Connect phone on selected interface...

Test mode set
Searching for phonebook...
Initialising FS...
Skip check FS...
Use direct acces mode, skip search
Initialise Reading...
-> Major read error [unexcepted data], nothing to save
Error

Elapsed: 00:00:00

Phone found!
Series 40 Device detected! 
read info...  - Ok

Phone disconected!

Connect phone on selected interface...

Read and Check phone data...
BB5 bus checking...
Setting FlashMode
FlashMode set Ok
No answer from phone... :(
 - > 1. Check cable/connection, try again
 - > 2. Maybe HW fault or bad cable

Read and Check phone data...
BB5 bus checking...
Setting FlashMode
FlashMode set Ok
No answer from phone... :(
 - > 1. Check cable/connection, try again
 - > 2. Maybe HW fault or bad cable

Reading Phone Info....
SW ver  : Error
IMEI    :      Error
PPM     :      Error
DSP Ver :      3.50
PCode   :      0519583
BPCode  :      0511637
HWID    :      6003
LCDVer  :      
IMEI    :      Error
Sl Conf  : 001-01-00000000000
Sl Prof  : 000000000000000-5
Sl Aux   : 00055555
Hw Sig   : A977A0327E8CCFA2
Provider : Default Test Operator

Lock info:
Block 1
L1:Close;  L2:Close;  L3:Close;  L4:Close;  L5:Close;  
Block 2
L1:Close;  L2:Close;  L3:Close;  L4:Close;  L5:Close;  
Block 3
L1:Close;  L2:Close;  L3:Close;  L4:Close;  L5:Close;  
Block 4
L1:Close;  L2:Close;  L3:Close;  L4:Close;  L5:Close;  
Block 5
L1:Close;  L2:Close;  L3:Close;  L4:Close;  L5:Close;  
Block 6
L1:Close;  L2:Close;  L3:Close;  L4:Close;  L5:Close;  
Block 7
L1:Close;  L2:Close;  L3:Close;  L4:Close;  L5:Close;  

Done!

Phone found!
Series 40 Device detected! 
read info...  - Ok

Phone disconected!

Connect phone on selected interface...

Test mode set
Searching for phonebook...
Initialising FS...
Skip check FS...
Use direct acces mode, skip search
Initialise Reading...
-> Major read error [unexcepted data], nothing to save
Error

Elapsed: 00:00:00