Connection opened successfully
DBG : F00A1FB300020303010100FF
CPUID : SGOLD 213
2nd boot Ok, 01
2nd ready, AA
Sending Algo
Algo sent Ok
BL : Quantum_Bootloader_10.46_M1S1
Speed accepted, use 6.500.000
FLASHID : EC001230
FLIC conf set, RST set
Boot done!

===Flashing [MCU]===
File : rm702__06.51.mcusw
Image : rm702__06.51.mcusw_ebl_psi.fls
Cert block found, sending....
Cert not accepted [4E0141]
Error...
-> Check cable, flashfile

Connect phone on selected interface...


Elapsed: 00:00:09
Connect phone on selected interface...

Core version : 1.27 Rev : 1.0

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
PPM : rm702__06.51.ppm_r
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...

-> If Windows say "Unrecognized device" - just reinsert battery
-> If flashing freeze - reinsert cable and try again
--- Press phone's power button or insert charger! ---

Connection opened successfully
DBG : F00A1FB300020303010100FF
CPUID : SGOLD 213
2nd boot Ok, 01
2nd ready, AA
Sending Algo
Algo sent Ok
BL : Quantum_Bootloader_10.46_M1S1
Speed accepted, use 6.500.000
FLASHID : EC001230
FLIC conf set, RST set
Boot done!

===Flashing [PPM]===
File : rm702__06.51.ppm_r
Image : package_r.ppm_ebl_psi.fls
Cert block found, sending....
Cert sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x41DC0000 , Len : 0x00700000
Erasing, wait ...
Erase done, time : 00:00:03
Write , Start : 0x41DC0000 , Len : 0x0059FFC4
Flashing , wait ...
Region flash done, time : 00:00:06

Flashing done!
Total flash time : 00:00:10
Reboot phone now...