Full Erase started...
Asic : CMT , Sub : NAND
Erase Area 0x00000000-0x0FFFFFFF
Erasing Ok , [0F]
Erase done , time : 00:00:01 
 - > USE "COLD FLASH" option in FlashSetting for revive device by USB!!!

CFL: Erase done

CFL: Close_Session
Content: 000300000000000000000000000000
CFL: Reboot
Phone disconected!

Connect phone on selected interface...

Core : v1.60 , BB5XG FlashEngine : v3.9

Selected FlashSettings : Cold Flash
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : RM-504_40.0.003_prd.core.C00
PPM : RM-504_40.0.003_prd.rofs2.V05
PPM2 : RM-504_40.0.003_C01_prd.rofs3.fpsx
CNT : RM-504_32.0.007_001_000_U002.uda.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
- > Force ColdFlash mode
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID:       000000010000022600010006400C192101051105
CPU ID :       RAPIDOv11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00000296
EM1 ID:        00000B22
PUBLIC ID:     0F8000054F880052F191B07E5883DE5347C30809
ASIC MODE ID:  00
ROOT KEY HASH: B8C3ADECFC997FCD8081D3DEAF870B8C
ROM ID:        4B9B75103E691FF8
Use URAPIDOv11_2nd.fg  ,  Rev : 2.0  Ver : 12.8.0 
Processing RAWLOADER...
FLIC : 00400020
Req : XSR 1.5
Use URAPIDOv11_XSR15_alg.fg  ,  Rev : 2.0  Ver : 12.8.0 
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:00 
Reopening the connection...
CFL: Wait for Loader take control  ...
CFL: Check mode
Phone ready, boot Ok
TransReq set Ok
PAPUBkeys : Blank (Erased or HW failure) 


CFL: phone is in flash mode

 === SW Version Check === 
- > Can not collect initial info, continue flashing...
- > Hope, this version will be ok
 === SW Version Check === 

   ===Flashing [MCU]===
Erase : Processing RM-504_40.0.003_prd.core.C00
Partitioning....
Partitioning Ok...
Erasing....
Erasing Data....
Erase area : 0x00040000 - 0x00082FFF , CMT , NAND
Erase area : 0x00083400 - 0x003FFFFF , CMT , NAND
Erase area : 0x00400000 - 0x007FFFFF , CMT , NAND
Erase area : 0x00800000 - 0x00D5FFFF , CMT , NAND
Erase area : 0x00D60000 - 0x09E5FFFF , CMT , NAND
Erase Partition
Partition 0x0A
Erase Ok...
TIME : Erase time : 00:00:01 
CFL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

Write : Processing RM-504_40.0.003_prd.core.C00
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [SOS*UPDAPP]
CMT: Writing Hash CERT [SOS*ENO]
CMT: Writing Hash CERT [SOS*DSP0]
CMT: Writing Hash CERT [SOS*ISASW]
CMT: Writing Hash CERT [SOS+CORE]
CMT: Writing Hash CERT [SOS+ROFS1]
Total writen 432 blocks
TIME : Write time : 00:01:54 
MCU Write done
CFL: Request programm status
NAND status : 00000000 / 00000000 / 00000000


   ===Flashing [PPM]===
Erase : Processing RM-504_40.0.003_prd.rofs2.V05
Erasing....
Erasing Data....
Erase area : 0x07360000 - 0x0935FFFF , CMT , NAND
Erase Ok...
TIME : Erase time : 00:00:00 
CFL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

Write : Processing RM-504_40.0.003_prd.rofs2.V05
CMT: Writing Hash CERT [SOS+ROFS2]
Total writen 110 blocks
TIME : Write time : 00:00:30 
PPM Write done
CFL: Request programm status
NAND status : 00000000 / 00000000 / 00000000


