Вас приветствует Octoplus/Octopus Box Samsung software версии 
2.2.1
-----------------------------------------------------------------------------------
To connect SM-N910C phone you have to perform the following steps:
1. Disconnect USB cable from phone. 
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
Платформа: Samsung Android
Выбранный порт: COM161
Выбранная модель: SM-N910C
Selected file: C:\Program Files\Octoplus\Octoplus_Samsung\BACKUP
\N910c.cert
Please, press "OK" button on the phone to allow USB debugging..
Proper android device not found. Make shure that "USB debug" option 
on the device is turned on.
Writing Certificate failed
Performed by 2.2.1 software version
-----------------------------------------------------------------------------------
Платформа: Samsung Android
Выбранный порт: COM161
Выбранная модель: SM-N910C
Selected file: C:\Program Files\Octoplus\Octoplus_Samsung\BACKUP
\N910c.cert
Please, press "OK" button on the phone to allow USB debugging..
Определена модель телефона: SM-N910C
Дата создания прошивки: Fri Oct 30 08:32:39 KST 2015
PDA version: N910CXXU2COJ5
CSC version: N910COXE2COJ1
Версия программного обеспечения: Unknown
Android version: 5.1.1 (LMY47X)
Checking Root:
Phone is Rooted.
Reading security backup, please wait...
Phone will restart now. Please don't disconnect cable!
Perform the following steps: 
1. Connect phone via UART cable to the Box.
2. Note: phone screen must be active
Connecting to phone, please wait...
Found more then one box connected to COM3
Writing Certificate failed
Performed by 2.2.1 software version
-----------------------------------------------------------------------------------
Платформа: Samsung Android
Выбранный порт: COM3
Выбранная модель: SM-N910C
Selected file: C:\Program Files\Octoplus\Octoplus_Samsung\BACKUP
\N910c.cert
Определена модель телефона: SM-N910C
Дата создания прошивки: Fri Oct 30 08:32:39 KST 2015
PDA version: N910CXXU2COJ5
CSC version: N910COXE2COJ1
Версия программного обеспечения: N910CXXU1COK1
Android version: 5.1.1 (LMY47X)
Checking Root:
Phone is Rooted.
Reading security backup, please wait...
Phone will restart now. Please don't disconnect cable!
Perform the following steps: 
1. Connect phone via UART cable to the Box.
2. Note: phone screen must be active
Connecting to phone, please wait...
Found more then one box connected to COM3
Writing Certificate failed
Performed by 2.2.1 software version