EasyJtag Suite ver.: 1.9.0.0 / wxWidgets 3.1.0-W-U started.
Operating system ver.: Windows 7 (build 7601, Service Pack 1), 64-bit edition.
Successfully connected to box on COM7
Box S/N: 0C012009EF7DB75D, ,FW Ver.: 01.52
Box Working Mode: JTAG Box.
Box Drivers version: 3.0.0.0, are OK
Z3X Card Serial : xxxx-xxxx , ver: 22 
Z3X Card Activation [LG] : ACTIVATED
Z3X Card Activation [SAMS] : ACTIVATED
Z3X Card Activation [JTAG] : ACTIVATED
Z3X EasyJtag Software ver. 1.9.0.0
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 0C012009EF7DB75D, ,FW Ver.: 01.52
CMD Pullup Level:1784 mV
CMD Active Level:1845 mV
eMMC Device Information
EMMC CID : 15010056545530304DF76BBD5F65CF36
EMMC CSD : D02701320F5903FFF6DBFFFF8E40406C
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 12/2012 Rev.0xF7
EMMC NAME: VTU00M , S/N: 1807572837
EMMC NAME (HEX): 56545530304D00 
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
Backup saved: VTU00M_1807572837_20150304_2035.extcsd
Done.

Running:SAMSUNG: eMMC firmware update...
EMMC NAME: VTU00M
Z3X EasyJtag Software ver. 1.9.0.0
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 0C012009EF7DB75D, ,FW Ver.: 01.52
CMD Pullup Level:2083 mV
CMD Active Level:2588 mV
Setup firmware update mode... 
Success!
Sending eMMC firmware...
Success!
Verifying eMMC firmware...
Success!
Flashing eMMC firmware...
Success!
Repairing eMMC CID...
Success!
eMMC firmware is updated now! 
Please reconnect eMMC power lines before next operation!
Please don't forget to repair extCSD from backup!
Please don't forget to configure BOOT sizes!
Done.

extCSD file...D:\GSM\Z3X\Easy_Jtag\Backups\VTU00M_1807572837_20150200_1548.extcsd
Running:Repair extCSD...
Z3X EasyJtag Software ver. 1.9.0.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:2083 mV
CMD Active Level:2588 mV
Writing...
Done.

Z3X EasyJtag Software ver. 1.9.0.0
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 0C012009EF7DB75D, ,FW Ver.: 01.52
CMD Pullup Level:2072 mV
CMD Active Level:2578 mV
eMMC Device Information
EMMC CID : 1501005654553030300C20138686416E
EMMC CSD : D02701320F5903FFF6DBFFFF8E40406C
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 04/2014 Rev.0xC
EMMC NAME: VTU000 , S/N: 538150534
EMMC NAME (HEX): 56545530303000 
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
Backup saved: VTU000_ 538150534_20150304_2037.extcsd
Done.