Re: Тестирование Новых возможностей BEST'a -II
#126
N70 RM-84 прошит по USB normal mode. BEST 1.14.1
Развернуть для просмотра
Код:
Phone found!
Series 60 Device detected!
read info... - Ok
Selected FlashSettings : Manual
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : RM84_50737301.C0
PPM : RM84_50737301.V05
Flashing phone now...
Check files done...
-> SWversion check skipped : Manual mode selected
Backup CRT308 data...
CRT308 Backup Created... :)
Check communication with phone....
ADL Boot req
Communication verify done... Preparing...
Gathering phone info...
RAP_BOOT: 0802020002010000
RAP_PUBLIC: 03F0000171C34F579451B309D4380F3C1E15FC63
CMT_ROOTKEY: E9EFF4BFAA5393217CA6B17755FC3E14
RAP_PAPUBKEY: 0F72BF9DE5D6711B3B1133EBCAB5914FA419C78D
APE_ROOTKEY: 2C05369F57CC3C4CF9E783E83D9B512B
Check communication with phone...
CMT Loader len: 43416, CHK: 14E0
Sending CMT boot....
APE Loader len: 87032, CHK: AFBB
Sending APE boot....
Boot done
TIME : Boot time : 00:00:09
Reboot....
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
Waiting for response: 28
Waiting for response: 27
Waiting for response: 26
Waiting for response: 25
Waiting for response: 24
ADL Server confirm flashmode!
ADL : Auth skip
ADL : ASIC CMT select Ok
ADL : ASIC APE select Ok
===Flashing [MCU]===
Erase : Processing RM84_50737301.C0
Found 4 areas to erase
Erasing area 0x00000000 - 0x0052B515, NOR, CMT
Result: 0000
Erasing area 0x006A0000 - 0x006BFFFF, NOR, CMT
Result: 0000
Erasing area 0x006DF000 - 0x006EFFFF, NOR, CMT
Result: 0000
Erasing area 0x00700000 - 0x007EFFFF, NOR, CMT
Result: 0000
Found 4 areas to erase
Erasing area 0x00000000 - 0x0000FFFF, NAND, APE
Result: 0000
Erasing area 0x00010000 - 0x0001FFFF, NAND, APE
Result: 0000
Erasing area 0x00020000 - 0x000203FF, NAND, APE
Result: 0000
Erasing area 0x00050000 - 0x03ECFFFF, NAND, APE
Result: 0000
Partitioning : Ok [4]
TIME : Erase time : 00:00:44
Write : Processing RM84_50737301.C0
Total 1126 [308/818/0] blocks to write, writing...
CMT : Writing Hash CERT [NOLO]
CMT : Writing Hash CERT [KEYS]
CMT : Writing Hash CERT [PRIMAPP]
CMT : Writing Hash CERT [DSP0]
CMT : Writing Hash CERT [MCUSW]
CMT : Writing Hash CERT [PASUBTOC]
CMT : Writing Hash CERT [PAPUBKEYS]
CMT : Writing Hash CERT [PAPUBKEYS]
CMT : PAPUBKEYS skip, already sent
APE : Writing Hash CERT [KEYS]
APE : Writing Hash CERT [X-LOADER]
APE : Writing Hash CERT [PRIMAPP]
APE : Writing Hash CERT [SOS+LOADER]
APE : Writing Hash CERT [SOS+XZIP]
APE : Writing Hash CERT [PASUBTOC]
APE : Writing Hash CERT [PAPUBKEYS]
APE : Writing Hash CERT [PAPUBKEYS]
APE : PAPUBKEYS skip, already sent
APE : Writing Hash CERT [SOS*CORE]
TIME : Write time : 00:03:01
MCU Write done
===Flashing [PPM]===
Erase : Processing RM84_50737301.V05
Found 2 areas to erase
Erasing area 0x01AE0000 - 0x02AFFFFF, NAND, APE
Result: 0000
Erasing area 0x02B00000 - 0x03ECFFFF, NAND, APE
Result: 0000
Partitioning : Ok [4]
TIME : Erase time : 00:00:04
Write : Processing RM84_50737301.V05
Total 1489 [0/1489/0] blocks to write, writing...
TIME : Write time : 00:01:01
PPM Write done
=================
ADL : End flashing
ADL : Close CMT session Ok
ADL : Close APE session Ok
Flashing done!
Total flash time : 00:04:51
Reboot phone now...
Reading Phone Info....
Connected phone - Nokia N70
Software Info: V 05wk07v48.1 28-08-07 RM-84 (c) Nokia.
IMEI: 357XXXXXXXXX885
Ape Version: V 5.0737.3.0.1 13-09-07 RM-84 (C)Nokia
Product code: 0524007
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
ProductTuneSet...OK!
