07-08-2006 SIEMENS_sgold ver 0.300 (beta)
- New bootcore support - version 1.24 1.26
- Added Service/Normal/Burnin modes
- Added Reading info
- Alternative method of unlock.
- Added SKEY support
- Sending to phone
- Release from phone
- SKEY modes
- Added Writing security data via normal and service mode
- Added LCD maintence
- Test patterns
- LCD/Keyboard light test
- CONTRAST Read/Set/Write
- Display controller determination
- Added FFS formating

I. Alternative method of unlock - SLOW METHOD!!!
This method can be used for unlock phone via Service mode
when boot mode failed. (Bad RAM/FLASH soldering, bad connection between
phone and cable)

STEPS:
1. If Boot Method (Direct unlock failed) on tab "CODES" are filled
fields with technical data from phone - ESN/HASH/IMEI
2. On tab "CODES" press "Calc SKEY" to calculate SERVICE KEY
- Service key will be used to open BUS for full control of phone.
3. If SKEY is calculated will be filed into respective field.
4. Press "Send SKEY" to send SERVICE KEY to phone for opening
BUS for full control
Now phone are into FACTORY MODE...
5. With Pressing "Write security data" will unlock phone.
6. With pressing "Close SKEY" can close BUS to CUSTOMMER MODE. (This step is not important)

THIS PROCEDURE ARE AUTOMATED WITH BUTTON "OTHER UNLOCK"

II. FFS tab
This function format "PARTITIONS" on phone. This will remove pictures,
melodies, photos etc...
After format need perform FFS_INIT or flash with XFS file to restore
content data.
-------------------------------------------------
WARNING!!! WARNING!!! WARNING!!!
BE CAREFULL WITH FFS_C FORMATING!!!
WARNING!!! WARNING!!! WARNING!!!
-------------------------------------------------