   ===Flashing [PPM2]===
Erase : Processing RM-504_40.0.003_C01_prd.rofs3.fpsx
Erasing....
Erasing Data....
Erase area : 0x09360000 - 0x09E5FFFF , CMT , NAND
Erase Ok...
TIME : Erase time : 00:00:00 
CFL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

Write : Processing RM-504_40.0.003_C01_prd.rofs3.fpsx
CMT: Writing Hash CERT [SOS+ROFS3]
Total writen 22 blocks
TIME : Write time : 00:00:05 
PPM Write done
CFL: Request programm status
NAND status : 00000000 / 00000000 / 00000000


   ===Flashing [CNT]===
Erase : Processing RM-504_32.0.007_001_000_U002.uda.fpsx
Erasing....
Erasing Data....
Erase area : 0x09E60000 - 0x0F71FFFF , CMT , NAND
Erase Ok...
TIME : Erase time : 00:00:00 
CFL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

Write : Processing RM-504_32.0.007_001_000_U002.uda.fpsx
Total writen 10 blocks
TIME : Write time : 00:00:03 
CNT Write done
CFL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

CFL: Close_Session
Content: 000300000000000000000000000000
CFL: Reboot

Flashing done!
Total flash time : 00:02:36
Reboot phone now...

Reading Phone Info....
Connected phone -   Nokia 5530 XpressMusic
Software Info:     V ICPR72_10w29_tube1 24-05-11 RM-504 (c) Nokia
IMEI:  12345610654321?
Ape Version: V 40.0.003
Product code:  
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Processing After Flash Defaults...
FullFactorySet... Ok!
UserDataDefaultsSet...OK!
ServiceDefaultsSet... Ok!
LeaveDefaultsSet... Ok!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Product code update...
Battery voltage is enough for start
Set phone to Normal mode...

AfterFlash operations done ;D
Done!

Elapsed: 00:02:57
Connect phone on selected interface...

Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
SimLock Data found!
SimLock key found!
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID:       000000010000022600010006400C192101051105
CPU ID :       RAPIDOv11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00000296
EM1 ID:        00000B22
PUBLIC ID:     0F8000054F880052F191B07E5883DE5347C30809
ASIC MODE ID:  00
ROOT KEY HASH: B8C3ADECFC997FCD8081D3DEAF870B8C
ROM ID:        4B9B75103E691FF8
Use URAPIDOv11_2nd.fg  ,  Rev : 2.0  Ver : 12.8.0 
Processing RAWLOADER...
FLIC : 00400020
Req : XSR 1.5
Use URAPIDOv11_XSR15_alg.fg  ,  Rev : 2.0  Ver : 12.8.0 
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:00 
Reopening the connection...
CFL: Wait for Loader take control  ...
CFL: Check mode
Phone ready, boot Ok
TransReq set Ok
PAPUBkeys : F2B05364E563A348608C1C3C9E54FE42AAAA1ACF

ADL: Preparing for write certificates...

Erase NPC... Ok
Writing NPC... Ok
Erase CCC... Ok
Writing CCC... Ok
Erase HWC... Ok
Writing HWC... Ok

ADL: Writing Flash certs done! :)

CFL: Close_Session
Content: 000300000000000000000000000000
CFL: Reboot
Wait, reconneting...

Writing SimLock Key...   Error!
Writing SimLock Data...  Error!
Product Code Update : 0578172

SDD Key status : SDData Damaged!!!!! :(
SimLock status : SimLock Damaged!!!!! :(
Security status : Security is Ok


Done!

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info...  - Ok

Checking StartUp data ...
-----------------------

SDD Key status : SDData Damaged!!!!! :(
 - > Do REPAIR SDD , Local SX4 if needed 

CMLA Key status : CMLA key Not exist

SimLock status : SimLock Damaged!!!!! :(
 - > Do REPAIR SL if it SL2/SL phone, if SL3 - Help Only Backup Or RPL

Security status : Security is Ok
-----------------------

PA_SimLock Version : 
PA_SL30 phone detected ,  SP_CODE_LEN : 20 

Done!