SwUpgradeSet...OK!
AfterFlash operations done... Reconnect, wait...
Done!
Elapsed: 00:05:57
[свернуть]
6120c RM-243 прошит по USB normal mode.
Развернуть для просмотра
Код:
Phone found!
Series 60 Device detected!
read info... - Ok
Reading Phone Info....
Connected phone - Nokia 6120
Software ver : V 04.21 04-10-07 RM-243 (c) Nokia
IMEI : 359XXXXXXXXX886
Ape Ver : 04.21
APE Var : Vr RUSSIAN 01-12-06 RM-243
APE ADSP: 256
DSP Ver : 06w41pb_07w40.0.1_rm243
APE Test: rm243_ENO_x_2007wk24v0.01
PPM :
CNT :
Product SN : MOH980852
Product code : 0546338
Base Prd.code: 0539292
Module code :
Long Prod.SN : 0
Hardware info=======
HWID : 0801
Retu : 15
Tahvo : 22
Batery: 3917 mV
Camera:
CMT BT:
APE BT: HCI Version 8 (rev. 0). LMP Version 32 (rev. 4127). Manufacturer 13064.
APE HW: 256
LCDVer:
RF ic :
Lock info ===========
IMEI : 359XXXXXXXXX886
IMEI spNet : 3A 95 XX XX XX XX 81 08
IMEI svNet : 33 95 XX XX XX XX 81 38 F2
Conf key : 0000000000000000
Provider key : 2440700000000000
Provider : AT&T;U.S.A. (3650)
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 7
LOCK STATUS :
=============================
BLK : 1
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS : All Open
=============================
CRT308 Backup Created... :)
User Code : 96545
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery]
Done!
Searching for MMC pwd...
Generation : [S60]
Check phone mode...
Phone in RfInactive mode
Seting Test mode... wait...
Test mode set
SmartPhone algo initialise...
Setup data...
StartUp FileSystem...
Fsrun OK...
Detect Symbian OS Generation...
Detected: [Symbian OS 9.1/9.2] Phone!
Running : APE_TEST_SERVER,w05_07,(c)NMP
Password Base not found at all :(
Error during read...
Set phone in Normal mode...
Restarting...
Done!
Selected FlashSettings : Manual
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : rm243_06.01_prd_core.fpsx
PPM : rm243_06.01_prd_vB05_01_russian.fpsx
CNT : rm243_06.01_prd_UDA_Nokia_Noir.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Manual mode selected
Backup CRT308 data...
CRT308 Backup Created... :)
SimLock Data saved...
SimLock Key saved...
RPL saved : c:\Program Files\InfinityBox\BESTv1.14.1\Backup\Cert\359XXXXXXXXX886_SIM.rpl
Check communication with phone....
ADL req restart
Communication verify done... Preparing...
Gathering phone info...
Check communication with phone...
Reboot....
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000010000022600010006400C192101021103
EM0 ID: 00000295
EM1 ID: 00000B22
PUBLIC ID: 1B60000D3C630052F21714337DF61D273710DB1E
ASIC MODE ID: 00
ROOT KEY HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID: A8C1D6713E691FF8
PatchRAWLoader: Patched OK
Processing RAWLOADER...
Processing UPDAPP...
Processing UPDAPP...
Boot Done! :)
TIME : Boot time : 00:00:06
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
Waiting for response: 28
Waiting for response: 27
Waiting for response: 26
Waiting for response: 25
Waiting for response: 24
Waiting for response: 23
Waiting for response: 22
Waiting for response: 21
Waiting for response: 20
ADL Server confirm flashmode!
Get req info : empty
ADL : ASIC CMT select Ok
===Flashing [MCU]===
Erase : Processing rm243_06.01_prd_core.fpsx
Found 3 areas to erase
Erasing area 0x00040000 - 0x00082FFF, NAND, CMT
Result: 0000
Erasing area 0x00083400 - 0x0087FFFF, NAND, CMT
Result: 0000
Erasing area 0x00B80000 - 0x04DFFFFF, NAND, CMT
Result: 0000
Partition erase not allowed by loader
Partitioning : Ok [5]
TIME : Erase time : 00:00:01
Write : Processing rm243_06.01_prd_core.fpsx
Total 385 [385/0/0] blocks to write, writing...
