COM5 selected
Device: Autodetect
Checking data, wait...
Action: Read information
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02]...
Release Power button now !
Boot Done
Initialize...
detecting chip[00] in region[00]...
flash: 01227E22212200
flash: 29EA0000000000
flash: AMD/Fujitsu std [0004x010000 003Ex040000 0004x010000] 16Mb
total number of flash chip detected: 01
Initialize Done
Set baud...
460800
Set baud Done
Check space...
operation mode: Fast detection mode
device parameters autodetection in progress..
detecting chip[00] in region[00]...
flash: 01227E22212200
flash: 29EA0000000000
flash: AMD/Fujitsu std [0004x010000 003Ex040000 0004x010000] 16Mb
total number of flash chip detected: 01
total flash region size: 01000000
detecting eeprom area in 1 chip(s)...
flash: 01227E22212200
flash: 29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom found near: 00E00000
detecting eeprom size...
eeprom size: 00200000
eeprom chip: 00
eeprom area detected[00000000]: 00E00000-00FFFFFF
detect device identification, method #1...
detection phase #1...
protocol version: 0004
2nd [enhanced] (or higher) generation model detected
Attention: read full flash backup before any action !
Err: data size mismatch: 002045D8, retry...
warning: probably identification damaged data, power-on problem possible
Probably identification data damaged,
id: [7C1B62CE]
version: [MIKI26_05C_PCB01_GPRS_MT6226_S01.V61_07.BIN_D21D7D4B]
Do you want to write RPL file (RPL file must be in current folder) ?
RPL file declined by user
Probably identification data damaged,
Do you want to create ASK file ?
file saved: id.7C1B62CE.[MIKI26_05C_PCB01_GPRS_MT6226_S01.V61_07.BIN_D21D7D4B].ask
identification detection finished
device-id: 7C1B62CE
version sw1: MIKI26_05C_PCB01_GPRS_MT6226_S01.V61_07.BIN
version sw2: V61.07
detection phase #3...
................................................................
detect device parameters finished
detecting languages...
........................................
language parameters detected
can't detect language names
if software not respond/freez/failed now, make "Detect language names (slow process)" unchecked and repeat operation.
file saved: backup_system_log_7C1B62CE_[MIKI26_05C_PCB01_GPRS_MT6226_S01.V61_07.BIN]_D21D7D4B_20070302-031531.B0X.bin
Finished, time used: 72 sec
Remove/Install battery now !