Connect phone on selected interface...

Press and hold "U" button and insert cable!
Waiting for NOLO...
Connect in NOLO mode Ok!

Phone Info : 
Type : RX-51 , HWRev : 2204
NOLO : 01/0E/14
SWVer: RX-51_2009SE_20.2010.36-2_PR_MR0

Read info Ok

Core RX-51_2009SE_20.2010.36-2_PR_COMBINED_MR0_ARM.bin.mcusw
Processing NOL part
BLK_INF : 2nd
BLK_VER : 1.4.14.9+0m5
BLK_LEN : 0x00003980
HW TYPE : RX-51
HW REV  : 2201 , 2202 , 2203 , 2204 , 2205 , 2206 , 2207 , 2208 , 2209 , 2210 , 2211 , 2212 , 2213 , 2214 , 2215 , 2216
BLK_INF : xloader
BLK_VER : 1.4.14.9+0m5
BLK_LEN : 0x00003A00
HW TYPE : RX-51
HW REV  : 2201 , 2202 , 2203 , 2204 , 2205 , 2206 , 2207 , 2208 , 2209 , 2210 , 2211 , 2212 , 2213 , 2214 , 2215 , 2216
Processing : xloader , 1.4.14.9+0m5
BLK_INF : secondary
BLK_VER : 1.4.14.9+0m5
BLK_LEN : 0x0001AB80
HW TYPE : RX-51
HW REV  : 2201 , 2202 , 2203 , 2204 , 2205 , 2206 , 2207 , 2208 , 2209 , 2210 , 2211 , 2212 , 2213 , 2214 , 2215 , 2216
Processing : secondary , 1.4.14.9+0m5
NOL part Ok, boot flash done
Core  RX-51_2009SE_20.2010.36-2_PR_COMBINED_MR0_ARM.bin.mcusw
Processing CMT part
BLK_INF : cmt-2nd
BLK_VER : BB5_09.36
BLK_LEN : 0x00013E00
Processing : cmt-2nd , BB5_09.36
BLK_INF : cmt-algo
BLK_VER : BB5_09.36
BLK_LEN : 0x0007EE80
Processing : cmt-algo , BB5_09.36
BLK_INF : cmt-mcusw
BLK_VER : rx51_ICPR82_10w08
BLK_LEN : 0x005B0A80
Processing : cmt-mcusw , rx51_ICPR82_10w08
CMT part prepare Ok, files are send
Programm CMT request Ok
Switch  : OSSO UART+USB
Version : RX-51_2009SE_20.2010.36-2_PR_MR0
Switch CMT request Ok
CMT : Erasing...
CMT : Programm...
CMT : Programm Finished!