CMT : Writing Hash CERT [ADA]
CMT : Writing Hash CERT [KEYS]
CMT : Writing Hash CERT [PRIMAPP]
CMT : Writing Hash CERT [RAP3NAND]
CMT : Writing Hash CERT [PASUBTOC]
CMT : Writing Hash CERT [PAPUBKEYS]
CMT : Writing Hash CERT [SOS*UPDAPP]
CMT : Writing Hash CERT [SOS*DSP0]
CMT : Writing Hash CERT [SOS*ISASW]
CMT : Writing Hash CERT [SOS*CORE]
CMT : Writing Hash CERT [SOS+ROFS]
TIME : Write time : 00:01:28
MCU Write done
===Flashing [PPM]===
Erase : Processing rm243_06.01_prd_vB05_01_russian.fpsx
Found 1 areas to erase
Erasing area 0x03300000 - 0x04DFFFFF, NAND, CMT
Result: 0000
TIME : Erase time : 00:00:00
Write : Processing rm243_06.01_prd_vB05_01_russian.fpsx
Total 178 [178/0/0] blocks to write, writing...
CMT : Writing Hash CERT [SOS+ROFX]
TIME : Write time : 00:00:46
PPM Write done
===Flashing [CNT]===
Erase : Processing rm243_06.01_prd_UDA_Nokia_Noir.fpsx
Found 1 areas to erase
Erasing area 0x04E00000 - 0x07B3FFFF, NAND, CMT
Result: 0000
TIME : Erase time : 00:00:00
Write : Processing rm243_06.01_prd_UDA_Nokia_Noir.fpsx
Total 1 [1/0/0] blocks to write, writing...
TIME : Write time : 00:00:00
CNT Write done
=================
ADL : End flashing
ADL : Finalize...
Flashing done!
Total flash time : 00:02:16
Reboot phone now...
Reading Phone Info....
Connected phone - Nokia 6120
Software Info: V 06.01 02-09-08 RM-243 (c) Nokia
IMEI: 359XXXXXXXXX886
Ape Version: 06.01
Product code: 0546338
Checking...
SimLock status : Can't get status
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
FullFactorySet...OK!
ProductTuneSet...OK!
SwUpgradeSet...OK!
AfterFlash operations done... Reconnect, wait...
Done!
Elapsed: 00:03:12
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok
Reading Phone Info....
Connected phone - Nokia 6120
Software ver : V 06.01 02-09-08 RM-243 (c) Nokia
IMEI : 359XXXXXXXXX886
Ape Ver : 06.01
APE Var : rofs_version_inforofx_version_info
APE ADSP: 256
DSP Ver : 06w41pb_08w28.0.1_rm243
APE Test: rm243_ENO_x_2007wk24v0.01
PPM :
CNT :
Product SN : MOH980852
Product code : 0546338
Base Prd.code: 0539292
Module code :
Long Prod.SN : 0
Hardware info=======
HWID : 0801
Retu : 15
Tahvo : 22
Batery: 3750 mV
Camera:
CMT BT:
APE BT:
APE HW: 256
LCDVer:
RF ic :
Lock info ===========
IMEI : 359XXXXXXXXX886
IMEI spNet : 3A 95 XX XX XX XX 81 08
IMEI svNet : 33 95 XX XX XX XX 81 48 F2
Conf key : 0000000000000000
Provider key : 2440700000000000
Provider : AT&T;U.S.A. (3650)
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 7
LOCK STATUS :
=============================
BLK : 1
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS : All Open
=============================
CRT308 Backup Created... :)
User Code : 12345
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery]
Done!
[свернуть]
C5 RM-645 прошит USB normal mode.
Развернуть для просмотра
Код:
Phone found!
Series 60 Device detected!
read info... - Ok
Reading Phone Info....
Connected phone - Nokia C5-00
Software ver : V ICPR82_10w08 26-02-10 RM-645 (c) Nokia
IMEI : 353XXXXXXXXX970
Ape Ver : 031.022
APE Var : 031.022031.022.10.01031.022.C00.01
APE ADSP: 256
DSP Ver : ICPR82_10w08
APE Test: rm645_ENO_v_0.LV001
PPM :
CNT :
Product SN : CZE673969
Product code : 0593735
Base Prd.code: 0592655
Module code : 0204492
Long Prod.SN : 0
Hardware info=======
HWID : 6000
Retu : 35
Tahvo : 00
Batery: 3918 mV
Camera:
CMT BT:
APE BT: HCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12652.
APE HW: 256
LCDVer:
RF ic :
Lock info ===========
IMEI : 353XXXXXXXXX970
IMEI spNet : 3A 35 XX XX XX XX 99 07
IMEI svNet : 33 35 XX XX XX XX 99 17 F0
Conf key : 0000000000000000
Provider key : 2440700000000000
Provider : AT&T;U.S.A. (3650)
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 7
LOCK STATUS :
=============================
BLK : 1
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS : All Open
=============================
CRT308 Backup Created... :)
User code : Crypted
UserDataExLevel : Low [Gallery]
Done!
