Application log started
- J-Flash ARM V4.13a (J-Flash compiled Mar 2 2010 18:48:09)
- JLinkARM.dll V4.13a (DLL compiled Mar 2 2010 18:47:23)
Reading flash device list [C:\Program Files\SEGGER\JLinkARM_V413a\ETC\JFlash\Flash.csv] ...
- List of flash devices read successfully (670 Devices)
Reading MCU device list [C:\Program Files\SEGGER\JLinkARM_V413a\ETC\JFlash\MCU.csv] ...
- List of MCU devices read successfully (490 Devices)
Opening project file [C:\Program Files\SEGGER\JLinkARM_V413a\Default.jflash] ...
- Project opened successfully
Opening data file [C:\!\work\garmin_venture_hc\flash.mot] ...
- Data file opened successfully (8388608 bytes, 1 range, CRC = 0x00000000)
Connecting ...
- Connecting via USB to J-Link device 0
- J-Link firmware: V1.20 (J-Link compiled Jul 30 2008 11:24:37 ARM Rev.5)
- JTAG speed: 5 kHz (Fixed)
- Initializing CPU core (Init sequence) ...
- Initialized successfully
- JTAG speed: 8000 kHz (Auto)
- J-Link found 2 JTAG devices. Core ID: 0x00000001 (ARM7)
- Reading CFI info ...
- Could not find CFI compliant flash device
- Detecting flash memory ...
- ERROR: Could not find any flash devices
- ERROR: Failed to connect
Connecting ...
- Connecting via USB to J-Link device 0
- J-Link firmware: V1.20 (J-Link compiled Jul 30 2008 11:24:37 ARM Rev.5)
- JTAG speed: 5 kHz (Fixed)
- Initializing CPU core (Init sequence) ...
- Initialized successfully
- JTAG speed: 8000 kHz (Auto)
- J-Link found 2 JTAG devices. Core ID: 0x00000001 (ARM7)
- Reading CFI info ...
- CFI info read successfully
- Connected successfully
Erasing chip ...
- Erasing 142 sectors, 0x0 - 0x7FFFFF
- Erasing sector 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22
- Erase operation completed successfully - Completed after 63.746 sec
Opening data file [C:\!\work\garmin_venture_hc\fw_all.bin] ...
- Data file opened successfully (2605312 bytes, 1 range, CRC = 0x8A4A8384)
Programming and verifying target (2605312 bytes, 1 range) ...
- Programming target (2605312 bytes, 1 range) ...
- ERROR: Programming time out @ addr 0x00100000
- ERROR: Failed to program target
- ERROR: Failed to program and verify target
Disconnecting ...
- Disconnected
Connecting ...
- Connecting via USB to J-Link device 0
- J-Link firmware: V1.20 (J-Link compiled Jul 30 2008 11:24:37 ARM Rev.5)
- JTAG speed: 5 kHz (Fixed)
- Initializing CPU core (Init sequence) ...
- Initialized successfully
- JTAG speed: 8000 kHz (Auto)
- J-Link found 2 JTAG devices. Core ID: 0x00000001 (ARM7)
- Reading CFI info ...
- Could not find CFI compliant flash device
- Detecting flash memory ...
- ERROR: Could not find any flash devices
- ERROR: Failed to connect