****************************************************************
   *   Before executing, be sure to delete recovery-from-boot.p   *
   *          from /system to ensure recovery will stick          *
   ****************************************************************

   ****************************************
   *   Reboot your tablet into APX mode   *
   ****************************************

Generate your SBK with your CPUID from here :
http://vache-android.com/v1/index.php?site=sbk

Enter your SBK:0x08A11E00 0x3796DB01 0x77DC3F03 0x10292103
Nvflash started
rcm version 0X20001
System Information:
   chip name: t20
   chip id: 0x20 major: 1 minor: 4
   chip sku: 0x8
   chip uid: 0x03806148420063d7
   macrovision: disabled
   hdcp: enabled
   sbk burned: true
   dk burned: true
   boot device: emmc
   operating mode: 4
   device config strap: 0
   device config fuse: 0
   sdram config strap: 0

sending file: flash.bct
- 4080/4080 bytes sent
flash.bct sent successfully
odm data: 0xb00d8011
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: bootloader.bin
| 714409/714409 bytes sent
bootloader.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
setting device: 2 3
creating partition: BCT
creating partition: PT
creating partition: APP
creating partition: EBT
creating partition: GP1
creating partition: SOS
creating partition: LNX
creating partition: CAC
creating partition: MSC
creating partition: FLX
creating partition: AKB
creating partition: UDA
creating partition: GPT
Formatting partition 2 BCT please wait.. FAILED!
command failure: create failed (bad data)
bootloader status: partition table is required for this command (code: 8) messag
e: nverror:0x4 (0x4) flags: 0

Для продолжения нажмите любую клавишу . . .