) РМ пролил не помогло

JayDi

04.06.2011, 08:50

Best'ом слейте РР с рабочего телефона и влейте в данный. Должно отпустить.

ildar

04.06.2011, 08:57

Best'ом слейте РР с рабочего телефона и влейте в данный. Должно отпустить.

Камрады если есть у кого данный модель (rm-243) в руках слейте и выложите РР

Plazmatics

04.06.2011, 10:55

В архиве два разных Product Profile.

AABBCC

07.06.2011, 16:36

BEST 1.22, USB, RM-356 чтение инфы, PA_SL3 phone detected, кноака Unlock SL1/SL2 не активна.
Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Reading Phone Info....
Connected phone - Nokia 5800 XpressMusic
Software ver : V ICPR72_10w04.5 22-03-10 RM-356 (c) Nokia
IMEI : 353382044хххххх
Ape Ver : V 50.0.005
APE Var : V 50.0.005V 50.0.005 50.0.005.230.08
APE ADSP: 256
DSP Ver : ICPR72_10w05
APE Test: eno_version
PPM :
CNT : 50.0.005_004_U230
Product SN : MNH545502
Product code : 0576051
Base Prd.code: 0584488
Module code : 0203558
Long Prod.SN : 0
Hardware info=======
HWID : 1110
Retu : 16
Tahvo : 22
Batery: 3640 mV
Camera:
CMT BT:
APE BT: HCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12708.
APE HW: 256
LCDVer:
RF ic :
Lock info ===========
IMEI : 353382044хххххх
IMEI spNet : 3A 35 83 02 44 87 72 00
IMEI svNet : 33 35 83 02 44 87 72 60 F0

Conf key : 8000000000000000
Provider key : 2680100000000000
Provider : Vodafone / Yorn;Portugal
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 1

LOCK STATUS :
=============================
BLK : 1
Lock1:Close
=============================
LOCKS : Closed
=============================
CRT308 Backup Created

User code : Crypted
UserDataExLevel : Low [Gallery]

Done!

Checking StartUp data ...
-----------------------
SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security is Ok
-----------------------

PA_SimLock Version :
PA_SL3 phone detected

Done!

Phone disconected!

BEST 1.22, F-BUS-UFS, RM-356 чтение инфы, PA_SL3 phone detected , кноака Unlock SL1/SL2 не активна.
Connect phone on selected interface...

UFS S/N 4ххххх boot - Ok

Connect phone on selected interface...

Read and Check phone data...
BB5 bus checking...
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000010000022600010006400C192101031103
CMT EM0 ID : 00000296
CMT EM1 ID : 00000B22
CMT PUB ID : 1C60001062970052C86D1F9BF20488156452FCD8
CMT MODE ID : 00
CMT R_HASH : CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT ROM ID : 4B9B75103E691FF8

CMT : Sending 2nd loader...
Use : RAPIDOv11_2nd.fg , Rev : 0.0 Ver : 1.37.1
CMT Loader sent, Boot Ok
MCU Configuration
MCU Cfg Ok , 03
FLASHID : 00400020 , CMT , NOR
CMT Flash ID : 00400020 < ST => M39BORBOAD
FLCNT : 000000A5EA09FE4FF7FE8BAEFAB083CE158FB0
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAPIDOv11_algo.fg , Rev : 0.0 Ver : 1.40.0
CMT Algo sent
CMT PAPUB : 76A20187051C30162EE91C77AE5E6011F5F1BA6190
Transmission mode : Dual (Ddr, TX2)

Boot Done!

PrReq : NOR , 00
PrReq : NAND , 000300000000000000000000000000

Init Service mode... Wait...

SimLock status : SimLock is Ok
Security status : Security is Ok
SDD Key status : SD Data is Ok

PA_SimLock Version :
PA_SL3 phone detected

Done!

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Checking StartUp data ...
-----------------------
SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security is Ok
-----------------------

PA_SimLock Version :
PA_SL3 phone detected

Done!

Cyclone SL2 Unlock:
BB5 Unlock Started...
MCU Version V ICPR72_10w04.5
MCU Date 22-03-10
Product RM-356 (Nokia 5800 XpressMusic)
Manufacturer (c) Nokia
IMEI 353382044хххххх
Mastercode 643751456
Simlock Server SIMLOCK SERVER
Simlock Key 2680100000000000
Simlock Profile 8000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: CLOSED Type: MCC-MNC Data: 26801F
Reading Security Block...
Security block OK and saved to "RM-356_353382044хххххх_07.06.2011_155531.Securi tyBlock.PM"
"1C60001062970052C86D1F9BF20488156452FCD8.C0003449" Exists, That is good...
Checking for Rootkey Hash support with selected Unlock Method...
Selected Unlock Method: RPL Calculation
Asking box to calculate RPL...
Received RPL from Box OK!
Writing Simlock...
Simlock ACCEPTED OK !
MCU Version V ICPR72_10w04.5
MCU Date 22-03-10
Product RM-356 (Nokia 5800 XpressMusic)
Manufacturer (c) Nokia
IMEI 353382044хххххх
Mastercode 643751456
Simlock Server SIMLOCK SERVER
Simlock Key 2440700000000000
Simlock Profile 8000000000000006
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [1,2] State: OPENED Type: GID Data: FFFF
Simlock [1,3] State: OPENED Type: GID Data: FFFF
Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [2,2] State: OPENED Type: GID Data: FFFF
Simlock [2,3] State: OPENED Type: GID Data: FFFF
Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [3,2] State: OPENED Type: GID Data: FFFF
Simlock [3,3] State: OPENED Type: GID Data: FFFF
Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [4,2] State: OPENED Type: GID Data: FFFF
Simlock [4,3] State: OPENED Type: GID Data: FFFF
Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [5,2] State: OPENED Type: GID Data: FFFF
Simlock [5,3] State: OPENED Type: GID Data: FFFF
Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [6,2] State: OPENED Type: GID Data: FFFF
Simlock [6,3] State: OPENED Type: GID Data: FFFF
Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [7,2] State: OPENED Type: GID Data: FFFF
Simlock [7,3] State: OPENED Type: GID Data: FFFF
Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Unlock finished! Time taken 3.718s
5800 Успешно разлочен, сейчас работет.

BEST отличный продукт :appl:
Чтение инфы BEST-ом после анлока Cyclon-ом, TA стал SL2.
Connect phone on selected interface...

Read and Check phone data...
BB5 bus checking...
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000010000022600010006400C192101031103
CMT EM0 ID : 00000296
CMT EM1 ID : 00000B22
CMT PUB ID : 1C60001062970052C86D1F9BF20488156452FCD8
CMT MODE ID : 00
CMT R_HASH : CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT ROM ID : 4B9B75103E691FF8

CMT : Sending 2nd loader...
Use : RAPIDOv11_2nd.fg , Rev : 0.0 Ver : 1.37.1
CMT Loader sent, Boot Ok
MCU Configuration
MCU Cfg Ok , 03
FLASHID : 00400020 , CMT , NOR
CMT Flash ID : 00400020 < ST => M39BORBOAD
FLCNT : 0000000276DC3DBF2E9D6BC124EEC5C9DCDBC0
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAPIDOv11_algo.fg , Rev : 0.0 Ver : 1.40.0
CMT Algo sent
CMT PAPUB : 76A20187051C30162EE91C77AE5E6011F5F1BA6190
Transmission mode : Dual (Ddr, TX2)

Boot Done!

PrReq : NOR , 00
PrReq : NAND , 000300000000000000000000000000

Init Service mode... Wait...

SimLock status : SimLock is Ok
Security status : Security is Ok
SDD Key status : SD Data is Ok

PA_SimLock Version :
PA_SL2 phone detected

Done!

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Reading Phone Info....
Connected phone - Nokia 5800 XpressMusic
Software ver : V ICPR72_10w04.5 22-03-10 RM-356 (c) Nokia
IMEI : 353382044xxxxxx
Ape Ver : V 50.0.005
APE Var : V 50.0.005V 50.0.005 50.0.005.230.08
APE ADSP: 256
DSP Ver : ICPR72_10w05
APE Test: eno_version
PPM :
CNT : 50.0.005_004_U230
Product SN : MNH545502
Product code : 0576051
Base Prd.code: 0584488
Module code : 0203558
Long Prod.SN : 0
Hardware info=======
HWID : 1110
Retu : 16
Tahvo : 22
Batery: 4232 mV
Camera:
CMT BT:
APE BT:
APE HW: 256
LCDVer:
RF ic : 17141716
Lock info ===========
IMEI : 353382044xxxxxx
IMEI spNet :
IMEI svNet :

Conf key : 8000000000000006
Provider key : 2440700000000000
Provider : AT&T;U.S.A. (3650)
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 7

LOCK STATUS :
=============================
BLK : 1
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS : All Open
=============================
User code : Crypted
UserDataExLevel : Low [Gallery]

Done!

Aristotelos

08.06.2011, 15:36

Респект команде ни Cyclone ни MT не проливали коректно RPL в Е-52 RM-469!!!
Лог Cyclone:
Box_CycloneBox.fpsx
RPL Looks good, decrypting...
Parsing decrypted RPL...
Processing FBUS Part...
Sending User Abort Signal...
Phone not detected at USB -> User Abort
Failed to Write RPL File -> Phone not detected
RPL Looks good, decrypting...
Parsing decrypted RPL...
Processing FBUS Part...
Writing Simlock...
Handling as SL1/SL2 Simlock Data
Simlock NOT ACCEPTED !
Writing Superdongle key...
Superdongle Key ACCEPTED OK !
Writing CMLA key...
CMLA Key NOT ACCEPTED !
Writing WMDRM PD Data...
WMDRM PD Data NOT ACCEPTED !
Processing FLASHBUS Part...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102011104
CMT_EM_ASIC_ID: 00001040
CMT_EM_ASIC_ID: 00001030
CMT_PUBLIC_ID: 2BA001127D400E4951746744C50DF4F3FEBE1FBB
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 25B977A055BE9B5DEC0C38A2A279C695
CMT_BOOT_ROM_CRC: 3E273BF6
CMT_SECURE_ROM_CRC: 37BE26FA
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.11.16.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0020004000000031, ST, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x0020004000000031, ST, ONENAND
Requested Algorithm: XSR 1.6 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
RAPUv11_XSR17_alg.fg, Type: Algorithm, Rev: 768.11.16.0, Algo: XSR 1.6
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 85F252E351E225CAFC4DFBC8041EABD2823E3500
APE Subsystem Not Found
Flashbus Write baud set to 5.0Mbits
CMT NPC Erased
CMT NPC Written
CMT HWC Erased
CMT HWC Written
CMT CCC Erased
CMT CCC Written
Restarting MCU...
Processing FBUS Part...
Writing Simlock...
Handling as SL1/SL2 Simlock Data
Simlock NOT ACCEPTED !
Writing Superdongle key...
Superdongle Key ACCEPTED OK !
Writing CMLA key...
CMLA Key NOT ACCEPTED !
Writing WMDRM PD Data...
WMDRM PD Data NOT ACCEPTED !
Processing FLASHBUS Part...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102011104
CMT_EM_ASIC_ID: 00001040
CMT_EM_ASIC_ID: 00001030
CMT_PUBLIC_ID: 2BA001127D400E4951746744C50DF4F3FEBE1FBB
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 25B977A055BE9B5DEC0C38A2A279C695
CMT_BOOT_ROM_CRC: 3E273BF6
CMT_SECURE_ROM_CRC: 37BE26FA
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.11.16.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
If software STUCK HERE with box TX LED lit, that means:
1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
2. Your cable is not TX2 Enabled!
3. Transmission error occured, try again
In either cases, you need to reconnect your box from USB.
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0020004000000031, ST, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x0020004000000031, ST, ONENAND
Requested Algorithm: XSR 1.6 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
RAPUv11_XSR17_alg.fg, Type: Algorithm, Rev: 768.11.16.0, Algo: XSR 1.6
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 85F252E351E225CAFC4DFBC8041EABD2823E3500
APE Subsystem Not Found
Flashbus Write baud set to 5.0Mbits
CMT NPC Erased
CMT NPC Written
CMT HWC Erased
CMT HWC Written
CMT CCC Erased
CMT CCC Written
Restarting MCU...
Write RPL Finished!
MCU Version V ICPR82_09w46.8
MCU Date 30-03-10
Product RM-469 (Nokia E52)
Manufacturer (c) Nokia
IMEI 3593270399******
Mastercode 7510654260
IMEI Spare 3A95230793392409
IMEI SV 3395230793392449F5000000
PSN 0
PSD 0000000000000000
LPSN 0
WLAN MAC 5C57C8E9EE6B
APE SW 034.001
APE Variant 034.001034.001.05.01034.001.C00.01
APE Test 0.073
APE HW 256
APE ADSP 256
RETU 40
TAHVO 00
AHNE 11
RFIC |Vapaus_5.1 | Aura_?.?
DSP ICPR82_09w46.2_RIO
Failed to read info -> Failed to read SP info
Лог BEST:

