<ID:0/184> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOT_B5510XXKJ2_REV03.tar.md5 is valid.
<OSM> PDA_B5510XXKJ3_REV03.tar.md5 is valid.
<OSM> MODEM_B5510XXKJ2_REV03.tar.md5 is valid.
<OSM> GT-B5510-MULTI-CSC-OXEKJ2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/184> Odin v.3 engine (ID:184)..
<ID:0/184> File analysis..
<ID:0/184> SetupConnection..
<ID:0/184> Initialzation..
<ID:0/184> Set PIT file..
<ID:0/184> DO NOT TURN OFF TARGET!!
<ID:0/184> Get PIT for mapping..
<ID:0/184> Firmware update start..
<ID:0/184> BcmBoot.img
<ID:0/184> NAND Write Start!! 
<ID:0/184> Sbl.bin
<ID:0/184> boot.img
<ID:0/184> system.img
<ID:0/184> userdata.img
<ID:0/184> param.lfs
<ID:0/184> efs.img
<ID:0/184> BcmCP.img
<ID:0/184> Transmission Complete.. 
<ID:0/184> Now Writing.. Please wait about 2 minutes
<ID:0/184> Receive Response form LOKE
<ID:0/184> csc.rfs
<ID:0/184> RQT_CLOSE !!
<ID:0/184> RES OK !!
<ID:0/184> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/184> Removed!!