Re: Программное восстановление W550
#5
Бодрого времени суток!
Может я конечно что-то путаю парни, но
Цитата:
he_laser 31-01-2006 03:31
GUI v0.91373013
- RED49 W550/W600 no-tp flashig finalized (all operations works now and no special flashes need. warning ! not set your cid to anything <49 - phone will require testpoint to revive.
- added all needed EROMs in EROM folder.
- script is changed almost completely.
new command:
readpkg:/dir/in/phone
makes a file package for transferring to other phones (so-called customizing  )
example:
readpkg:/tpa/user
new command:
writepkg: \package\on\pc
write previously backuped files back to phone
example:
writepkg:c:\package\k600\emea1.pkg
new command:
readdir:/starting/dir/in/phone
extracts all files and directories from phone to ph_out/ folder in setool2 directory
example:
readdir:/tpa/user
new command:
mkdir:/dir/in/phone
new command:
rmdir:/dir/in/phone
new command:
delfile:/file/in/phone.ext
changed command:to write a file into phone filesystem now use
wrfile:file\on\pc,/file/in/phone
now, short script example with explanations:
gdfsread:00000013
; read gdfs block 0 unit 0x13. variable will be written as ready script.
gdfsreadbinary:00000013
; read gdfs block 0 unit 0x13. variable will be written in raw binary form.
gdfswrite:00020CBF31323334
; write gdfs block 2 unit 0xcbf bytes 0x31323334 (ascii 1234)
chdir:/
; change dir to root
readfile:/tpa/preset/log.txt
; readfile sample
readfile:/tpa/preset/system/language/ru.lng
; readfile sample
readfile:/tpa/preset/custom/customize.xml
; readfile sample
chdir:/tpa
; change dir to /tpa
listdirs:
; show all directory and filenames
mkdir:/ifs/security/tester
; make directory example
wrfile:cora.fps,/ifs/security/tester/test.txt
; write file .\cora.fps to /ifs/security/tester/test.txt
makepkg:/ifs
; make package from /ifs directory as pkg_your_imei.pkg in current directory
delfile:/ifs/security/tester/test.txt
; delete file
rmdir:/ifs/security/tester
; delete directory (can only be done after all files removed)
writepkg:test.pkg
; write package from test.pkg
chdir:/ifs/security/tester
; chdir
listfiles:
; show all files in /ifs/security/tester
readdir:/tpa/user/
; extract all data to ph_out directory
the_laser 14-03-2006 00:03
GUI v0.91380009
- added FULL RED CID49 NO TESTPOINT support for NEW W500/W600, NEW K600/V600/K608, W900, see notes below
- updated "direct flash patching" for new sharp 703/903 firmwares
- testpoint usage allowed on sharp phones now
- testpoint usage reduced during operations
- added profiles support
- added "phone id" button (test cable, recognize phone cid,etc)
- slightly tuned ignition on ufs/com/dss - must be better
- fixed imei changing problem on w550/w600 in no-tp mode.
- some other internal modifications
- new bugs (unknown yet)
notes on REDCID49 support.
first. it must work only on non-touched (new) phones.
if phone was "tuned" with other software - no any warranty, but, generally, it should work.
second.
during ANY operations red49 phone became unusable (dead) until you flash so-called "restoration" file or flash "main" part of phone flash.
i prepared restoration files for most versions of red49 firmwares,they resides in "rest" folder of setool2 distribution.
usage of restoration file is simple. just determine your firmware version and select corresponding restoration file in "restoration file" edit.
if your unlucky and there is no restoration file for yours version of firmware, then you must fullflash phone (WITHOUT TOUCH TO GDFS AREA), just main+fsimage+complete.
third.
during flashing w900 phones on some (i think most) com cables, CHECK option "disable USB" - phone somehow assumes it is on usb, but it is on com
fourth.
well, no more to say - go, try, cry or enjoy. preliminary beta testing shows
good percentage of success (99.9%)
some example:
q: i have red49 w550, i don't know what firmware version inside, i want it unlocked and russian.
a:
go to semc tab.
press clear names.
select needed w550 flashfiles (main,fsimage). russian inside emea1
go to settings tab. CHECK complete. CHECK "unlock after flash". UNCHECK "revert to red.
go to semc tab, press flash
when prompted, remove and insert battery, press button "testpoint ok"
phone must be unlocked and flashed.
q: i have k600, i want to unlock it, i know that inside r2ae001 version.
a:
select in "restoration file" edit correct restoration file.
press unlock.
when prompted, remove and insert battery, press button "testpoint ok"
phone must be unlocked and restored, means - working.
NOTES ON PROFILES
button "S" saves all files and settings for current model.
button "L" restores saved files and settings from current model.
profiles works on sharp,lg,semc tabs.
profiles common for all windows.
enjoy, friends.
ps.
as usual, my personal fuck to zuko. you can steal, but you can't create.
my personal greetings to mighty lead, who defeated upcoming db2020.
hope you will at least laungh on my cid49 method and show us, how to do red49 properly.
and my personal ask to all mighty hackers - please, stay aside from setool. better hack something more interesting
|
еще в конце марта пару штук было больных и белых, здоровы уже как бы месяц и без вопросов...
Всем всего...