Connect phone on selected interface...

User ACCEPTED FULL ERASE
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000030000022600010007600C192102011104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001040
EM1 ID: 00001030
PUBLIC ID: 2BA001127D400E4951746744C50DF4F3FEBE1FBB
ASIC MODE ID: 00
ROOT KEY HASH: 25B977A055BE9B5DEC0C38A2A279C695
ROM ID: 3E273BF637BE26FA
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 11.16.0
Processing RAWLOADER...
FLIC : 00400020
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 11.16.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
ADL: Preparing for erase...

Full Erase started...
Asic : CMT , Sub : NAND
Erase Area 0x00000000-0x0FFFFFFF
Erasing Ok , [0F]
Erase done , time : 00:00:01

ADL: Erase done

ADL: Close_Session
Content: 000205000000000000FFFF00000000
ADL: Reboot
Phone disconected!

Connect phone on selected interface...

User ACCEPTED FULL ERASE
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000030000022600010007600C192102011104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001040
EM1 ID: 00001030
PUBLIC ID: 2BA001127D400E4951746744C50DF4F3FEBE1FBB
ASIC MODE ID: 00
ROOT KEY HASH: 25B977A055BE9B5DEC0C38A2A279C695
ROM ID: 3E273BF637BE26FA
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 11.16.0
Processing RAWLOADER...
FLIC : 00400020
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 11.16.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:01
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
ADL: Preparing for erase...

Full Erase started...
Asic : CMT , Sub : NAND
Erase Area 0x00000000-0x0FFFFFFF
Erasing Ok , [0F]
Erase done , time : 00:00:01

ADL: Erase done

ADL: Close_Session
Content: 000205000000000000FFFF00000000
ADL: Reboot
Phone disconected!

Connect phone on selected interface...

User ACCEPTED FULL ERASE
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000030000022600010007600C192102011104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001040
EM1 ID: 00001030
PUBLIC ID: 2BA001127D400E4951746744C50DF4F3FEBE1FBB
ASIC MODE ID: 00
ROOT KEY HASH: 25B977A055BE9B5DEC0C38A2A279C695
ROM ID: 3E273BF637BE26FA
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 11.16.0
Processing RAWLOADER...
FLIC : 00400020
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 11.16.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:01
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
ADL: Preparing for erase...

Full Erase started...
Asic : CMT , Sub : NAND
Erase Area 0x00000000-0x0FFFFFFF
Erasing Ok , [0F]
Erase done , time : 00:00:01

ADL: Erase done

ADL: Close_Session
Content: 000205000000000000FFFF00000000
ADL: Reboot
Phone disconected!

Connect phone on selected interface...

Core version : 1.22 , Rev : 4.5

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm469_034.001_prd.core.fpsx
PPM : rm469_034.001_05.01_Russian_prd.rofs2.fpsx
PPM2 : rm469_034.001_C00.01_DEFAULT_prd.rofs3.fpsx
CNT : RM469_APE_ONLY_09w23v0.073.fpsx
APE : rm469_034.001_U001.000_prd.uda.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000030000022600010007600C192102011104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001040
EM1 ID: 00001030
PUBLIC ID: 2BA001127D400E4951746744C50DF4F3FEBE1FBB
ASIC MODE ID: 00
ROOT KEY HASH: 25B977A055BE9B5DEC0C38A2A279C695
ROM ID: 3E273BF637BE26FA
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 11.16.0
Processing RAWLOADER...
FLIC : 00400020
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 11.16.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:01
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
ADL: phone is in flash mode

Backup enabled, will read all certificates...
Reading NPC certificate...
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
No any CRT data (MCU damaged/CERT erased), skip saving

===Flashing [MCU]===
Erase : Processing rm469_034.001_prd.core.fpsx
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm469_034.001_prd.core.fpsx
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [SOS+PMML]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [SOS*UPDAPP]
CMT: Writing Hash CERT [SOS*DSP0]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [SOS*ISASW]
CMT: Writing Hash CERT [SOS+CORE]
CMT: Writing Hash CERT [SOS+ROFS1]
Total writen 419 blocks
TIME : Write time : 00:00:17
MCU Write done
ADL: Request programm status
NAND status : 00000003 / 00000002 / 00000000

===Flashing [PPM]===
Erase : Processing rm469_034.001_05.01_Russian_prd.rofs2.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm469_034.001_05.01_Russian_prd.rofs2.fpsx
CMT: Writing Hash CERT [SOS+ROFS2]
Total writen 165 blocks
TIME : Write time : 00:00:07
PPM Write done
ADL: Request programm status
NAND status : 00000003 / 00000002 / 00000000

===Flashing [PPM2]===
Erase : Processing rm469_034.001_C00.01_DEFAULT_prd.rofs3.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm469_034.001_C00.01_DEFAULT_prd.rofs3.fpsx
CMT: Writing Hash CERT [SOS+ROFS3]
Total writen 32 blocks
TIME : Write time : 00:00:01
PPM Write done
ADL: Request programm status
NAND status : 00000003 / 00000002 / 00000000

===Flashing [CNT]===
Erase : Processing RM469_APE_ONLY_09w23v0.073.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing RM469_APE_ONLY_09w23v0.073.fpsx
CMT: Writing Hash CERT [SOS*ENO]
Total writen 12 blocks
TIME : Write time : 00:00:00
CNT Write done
ADL: Request programm status
NAND status : 00000003 / 00000002 / 00000000

===Flashing [APE]===
Erase : Processing rm469_034.001_U001.000_prd.uda.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm469_034.001_U001.000_prd.uda.fpsx
Total writen 3 blocks
TIME : Write time : 00:00:00
APE Write done
ADL: Request programm status
NAND status : 00000003 / 00000002 / 00000000

ADL: Close_Session
Content: 000300000000030000000200000000
ADL: Reboot

Flashing done!
Total flash time : 00:00:28
Reboot phone now...

Reading Phone Info....
Connected phone - Nokia E52-1
Software Info: V ICPR82_09w46.8 30-03-10 RM-469 (c) Nokia
IMEI: 12345610654321?
Ape Version: 034.001
Product code:
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
AfterFlash operations done... Reconnect, wait...
Done!

Elapsed: 00:00:45
Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Phone disconected!

Connect phone on selected interface...

UFS S/N 8131 boot - Ok

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Read and Check phone data...
SimLock status : SimLock Damaged!!!!! :(
Security status : Security Damaged!!!!! :(
SDD Key status : SD Data is Ok

PA_SimLock Version :
PA_SL phone detected

Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000030000022600010007600C192102011104
CMT EM0 ID : 00001040
CMT EM1 ID : 00001030
CMT PUB ID : 2BA001127D400E4951746744C50DF4F3FEBE1FBB
CMT MODE ID : 00
CMT R_HASH : 25B977A055BE9B5DEC0C38A2A279C695
CMT ROM ID : 3E273BF637BE26FA

CMT : Sending 2nd loader...
Use : RAPUv11_2nd.fg , Rev : 0.0 Ver : 1.37.1
CMT Loader sent, Boot Ok
MCU Configuration
MCU Cfg Ok , 03
FLASHID : 00400020 , CMT , NOR
CMT Flash ID : 00400020 < ST => M39BORBOAD
FLCNT : 000000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAPUv11_algo_xsr16.fg , Rev : 0.0 Ver : 1.40.0
CMT Algo sent
PAPUBkeys blank (erased or HW failure)
Transmission mode : Dual (Ddr, TX2)

Boot Done!

PrReq : NOR , 00

Init Service mode... Wait...

Connect phone on selected interface...

Connect phone on selected interface...

Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
SimLock Data found!
SimLock key found!
SuperDongle Key found!
CMLA key found!
WMDRM key found!
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000030000022600010007600C192102011104
CMT EM0 ID : 00001040
CMT EM1 ID : 00001030
CMT PUB ID : 2BA001127D400E4951746744C50DF4F3FEBE1FBB
CMT MODE ID : 00
CMT R_HASH : 25B977A055BE9B5DEC0C38A2A279C695
CMT ROM ID : 3E273BF637BE26FA

CMT : Sending 2nd loader...
Use : RAPUv11_2nd.fg , Rev : 0.0 Ver : 1.37.1
CMT Loader sent, Boot Ok
MCU Configuration
MCU Cfg Ok , 03
FLASHID : 00400020 , CMT , NOR
CMT Flash ID : 00400020 < ST => M39BORBOAD
FLCNT : 00000049010000000200611004000E00B20700
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAPUv11_algo_xsr16.fg , Rev : 0.0 Ver : 1.40.0
CMT Algo sent
PAPUBkeys blank (erased or HW failure)
Transmission mode : Dual (Ddr, TX2)

Boot Done!

Preparing for write certificates...

Switching to CMT...

CMT : NPC erase Ok
Writing NPC... Ok

CMT : CCC erase Ok
Writing CCC... Ok

CMT : HWC erase Ok
Writing HWC... Ok

Init Service mode... Wait...

Check phone mode...
Phone in Local mode
Seting Test mode... wait...
Test mode set

Writing SimLock Key... Ok!
Writing SimLock Data... Ok!
Writing Super Dongle Key... Ok

SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!! :(

Done!

