COM7 [ProlificSerial2] selected
module  v4.08
Device: _Autodetect MT6205-6239 NOR
Checking data, wait...
advanced flash detection enabled
Action: write flash
"smart write" active
write: Firmware
editor_corrected_IFLY23D_GEMINI_ULC_09A_PCB01_GSM_MT6223_S00.F168_F0_WD12_100526_00_SPAN1_TXD__fullflash_20111117-174734.B0M.bin.B0M.bin
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
ffs/eeprom backup enabled, it may takes several minutes !
====>  Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6223:8A08]...
CPU: MT6223
high speed boot On
chip: 0011:4199:000C
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
====>  Initialize ...
detecting chip #00 in region #00...
flash: 01327E32433200:2BEA0000000000
flash: AMD/Fujitsu std [T 007Fx020000 0004x008000] 16Mb
otp offset: 00FE0000
detecting chip #01 in region #00...
flash: 01327E32433200:2BEA0000000000
flash: AMD/Fujitsu std [T 007Fx020000 0004x008000] 16Mb
otp offset: 00FE0000
detecting chip #02 in region #00...
flash: 01327E32433200:2BEA0000000000
flash: AMD/Fujitsu std [T 007Fx020000 0004x008000] 16Mb
otp offset: 00FE0000
detecting chip #03 in region #00...
flash: 01327E32433200:2BEA0000000000
flash: AMD/Fujitsu std [T 007Fx020000 0004x008000] 16Mb
otp offset: 00FE0000
number of flash chip/regions detected: 04/01
Initialize Done
====>  Set baud ...
921600
Set baud Done
====>  Initialize bootcode ...
interesting cpu type found
Initialize bootcode Done
====>  Check firmware integrity ...
device parameters detection in progress...
detecting chip #00 in region #00...
flash: 01327E32433200:2BEA0000000000
flash: AMD/Fujitsu std [T 007Fx020000 0004x008000] 16Mb
otp offset: 00FE0000
detecting chip #01 in region #00...
flash: 01327E32433200:2BEA0000000000
flash: AMD/Fujitsu std [T 007Fx020000 0004x008000] 16Mb
otp offset: 00FE0000
it's time to stop: 2B0000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
usb bootloader detect...
..
usb bootloader detect (phase #2)...
..
usb bootloader (chip) is absent
searching rom info...
search rom info finished
rom info structure: [standard] type (07)
TCL-ID is absent
====================
New firmware found (v.4.08, database date: 17.11.2011): 
IFLY23D_GEMINI_ULC_09A_PCB01_GSM_MT6223_S00.F168_F0_WD12_100526_00_SPAN1_TXD.BIN

This firmware is missing in support area. If this phone is good and working:

- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support: [email protected] or upload files to http://rapidshare.com or http://4shared.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
rom info detection finished
rom info ver: 07
sw version: IFLY23D_GEMINI_ULC_09A_PCB01_GSM_MT6223_S00.F168_F0_WD12_100526_00_SPAN1_TXD.BIN
project-id: F168.F0.WD12.100526.00.SPAN1.TXD, 00000000
code offset: 00000000
ffs offset/size [02]: 00E00000/00200000
rom info structure: [standard] type (07)
TCL-ID is absent
detecting ffs/eeprom area in 1 chip(s)...
standard ffs/eeprom offset detected: 00E00000
standard ffs/eeprom offset confirmed: 00E00000
detecting ffs/eeprom size...
ffs/eeprom size: 00200000
ffs/eeprom chip: 00
ffs/eeprom area: 00000000:00E00000-00FFFFFF
firmware area: 00000000-00DFFFFF
sec info (detailed) detection...
searching sec info#1...
.
search sec info#1 finished
Check firmware integrity Done
====>  Check firmware content ...
Check firmware content Done
====>  Backup required data ...
reading: IFLY23D_GEMINI_ULC_09A_PCB01_GSM_MT6223_S00.F168_F0_WD12_100526_00_SPAN1_TXD__ffs...
file saved: C:\Documents and Settings\DrManila\Ðàáî÷èé ñòîë\C2_kit\IFLY23D_GEMINI_ULC_09A_PCB01_GSM_MT6223_S00.F168_F0_WD12_100526_00_SPAN1_TXD__ffs_20111117-175220.B0E.bin
flash: 01327E32433200:2BEA0000000000
Backup required data Done
====>  Patch required data ...
Patch required data Done
====>  Special operation ...
Special operation Done
====>  Write ...
sec info (fast) detection...
searching sec info#1...
.
search sec info#1 finished
usb bootloader (file) is absent
startup code area #1 check...
done
detecting startup code area #2...
startup code area #2 is absent
Area: Firmware
flash: 01327E32433200:2BEA0000000000
Write: Firmware
error: no any expected answer
error: flash write error: 00320000:00002000
error: write operation failed
Write Fail
Finished, time used: 1 min 35 sec
Remove/Install battery now !