card found: S/N xxxxxxx
registered to: aq7

Connect phone on selected interface...

Core version : 1.16 , Rev : 2.1

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm618__04.90.mcusw
PPM : rm618__04.90.ppm_cib
CNT : rm618__04.90.image_cib_059B9C1_003
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID:       000000000000000022000509200C0000
EM0 ID:        00005361
PUBLIC ID:     0000000000C9D30B181BF2C76D92FED4D785493D
ASIC MODE ID:  00
ROOT KEY HASH: 1B0D74C532CA1C6133940C740E8C786E
ROM ID:        DE56D582BDDE7A3A
Use BCM21351_usb2nd.fg  ,  Rev : 2.1  Ver : 10.50.0 
Processing RAWLOADER...
FLIC : 00300020
Req : XSR 1.6
Use BCM21351_XSR16_usbalg.fg  ,  Rev : 2.1  Ver : 10.50.0 
Boot Done! :)
TIME : Boot time : 00:00:01 
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
ADL: phone is in flash mode

Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 354854046275857
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Cert Read done!

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : E:\Documents and Settings\Администратор\Рабочий стол\прошивальщики\Best\Backup\Cert\354854046275857_CRT.rpl

   ===Flashing [MCU]===
Erase : Processing rm618__04.90.mcusw
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00 
Write : Processing rm618__04.90.mcusw
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [ISA+DYNSW]
CMT: Writing Hash CERT [MCUSW]
CMT: Writing Hash CERT [MCUSW1]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [UPDAPP]
Total writen 506 blocks
TIME : Write time : 00:00:06 
MCU Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

   ===Flashing [PPM]===
Erase : Processing rm618__04.90.ppm_cib
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00 
Write : Processing rm618__04.90.ppm_cib
Total writen 113 blocks
TIME : Write time : 00:00:01 
PPM Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

   ===Flashing [CNT]===
Erase : Processing rm618__04.90.image_cib_059B9C1_003
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01 
Write : Processing rm618__04.90.image_cib_059B9C1_003
Total writen 332 blocks
TIME : Write time : 00:00:04 
CNT Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

ADL: Close_Session
Content: 000300000000000000000000000000
ADL: Reboot

Flashing done!
Total flash time : 00:00:13
Reboot phone now...

Reading Phone Info....
Connected phone -   Nokia X2-00
Software Info:     V 04.90 28-09-10 RM-618 (c) Nokia            
IMEI:  354854046275857
PPM version :   V 04.90 28-09-10 RM-618 (c) Nokia             CIB
Product code:  0595102
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
FullFactorySet...OK!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Checking User Certificates...
Total - 39 certs
Data exist, skip certificate repair...
Set phone to Normal mode...
AfterFlash operations done...
Done!

Elapsed: 00:02:33
Connect phone on selected interface...