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Read and Check phone data...
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!! :(
SDD Key status : SD Data is Ok

PA_SimLock Version :
PA_SL3 phone detected

Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000030000022600010007600C192102011104
CMT EM0 ID : 00001040
CMT EM1 ID : 00001030
CMT PUB ID : 2BA001127D400E4951746744C50DF4F3FEBE1FBB
CMT MODE ID : 00
CMT R_HASH : 25B977A055BE9B5DEC0C38A2A279C695
CMT ROM ID : 3E273BF637BE26FA

CMT : Sending 2nd loader...
Use : RAPUv11_2nd.fg , Rev : 0.0 Ver : 1.37.1
CMT Loader sent, Boot Ok
MCU Configuration
MCU Cfg Ok , 03
FLASHID : 00400020 , CMT , NOR
CMT Flash ID : 00400020 < ST => M39BORBOAD
FLCNT : 000000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAPUv11_algo_xsr16.fg , Rev : 0.0 Ver : 1.40.0
CMT Algo sent
PAPUBkeys blank (erased or HW failure)
Transmission mode : Dual (Ddr, TX2)

Boot Done!

PrReq : NOR , 00

Init Service mode... Wait...

Connect phone on selected interface...

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Phone disconected!

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Link to my account: http://db.infinity-best.com:8002
Login: 0
Password: AHOUbhot

Connecting to server...

user: 1BC322E4.00
credit: 1
jobs in progress: 0
jobs done: 0

Reading Phone Info....
Connected phone - Nokia E52-1
Software ver : V ICPR82_09w46.8 30-03-10 RM-469 (c) Nokia
IMEI : 3593270399****
Ape Ver : 034.001
APE Var : 034.001034.001.05.01034.001.C00.01
APE ADSP: 256
DSP Ver : ICPR82_09w46.2_RIO
APE Test: 0.073
PPM :
CNT :
Product SN : 0
Product code :
Base Prd.code:
Module code :
Long Prod.SN : 0
Hardware info=======
HWID :
Retu : 40
Tahvo : 00
Batery: 4437 mV
Camera:
CMT BT:
APE BT:
APE HW: 256
LCDVer:
RF ic : |Vapaus_5.1 | Aura_?.?
Lock info ===========
IMEI : 3593270399*****
IMEI spNet :
IMEI svNet :

Conf key : 0000000000000000
Provider key : 2440700000000000
Provider : AT&T;U.S.A. (3650)
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 7

LOCK STATUS :
=============================
BLK : 1
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS : All Open
=============================
User code : Crypted
UserDataExLevel : Low [Gallery]

Done!

Phone disconected!

Connect phone on selected interface...

JayDi

08.06.2011, 17:28

Все новые телефоны проще по USB RPL писать, RAPIDO/RAP4/BCM/RAPU.
Быстрее , проще.

Olimjon

10.06.2011, 15:31

не смог прошит новый тел (русификация) X1-00 (RM-732)
BEST v.1.22

card found: S/N *******
registered to: Olimjon

DLL not found...
Connect phone on selected interface...

UFS S/N ****** boot - Ok

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Reading Phone Info....
SW ver : V 04.35 22-03-11 RM-732 (c) Nokia
IMEI : 356262042645677
PPM : V 04.35
22-03-11
RM-732
(c) Nokia
IE
PCode : 059F0S7
BPCode : 059C435
HWID : 3000
LCDVer : WIN:BARACOAv80
NT39121
IMEI : 356262042645677
Sl Conf : 001-01-00000000000
Sl Prof : 000000000003000-2
Sl Aux : 000B0000
Hw Sig : CB856937254BA2F3
Provider : Default Test Operator

Lock info:
Block 1
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
Block 2
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
Block 3
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
Block 4
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
Block 5
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
Block 6
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;
Block 7
L1:Open; L2:Open; L3:Open; L4:Open; L5:Open;

Done!

Read Uniq key data started...

Phone Imei: 356262042645677
Setting FlashMode
FlashMode set Ok
No answer from phone... :(
1. Check cable/connection, try again
2. Maybe HW fault or bad cable

Error fetching data... :(

Read fail...!

Core version : 1.22 , Rev : 4.5

Selected FlashSettings :
Files Set for Flashing :
MCU : rm732_004.550
PPM : rm732_004.55ei
CNT : rm7320_nai04.55ei

Infineon flashing...
Booting phone now....
Sync Ok , A2
CPU ID : XGOLD , A200341100
Boot Ok , 01AB
Algo Ok , 01
SBL mode Ok
SBL : Default_RAM_Bootloader
EPP CFG [Bering]...
FLASH ID : 0020000000048800
FLASH ID : UNKNOW [Not In Base]
Boot Done!

===Flashing [MCU]===
File : rm732_004.550
Image : hw_s02_rm732_r04.550.fls
Cert block found, sending....
Cert sent
Found 3 region(s)
Processing Region 1/3
Erase , Start : 0x00000000 , Len : 0x00020000
Erasing, wait ...
Erase done
Write , Start : 0x00000000 , Len : 0x00006000
Flashing , wait ...
Region flash done
Processing Region 2/3
Erase , Start : 0x00800000 , Len : 0x00400000
Erasing, wait ...
Erase done
Write , Start : 0x00800000 , Len : 0x003F0000
Flashing , wait ...
Region flash done
Processing Region 3/3
Erase , Start : 0x00C5D000 , Len : 0x00203000
Erasing, wait ...
Erase done
Write , Start : 0x00C5D000 , Len : 0x0019E700
Flashing , wait ...
Region flash done
Check : 722A
===Flashing [PPM]===
File : rm732_004.55ei
Image : hw_s02_rm732_004.55ei.fls
Cert block found, sending....
Cert sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x00100000 , Len : 0x00700000
Erasing, wait ...
Erase Error [0000008000808080000000000000]
Error...
-> Check cable, flashfile

Phone disconected!

Connect phone on selected interface...

UFS S/N ****** boot - Ok

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Phone disconected!

Connect phone on selected interface...

UFS S/N ******* boot - Ok

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Reading Phone Info....
SW ver : V 04.55 14-04-11 RM-732 (c) Nokia
IMEI : ????????0000000
PPM :
PCode : : ?BPCode : HWID : 4-11 LCDVer : WIN:BARACOAv80
NT39121
IMEI : ????????0000000
Sl Conf : 000-00-00000000000
Sl Prof : 000000000004000-0
Sl Aux : 000B0000
Hw Sig : CB856937254BA2F3
Provider : Damaged SL!

Lock info:

Done!

Core version : 1.22 , Rev : 4.5

Selected FlashSettings : Manual
Files Set for Flashing :
PPM : rm732_004.55ei
CNT : rm7320_nai04.55ei

Infineon flashing...
Booting phone now....
Sync Ok , A2
CPU ID : XGOLD , A200341100
Boot Ok , 01AB
Algo Ok , 01
SBL mode Ok
SBL : Default_RAM_Bootloader
EPP CFG [Bering]...
FLASH ID : 0020000000048800
FLASH ID : UNKNOW [Not In Base]
Boot Done!

===Flashing [PPM]===
File : rm732_004.55ei
Image : hw_s02_rm732_004.55ei.fls
Cert block found, sending....
Cert sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x00100000 , Len : 0x00700000
Erasing, wait ...

лог UFS прошился но все равно не включился.
If used non Auto-Ignition cable, press Power-On button
IF_SBL: XGOLD110, Ok
IF_EBL: Default_RAM_Bootloader.10.24, Mode: CC
BAUD_R: 921600
FL_ID : 20000488, Numonyx Unknown 128Mb
MCU FLASH BUNDLE: rm732_004.550
Flash File: hw_s02_rm732_r04.550.fls
Erase Area: 0x00000000 - 0x0001FFFE...Erasing
Erase Area: 0x00000000 - 0x0001FFFE, Erased: 00:01
Write Area: 0x00000000 - 0x00005FFE...Writing
Write Area: 0x00000000 - 0x00005FFE, Written: 00:00
Erase Area: 0x00800000 - 0x00BFFFFE...Erasing
Erase Area: 0x00800000 - 0x00BFFFFE, Erased: 00:36
Write Area: 0x00800000 - 0x00BEFFFE...Writing
Write Area: 0x00800000 - 0x00BEFFFE, Written: 01:08
Erase Area: 0x00C5D000 - 0x00E5FFFE...Erasing
Erase Area: 0x00C5D000 - 0x00E5FFFE, Erased: 00:16
Write Area: 0x00C5D000 - 0x00DFB6FE...Writing
Write Area: 0x00C5D000 - 0x00DFB6FE, Written: 00:27
PPM FLASH BUNDLE: rm732_004.55ei
Flash File: hw_s02_rm732_004.55ei.fls
Erase Area: 0x00100000 - 0x007FFFFE...Erasing
Erase Area: 0x00100000 - 0x007FFFFE, Erased: 00:00
Write Area: 0x00100000 - 0x0063BABE...Writing
Write Area: 0x00100000 - 0x0063BABE, Written: 01:27
Warning, Checksum Mismatch: 0E82 > 17DA
CNT FLASH BUNDLE: rm7320_nai04.55ei
Flash File: hw_s02_rm7320_nai04.55ei.fls
Erase Area: 0x00E60000 - 0x00F5FFFE...Erasing
Erase Area: 0x00E60000 - 0x00F5FFFE, Erased: 00:08
Write Area: 0x00E60000 - 0x00EE193E...Writing
Write Area: 0x00E60000 - 0x00EE193E, Written: 00:08
Flashing Done: 04:26
ShutDown Done

тел не включается.
что можно сделать?

JayDi

10.06.2011, 15:42

Попробуйте так:
1. Прошить MCU
2. Прошить CNT
3. Прошить ррм. Если снова не пройдет - ррм другой версии. сдается мне - дело в ррм-е.

chabrus

11.06.2011, 20:38

Несколько более сложный процесс чем просто прошивка.
6300 RM-217 виснет безбожно. Прошивка слетает каждый день.

Слил сертификаты.

Phone found!
Series 40 Device detected!
read info... - Ok

Backup Certificates now...
WMDRM read ... ok
CRT308 Backup Created
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000010000022600010006010C192101001101
CMT EM0 ID : 00000232
CMT EM1 ID : 00000353
CMT PUB ID : 1890011591556E56388B5732065ECCF80DEEA1A7
CMT MODE ID : 00
CMT R_HASH : BAF3A9C3DBFA8454937DB77F2B8852B1
CMT ROM ID : 191EC665DFAAF68F

CMT : Sending 2nd loader...
Use : RAP3Gv3_2nd.fg , Rev : 0.0 Ver : 10.42.0
CMT Loader sent, Boot Ok
MCU Configuration
MCU Cfg Ok , 03
FLASHID : 220800EC , CMT , NOR
CMT Flash ID : 220800EC < SAMSUNG [SEC] => K8F5615ETM\K5G5629ATD
FLCNT : 00000000000000000000000000000000000000
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAP3Gv3_algo.fg , Rev : 0.0 Ver : 10.40.0
CMT Algo sent
CMT PAPUB : 7F7E6491E8D30494B45630BB3A8599F4E1C674C955
Transmission mode : Dual (Ddr, TX2)

Boot Done!