Selected FlashSettings : Manual
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : rm645_061.005_prd.core.fpsx
PPM : rm645_061.005_05.01_Russian_prd.rofs2.fpsx
PPM2 : rm645_061.005_C00.01_DEFAULT_prd.rofs3.fpsx
CNT : rm645_ENO_v_0.NCP17_APEONLY.fpsx
APE : rm645_061.005_U000.000_prd.uda.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Manual mode selected
Backup CRT308 data...
CRT308 Backup Created... :)
Check communication with phone....
ADL req restart
Communication verify done... Preparing...
Gathering phone info...
Check communication with phone...
Reboot....
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000030000022600010007600C192102031104
EM0 ID: 00000C35
EM1 ID: 00000C30
PUBLIC ID: 2BD00113441F0049CACD352FE58B4EA91297F8A9
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
Use RAPUv11_2nd.fg Rev : 3.0 Ver : 10.46.0
Processing RAWLOADER...
FLIC : 00400020
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg Rev : 3.0 Ver : 10.46.0
Boot Done! :)
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
ADL: phone is in flash mode
Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 353XXXXXXXXX970
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Cert Read done!
NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
SimLock Data saved...
SimLock Key saved...
WMDRM_PD Data saved...
RPL saved : c:\Program Files\InfinityBox\BESTv1.14.1\Backup\Cert\353XXXXXXXXX970.rpl
===Flashing [MCU]===
Erase : Processing rm645_061.005_prd.core.fpsx
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01
Write : Processing rm645_061.005_prd.core.fpsx
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [SOS+PMML]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [SOS*UPDAPP]
CMT: Writing Hash CERT [SOS*DSP0]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [SOS*ISASW]
CMT: Writing Hash CERT [SOS+CORE]
CMT: Writing Hash CERT [SOS+ROFS1]
Total writen 393 blocks
TIME : Write time : 00:00:23
MCU Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000
===Flashing [PPM]===
Erase : Processing rm645_061.005_05.01_Russian_prd.rofs2.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm645_061.005_05.01_Russian_prd.rofs2.fpsx
CMT: Writing Hash CERT [SOS+ROFS2]
Total writen 192 blocks
TIME : Write time : 00:00:11
PPM Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000
===Flashing [PPM2]===
Erase : Processing rm645_061.005_C00.01_DEFAULT_prd.rofs3.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm645_061.005_C00.01_DEFAULT_prd.rofs3.fpsx
CMT: Writing Hash CERT [SOS+ROFS3]
Total writen 2 blocks
TIME : Write time : 00:00:00
PPM Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000
===Flashing [CNT]===
Erase : Processing rm645_ENO_v_0.NCP17_APEONLY.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm645_ENO_v_0.NCP17_APEONLY.fpsx
CMT: Writing Hash CERT [SOS*ENO]
Total writen 11 blocks
TIME : Write time : 00:00:00
CNT Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000
===Flashing [APE]===
Erase : Processing rm645_061.005_U000.000_prd.uda.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm645_061.005_U000.000_prd.uda.fpsx
Total writen 8 blocks
TIME : Write time : 00:00:00
APE Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000
ADL: Close_Session
Content: 000300000000000000000000000000
ADL: Reboot
Flashing done!
Total flash time : 00:00:40
Reboot phone now...
-> Flashing Failed! :( Maybee HW error, or Downgrade try???!
Anyway - try reinsert battery and PowerUp phone manualy
Connect phone on selected interface...
Done!
Elapsed: 00:03:31
[свернуть]
Несмотря на надпись:
-> Flashing Failed! 
Maybee HW error, or Downgrade try???!
Anyway - try reinsert battery and PowerUp phone manualy
Телефон нормально включился и работает.
6303 RM-443 чтение инфо через UFS. В большинстве строк только Error.
Развернуть для просмотра
Код:
card found: S/N XXXX:XXXX
registered to: Devastator
Connect phone on selected interface...
UFS S/N XXXXX boot - Ok
Connect phone on selected interface...
Phone found!
Series 40 Device detected!
read info... - Ok
Reading Phone Info....
SW ver : V 10.12 08-04-10 RM-443 (c) Nokia
IMEI : Error
PPM : Error
CNT : Content: i_bg_ua_steel
V 10.12
08-04-10
RM-443
(c) Nokia
DSP Ver : Error
PCode : Error
BPCode : Error
HWID : Error
LCDVer : Error
IMEI : Error
Sl Conf : --
Sl Prof : -
Sl Aux :
Hw Sig :
Provider : Unknown providers
Lock info:
Done!
[свернуть]