Re: Тестирование Новых возможностей BEST'a -II
#218
принесли 5330 не работает камера, телефон на гарантии, разбирать не дали.
чтение RPL по USB:
Код:
Connect phone on selected interface...
Phone found!
Series 40 Device detected!
read info... - Ok
Reading ASK request file...
Saved to: C:\InfinityBox\BEST\35831303XXXXXXX.ask
Done!
Backup Certificates now...
Backup CRT308 data...
CRT308 Backup Created... :)
Check communication with phone....
Reboot....
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000010000022600000001020C192102044100
EM0 ID: 00001040
EM1 ID: 00001030
PUBLIC ID: 19800210ED2E00490E0C2735013187FD01A5A182
ASIC MODE ID: 00
ROOT KEY HASH: 7B045400E1752022F9EB80B0DEA9C65D
ROM ID: 67E82268F29CEA60
Use RAP3Gv40_2nd.fg , Rev : 3.0 Ver : 11.4.0
Processing RAWLOADER...
FLIC : 003000EC
Req : XSR 1.6
Use RAP3Gv40_XSR17_alg.fg , Rev : 3.0 Ver : 11.4.0
Boot Done! :)
TIME : Boot time : 00:00:05
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
ADL: Reading certificates...
Reading NPC certificate...
IMEI : 35831303XXXXXXX
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Cert Read done!
ADL: Reading certificates done! :)
ADL: Close_Session
Content: 000300000000010000000100000000
ADL: Reboot
NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
SimLock Data saved...
SimLock Key saved...
WMDRM_PD Data saved...
RPL saved : c:\InfinityBox\BEST\Backup\Cert\35831303XXXXXXX.rpl
All done, Disconnecting
Elapsed: 00:00:13
чтение инфо:
Код:
Connect phone on selected interface...
Phone found!
Series 40 Device detected!
read info... - Ok
Reading Phone Info....
Connected phone - Nokia 5330-1d
Software ver : V 06.88 31-05-10 RM-615 (c) Nokia
IMEI : 35831303XXXXXXX
Ape Ver :
APE Var :
APE ADSP:
DSP Ver : ICPR91_10w04_1
APE Test:
PPM : V 06.88 31-05-10 RM-615 (c) Nokia I
CNT : Content: i_0592296 V 06.88 31-05-10 RM-615 (c) Nokia
Product SN : CUD951451
Product code : 0592296
Base Prd.code: 0587862
Module code : 0204444
Long Prod.SN : 0
Hardware info=======
HWID : 0422
Retu : 40
Tahvo : 00
Batery: 3898 mV
Camera:
CMT BT: 1673-46034
APE BT:
APE HW:
LCDVer: SEIKO
RF ic :
Lock info ===========
IMEI : 35831303XXXXXXX
IMEI spNet : 3A 85 13 03 XX XX XX
IMEI svNet : 33 85 13 03 XX XX XX XX XX
Conf key : 0000000000000000
Provider key : 2440700000000000
Provider : AT&T;U.S.A. (3650)
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 7
LOCK STATUS :
=============================
BLK : 1
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS : All Open
=============================
CRT308 Backup Created... :)
User Code : 12345
MMC pwd : no any record found
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery]
Done!
тут все хорошо,
далее камера
селф-тест ошибки на
Код:
PASSED | ST_KELVIN_XEAR_TEST
MINOR | ST_LED_FLASH_TEST
PASSED | ST_DIGIMIC_TEST
PASSED | ST_HEADSET_AMPLIFIER_TEST
PASSED | ST_LED_CONTROLLER_TEST
->ERROR | ST_NAVISCROLL_TEST_TEST -нигде не нашел расшифровки
PASSED | ST_DVBH_TEST
Код:
Try Read Camera Configuration to base...
Camera HW : NI00IIIIRR0301035420
Camera configuration exist, skip saving...
Cam 2 configuration not found
Done!
Checking Camera Configuration...
Operating mode is OK, no need change...
CAM1 HW : NI00IIIIRR0301035420
CAM1 SW ver : 003009
Up****** Camera #1 Configuration...
Upload done, checking...
CAM1 SW ver : 003008
Configuration Ok!
Secondary Camera #2 configuration info not exist
Done!
почему произошла замена с 003009 на 003008 ? принципиаольной разницы нет между 003009 и 003008 версиями?
после перезагрузки в нормальный режим из TEST MODE Best выдал "divizion by zero".. может телефон не дождался, после этого телефон так и не опознался в BEST, через PC Suite телефон видиться. только после перезапуска BEST телефон снова увиделся.
Камера так и не заработала,скорее всего что-то аппаратное, поедет телефон на гарантию