CMT : Read NPC certificate...
Cert size : 12288 byte(s)
IMEI : 359809016837065
CMT : Read CCC certificate...
Cert size : 8192 byte(s)
CMT : Read HWC certificate...
Cert size : 12288 byte(s)
CMT : Read VARIANT certificate...
Cert size : 20480 byte(s)
Cert Read done!

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
WMDRM_PD Data saved...

RPL saved : c:\InfinityBox\BEST\Backup\Cert\359809016837065.rp l

Затем поставил другую флеш с 3110с. Прошил.

Core version : 1.22 , Rev : 4.5

Selected FlashSettings :
Files Set for Flashing :
MCU : rm217__07.30.mcusw
PPM : rm217__07.30.ppm_c
CNT : rm217__07.30.image_c_tr_white
Check FlashFiles, Please, wait...
-> SWversion check skipped : Dead mode selected

Backup enabled, Will read Certificates now...
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000010000022600010006010C192101001101
CMT EM0 ID : 00000232
CMT EM1 ID : 00000353
CMT PUB ID : 1890011591556E56388B5732065ECCF80DEEA1A7
CMT MODE ID : 00
CMT R_HASH : BAF3A9C3DBFA8454937DB77F2B8852B1
CMT ROM ID : 191EC665DFAAF68F

CMT : Sending 2nd loader...
Use : RAP3Gv3_2nd.fg , Rev : 0.0 Ver : 10.42.0
CMT Loader sent, Boot Ok
MCU Configuration
MCU Cfg Ok , 03
FLASHID : 881C0020 , CMT , NOR
CMT Flash ID : 881C0020 < ST => M39L0R807
FLCNT : 00000000000000000000000000000000000000
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAP3Gv3_algo.fg , Rev : 0.0 Ver : 10.40.0
CMT Algo sent
CMT PAPUB : C0E691EA16A7593A9BB28832D7312A39F7ED668D05
Transmission mode : Dual (Ddr, TX2)

Boot Done!

CMT : Read NPC certificate...
Cert size : 12288 byte(s)
IMEI : 353203034359987
CMT : Read CCC certificate...
Cert size : 8192 byte(s)
CMT : Read HWC certificate...
Cert size : 12288 byte(s)
CMT : Read VARIANT certificate...
Cert size : 20480 byte(s)
Cert Read done!

Init Service mode... Wait...

CRT308 Backup Created
WMDRM read ... ok
NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
WMDRM_PD Data saved...

RPL saved : c:\InfinityBox\BEST\Backup\Cert\12345610654321x.rp l

Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000010000022600010006010C192101001101
CMT EM0 ID : 00000232
CMT EM1 ID : 00000353
CMT PUB ID : 1890011591556E56388B5732065ECCF80DEEA1A7
CMT MODE ID : 00
CMT R_HASH : BAF3A9C3DBFA8454937DB77F2B8852B1
CMT ROM ID : 191EC665DFAAF68F

CMT : Sending 2nd loader...
Use : RAP3Gv3_2nd.fg , Rev : 0.0 Ver : 10.42.0
CMT Loader sent, Boot Ok
MCU Configuration
MCU Cfg Ok , 03
FLASHID : 881C0020 , CMT , NOR
CMT Flash ID : 881C0020 < ST => M39L0R807
FLCNT : 00000000000000000000000000000000000000
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAP3Gv3_algo.fg , Rev : 0.0 Ver : 10.40.0
CMT Algo sent
CMT PAPUB : C0E691EA16A7593A9BB28832D7312A39F7ED668D05
Transmission mode : Dual (Ddr, TX2)

Boot Done!

Transmission mode : Dual (Ddr, TX2)
Erase : Processing rm217__07.30.mcusw
Found 9 areas to erase, erase group
Asic : CMT , Sub : NOR
CMT , NOR , Area : 0x00000000 - 0x000006BF
CMT , NOR , Area : 0x000006C0 - 0x0001FFFF
CMT , NOR , Area : 0x00020000 - 0x0007FFFF
CMT , NOR , Area : 0x00080000 - 0x000DFFFF
CMT , NOR , Area : 0x00100000 - 0x001FFFFF
CMT , NOR , Area : 0x00200000 - 0x0031FFFF
CMT , NOR , Area : 0x00320000 - 0x0105FFFF
CMT , NOR , Area : 0x01060000 - 0x01067FFF
CMT , NOR , Area : 0x01068000 - 0x0107FFFF
Using TimeOut : 7 min ( 430 sec )
Erasing, wait.....
CMT : Group erase Ok
TIME : Erase time : 00:01:00
PrReq : NOR , 00
Transmission mode : Dual (Ddr, TX2)
Write : Processing rm217__07.30.mcusw
CMT: Writing Hash CERT [NOLO]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [UPDAPP]
CMT: Writing Hash CERT [DSP0]
CMT: Writing Hash CERT [MCUSW]
CMT: Writing Hash CERT [PMM_CONF]
CMT: Writing Hash CERT [SBIF_CONF]
Total writen 943 blocks
TIME : Write time : 00:02:03

PrReq : NOR , 00

Transmission mode : Dual (Ddr, TX2)
Erase : Processing rm217__07.30.ppm_c
Found 1 areas to erase, erase group
Asic : CMT , Sub : NOR
CMT , NOR , Area : 0x01080000 - 0x015FFFFF
Using TimeOut : 7 min ( 430 sec )
Erasing, wait.....
CMT : Group erase Ok
TIME : Erase time : 00:00:19
PrReq : NOR , 00
Transmission mode : Dual (Ddr, TX2)
Write : Processing rm217__07.30.ppm_c
Total writen 289 blocks
TIME : Write time : 00:00:38

PrReq : NOR , 00

ConvertImage: Processing rm217__07.30.image_c_tr_white
ConvertImage: Page Size is 64K, converting...
ConvertImage: File converted
Transmission mode : Dual (Ddr, TX2)
Erase : Processing rm217__07.30.image_c_tr_white_128
Found 1 areas to erase, erase group
Asic : CMT , Sub : NOR
CMT , NOR , Area : 0x01600000 - 0x01FDFFFF
Using TimeOut : 7 min ( 430 sec )
Erasing, wait.....
CMT : Group erase Ok
TIME : Erase time : 00:00:45
PrReq : NOR , 00
Transmission mode : Dual (Ddr, TX2)
Write : Processing rm217__07.30.image_c_tr_white_128
Total writen 208 blocks
TIME : Write time : 00:00:27

PrReq : NOR , 00

Init Service mode... Wait...

Reading Phone Info....
Connected phone - Nokia 6300
Software Info: V 07.30
07-05-09
RM-217
(c) Nokia.
IMEI: 12345610654321?
Product code: 0544321
Checking...
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!! :(
Read Info Done!
Checking User Certificates...
Total - 0 certs
Uploading certificates...
Repair user cert failed :(
AfterFlash operations done... Reconnect, wait...
Connect phone on selected interface...

Как видно из лога, бест считал с телефона уже сбитые сертификаты, и только потом прошил.
Залил бекапы.

Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
WMDRM key found!
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000010000022600010006010C192101001101
CMT EM0 ID : 00000232
CMT EM1 ID : 00000353
CMT PUB ID : 1890011591556E56388B5732065ECCF80DEEA1A7
CMT MODE ID : 00
CMT R_HASH : BAF3A9C3DBFA8454937DB77F2B8852B1
CMT ROM ID : 191EC665DFAAF68F

CMT : Sending 2nd loader...
Use : RAP3Gv3_2nd.fg , Rev : 0.0 Ver : 10.42.0
CMT Loader sent, Boot Ok
MCU Configuration
MCU Cfg Ok , 03
FLASHID : 881C0020 , CMT , NOR
CMT Flash ID : 881C0020 < ST => M39L0R807
FLCNT : 00000000000000000000000000000000000000
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAP3Gv3_algo.fg , Rev : 0.0 Ver : 10.40.0
CMT Algo sent
PAPUBkeys blank (erased or HW failure)
Transmission mode : Dual (Ddr, TX2)

Boot Done!

Preparing for write certificates...

Switching to CMT...

CMT : NPC erase Ok
Writing NPC... Ok

CMT : CCC erase Ok
Writing CCC... Ok

CMT : HWC erase Ok
Writing HWC... Ok

Init Service mode... Wait...

Check phone mode...
Phone already in Test mode, skip change...

Затем проверил телефон.

SDD Key status : SDData Damaged!!!!! :(
SimLock status : SimLock is Ok
Security status : Security is Ok

Восстановил SD

Repair SD procedure started...

Phone Imei: 359809016837065
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000010000022600010006010C192101001101
CMT EM0 ID : 00000232
CMT EM1 ID : 00000353
CMT PUB ID : 1890011591556E56388B5732065ECCF80DEEA1A7
CMT MODE ID : 00
CMT R_HASH : BAF3A9C3DBFA8454937DB77F2B8852B1
CMT ROM ID : 191EC665DFAAF68F

CMT : Sending 2nd loader...
CMT Loader sent, Boot Ok
rap= 1890011591556E56388B5732065ECCF80DEEA1A7
hash= BAF3A9C3DBFA8454937DB77F2B8852B1
key= CBE5885E2E7812BE8DCD689E75FF44C97FBD6145

Init Service mode... Wait...

Key file updated...
Check phone mode...
Phone already in Test mode, skip change...
Writing Super Dongle Key... Ok
Done!

Checking StartUp data ...
-----------------------
SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!! :(

Local SX4 procedure started...

Phone Imei: 359809016837065
Key file exists, no need to read...
Step 1...
Step 2...
Step 3...
SX4 Auth - Ok
Done!

Uploading RF/Battery tune to phone...
Using : RM-217.pm
Operating mode is OK, no need change...

Field 1
Record 0 write - Ok
Record 2 write - Ok
Record 4 write - Ok
Record 6 write - Ok
Record 8 write - Ok
Record 13 write - Ok
Record 16 write - Ok
Record 18 write - Ok
Record 20 write - Ok
Record 25 write - Ok
Record 29 write - Ok
Record 34 write - Ok
Field 309
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 4 write - Ok
Record 5 write - Ok
Record 7 write - Ok
Record 8 write - Ok
Record 17 write - Ok
Record 22 write - Ok

Check ST_SECURITY now...
Security status : ST_SECURITY => OK

В итоге получмл полностью функционирующий телефон.

Checking StartUp data ...
-----------------------
SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security is Ok

Как видно, бест справился с поставленной задачей, что собственно еще один большой плюс.

ЗЫ: забыл написать. При включении с сим получил "функции телефона ограничены". Был сбит сим лок.

Repair SL procedure started...

Phone Imei: 359809016837065
Key file exists, no need to read...
Operating mode is OK, no need change...
Writing SimLock Data... Ok
Writing SimLock Key... Ok
Done!
Восстановилась буквально за секунду. Без использования сервера. Что дает огромное преимущество продукту перед МХкеу.

Olimjon

12.06.2011, 09:20

Попробуйте так:
1. Прошить MCU
2. Прошить CNT
3. Прошить ррм. Если снова не пройдет - ррм другой версии. сдается мне - дело в ррм-е.

прошивка V 04.35 все равно так же.
card found: S/N ******
registered to: Olimjon

Connect phone on selected interface...

