Re: Nokia C7 белый экран после флеширования, как восстановить?
#11
Подниму тему. Есть подобная Nokia. Пришла висящей на заставке Nokia в течение 5-ти минут, потом уходит в перезагруз. Была прошита по USB версией 14.002 (правда не BEST-ом, а Cyclone), local и Test режимы есть. Шьется без ошибок. Сертификаты пробовал стирать, далее прошивать, - результат - тот же: доходит до заставки с надписью Nokia и висит. В сети не могу найти файл контента диска E: (rm675_008_000_m008_8gb.fpsx). По железу сделано: перекатан бутерброд, пропаяна с пошатыванием Gazoo. Результата снова нет.
Может есть у кого файл
rm675_008_000_m008_8gb.fpsx?
Логи:
Код:
Booting CMT...
[Nokia USB Flashing Generic]: Port opened OK!
Old ROM Detected
CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102031104
CMT_EM_ASIC_ID: 00001040
CMT_EM_ASIC_ID: 00001030
CMT_PUBLIC_ID: 04C00109ED8E03447D9B53634D127F453F7F1A5B
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 916F75217F32081248B15C38DFC8E81B
CMT_BOOT_ROM_CRC: E693EF0D
CMT_SECURE_ROM_CRC: AC22615B
CMT Ready!
RM-675_014.002_79.92_prd.core.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
Searching for BootCode: DualLine 32Bit
RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.10.48.1, Algo: BB5
Using NEW BB5 FLASHING PROTOCOL
Waiting for USB Boot ROM Answer...
ROM Ret: 0xFFFD125D
ROM CMT dwAddr: 0x10004FF0
ROM CMT dwLength: 0x00627837
Seems ROM Initialized OK!
Transmission Mode Requested: Control USB, Accepted: Control USB
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC006800000131, Samsung, ONENAND
Requested Algorithm: XSR 1.6 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC0068 (Samsung), Size: 1024MBytes, VPP: Not Supported
RAPUv11_XSR17_alg.fg, Type: Algorithm, Rev: 768.10.48.1, Algo: XSR 1.6
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Transmission Mode Requested: Bulk USB, Accepted: Bulk USB
Box TX2 Data Pin set to: Service Pin 3
Waiting for FUR Client become avaiable...
[Nokia USB Flashing Generic]: Port opened OK!
FUR Avaiable!
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Overriding VPP Setting, USB can't use VPP
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 95A68E9FA27B2BFA89EA204FC846EB73DEF1D93F
Sending Certificates...
Certificates OK
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,CMT]: 0x00040000-0x0007FFFF, ONENAND
EraseArea[0,CMT]: 0x000C0000-0x008BFFFF, ONENAND
EraseArea[0,CMT]: 0x00DC0000-0x0E97FFFF, ONENAND
EraseArea[0,CMT]: 0x2E100000-0x3E5FFFFF, ONENAND
Erase Partition (CMT)
Waiting 320s for erasure finish...
Erase taken 2.109s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT ADA Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT RAP3NAND Certificate...
Writing CMT SOS+PMML Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT GENIO_INIT Certificate...
Writing CMT SOS*UPDAPP Certificate...
Writing CMT SOS*DSP0 Certificate...
Writing CMT LDSP Certificate...
Writing CMT SOS*ISASW Certificate...
Writing CMT SOS+CORE Certificate...
Writing CMT SOS+ROFS1 Certificate...
Programming Status OK!
All blocks written OK! Time taken 18.954s
Flashing Speed: 57144,74 kBit/S
Processing RM-675_014.002_79.92_prd.core.fpsx (APE)...
Processing RM-675_014.002_04.01_Russian_79.92_prd.rofs2.fpsx (CMT)...
RM-675_014.002_04.01_Russian_79.92_prd.rofs2.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
PAPUBKEYS Hash for CMT: 95A68E9FA27B2BFA89EA204FC846EB73DEF1D93F
Started group flash erase
EraseArea[0,CMT]: 0x09F40000-0x0DA7FFFF, ONENAND
Waiting 320s for erasure finish...
Erase taken 0.266s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT SOS+ROFS2 Certificate...
Programming Status OK!
All blocks written OK! Time taken 4.688s
Flashing Speed: 70322,61 kBit/S
Processing RM-675_014.002_04.01_Russian_79.92_prd.rofs2.fpsx (APE)...
Processing RM-675_014.002_00.01_79.92_prd.rofs3.fpsx (CMT)...
RM-675_014.002_00.01_79.92_prd.rofs3.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
PAPUBKEYS Hash for CMT: 95A68E9FA27B2BFA89EA204FC846EB73DEF1D93F
Started group flash erase
EraseArea[0,CMT]: 0x0DA80000-0x0E97FFFF, ONENAND
Waiting 320s for erasure finish...
Erase taken 0.63s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT SOS+ROFS3 Certificate...
Programming Status OK!
All blocks written OK! Time taken 0.282s
Flashing Speed: 139,35 kBit/S
Processing RM-675_014.002_00.01_79.92_prd.rofs3.fpsx (APE)...
Processing RM-675_013.016_U01.01_79.92_prd.uda.fpsx (CMT)...
RM-675_013.016_U01.01_79.92_prd.uda.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
PAPUBKEYS Hash for CMT: 95A68E9FA27B2BFA89EA204FC846EB73DEF1D93F
Started group flash erase
EraseArea[0,CMT]: 0x0E980000-0x2E0FFFFF, ONENAND
Waiting 320s for erasure finish...
Erase taken 2.172s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Programming Status OK!
