card found:
registered to: Garry

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info...  - Ok

Reading Phone Info....
Connected phone -    Nokia E00
Software ver : V ICPR82_09w24 12-06-09 RM-469 (c) Nokia
IMEI    :      355216033391858
Ape Ver :      021.013
APE Var :      021.013021.013.03.01021.013.221.01
APE ADSP:      256
DSP Ver :       ICPR82_09w24_RIO
APE Test:      0.068
PPM     :      
CNT     :      
Product SN   :     SEL582227
Product code :     0587587
Base Prd.code:     0565921
Module code  :     
Long Prod.SN :     0
Hardware info=======
HWID  : 6000
Retu  : 40
Tahvo : 00
Batery: 3947 mV
Camera: 
CMT BT: 
APE BT: HCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12652.
APE HW: 256
LCDVer: 
RF ic : 
Lock info ===========
IMEI       : 355216033391858
IMEI spNet : 3A 55 12 06 33 93 81 05 
IMEI svNet : 33 55 12 06 33 93 81 15 F2 

Conf key     : 0000000000000000
Provider key : 2440700000000000
Provider    : AT&T;U.S.A. (3650)
Counters   : Key 0  [3] , Fbus 0  [10]
Blocks      : 7

LOCK STATUS :
=============================
BLK : 1
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
 Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS :  All Open
=============================
CRT308 Backup Created... :)

User code : Crypted
UserDataExLevel : Low [Gallery] 

Done!

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm469_034.001_prd.core.fpsx
PPM : rm469_034.001_05.01_Russian_prd.rofs2.fpsx
PPM2 : rm469_034.001_C00.01_DEFAULT_prd.rofs3.fpsx
CNT : RM469_APE_ONLY_09w23v0.073.fpsx
APE : rm469_034.001_U001.000_prd.uda.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Manual mode selected
Backup CRT308 data...
CRT308 Backup Created... :)
Check communication with phone....
ADL req restart
Communication verify done... Preparing...
Gathering phone info...
Check communication with phone...
Reboot....
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID:       000000030000022600010007600C192102011104
EM0 ID:        00001040
EM1 ID:        00001030
PUBLIC ID:     18B0000AE4610344ADFDD981D96B405867A869B1
ASIC MODE ID:  00
ROOT KEY HASH: 25B977A055BE9B5DEC0C38A2A279C695
ROM ID:        3E273BF637BE26FA
Use RAPUv11_2nd.fg  Rev : 3.0  Ver : 10.46.0 
Processing RAWLOADER...
FLIC : 00400020
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg  Rev : 3.0  Ver : 10.46.0 
Boot Done! :)
TIME : Boot time : 00:00:06 
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
ADL: phone is in flash mode

Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 355216033391858
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Cert Read done!

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
SimLock Data saved...
SimLock Key saved...
WMDRM_PD Data saved...

RPL saved : E:\Infinity\Best\BEST_v1.14.1\Backup\Cert\355216033391858.rpl

   ===Flashing [MCU]===
Erase : Processing rm469_034.001_prd.core.fpsx
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01 
Write : Processing rm469_034.001_prd.core.fpsx
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [SOS+PMML]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [SOS*UPDAPP]
CMT: Writing Hash CERT [SOS*DSP0]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [SOS*ISASW]
CMT: Writing Hash CERT [SOS+CORE]
CMT: Writing Hash CERT [SOS+ROFS1]
Total writen 419 blocks
TIME : Write time : 00:02:17 
MCU Write done
ADL: Request programm status
NAND status : 00000001 / 00000001 / 00000000

   ===Flashing [PPM]===
Erase : Processing rm469_034.001_05.01_Russian_prd.rofs2.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00 
Write : Processing rm469_034.001_05.01_Russian_prd.rofs2.fpsx
CMT: Writing Hash CERT [SOS+ROFS2]
Total writen 165 blocks
TIME : Write time : 00:00:57 
PPM Write done
ADL: Request programm status
NAND status : 00000001 / 00000001 / 00000000

   ===Flashing [PPM2]===
Erase : Processing rm469_034.001_C00.01_DEFAULT_prd.rofs3.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00 
Write : Processing rm469_034.001_C00.01_DEFAULT_prd.rofs3.fpsx
CMT: Writing Hash CERT [SOS+ROFS3]
Total writen 32 blocks
TIME : Write time : 00:00:10 
PPM Write done
ADL: Request programm status
NAND status : 00000001 / 00000001 / 00000000

   ===Flashing [CNT]===
Erase : Processing RM469_APE_ONLY_09w23v0.073.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00 
Write : Processing RM469_APE_ONLY_09w23v0.073.fpsx
CMT: Writing Hash CERT [SOS*ENO]
Total writen 12 blocks
TIME : Write time : 00:00:03 
CNT Write done
ADL: Request programm status
NAND status : 00000001 / 00000001 / 00000000

   ===Flashing [APE]===
Erase : Processing rm469_034.001_U001.000_prd.uda.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00 
Write : Processing rm469_034.001_U001.000_prd.uda.fpsx
Total writen 3 blocks
TIME : Write time : 00:00:01 
APE Write done
ADL: Request programm status
NAND status : 00000001 / 00000001 / 00000000

ADL: Close_Session
Content: 000300000000010000000100000000
ADL: Reboot

Flashing done!
Total flash time : 00:03:34
Reboot phone now...

Reading Phone Info....
Connected phone -   Nokia E52-1
Software Info:     V ICPR82_09w46.8 30-03-10 RM-469 (c) Nokia
IMEI:  355216033391858
Ape Version: 034.001
Product code:  0587587
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
FullFactorySet...OK!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Set phone to Normal mode...
AfterFlash operations done...
Done!

Elapsed: 00:04:19
Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info...  - Ok