UFS S/N ***** boot - Ok

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Reading Phone Info....
SW ver : V 04.35 22-03-11 RM-732 (c) Nokia
IMEI : ????????0000000
PPM : V 04.35
22-03-11
RM-732
(c) Nokia
MD
PCode : V 04.BPCode :
0*СHWID : LCDVer : WIN:BARACOAv80
NT39121
IMEI : ????????0000000
Sl Conf : 000-00-00000000000
Sl Prof : 000000000004000-0
Sl Aux : 000B0000
Hw Sig : CB856937254BA2F3
Provider : Damaged SL!

Lock info:

Done!

Core version : 1.22 , Rev : 4.5

Selected FlashSettings : Manual
Files Set for Flashing :
MCU : rm732_004.350
PPM : rm732_004.35md
CNT : rm7320_nai04.35md

Infineon flashing...
Booting phone now....
Sync Ok , A2
CPU ID : XGOLD , A200341100
Boot Ok , 01AB
Algo Ok , 01
SBL mode Ok
SBL : Default_RAM_Bootloader
EPP CFG [Bering]...
FLASH ID : 0020000000048800
FLASH ID : UNKNOW [Not In Base]
Boot Done!

===Flashing [MCU]===
File : rm732_004.350
Image : hw_s02_rm732_r04.350.fls
Cert block found, sending....
Cert sent
Found 3 region(s)
Processing Region 1/3
Erase , Start : 0x00000000 , Len : 0x00020000
Erasing, wait ...
Erase done
Write , Start : 0x00000000 , Len : 0x00006000
Flashing , wait ...
Region flash done
Processing Region 2/3
Erase , Start : 0x00800000 , Len : 0x00400000
Erasing, wait ...
Erase done
Write , Start : 0x00800000 , Len : 0x003F0000
Flashing , wait ...
Region flash done
Processing Region 3/3
Erase , Start : 0x00C5D000 , Len : 0x00203000
Erasing, wait ...
Erase done
Write , Start : 0x00C5D000 , Len : 0x0019E700
Flashing , wait ...
Region flash done
Check : 40DE
===Flashing [PPM]===
File : rm732_004.35md
Image : hw_s02_rm732_004.35md.fls
Cert block found, sending....
Cert sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x00100000 , Len : 0x00700000
Erasing, wait ...
и так висит программа 14%. подождал 10 минут все равно.

UFS прошил тел включился но IMEI битый.
If used non Auto-Ignition cable, press Power-On button
IF_SBL: XGOLD110, Ok
IF_EBL: Default_RAM_Bootloader.10.24, Mode: CC
BAUD_R: 921600
FL_ID : 20000488, Numonyx Unknown 128Mb
MCU FLASH BUNDLE: rm732_004.350
Flash File: hw_s02_rm732_r04.350.fls
Erase Area: 0x00000000 - 0x0001FFFE...Erasing
Erase Area: 0x00000000 - 0x0001FFFE, Erased: 00:01
Write Area: 0x00000000 - 0x00005FFE...Writing
Write Area: 0x00000000 - 0x00005FFE, Written: 00:00
Erase Area: 0x00800000 - 0x00BFFFFE...Erasing
Erase Area: 0x00800000 - 0x00BFFFFE, Erased: 00:35
Write Area: 0x00800000 - 0x00BEFFFE...Writing
Write Area: 0x00800000 - 0x00BEFFFE, Written: 01:06
Erase Area: 0x00C5D000 - 0x00E5FFFE...Erasing
Erase Area: 0x00C5D000 - 0x00E5FFFE, Erased: 00:16
Write Area: 0x00C5D000 - 0x00DFB6FE...Writing
Write Area: 0x00C5D000 - 0x00DFB6FE, Written: 00:28
PPM FLASH BUNDLE: rm732_004.35md
Flash File: hw_s02_rm732_004.35md.fls
Erase Area: 0x00100000 - 0x007FFFFE...Erasing
Erase Area: 0x00100000 - 0x007FFFFE, Erased: 01:00
Write Area: 0x00100000 - 0x006658BE...Writing
Write Area: 0x00100000 - 0x006658BE, Written: 01:33
CNT FLASH BUNDLE: rm7320_nai04.35md
Flash File: hw_s02_rm7320_nai04.35md.fls
Erase Area: 0x00E60000 - 0x00F5FFFE...Erasing
Erase Area: 0x00E60000 - 0x00F5FFFE, Erased: 00:08
Write Area: 0x00E60000 - 0x00EE10BE...Writing
Write Area: 0x00E60000 - 0x00EE10BE, Written: 00:08
Flashing Done: 05:31
ShutDown Done

кто нибудь прошивал Best'ом X1-00.?

JayDi

12.06.2011, 13:00

Если есть возможость продать его - с удовольствием куплю.
Проверяли шитье на первых версиях х1. Тут, скорее всего, траблы изза новой флэшь-памяти. В общем, было бы замечательно заиметь такую тушку.

JayDi

19.06.2011, 13:02

Примерно так это будет выглядеть. Чуток дотестируем только.

chabrus

20.06.2011, 12:39

6700c rm-470.
Contact Servise. Сбит сим лок. Запись заводкого PRL бестом:

Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
SimLock Data found!
SimLock key found!
SuperDongle Key found!
WMDRM key found!
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000030000022600010007600C192102011104
CMT EM0 ID : 00000C34
CMT EM1 ID : 00000C30
CMT PUB ID : 19C00003306303440AD7E8D0890FF12A5960E679
CMT MODE ID : 00
CMT R_HASH : 25B977A055BE9B5DEC0C38A2A279C695
CMT ROM ID : 3E273BF637BE26FA

CMT : Sending 2nd loader...
Use : RAPUv11_2nd.fg , Rev : 0.0 Ver : 1.37.1
CMT Loader sent, Boot Ok
MCU Configuration
MCU Cfg Ok , 03
FLASHID : 004000EC , CMT , NAND
CMT Flash ID : 004000EC < SAMSUNG [SEC] => KAT00F00RA [NAND]
FLCNT : 00030000000000000000000000000000000000
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAPUv11_algo_xsr16.fg , Rev : 0.0 Ver : 1.40.0
CMT Algo sent
CMT PAPUB : CABA40E42B6F3B8A6EFEE35B4A9D15924EB132C689
Transmission mode : Dual (Ddr, TX2)

Boot Done!

Preparing for write certificates...

Switching to CMT...

CMT : NPC erase Ok
Writing NPC... Ok

CMT : CCC erase Ok
Writing CCC... Ok

CMT : HWC erase Ok
Writing HWC... Ok

Init Service mode... Wait...

Check phone mode...
Phone in Local mode
Seting Test mode... wait...
Test mode set

Writing SimLock Key... Ok!
Writing SimLock Data... Ok!
Writing Super Dongle Key... Ok

SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security is Ok

Done!

Телефон работает. При вводе *#06# имей нормальный. При вводе *#92702689# все поля затерты. Серийник и все остальное. Просто черточки.

Запись RPL при помощи МХкеу

Imei: 35694303953475
Updating SIMLOCK...OK
Updating SUPERDONGLE_KEY ...OK
Updating WMDRM_PD...OK
CMT Data :
SYSTEM ASIC ID: 000000030000022600010007600C192102011104 [RAPU ver: 1.1]
EM0 ID: 00000C34
EM1 ID: 00000C30
PUBLIC ID: 19C00003306303440AD7E8D0890FF12A5960E679
ASIC MODE ID: 00
ROOT KEY HASH: 25B977A055BE9B5DEC0C38A2A279C695
ROM ID: 3E273BF637BE26FA
SecondaryBoot: RAPUv11_2nd.fg [BB5] version: 1.37.1 revision: 0.0 size: 0x3AC0
Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104
FlashID0: 00EC 0040 - 0080 0121 [Samsung 2Gb DDP OneNAND,2 Gbits] type: MuxOneNAND,CMT
ExtBUSC: 0000 0000 0000 0000 0000 0000 0000 0000
TransmissionMode: 16Bit
Algorithm: RAPUv11_algo_xsr16.fg [XSR 1.6] version: 1.40.0 revision: 0.0 size: 0x2CB60
Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104
CMT PAPUBKEYS HASH: CABA40E42B6F3B8A6EFEE35B4A9D15924EB132C6
TransmissionMode: DDR&TX2
Updating CMT NPC ...OK
Updating CMT CCC ...OK
Updating CMT HWC ...OK

Phone Type: RM-470 (Nokia 6700 classic)
SW Version: V 13.10 16-06-10 RM-470 (c) Nokia
Imei plain: 35694303953475-6
Product Code: 0570904
Battery voltage: 4511 mV, current: 45 mA
Language Pack:
- not available.

This is SL3 phone(Simlock2 format).
- Avoid SW Downgrade & manual erase to this phone !

SIMLOCK seems to be valid
SUPERDONGLE_KEY seems to be valid
WMDRM_PD seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST passed

Imei net: 356943039534756
Version: SIMLOCK SERVER
Counter: 0/3, 0/10

CONFIG_DATA: 2440700000000000
PROFILE_BITS: 8000000000000002

BLOCK 1: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 2: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 3: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 4: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 5: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 6: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 7: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
Ситуация та же. Но в принципе сам телефон вроде работает.
Jay Di посмотрите что там не так. Файл RPL прикреплен ниже.

aq7

20.06.2011, 13:06

При вводе *#92702689# все поля затерты. Серийник и все остальное. Просто черточки.
этот Imei находится в pm на работу никак не влияет

Olimjon

20.06.2011, 13:15

вот вам ответ.
http://www.mobile-files.ru/forum/showpost.php?p=1711168&postcount=10

chabrus

20.06.2011, 14:47

Спасибо за подсказку, дружище.
Пролил РМ, гарантийное поле восстановилось. Только серийник был чужой. Затем переписал 18 блок в 4 поле, теперь все на месте.
И ремонт после такого будет выглядеть более красиво.

Jay Di: а нельзя реализовать в следующем обновлении данную идею? Достаточно добавить кнопку Repair Warranty imei.

JayDi

20.06.2011, 14:59

Можно, будет.

chabrus

21.06.2011, 16:55

Принесли N8. Сбит имей. В телефоне не работает интерфейс USB, и так как с клиентом не была оговорена дополнительная сумма за ремонт, ремонти ровать разьем не стали.
Заливка заводского RPL через интерфейс UFS.

Will Write RPL keys now...
Check RPL file...
NMP RPL Detected, converting...
Convert done!
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
SimLock Data found!
SimLock key found!
SuperDongle Key found!
CMLA key found!
WMDRM key found!
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000030000022600010007600C192102031104
CMT EM0 ID : 00000C35
CMT EM1 ID : 00000C30
CMT PUB ID : 1AE00104E3A4034423AAA3838019F5E22980887E
CMT MODE ID : 00
CMT R_HASH : 916F75217F32081248B15C38DFC8E81B
CMT ROM ID : E693EF0DAC22615B

UFSx doesn't support New Protocol :(

Boot failed! :(
If phone RAPUYAMA, RAP3Gv4, RAPIDO or BroadComm - Use USB cable ;)

Init Service mode... Wait...

