Connect phone on selected interface...

User ACCEPTED FULL ERASE
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BootRom] : 1st boot Ok!
ASIC ID:       000000030000022600010007600C192102031104
CPU ID :       RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00000C35
EM1 ID:        00000C30
PUBLIC ID:     02C0011870DE0344928010C97F5A0F6FADCD92AA
ASIC MODE ID:  00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID:        E693EF0DAC22615B
Use RAPUv11_2nd.fg  ,  Rev : 3.0  Ver : 12.14.0 
Processing RAWLOADER...
FLIC : 00500020
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg  ,  Rev : 3.0  Ver : 12.14.0 
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:02 

- > Backup check skipped by user

Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : CCD9F80559BA50D9B3E274F9E7120BE1EE4EEA7C

Reading NPC certificate...
IMEI : 000000000000000
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...

ADL: Preparing for erase...

Full Erase started...
Asic : CMT , Sub : NAND
Erase Area 0x00000000-0x1FFFFFFF
Erasing Ok , [0F]
Erase done , time : 00:00:06 

ADL: Erase done

ADL: Close_Session
Content: 000205000000000000FFFF00000000
ADL: Reboot
Phone disconected!

Core : v1.98 , BB5XG FlashEngine : v9.9

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm632_081.004_prd.core.fpsx
PPM : rm632_081.004_54.01_Russian_QW1_x3_prd.rofs2.fpsx
PPM2 : rm632_081.004_C00.01_DEFAULT_prd.rofs3.fpsx
CNT : rm632_081.004_U005.000_prd.uda.fpsx
Flashing phone now...
[Gen] Rules accepted for : RAPUxx Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BootRom] : 1st boot Ok!
ASIC ID:       000000030000022600010007600C192102031104
CPU ID :       RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00000C35
EM1 ID:        00000C30
PUBLIC ID:     02C0011870DE0344928010C97F5A0F6FADCD92AA
ASIC MODE ID:  00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID:        E693EF0DAC22615B
Use RAPUv11_2nd.fg  ,  Rev : 3.0  Ver : 12.14.0 
Processing RAWLOADER...
FLIC : 00500020
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg  ,  Rev : 3.0  Ver : 12.14.0 
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:01 
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : blank (Erased or HW failure)
ADL: phone is in flash mode

Backup enabled, will read all certificates...
Reading NPC certificate...
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...

 - > No any CRT data (MCU damaged/CERT erased), skip saving


 === SW Version Check === 
- > Can not collect initial info, continue flashing...
- > Hope, this version will be ok
 === SW Version Check === 

   ===Flashing [MCU]===
Erase : Processing rm632_081.004_prd.core.fpsx
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:02 
Write : Processing rm632_081.004_prd.core.fpsx
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [SOS+PMML]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [SOS*UPDAPP]
CMT: Writing Hash CERT [SOS*DSP0]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [SOS*ISASW]
CMT: Writing Hash CERT [SOS+CORE]
CMT: Writing Hash CERT [SOS+ROFS1]
Total writen 436 blocks
TIME : Write time : 00:00:14 
MCU Write done
ADL: Request programm status
NAND status : 00000002 / 00000002 / 00000000

   ===Flashing [PPM]===
Erase : Processing rm632_081.004_54.01_Russian_QW1_x3_prd.rofs2.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00 
Write : Processing rm632_081.004_54.01_Russian_QW1_x3_prd.rofs2.fpsx
CMT: Writing Hash CERT [SOS+ROFS2]
Total writen 222 blocks
TIME : Write time : 00:00:08 
PPM Write done
ADL: Request programm status
NAND status : 00000002 / 00000002 / 00000000

   ===Flashing [PPM2]===
Erase : Processing rm632_081.004_C00.01_DEFAULT_prd.rofs3.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00 
Write : Processing rm632_081.004_C00.01_DEFAULT_prd.rofs3.fpsx
CMT: Writing Hash CERT [SOS+ROFS3]
Total writen 35 blocks
TIME : Write time : 00:00:01 
PPM Write done
ADL: Request programm status
NAND status : 00000002 / 00000002 / 00000000

   ===Flashing [CNT]===
Erase : Processing rm632_081.004_U005.000_prd.uda.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:02 
Write : Processing rm632_081.004_U005.000_prd.uda.fpsx
Total writen 97 blocks
TIME : Write time : 00:00:05 
CNT Write done
ADL: Request programm status
NAND status : 00000002 / 00000002 / 00000000

ADL: Close_Session
Content: 000300000000020000000200000000
ADL: Reboot

Flashing done!
Total flash time : 00:00:35
Reboot phone now...

 - > AfterFlash Failed! :( Reason : Downgrade try or HW Error
     Anyway - try reinsert battery and PowerUp phone manualy