Files Set for Flashing :
MCU : rm618__04.90.mcusw
PPM : rm618__04.90.ppm_i
CNT : rm618__04.90.image_i
Flashing phone now...
Check files done...
-> SWversion check skipped : Manual mode selected
Backup CRT308 data...
CRT308 Backup Created... :)
Check communication with phone....
ADL req restart
Communication verify done... Preparing...
Gathering phone info...
Check communication with phone...
Batery valtage : 3764 mV
-> Batery voltage less, than 3,8V (3764mV). Continue at user risk
Reboot....
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID:       000000000000000022000509200C0000
EM0 ID:        00005361
PUBLIC ID:     000000000039CEFF978A4B694B13C3C8550C4339
ASIC MODE ID:  00
ROOT KEY HASH: 1B0D74C532CA1C6133940C740E8C786E
ROM ID:        DE56D582BDDE7A3A
Use BCM21351_usb2nd.fg  Rev : 2.1  Ver : 10.46.0 
Processing RAWLOADER...
FLIC : 00300020
Req : XSR 1.6
Use BCM21351_XSR16_usbalg.fg  Rev : 2.1  Ver : 10.46.0 
Boot Done! :)
TIME : Boot time : 00:00:00 
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
ADL: phone is in flash mode

Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 352699042678790
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Cert Read done!

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
SimLock Data saved...
SimLock Key saved...
WMDRM_PD Data saved...

RPL saved : I:\mobile\BOXes\Infinity\BEST\Backup\Cert\352699042678790.rpl

   ===Flashing [MCU]===
Erase : Processing rm618__04.90.mcusw
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01 
Write : Processing rm618__04.90.mcusw
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [ISA+DYNSW]
CMT: Writing Hash CERT [MCUSW]
CMT: Writing Hash CERT [MCUSW1]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [UPDAPP]
Total writen 506 blocks
TIME : Write time : 00:00:05 
MCU Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

   ===Flashing [PPM]===
Erase : Processing rm618__04.90.ppm_i
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01 
Write : Processing rm618__04.90.ppm_i
Total writen 109 blocks
TIME : Write time : 00:00:01 
PPM Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

   ===Flashing [CNT]===
Erase : Processing rm618__04.90.image_i
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01 
Write : Processing rm618__04.90.image_i
Total writen 332 blocks
TIME : Write time : 00:00:03 
CNT Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000

ADL: Close_Session
Content: 000300000000000000000000000000
ADL: Reboot

Flashing done!
Total flash time : 00:00:14
Reboot phone now...

Reading Phone Info....
Connected phone -   Nokia X2-00
Software Info:     V 04.90 28-09-10 RM-618 (c) Nokia            
IMEI:  352699042678790
PPM version :   V 04.90 28-09-10 RM-618 (c) Nokia             I
Product code:  0595068
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Checking User Certificates...
Total - 39 certs
Data exist, skip certificate repair...
AfterFlash operations done... Reconnect, wait...
Done!

Elapsed: 00:01:42
Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info...  - Ok

Phone disconected!

Connect phone on selected interface...

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info...  - Ok

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info...  - Ok

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info...  - Ok

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info...  - Ok

Connect phone on selected interface...