Check phone mode...
Phone in Local mode
Seting Test mode... wait...
Phone found!
Series 60 Device detected!
read info... - Ok

Test mode set

Writing SimLock Key... Error!
Writing SimLock Data... Error!
Writing Super Dongle Key... Ok

Phone disconected!

Connect phone on selected interface...

SDD Key status : SD Data is Ok
Phone found!
Series 60 Device detected!
read info... - Ok

SimLock status : SimLock is Ok
Security status : Security is Ok

Done!

Имей не восстановился

Reading Phone Info....
Connected phone - Nokia N8-00
Software ver : V 92PS1_10w46.9 01-03-11 RM-596 (c) Nokia
IMEI : 12345610654321?
Ape Ver :
APE Var :
APE ADSP:
DSP Ver : TB92PS1_10w46.4
APE Test:
PPM :
CNT :
Product SN : CMJ701328
Product code :
Base Prd.code: 0596826
Module code :
Long Prod.SN : 0
Hardware info=======
HWID : 7300
Retu : 35
Tahvo : 00
Batery: 4658 mV
Camera:
CMT BT:
APE BT:
APE HW:
LCDVer:
RF ic : |Alli_4.3.4
Lock info ===========
IMEI : 12345610654321?
IMEI spNet :
IMEI svNet :

Unable to read Lock table... :(
User code : Crypted
UserDataExLevel : Low [Gallery]

Done!

Забыл отметить, что RPL в каком то странном формате, если открыть блокнотом.
И после попытки полить его в телефон при помощи бест, в папке с RPL файлом появился еще один, в формате Plain.

Отмечу, что до того момента, пытались пролить первый RPL разными боксами, ATF, Cyclone, MXkey. Они все пролили файл до конца, но имей не восстановился.

С помощью ATF влили в телефон, файл преобразованный бестом в plain формат.
Тело работает.

SendCodeStart_NewProtocol :
SendCodeStart_NewProtocol_DCT5 : No Error - 0 (0x00)
TransmissionTypeRequest_DCT5_NewProtocol
TRANSMISSION_TYPE_REQUEST_BB5 GET_PROTOCOLS_BB5
TRANSMISSION_TYPE_REQUEST_BB5 : 59 01 3E 00 C0
TransmissionTypeRequest_DCT5_NewProtocol
FPIF_TRANSMISSION_MODE_LIST_BB5 using default mode 04 DDRand2TX
TRANSMISSION_TYPE_REQUEST_BB5 : 59 02 41 02 04 00 36 03 00 00 61 1C
SendAlgoCodeFile_DCT5 : No Error - 0 (0x00)
FUR_Control_AddClient_BB5() ASIC_INDEX_CMT (Ready)
FUR control Ok...
VPP Enabled by Software
Using Internal VPP
VPP Enabled by Software
FLASH_VOLTAGE_INIT_BB5 : 5C 01 26 04 00 00 00 00 D4
Pabub KEY Request
PhoneInfoRequest_BB5 (Asic Index 00 )
PHONE_INFO_RESPONSE_BB5
PAPUB_KEYS_HASH_RESP_BB5 2A
BB Asic Index : 00
CMT PAPUBKEYS HASH:
D172C32473AE199B213465ABB3853246F9631231
VPP Enabled by Software
Using Internal VPP
VPP Enabled by Software
FLASH_VOLTAGE_INIT_BB5 : 5C 01 26 04 00 00 00 00 D4
StartErase_DCT5...
BlockLength : 0x10 (16)
ERASE Blocks : 0x01 (1)
0 ERASE_AREA_BB5 0x13
Block Length : 0x0D (13)
BB ASIC Index : 0x00 CMT

Erase_SendEraseBlock_BB5_NOR
Task in Progress... Please Wait...

Successfully erased..

Now Writing : CMT NPC Certificate 0x0200 Bytes

NPC Write Successful...

StartErase_DCT5...
BlockLength : 0x10 (16)
ERASE Blocks : 0x01 (1)
0 ERASE_AREA_BB5 0x13
Block Length : 0x0D (13)
BB ASIC Index : 0x00 CMT

Erase_SendEraseBlock_BB5_NOR
Task in Progress... Please Wait...

Successfully erased..

Now Writing : CMT CCC Certificate 0x0200 Bytes

CCC Write Successful...

StartErase_DCT5...
BlockLength : 0x10 (16)
ERASE Blocks : 0x01 (1)
0 ERASE_AREA_BB5 0x13
Block Length : 0x0D (13)
BB ASIC Index : 0x00 CMT

Erase_SendEraseBlock_BB5_NOR
Task in Progress... Please Wait...

Successfully erased..

Now Writing : CMT HWC Certificate 0x0200 Bytes

HWC Write Successful...

RPL Writing was Successful!
Лог инфо с ATF

MCU: V 92PS1_10w46.9 01-03-11 RM-596 (c) Nokia
IMEI: 355361042897139
Model : Nokia N8-00
Product Serial Number: CMJ701328
Product Code : 059C0T6
Basic Production Code: 0596826
Default SN Type : 0
PPM Version : V 92PS1_10w46.9 01-03-11 RM-596 (c) Nokia
HW Version : 7300
RFIC Version : |Alli_4.3.4
DSP Version : TB92PS1_10w46.4
AHNE Version : 11
Retu Version : 35
Tahvo Version : 00

******** Reading SimLock ********
CONFIG KEY: 0000000000000000
PROVIDER KEY: 2440700000000000
Provider : AT&T;U.S.A. (3650)
Counters : 0/3 , 0/10
Block [1] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [2] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [3] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [4] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [5] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [6] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [7] 1:Open 2:Open 3:Open 4:Open 5:Open
SP Lock Status : Not Locked

SIMLOCK_TYPE : PA_SL3 (15-digit NCK)
SIMLOCK_TEST : PASSED
SECURITY_TEST : PASSED
SECURITY_CODE : ENCRYPTED
PHONE_MODE : TEST MODE

IMEI: 355361042897139

ЗЫ: может стоит доработать загрузчики под UFS?

Serg55

21.06.2011, 18:18

chabrus, а читать логи не пробывали?
BEST ведь вас предупредил -
UFSx doesn't support New Protocol :(
И дело не в загрузчиках под UFS , а дело в самом UFS , не поддерживает его железо новый протокол...

leomin

21.06.2011, 21:15

chabrus, пожалуй, на этом форуме, не для кого не новость, что RPL существует в форматах NMP и PLAIN, вот вам BEST перед записью и преобразовал ваш NMP формат в PLAIN.
А вот рассчитаный RPL не стоит выкладывать на форумах, подведёте поставщика.

chabrus

22.06.2011, 14:07

chabrus, а читать логи не пробывали?
BEST ведь вас предупредил -

И дело не в загрузчиках под UFS , а дело в самом UFS , не поддерживает его железо новый протокол...

Обратил внимание, на данную ошибку в логе, в первую очередь.
Подумал, что не написан загрузчик под данную модель.

chabrus, пожалуй, на этом форуме, не для кого не новость, что RPL существует в форматах NMP и PLAIN, вот вам BEST перед записью и преобразовал ваш NMP формат в PLAIN.
А вот рассчитаный RPL не стоит выкладывать на форумах, подведёте поставщика.

Для меня это действительно новость, просто не часто приходится заказывать RPL, ввиду ценовых категорий в нашем регионе.

На счет вложения, спасибо что предупредили. Удалю.

Gatin

23.06.2011, 11:01

5530 версия 1.23 read rpl usb
registered to: Gatin

Connect phone on selected interface...

Backup Certificates now...
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000010000022600010006400C192101051105
CPU ID : RAPIDOv11 , Features : Dead-Test, USBRPL, WR/ER-USB
EM0 ID: 00000296
EM1 ID: 00000B22
PUBLIC ID: 1F90000CC682005269C523D4542D71004250E586
ASIC MODE ID: 00
ROOT KEY HASH: B8C3ADECFC997FCD8081D3DEAF870B8C
ROM ID: 4B9B75103E691FF8
Use URAPIDOv11_2nd.fg , Rev : 2.0 Ver : 11.16.0
Processing RAWLOADER...
FLIC : 00400020
Req : XSR 1.5
Use URAPIDOv11_XSR15_alg.fg , Rev : 2.0 Ver : 11.16.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:03
CFL: Wait for Loader take control ...
CFL: Check mode
Phone ready, boot Ok
TransReq set Ok
PAPUBkeys : F2B05364E563A348608C1C3C9E54FE42AAAA1ACF

CFL: Close_Session
Content: 000300000000000000000000000000
CFL: Reboot

Wait, reconneting...

SL3 Simlock read ... ok
WMDRM read ... ok
CRT308 Backup Created
SimLock Data saved...
SimLock Key saved...
WMDRM_PD Data saved...

RPL saved : c:\InfinityBox\BEST\Backup\Cert\358253031985255_SI M.rpl

All done, Disconnecting

Elapsed: 00:00:17
Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

но ввиду нового хеша ключи не считал
Read Uniq key data started...

Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000010000022600010006400C192101051105
CPU ID : RAPIDOv11 , Features : Dead-Test, USBRPL, WR/ER-USB
PUBLIC ID: 1F90000CC682005269C523D4542D71004250E586
ROOT KEY HASH: B8C3ADECFC997FCD8081D3DEAF870B8C

Error, this HASH not supported yet :(

Fetching failed!

Connect phone on selected interface...

Read fail...!

JayDi

23.06.2011, 11:45

Просто включена проверка, ключи-то прочтутся, а вот для разлока данные будут неверные, доделываем этот момент. Пока убрали их чтение, а то потом будет куча проблем.

Dr_Wolodya

23.06.2011, 17:57

Best 1.23. При попытке разблокировать Nokia N70 через UFS выскакивает следующая ошибка:

http://img838.imageshack.us/img838/507/35540842.jpg

То есть программа почему-то ищет загрузчики в "Documents and Settings".
Вручную создал необходимые папки, закинул туда необходимые файлы и разблокировка прошла успешно.
Логи в папке .\BEST\Logs\. почему-то не сохранились...

JayDi

24.06.2011, 04:23

Хм, странно... А программа установлена по какому пути?

kihmet

24.06.2011, 08:11

Успешно прошита Nokia E6-00 RM-609
BEST v1.23

Dead Mode
Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : RM-609_021.014_79.92_prd.core.fpsx
PPM : RM-609_021.014_20.01_Russian_QW1_79.92_prd.rofs2.fpsx
PPM2 : RM-609_021.014_00.01_79.92_prd.rofs3.fpsx
CNT : RM-609_021.014_U01.01_79.92.uda.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000030000022600010007600C192102031104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001040
EM1 ID: 00001030
PUBLIC ID: 0BD00014B6D6034438A31E7CD7B63F39FE0AFA45
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 11.16.0
Processing RAWLOADER...
FLIC : 00680020
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 11.16.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:03
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
ADL: phone is in flash mode

Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 35487504XXXXXXX
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Cert Read done!

