Connect phone on selected interface...

Backup Certificates now...
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Can't verify Bootrom :( Try again...
->  Error answer from BootRom
Looks like ASIC not supported, or HW failure
Supported : RapuYama, RAP3Gv4, BroadComm
Try Flash latest SW and repeat, if phone in supported list

Core version : 1.16 , Rev : 2.1

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm470__13.10.mcusw
PPM : rm470__13.10.ppm_i
CNT : rm470__13.10_ISM_020.image_i_ru_black
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID:       000000030000022600010007600C192102011104
EM0 ID:        00000C34
EM1 ID:        00000C30
PUBLIC ID:     24F00003F87A034466B7950C95DD5FC5ADFB1524
ASIC MODE ID:  00
ROOT KEY HASH: 25B977A055BE9B5DEC0C38A2A279C695
ROM ID:        3E273BF637BE26FA
Use RAPUv11_2nd.fg  ,  Rev : 3.0  Ver : 10.50.0 
Processing RAWLOADER...
FLIC : 00400098
Use RAPUv11_XSR17_alg.fg  ,  Rev : 3.0  Ver : 10.50.0 
Boot Done! :)
TIME : Boot time : 00:00:01 
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
ADL: phone is in flash mode

Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 352696048662943
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Cert Read done!

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : C:\Best\Backup\Cert\352696048662943_CRT.rpl

   ===Flashing [MCU]===
Erase : Processing rm470__13.10.mcusw
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01 
Write : Processing rm470__13.10.mcusw
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [UPDAPP]
CMT: Writing Hash CERT [DSP0]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [MCUSW]
CMT: Writing Hash CERT [ISA+DYNSW]
Total writen 218 blocks
TIME : Write time : 00:00:04 
MCU Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

   ===Flashing [PPM]===
Erase : Processing rm470__13.10.ppm_i
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00 
Write : Processing rm470__13.10.ppm_i
Write CMT block error : 82106D00
Write CMT failed on block 42 :(

Connect phone on selected interface...


Elapsed: 00:00:15
Connect phone on selected interface...

Пробовал версией 1.07(под рукой была) все прошилось нормально