Re: Не удается восстановить I740 PDA
#4
Resurrection help читали
внимательно?
Цитата:
Samsung i740 PDA is based on the PXA312 Processor.
To repair PDA or (and) Modem parts battery is not required; using the USB data cable is enough to power the phone.
To resurrect a dead i740 PDA please do:
Ø Solder JTAG cable to i740 PDA pads;
Ø Connect USB cable to phone and PC;
Ø Make sure Samsung i740 PDA is selected in the list of models, then click Resurrect button;
Ø Resurrection sequence starts flashing the PDA memory;
Ø Software will signal successful operation completion;
Ø disconnect USB cable, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
|
Питание от батареи или внешнего источника не требуется...
Кстати, JTAG Manager есть уже поновее - версии 1.30, да и прошивку в боксе можно было б обновить до версии 1.22.