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : D:\GSM\BEST\Soft\InfinityBox_install_BEST_v1.23\Ba ckup\Cert\35487504XXXXXXX_CRT.rpl

===Flashing [MCU]===
Erase : Processing RM-609_021.014_79.92_prd.core.fpsx
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:07
Write : Processing RM-609_021.014_79.92_prd.core.fpsx
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [SOS+PMML]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [SOS*UPDAPP]
CMT: Writing Hash CERT [SOS*DSP0]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [SOS*ISASW]
CMT: Writing Hash CERT [SOS+CORE]
CMT: Writing Hash CERT [SOS+ROFS1]
Total writen 508 blocks
TIME : Write time : 00:00:18
MCU Write done
ADL: Request programm status
NAND status : 00000009 / 00000009 / 00000000

===Flashing [PPM]===
Erase : Processing RM-609_021.014_20.01_Russian_QW1_79.92_prd.rofs2.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing RM-609_021.014_20.01_Russian_QW1_79.92_prd.rofs2.fpsx
CMT: Writing Hash CERT [SOS+ROFS2]
Total writen 163 blocks
TIME : Write time : 00:00:06
PPM Write done
ADL: Request programm status
NAND status : 00000009 / 00000009 / 00000000

===Flashing [PPM2]===
Erase : Processing RM-609_021.014_00.01_79.92_prd.rofs3.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing RM-609_021.014_00.01_79.92_prd.rofs3.fpsx
CMT: Writing Hash CERT [SOS+ROFS3]
Total writen 2 blocks
TIME : Write time : 00:00:00
PPM Write done
ADL: Request programm status
NAND status : 00000009 / 00000009 / 00000000

===Flashing [CNT]===
Erase : Processing RM-609_021.014_U01.01_79.92.uda.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:07
Write : Processing RM-609_021.014_U01.01_79.92.uda.fpsx
Total writen 468 blocks
TIME : Write time : 00:00:18
CNT Write done
ADL: Request programm status
NAND status : 00000009 / 00000009 / 00000000

ADL: Close_Session
Content: 000300000000090000000900000000
ADL: Reboot

Flashing done!
Total flash time : 00:00:59
Reboot phone now...

Reading Phone Info....
Connected phone - Nokia E6-00
Software Info: V 92_11w15.5 25-05-11 RM-609 (c) Nokia
IMEI: 35487504XXXXXXX
Ape Version: 021.014
Product code: 059D5V3
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
FullFactorySet...OK!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Set phone to Normal mode...
AfterFlash operations done...
Done!

Elapsed: 00:01:29
Connect phone on selected interface...

Normal Mode
Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : RM-609_021.014_79.92_prd.core.fpsx
PPM : RM-609_021.014_20.01_Russian_QW1_79.92_prd.rofs2.fpsx
PPM2 : RM-609_021.014_00.01_79.92_prd.rofs3.fpsx
CNT : RM-609_021.014_U01.01_79.92.uda.fpsx
Flashing phone now...
Check files done...
-> Check SW version...
FlashFile version : 021.014
Phone version : 021.014
-> Check SW version : Reflash
Backup CRT308 data...
CRT308 Backup Created
SL3 Simlock read ... ok
WMDRM read ... ok
Check communication with phone....
ADL req restart
Communication verify done... Preparing...
Gathering phone info...
Check communication with phone...
Reboot....
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000030000022600010007600C192102031104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001040
EM1 ID: 00001030
PUBLIC ID: 0BD00014B6D6034438A31E7CD7B63F39FE0AFA45
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 11.16.0
Processing RAWLOADER...
FLIC : 00680020
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 11.16.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
ADL: phone is in flash mode

Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 35487504XXXXXXX
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Cert Read done!

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
SimLock Data saved...
SimLock Key saved...
WMDRM_PD Data saved...

RPL saved : D:\GSM\BEST\Soft\InfinityBox_install_BEST_v1.23\Ba ckup\Cert\35487504XXXXXXX.rpl

===Flashing [MCU]===
Erase : Processing RM-609_021.014_79.92_prd.core.fpsx
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:07
Write : Processing RM-609_021.014_79.92_prd.core.fpsx
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [SOS+PMML]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [SOS*UPDAPP]
CMT: Writing Hash CERT [SOS*DSP0]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [SOS*ISASW]
CMT: Writing Hash CERT [SOS+CORE]
CMT: Writing Hash CERT [SOS+ROFS1]
Total writen 508 blocks
TIME : Write time : 00:00:18
MCU Write done
ADL: Request programm status
NAND status : 00000009 / 00000009 / 00000000

===Flashing [PPM]===
Erase : Processing RM-609_021.014_20.01_Russian_QW1_79.92_prd.rofs2.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing RM-609_021.014_20.01_Russian_QW1_79.92_prd.rofs2.fpsx
CMT: Writing Hash CERT [SOS+ROFS2]
Total writen 163 blocks
TIME : Write time : 00:00:06
PPM Write done
ADL: Request programm status
NAND status : 00000009 / 00000009 / 00000000

===Flashing [PPM2]===
Erase : Processing RM-609_021.014_00.01_79.92_prd.rofs3.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing RM-609_021.014_00.01_79.92_prd.rofs3.fpsx
CMT: Writing Hash CERT [SOS+ROFS3]
Total writen 2 blocks
TIME : Write time : 00:00:00
PPM Write done
ADL: Request programm status
NAND status : 00000009 / 00000009 / 00000000

===Flashing [CNT]===
Erase : Processing RM-609_021.014_U01.01_79.92.uda.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:06
Write : Processing RM-609_021.014_U01.01_79.92.uda.fpsx
Total writen 468 blocks
TIME : Write time : 00:00:18
CNT Write done
ADL: Request programm status
NAND status : 00000009 / 00000009 / 00000000

ADL: Close_Session
Content: 000300000000090000000900000000
ADL: Reboot

Flashing done!
Total flash time : 00:00:57
Reboot phone now...

Reading Phone Info....
Connected phone - Nokia E6-00
Software Info: V 92_11w15.5 25-05-11 RM-609 (c) Nokia
IMEI: 35487504XXXXXXX
Ape Version: 021.014
Product code: 059D5V3
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
FullFactorySet...OK!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Set phone to Normal mode...
AfterFlash operations done...
Done!

Elapsed: 00:01:35
Connect phone on selected interface...

:appl::appl::appl:

kihmet

24.06.2011, 09:06

Успешно прошита Nokia C2-00 RM-704
BEST v1.23

Dead Mode
Selected FlashSettings :
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm704__03.42.mcusw
PPM : rm704__03.42.ppm_i
CNT : rm704__03.42.image_i_magenta_059C8F0
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...

-> If Windows say "Unrecognized device" - just reinsert battery
-> If flashing freeze - reinsert cable and try again
--- Press phone's power button or insert charger! ---

Connection opened successfully
DBG : F00A1FB300020303010100FF
CPUID : SGOLD 213
2nd boot Ok, 01
2nd ready, AA
Sending Algo
Algo sent Ok
BL : Quantum_Bootloader_10.37_M1S1
Speed accepted, use 6.500.000
FLASHID : 89008289
FLIC conf set, RST set
Boot done!

===Flashing [MCU]===
File : rm704__03.42.mcusw
Image : rm704__03.42.mcusw_ebl_psi.fls
Cert block found, sending....
Cert sent
Found 5 region(s)
Processing Region 1/5
Erase , Start : 0x40000000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:00
Write , Start : 0x40000000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 2/5
Erase , Start : 0x40040000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:00
Write , Start : 0x40040000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 3/5
Erase , Start : 0x40060000 , Len : 0x00100000
Erasing, wait ...
Erase done, time : 00:00:05
Write , Start : 0x40060000 , Len : 0x00100000
Flashing , wait ...
Region flash done, time : 00:00:01
Processing Region 4/5
Erase , Start : 0x40280000 , Len : 0x01940000
Erasing, wait ...
Erase done, time : 00:02:25
Write , Start : 0x40280000 , Len : 0x018C0000
Flashing , wait ...
Region flash done, time : 00:00:35
Processing Region 5/5
Erase , Start : 0x43E20000 , Len : 0x00040000
Erasing, wait ...
Erase done, time : 00:00:00
No write data, skip

===Flashing [PPM]===
File : rm704__03.42.ppm_i
Image : package_i.ppm_ebl_psi.fls
Cert block found, sending....
Cert sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x41BC0000 , Len : 0x00600000
Erasing, wait ...
Erase done, time : 00:00:17
Write , Start : 0x41BC0000 , Len : 0x00370444
Flashing , wait ...
Region flash done, time : 00:00:04

===Flashing [CNT]===
File : rm704__03.42.image_i_magenta_059C8F0
Image : package_i_magenta_059C8F0.image.fls
Cert block found, sending....
Cert sent
Found 2 region(s)
Processing Region 1/2
Erase , Start : 0x421C0000 , Len : 0x01C60000
Erasing, wait ...
Erase done, time : 00:02:52
Write , Start : 0x421C0000 , Len : 0x00B20000
Flashing , wait ...
Region flash done, time : 00:00:14
Processing Region 2/2
Erase , Start : 0x43E60000 , Len : 0x000E0000
Erasing, wait ...
Erase done, time : 00:00:05
No write data, skip

Flashing done!
Total flash time : 00:06:42
Reboot phone now...

Reading Phone Info....
Connected phone - C2-00
Software Info: V 03.42 11-05-11 RM-704 (c) Nokia
IMEI: 35741404XXXXXXX
PPM version : V 03.42 11-05-11 RM-704 (c) Nokia I
Product code: 059C1S4
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
FullFactorySet...OK!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Set phone to Normal mode...
AfterFlash operations done...
Done!
Connect phone on selected interface...

Elapsed: 00:07:11
Connect phone on selected interface...

:appl::appl::appl:

BOSS®™

24.06.2011, 13:24

Успешно прошита Nokia C7-00 RM-675
BEST v1.23

Dead Mode
card found: S/N ????:????
registered to: BOSS

Connect phone on selected interface...

Core version : 1.23 , Rev : 4.8

Selected FlashSettings : FullFlash
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : RM-675_014.002_79.92_prd.core.fpsx
PPM : RM-675_014.002_04.01_Russian_79.92_prd.rofs2.fpsx
PPM2 : RM-675_014.002_00.01_79.92_prd.rofs3.fpsx
CNT : RM-675_014.002_U01.01_79.92_prd.uda.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000030000022600010007600C192102031104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001040
EM1 ID: 00001030
PUBLIC ID: 2020010A10D10344541C6BF043F4E560C7FCD26E
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 11.16.0
Processing RAWLOADER...
FLIC : 006800EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 11.16.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:06
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
ADL: phone is in flash mode

Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 3559???????????
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Cert Read done!

