Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info...  - Ok

Backup Certificates now...
Backup CRT308 data...
CRT308 Backup Created... :)
Check communication with phone....
Reboot....
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID:       000000010000022600010006400C192101051103
EM0 ID:        00000296
EM1 ID:        00000B22
PUBLIC ID:     1EB0000A166A025208D192A62D4EFA947D138413
ASIC MODE ID:  00
ROOT KEY HASH: 479C6DDE3942E12C429C1D6ADED80371
ROM ID:        4B9B75103E691FF8
Error finding bootdata or ASIC not supported!

Looks like ASIC not supported, or HW failure
Supported : RapuYama, RAP3Gv4, BroadComm
Try Flash latest SW and repeat, if phone in supported list

SimLock Data saved...
SimLock Key saved...
WMDRM_PD Data saved...

RPL saved : D:\Работа\Программаторы\Infiniti\BEST_v1.14.1\Backup\Cert\354839049878716_SIM.rpl

Phone disconected!

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info...  - Ok

Read and Check phone data...
----------------------
RAP_BOOT:  0B01010502010000
RAP_PUB:   1EB0000A166A025208D192A62D4EFA947D138413
CMT_ROOT:  479C6DDE3942E12C429C1D6ADED80371
RAP_PAPUB: 505A5C85580A6322C103BFE4E67B73EF478E791C
----------------------
Live Test Ok!
----------------------
CMT Flash ID : 005000EC < UNKNOW [NOT IN BASE]
------------------------
SDD Key status : SD Data is Ok
SimLock status : SimLock is Ok
Security status : Security is Ok

PA_SimLock Version : 
PA_SL3 phone detected

Done!

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : RM-612_20.0.042_prd.core.C00
PPM : RM-612_20.0.042_prd.rofs2.V19
PPM2 : RM-612_20.0.042_C01_prd.rofs3.fpsx
CNT : RM-612_20.0.042_uda_12_001.uda.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Manual mode selected
Backup CRT308 data...
CRT308 Backup Created... :)
SimLock Data saved...
SimLock Key saved...
WMDRM_PD Data saved...

RPL saved : D:\Работа\Программаторы\Infiniti\BEST_v1.14.1\Backup\Cert\354839049878716_SIM_2nd.rpl

Check communication with phone....
ADL req restart
Communication verify done... Preparing...
Gathering phone info...
Check communication with phone...
Batery valtage : 3794 mV
-> Batery voltage less, than 3,8V (3794mV). Continue at user risk
Reboot....
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID:       000000010000022600010006400C192101051103
EM0 ID:        00000296
EM1 ID:        00000B22
PUBLIC ID:     1EB0000A166A025208D192A62D4EFA947D138413
ASIC MODE ID:  00
ROOT KEY HASH: 479C6DDE3942E12C429C1D6ADED80371
ROM ID:        4B9B75103E691FF8
PatchRAWLoader: Patched OK
Processing RAWLOADER...
Processing UPDAPP...
Processing UPDAPP...
Processing PAPUBKEYS...
Processing UPDAPP...
Boot Done! :)
TIME : Boot time : 00:00:05
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL -> [2nd] changing...
ADL Server confirm flashmode!
ADL : Auth done...
ADL : ASIC CMT select Ok
   ===Flashing [MCU]===
Erase : Processing RM-612_20.0.042_prd.core.C00
Found 4 areas to erase
Erasing area 0x00040000 - 0x00082FFF, NAND, CMT
Result: 0000
Erasing area 0x00083400 - 0x003FFFFF, NAND, CMT
Result: 0000
Erasing area 0x00800000 - 0x00D5FFFF, NAND, CMT
Result: 0000
Erasing area 0x00D60000 - 0x0D39FFFF, NAND, CMT
Result: 0000
Erase partition 0x0A
Partition erase Ok
Partitioning : Ok [5]
TIME : Erase time : 00:00:01
Write : Processing RM-612_20.0.042_prd.core.C00
Total 478 [478/0/0] blocks to write, writing... 
CMT : Writing Hash CERT [ADA]
CMT : Writing Hash CERT [KEYS]
CMT : Writing Hash CERT [PRIMAPP]
CMT : Writing Hash CERT [RAP3NAND]
CMT : Writing Hash CERT [PASUBTOC]
CMT : Writing Hash CERT [PAPUBKEYS]
CMT : Writing Hash CERT [SOS*UPDAPP]
CMT : Writing Hash CERT [SOS*DSP0]
CMT : Writing Hash CERT [SOS*ISASW]
CMT : Writing Hash CERT [SOS+CORE]
CMT : Writing Hash CERT [SOS+ROFS1]
TIME : Write time : 00:00:42
MCU Write done
   ===Flashing [PPM]===
Erase : Processing RM-612_20.0.042_prd.rofs2.V19
Found 1 areas to erase
Erasing area 0x094A0000 - 0x0C49FFFF, NAND, CMT
Result: 0000
TIME : Erase time : 00:00:00
Write : Processing RM-612_20.0.042_prd.rofs2.V19
Total 111 [111/0/0] blocks to write, writing... 
CMT : Writing Hash CERT [SOS+ROFS2]
TIME : Write time : 00:00:09
PPM Write done
   ===Flashing [PPM2]===
Erase : Processing RM-612_20.0.042_C01_prd.rofs3.fpsx
Found 1 areas to erase
Erasing area 0x0C4A0000 - 0x0D39FFFF, NAND, CMT
Result: 0000
TIME : Erase time : 00:00:00
Write : Processing RM-612_20.0.042_C01_prd.rofs3.fpsx
Total 5 [5/0/0] blocks to write, writing... 
CMT : Writing Hash CERT [SOS+ROFS3]
TIME : Write time : 00:00:00
PPM Write done
   ===Flashing [CNT]===
Erase : Processing RM-612_20.0.042_uda_12_001.uda.fpsx
Found 1 areas to erase
Erasing area 0x0D3C0000 - 0x1EF7FFFF, NAND, CMT
Result: 0000
TIME : Erase time : 00:00:00
Write : Processing RM-612_20.0.042_uda_12_001.uda.fpsx
Total 58 [58/0/0] blocks to write, writing... 
TIME : Write time : 00:00:05
CNT Write done
 =================
ADL : End flashing
ADL : Finalize...

Flashing done!
Total flash time : 00:00:58
Reboot phone now...

Reading Phone Info....
Connected phone -   Nokia C6-00
Software Info:     V ICPR72_10w28.3 09-11-10 RM-612 (c) Nokia
IMEI:  354839049878716
Ape Version: v 20.0.042
Product code:  0596313
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
FullFactorySet...OK!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Resetting LifeTimer
Reset Done!
AfterFlash operations done... Reconnect, wait...
Done!

Elapsed: 00:01:27
Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info...  - Ok