Re: Корректно ли Easy-JTAG поддерживает HYNIX H9DP32A4JJAC?
#16
Все, коробку отдал, будем ждать верного решения.
кстати, инфо по ошибке:
Цитата:
|
So the MultiMediaCard sends a R3 response to CMD1 which contains an OCR value of either 0x80FF8080 if the card is ready, or 0x00FF8080 if the internal start-up procedure is not finished (refer to Chapter “Responses”). By omitting the voltage range in the command, the host can query the card stack and determine the common voltage range before sending out-of-range cards into the Inactive State.
|