Re: Samsung P7500 нужно восстановить bootloader
#5
Всем привет. Тоже мучаюсь с таким аппартом. bootloader.bin взял из стоковой прошивки, пытаюсь восстановить, лог такой:
Код:
======= Flashing images to the P4 device =======
1. Flashing all images (boot, system) - WIFI
2. Flashing all images (boot, system) - RF
8. Exit
================================================
Current BCT: 300MHz_Jun21_2.bct
(!)Note: Set the target on the RECOVERY mode.
Type the number you want: 2
Flashing all images...
Nvflash started
rcm version 0X20001
System Information:
chip name: t20
chip id: 0x20 major: 1 minor: 4
chip sku: 0x8
chip uid: 0x037c708540df****
macrovision: disabled
hdcp: enabled
sbk burned: true
dk burned: true
boot device: emmc
operating mode: 4
device config strap: 0
device config fuse: 17
sdram config strap: 0
sending file: 300MHz_Jun21_2.bct
- 4080/4080 bytes sent
300MHz_Jun21_2.bct sent successfully
odm data: 0x100c0105
downloading bootloader -- load address: 0x108000 entry point: 0x10800
sending file: bootloader.bin
\ 1926308/1926308 bytes sent
bootloader.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
setting device: 2 3
creating partition: BCT
failed executing command 16 NvError 0x120000
command failure: create failed
Для продолжения нажмите любую клавишу . . .
При этом на дисплее отображается
NvFlash Recovery Mode .
Флеш поменял на заведомо исправную, точно такую же. Поведение не изменилось... Значит это не флеш. Что тогда может быть? Есть ли у кого полный пакет для восстановления?