All blocks written OK! Time taken 11.875s
Flashing Speed: 51708,36 kBit/S
Processing RM-675_013.016_U01.01_79.92_prd.uda.fpsx (APE)...
Restarting MCU...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
[Nokia C7-00 USB Phonet]: Port opened OK!
[Nokia C7-00 USB Phonet]: Port opened OK!
[Nokia C7-00 USB Phonet]: Port opened OK!
[Nokia C7-00 USB Phonet]: Port opened OK!
[Nokia C7-00 USB Phonet]: Port opened OK!
Factory defaults OK
Reading info...
[Nokia C7-00 USB Phonet]: Port opened OK!
MCU Version V 92PS1_10w46.9
MCU Date 01-03-11
Product RM-675 (Nokia C7-00)
Manufacturer (c) Nokia
IMEI 355379049286643
Mastercode 3526546574
IMEI Spare 3A55730994826604
IMEI SV 3355730994826604F8000000
PSN CTK607782
Product Code 059D7K9
Module Code 0204505
Basic Product Code 0595319
PSD 0000000000000000
LPSN 0
WLAN MAC FCE557F729D2
APE SW 014.002
APE Variant 014.002.00.01014.002.04.01014.002.00.01
APE Test rm675_ENO_v_0.0308
APE HW 256
APE ADSP 256
APE BT HCI Version 4 (rev. 0). LMP Version 4 (rev. 7455). Manufacturer 13.
RETU 40
TAHVO 00
AHNE 11
HW 6010
RFIC |Alli_4.3.4
DSP TB92PS1_10w46.4
Simlock Server SIMLOCK SERVER
Simlock Key 2440700000000000
Simlock Profile 0000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [1,2] State: OPENED Type: GID Data: FFFF
Simlock [1,3] State: OPENED Type: GID Data: FFFF
Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [2,2] State: OPENED Type: GID Data: FFFF
Simlock [2,3] State: OPENED Type: GID Data: FFFF
Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [3,2] State: OPENED Type: GID Data: FFFF
Simlock [3,3] State: OPENED Type: GID Data: FFFF
Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [4,2] State: OPENED Type: GID Data: FFFF
Simlock [4,3] State: OPENED Type: GID Data: FFFF
Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [5,2] State: OPENED Type: GID Data: FFFF
Simlock [5,3] State: OPENED Type: GID Data: FFFF
Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [6,2] State: OPENED Type: GID Data: FFFF
Simlock [6,3] State: OPENED Type: GID Data: FFFF
Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [7,2] State: OPENED Type: GID Data: FFFF
Simlock [7,3] State: OPENED Type: GID Data: FFFF
Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Selftest (подключалась только плата с дисплее и неродным АКБ):
Код:
[Nokia C7-00 USB Phonet]: Port opened OK!
Selftests to proceed: 50
Passed ST_SLEEP_X_LOOP_TEST
Passed ST_UEM_CBUS_IF_TEST
Passed ST_EAR_DATA_LOOP_TEST
Passed ST_SIM_CLK_LOOP_TEST
Passed ST_SIM_LOCK_TEST
Passed ST_SECURITY_TEST
Passed ST_PWR_KEY_TEST
Passed ST_CURRENT_CONS_TEST
Passed ST_HOOKINT_TEST
Failed ST_BTEMP_TEST
Passed ST_KELVIN_BATVOLTAGE_TEST
Passed ST_KELVIN_VIBRA_TEST
Passed ST_KELVIN_CAPACITOR_TEST
Passed ST_KELVIN_MISC_TEST
Passed ST_KELVIN_AUDIO_TEST
Passed ST_KELVIN_XEAR_TEST
Passed ST_USB_CHARGING_TEST
Failed ST_DIGIMIC_TEST
Passed ST_LED_CONTROLLER_TEST
Passed ST_AUDIO_PLL_TEST
Passed ST_RAM_IF_TEST
Passed ST_CDSP_SLEEPCLOCK_FREQ_TEST
Passed ST_CDSP_RF_BB_IF_TEST
Passed ST_CDSP_STROBE_TEST
Passed ST_CDSP_DIGI_RXTX_IF_TEST
Passed ST_CDSP_RF_SUPPLY_TEST
Passed ST_CDSP_PA_ID_PIN_TEST
Passed ST_CDSP_WCDMA_TX_POWER_TEST
Passed ST_KEYBOARD_STUCK_TEST
Passed ST_LPRF_IF_TEST
Failed ST_CAMERA_IF_TEST
Passed ST_CAMERA_ACCELERATOR_TEST
Failed ST_SEC_CAMERA_IF_TEST
Failed ST_LED_FLASH_TEST
Passed ST_LPRF_AUDIO_LINES_TEST
Passed ST_MAIN_LCD_IF_TEST
Failed ST_TOUCH_TEST
Failed ST_TOUCH_IF_TEST
Passed ST_BT_WAKEUP_TEST
Passed ST_WLAN_TEST
Passed ST_MASS_MEMORY_IF_TEST
Passed ST_ACCEL_IF_TEST
Passed ST_VIBRA_TEST
Passed ST_USB_LOOP_TEST
Failed ST_MAGNETOMETER_TEST
Passed ST_USB_CHARGER_TEST
Passed ST_LED_FLASH_IF_TEST
Passed ST_NFC_TEST
Failed ST_NFC_ANTENNA_TEST
Failed ST_PROXIMITY_TEST
Stresstest проходит нормально, до 47 пункта, при этом плата разогревается до 80 градусов.
Ура. Проблема решена:
Скрытый текст (вы должны войти под своим логином или зарегистрироваться и иметь 100 сообщение(ий)):
|
У вас нет прав чтобы видеть скрытый текст, содержащейся здесь.
|