COM1 selected
module  v3.22
Device: Autodetect 6228-6239 NAND
Checking data, wait...
Action: write flash NAND
write: Firmware
KP320-00-V10f-CIS-XX-JUL-01-2008_A7610_07A_PCB03_GPRS_MT6229_S02.7S7610RU00-001-R1Y_En_Ru_Kz.B4M.bin
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
nfi area detection...
external bootloader is not present
bootloader version: A7610_07A_BOOTLOADER_V005_MT6229_7S7610RU00-001-R1Y.bin
nfi area detection (3 cores) finished: Ok
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6229:8A02:8A02
status: FF
bbchip bl ver: FE
NOR flash chip: not installed
NAND flash id[0014]: 0098:00F100900095 [TOSHIBA] TC58NVG0S3AFT
chip size: 128Mb
page/spare size: 0800/0040
pages per block: 0040
bits i/o: 08
address cycles: 04
internal RAM size: 00020000
external RAM: S_DA_RAM_ERROR
done
Set baudrate (921600)...
done
ram test...
testing...
ram test passed
===>  detect existing firmware structure...
detect ffs...
detect sec ro...
detect custom parameters...
detect project-id...
detect NAND info...
number of areas/bytes to read: 1:00080000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
nfi area detection...
warning: incorrect header: 024F0F540C4F01440552210016303035
warning: can not detect header
nfi area detection (0 cores) finished: failed
warning: ffs can not be detected
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
startup code area #1 detection done
code offset: 00000000
===>  done
nfi area detection...
external bootloader is not present
bootloader version: A7610_07A_BOOTLOADER_V005_MT6229_7S7610RU00-001-R1Y.bin
nfi area detection (3 cores) finished: Ok
startup code area #1 check...
error: done
number of cores: 3
loading files...
number of areas: 3
done
write...
write bootloader...
.
write core...
error: can not write flash: 0BEA:S_DA_NFB_BOOTLOADER_NOT_EXIST
error: last error: 0BEA:S_DA_NFB_BOOTLOADER_NOT_EXIST
Disconnect...
done
Finished, time used: 43 sec
Remove/Install battery now !