[CERT_PROG_DATA_OUT_CMT]
NPC_DATA_1=CBFC673F000041500000000000000000000000000000000000000000303534343035360000000000
NPC_DATA_2=0000000000000000000000000451E0950E161947993A0700646F7242000000000BD001055EDC0154
NPC_DATA_3=E77D2AE290113B6DEC107DC15E8D0D504A0902E261268C14FCD8A2C9093523BC96EA4BA465A3FC08
NPC_DATA_4=34C544E75135C646A2FF4561000000000000000000000000000000000200000047534D0000000000
NPC_DATA_5=3385360471414229FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF42545F4944000000
NPC_DATA_6=6812B16E1D000000000000000000000000000000000000000000000000000000C805A4E0FA9C85A1
NPC_DATA_7=EE2528DA1D8C6848D47A480FE76779B8DFF389B96E9B7CDC21A99F46CF7944BCFF1E83CE9B4E2F23
NPC_DATA_8=3400C609492B64BD45BF46F052F87735AB14F5BF04F91DCA784545F2E797E8F9219DE55DE11C3F5E
NPC_DATA_9=66EB361A4A417B6EC75A7B597B5F43273BDE6DF991F27873C9D8CB9B31607A2E6C0B6A334B495D4F
VARIANT_DATA_1=357043A5020041500100000030353339323739430033E0934C71CE4437005600D826990000000000
VARIANT_DATA_2=0800000022000000000000000000000019E8CA2D099E0E05AED5190E3E1D62AA20958CA6ACB40FB1
VARIANT_DATA_3=8BB0A7E2A0A5C43FCFC214DB0BE6C7C6B7CE1FD998418C8BEACC16FEDC691AD3BE5786AF5C87D26A
VARIANT_DATA_4=2013FA5344C5A9A2539398F5D5E79E344285B9288374FDB450F76101423D4D4B1D15CCF608AF231E
VARIANT_DATA_5=9871616D1A4E75005DFE375611D1F890B0892B2F380E3C51FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF

Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
Variant Data found!
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

APE part info : 
APE ASICID   : 17100708
APE MODE ID : 00
APE PUB ID    : 776B50EEC3E9AAA27967A7425133FB7B926A8E78
APE R_HASH  : 49A97E826B93BA20B7ED0B082475C005
APE ROM ID  : 1DFD66132C872FD4

CMT part info : 
CMT ASICID   : 000000010000022600010006010C192101003000
CMT EM0 ID  : 00000295
CMT EM1 ID  : 00000B22
CMT PUB ID  : 0BD001055EDC0154E77D2AE290113B6DEC107DC1
CMT MODE ID : 00
CMT R_HASH  : BAF3A9C3DBFA8454937DB77F2B8852B1
CMT ROM ID  : 273F6D55DFAAF68F

CMT : Sending 2nd loader...
Use : RAP3Gv3_2nd.fg  ,  Rev : 0.0  Ver : 10.42.0 
CMT Loader sent, Boot Ok
MCU Configuration
MCU Cfg Ok , 03
FLASHID : 22E800EC , CMT , NOR
CMT Flash ID : 22E800EC < SAMSUNG [SEC] => K5G2829ATC
FLCNT   : 00000000000000000000000000000000000000
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAP3Gv3_algo.fg  ,  Rev : 0.0  Ver : 10.40.0 
CMT Algo sent
CMT PAPUB : 5E8D0D504A0902E261268C14FCD8A2C9093523BCBD
Transmission mode :  Dual (Ddr, TX2) 

Boot Done!

Preparing for write certificates...

Switching to CMT... 

CMT : NPC erase Ok
Writing NPC... Ok

CMT : VARIANT erase Ok
Writing VARIANT... Ok


Done!

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info...  - Ok

Local SX4 procedure started...

Phone Imei: 358634017142492
Use custom key...
Step 1...
Step 2...
Step 3...
SX4 Auth - Ok
Upload PM checked
Uploading RF/Battery tune to phone...
Using : RM-133.pm
Operating mode is OK, no need change...

Field 1
   Record 0 write - Ok
   Record 2 write - Ok
   Record 4 write - Ok
   Record 6 write - Ok
   Record 8 write - Ok
   Record 13 write - Ok
   Record 16 write - Ok
   Record 18 write - Ok
   Record 20 write - Ok
   Record 22 write - Ok
   Record 23 write - Ok
   Record 24 write - Ok
   Record 25 write - Ok
   Record 26 write - Ok
   Record 28 write - Ok
   Record 29 write - Ok
   Record 31 write - Ok
   Record 33 write - Ok
   Record 34 write - Ok
   Record 44 write - Ok
Field 309
   Record 0 write - Ok
   Record 1 write - Ok
   Record 2 write - Ok
   Record 4 write - Ok
   Record 5 write - Ok
   Record 7 write - Ok
   Record 8 write - Ok
   Record 17 write - Ok
   Record 22 write - Ok

Check ST_SECURITY now...
Security status : ST_SECURITY => DAMAGED :(

Done!

Elapsed: 00:00:19

Upload done