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : c:\InfinityBox\BEST\Backup\Cert\355960044543284_CR T.rpl

===Flashing [MCU]===
Erase : Processing RM-675_014.002_79.92_prd.core.fpsx
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:02
Write : Processing RM-675_014.002_79.92_prd.core.fpsx
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [SOS+PMML]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [SOS*UPDAPP]
CMT: Writing Hash CERT [SOS*DSP0]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [SOS*ISASW]
CMT: Writing Hash CERT [SOS+CORE]
CMT: Writing Hash CERT [SOS+ROFS1]
Total writen 540 blocks
TIME : Write time : 00:00:18
MCU Write done
ADL: Request programm status
NAND status : 00000003 / 00000003 / 00000000

===Flashing [PPM]===
Erase : Processing RM-675_014.002_04.01_Russian_79.92_prd.rofs2.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing RM-675_014.002_04.01_Russian_79.92_prd.rofs2.fpsx
CMT: Writing Hash CERT [SOS+ROFS2]
Total writen 159 blocks
TIME : Write time : 00:00:05
PPM Write done
ADL: Request programm status
NAND status : 00000003 / 00000003 / 00000000

===Flashing [PPM2]===
Erase : Processing RM-675_014.002_00.01_79.92_prd.rofs3.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing RM-675_014.002_00.01_79.92_prd.rofs3.fpsx
CMT: Writing Hash CERT [SOS+ROFS3]
Total writen 2 blocks
TIME : Write time : 00:00:00
PPM Write done
ADL: Request programm status
NAND status : 00000003 / 00000003 / 00000000

===Flashing [CNT]===
Erase : Processing RM-675_014.002_U01.01_79.92_prd.uda.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:02
Write : Processing RM-675_014.002_U01.01_79.92_prd.uda.fpsx
Total writen 348 blocks
TIME : Write time : 00:00:15
CNT Write done
ADL: Request programm status
NAND status : 00000003 / 00000003 / 00000000

ADL: Close_Session
Content: 000300000000030000000300000000
ADL: Reboot

Flashing done!
Total flash time : 00:00:44
Reboot phone now...

Reading Phone Info....
Connected phone - Nokia C7-00
Software Info: V 92PS1_10w46.9 01-03-11 RM-675 (c) Nokia
IMEI: 3559???????????
Ape Version: 014.002
Product code: 059B7W2
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
FullFactorySet...OK!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Set phone to Normal mode...
AfterFlash operations done...
Done!

Elapsed: 00:01:12
Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok
:appl::appl::appl::appl::appl:

Dr_Wolodya

24.06.2011, 15:13

Хм, странно... А программа установлена по какому пути?
Программа установлена в "d:\Mobile\NOKIA\BEST\."

P.S. Лог нашёлся - завалялся в "c:\Documents and Settings\Dr_Wolodya\Logs\23_06_2011_17_log.txt":
Phone found!
Series 60 Device detected!
read info... - Ok

Unlock procedure started...

Phone Imei: 3527530166xxxxx
Checking locks...
Conf key : 0000000000000000
Provider key : 2140700000000000
Provider : Movistar (DCT3);Spain
Counters : Key 1 [3] , Fbus 0 [10]
Blocks : 4

LOCK STATUS :
=============================
BLK : 1
Lock1:Close
BLK : 2
Lock1:Close
BLK : 3
Lock1:Close
BLK : 4
Lock1:Close
=============================
LOCKS : Closed
=============================
PA_SL phone detected...
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

APE part info :
APE ASICID : 17100701
APE MODE ID : 00
APE PUB ID : F6A94DD6BFA22063F01D41B70A7172E365B02D12
APE R_HASH : 2C05369F57CC3C4CF9E783E83D9B512B
APE ROM ID : AB5E4ADB27A06946

CMT part info :
CMT ASICID : 000000010000022600010006000C192101002200
CMT EM0 ID : 00000232
CMT EM1 ID : 00000353
CMT PUB ID : 0690001692E15851933F5DBAB028BE2A4B665612
CMT MODE ID : 00
CMT R_HASH : E9EFF4BFAA5393217CA6B17755FC3E14
CMT ROM ID : F28A211FCEA7B19D

CMT : Sending 2nd loader...
CMT Loader sent, Boot Ok
rap= 0690001692E15851933F5DBAB028BE2A4B665612
hash= E9EFF4BFAA5393217CA6B17755FC3E14
key= 1E6A21F0B6477B1AB8EB11736A1A02543266FFA8

Init Service mode... Wait...

Key file updated...
Using F-bus count...
Sending code 181954559518838 Level : 7 to SimLock Server...
Simlock Server Answer: Unlock code Accepted! :)
Unlock Done!

ivanych79

24.06.2011, 17:22

Попался 6220с при коннекте через ufs писал

Read and Check phone data...
BB5 bus checking...
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000010000022600010006400C192101031103
CMT EM0 ID : 00000295
CMT EM1 ID : 00000B22
CMT PUB ID : 1EA0000FF4960158D7FB7D0B2618E0E3DDA0EC9D
CMT MODE ID : 00
CMT R_HASH : CAEEBB67D3C48E6DC7FBFFFFFFFFFFEF

CMT : Sending 2nd loader...
Use : RAPIDOv11_2nd.fg , Rev : 0.0 Ver : 1.37.1
Error : 2nd boot not accepted
RX : 0100000000B172000000

Read and Check phone data...
BB5 bus checking...
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000010000022600010006400C192101031103
CMT EM0 ID : 00000295
CMT EM1 ID : 00000B22
CMT PUB ID : 1EA0000FF4960158D7FB7D0B2618E0E3DDA0EC9D
CMT MODE ID : 00
CMT R_HASH : CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT ROM ID : 4B9B75103E691FF8

CMT : Sending 2nd loader...
Use : RAPIDOv11_2nd.fg , Rev : 0.0 Ver : 1.37.1
CMT Loader sent, Boot Ok
MCU Configuration
MCU Cfg Ok , 03
FLASHID : 004000EC , CMT , NAND
CMT Flash ID : 004000EC < SAMSUNG [SEC] => KAT00F00RA [NAND]
FLCNT : 00030000000000000000000000000000000000
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAPIDOv11_algo.fg , Rev : 0.0 Ver : 1.40.0
CMT Algo sent
CMT PAPUB : 519000BA5458BBCDC84B772B73EB89DF88AC4319E5
Transmission mode : Dual (Ddr, TX2)

Boot Done!

PrReq : NOR , 00
PrReq : NAND , 000300000000070000000700000000

Init Service mode... Wait...

SimLock status : SimLock Damaged!!!!! :(
Security status : Security Damaged!!!!! :(
SDD Key status : read data error

PA_SimLock Version :
PA_SL phone detected
причём ATF и MX выдавал тоже самое но телефон включался и работал, подключил через USB и что увидел
Phone found!
Series 60 Device detected!
read info... - Ok

Reading Phone Info....
Connected phone - Nokia 6220c
Software ver : V 08w16.14 25-09-08 RM-328 (c) Nokia
IMEI : 352921021971974
Ape Ver : 03.46
APE Var : 01.0103.46.233.05
APE ADSP: 256
DSP Ver : ICPR72_08w20
APE Test: rm328_ENO_x_2008wk23v0.30
PPM :
CNT :
Product SN : KRA594244
Product code : 0568595
Base Prd.code: 0548720
Module code :
Long Prod.SN : 0
Hardware info=======
HWID : 1304
Retu : 15
Tahvo : 22
Batery: 4054 mV
Camera:
CMT BT:
APE BT: HCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12708.
APE HW: 256
LCDVer:
RF ic :
Lock info ===========
IMEI : 352921021971974
IMEI spNet : 3A 25 29 01 12 79 91 07
IMEI svNet : 33 25 29 01 12 79 91 47 F5

Conf key : 8000000000000000
Provider key : 2321000093172790
Provider : 3 AT;Austria
Counters : Key 2 [3] , Fbus 0 [10]
Blocks : 1

LOCK STATUS :
=============================
BLK : 1
Lock1:Close
=============================
LOCKS : Closed
=============================
CRT308 Backup Created

User code : Crypted
UserDataExLevel : Low [Gallery]

Done!

Fbus кабель 100%
что было сделано Best 1.23 через USB
Read Uniq key data started...

Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000010000022600010006400C192101031103
CPU ID : RAPIDOv11 , Features : Dead-Test, USBRPL, WR/ER-USB
PUBLIC ID: 1EA0000FF4960158D7FB7D0B2618E0E3DDA0EC9D
ROOT KEY HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
Fetching data, wait...

Reinsert cable and battery, press powerOn button again

Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000010000022600010006400C192101031103
CPU ID : RAPIDOv11 , Features : Dead-Test, USBRPL, WR/ER-USB
EM0 ID: 00000295
EM1 ID: 00000B22
PUBLIC ID: 1EA0000FF4960158D7FB7D0B2618E0E3DDA0EC9D
ASIC MODE ID: 00
ROOT KEY HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID: 4B9B75103E691FF8
Use URAPIDOv11_2nd.fg , Rev : 2.0 Ver : 11.16.0
Processing RAWLOADER...
FLIC : 004000EC
Req : XSR 1.5
Use URAPIDOv11_XSR15_alg.fg , Rev : 2.0 Ver : 11.16.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:00
CFL: Wait for Loader take control ...
CFL: Check mode
Phone ready, boot Ok
TransReq set Ok
PAPUBkeys : 519000BA5458BBCDC84B772B73EB89DF88AC4319

CFL: Close_Session
Content: 000300000000070000000700000000
CFL: Reboot

Wait, reconneting...

rap= 1EA0000FF4960158D7FB7D0B2618E0E3DDA0EC9D
hash= CAEEBB65D3C48E6DC73B49DC5063A2EE
key= 505A7DF5CCBE8C5CC01020976DC66B460A6911A8

Key file updated...
потом просто нажат унлок
Phone found!
Series 60 Device detected!
read info... - Ok

Unlock procedure started...

Phone Imei: 352921021971974
Checking locks...
Conf key : 8000000000000000
Provider key : 2321000093172790
Provider : 3 AT;Austria
Counters : Key 2 [3] , Fbus 0 [10]
Blocks : 1

LOCK STATUS :
=============================
BLK : 1
Lock1:Close
=============================
LOCKS : Closed
=============================
PA_SL2 phone detected...
Key file exists, no need to read...
Using F-bus count...
Sending code 965112205030053 Level : 7 to SimLock Server...
Simlock Server Answer: Unlock code Accepted! :)
Unlock Done!

Reading Phone Info....
Connected phone - Nokia 6220c
Software ver : V 08w16.14 25-09-08 RM-328 (c) Nokia
IMEI : 352921021971974
Ape Ver : 03.46
APE Var : 01.0103.46.233.05
APE ADSP: 256
DSP Ver : ICPR72_08w20
APE Test: rm328_ENO_x_2008wk23v0.30
PPM :
CNT :
Product SN : KRA594244
Product code : 0568595
Base Prd.code: 0548720
Module code :
Long Prod.SN : 0
Hardware info=======
HWID : 1304
Retu : 15
Tahvo : 22
Batery: 4031 mV
Camera:
CMT BT:
APE BT:
APE HW: 256
LCDVer:
RF ic :
Lock info ===========
IMEI : 352921021971974
IMEI spNet : 3A 25 29 01 12 79 91 07
IMEI svNet : 33 25 29 01 12 79 91 47 F5

Conf key : 8000000000000000
Provider key : 2321000093172790
Provider : 3 AT;Austria
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 1

LOCK STATUS :
=============================
BLK : 1
Lock1:Open
=============================
LOCKS : All Open
=============================
CRT308 Backup Created

User code : Crypted
UserDataExLevel : Low [Gallery]

Done!